linux-stable.git/fs, branch v5.4.71

cifs: Fix incomplete memory allocation on setxattr path

2020-10-14T08:33:01+00:00

commit 64b7f674c292207624b3d788eda2dde3dc1415df upstream.

On setxattr() syscall path due to an apprent typo the size of a dynamically
allocated memory chunk for storing struct smb2_file_full_ea_info object is
computed incorrectly, to be more precise the first addend is the size of
a pointer instead of the wanted object size. Coincidentally it makes no
difference on 64-bit platforms, however on 32-bit targets the following
memcpy() writes 4 bytes of data outside of the dynamically allocated memory.

  =============================================================================
  BUG kmalloc-16 (Not tainted): Redzone overwritten
  -----------------------------------------------------------------------------

  Disabling lock debugging due to kernel taint
  INFO: 0x79e69a6f-0x9e5cdecf @offset=368. First byte 0x73 instead of 0xcc
  INFO: Slab 0xd36d2454 objects=85 used=51 fp=0xf7d0fc7a flags=0x35000201
  INFO: Object 0x6f171df3 @offset=352 fp=0x00000000

  Redzone 5d4ff02d: cc cc cc cc cc cc cc cc cc cc cc cc cc cc cc cc  ................
  Object 6f171df3: 00 00 00 00 00 05 06 00 73 6e 72 75 62 00 66 69  ........snrub.fi
  Redzone 79e69a6f: 73 68 32 0a                                      sh2.
  Padding 56254d82: 5a 5a 5a 5a 5a 5a 5a 5a                          ZZZZZZZZ
  CPU: 0 PID: 8196 Comm: attr Tainted: G    B             5.9.0-rc8+ #3
  Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.13.0-1 04/01/2014
  Call Trace:
   dump_stack+0x54/0x6e
   print_trailer+0x12c/0x134
   check_bytes_and_report.cold+0x3e/0x69
   check_object+0x18c/0x250
   free_debug_processing+0xfe/0x230
   __slab_free+0x1c0/0x300
   kfree+0x1d3/0x220
   smb2_set_ea+0x27d/0x540
   cifs_xattr_set+0x57f/0x620
   __vfs_setxattr+0x4e/0x60
   __vfs_setxattr_noperm+0x4e/0x100
   __vfs_setxattr_locked+0xae/0xd0
   vfs_setxattr+0x4e/0xe0
   setxattr+0x12c/0x1a0
   path_setxattr+0xa4/0xc0
   __ia32_sys_lsetxattr+0x1d/0x20
   __do_fast_syscall_32+0x40/0x70
   do_fast_syscall_32+0x29/0x60
   do_SYSENTER_32+0x15/0x20
   entry_SYSENTER_32+0x9f/0xf2

Fixes: 5517554e4313 ("cifs: Add support for writing attributes on SMB2+")
Signed-off-by: Vladimir Zapolskiy 
Signed-off-by: Linus Torvalds 
Signed-off-by: Greg Kroah-Hartman

btrfs: allow btrfs_truncate_block() to fallback to nocow for data space reservation

2020-10-14T08:33:00+00:00

commit 6d4572a9d71d5fc2affee0258d8582d39859188c upstream.

[BUG]
When the data space is exhausted, even if the inode has NOCOW attribute,
we will still refuse to truncate unaligned range due to ENOSPC.

The following script can reproduce it pretty easily:
  #!/bin/bash

  dev=/dev/test/test
  mnt=/mnt/btrfs

  umount $dev &> /dev/null
  umount $mnt &> /dev/null

  mkfs.btrfs -f $dev -b 1G
  mount -o nospace_cache $dev $mnt
  touch $mnt/foobar
  chattr +C $mnt/foobar

  xfs_io -f -c "pwrite -b 4k 0 4k" $mnt/foobar > /dev/null
  xfs_io -f -c "pwrite -b 4k 0 1G" $mnt/padding &> /dev/null
  sync

  xfs_io -c "fpunch 0 2k" $mnt/foobar
  umount $mnt

Currently this will fail at the fpunch part.

[CAUSE]
Because btrfs_truncate_block() always reserves space without checking
the NOCOW attribute.

Since the writeback path follows NOCOW bit, we only need to bother the
space reservation code in btrfs_truncate_block().

[FIX]
Make btrfs_truncate_block() follow btrfs_buffered_write() to try to
reserve data space first, and fall back to NOCOW check only when we
don't have enough space.

Such always-try-reserve is an optimization introduced in
btrfs_buffered_write(), to avoid expensive btrfs_check_can_nocow() call.

This patch will export check_can_nocow() as btrfs_check_can_nocow(), and
use it in btrfs_truncate_block() to fix the problem.

Reported-by: Martin Doucha 
Reviewed-by: Filipe Manana 
Reviewed-by: Anand Jain 
Signed-off-by: Qu Wenruo 
Reviewed-by: David Sterba 
Signed-off-by: David Sterba 
Signed-off-by: Anand Jain 
Signed-off-by: Greg Kroah-Hartman

btrfs: fix RWF_NOWAIT write not failling when we need to cow

2020-10-14T08:33:00+00:00

commit 260a63395f90f67d6ab89e4266af9e3dc34a77e9 upstream.

If we attempt to do a RWF_NOWAIT write against a file range for which we
can only do NOCOW for a part of it, due to the existence of holes or
shared extents for example, we proceed with the write as if it were
possible to NOCOW the whole range.

Example:

  $ mkfs.btrfs -f /dev/sdb
  $ mount /dev/sdb /mnt

  $ touch /mnt/sdj/bar
  $ chattr +C /mnt/sdj/bar

  $ xfs_io -d -c "pwrite -S 0xab -b 256K 0 256K" /mnt/bar
  wrote 262144/262144 bytes at offset 0
  256 KiB, 1 ops; 0.0003 sec (694.444 MiB/sec and 2777.7778 ops/sec)

  $ xfs_io -c "fpunch 64K 64K" /mnt/bar
  $ sync

  $ xfs_io -d -c "pwrite -N -V 1 -b 128K -S 0xfe 0 128K" /mnt/bar
  wrote 131072/131072 bytes at offset 0
  128 KiB, 1 ops; 0.0007 sec (160.051 MiB/sec and 1280.4097 ops/sec)

This last write should fail with -EAGAIN since the file range from 64K to
128K is a hole. On xfs it fails, as expected, but on ext4 it currently
succeeds because apparently it is expensive to check if there are extents
allocated for the whole range, but I'll check with the ext4 people.

Fix the issue by checking if check_can_nocow() returns a number of
NOCOW'able bytes smaller then the requested number of bytes, and if it
does return -EAGAIN.

Fixes: edf064e7c6fec3 ("btrfs: nowait aio support")
CC: stable@vger.kernel.org # 4.14+
Signed-off-by: Filipe Manana 
Reviewed-by: David Sterba 
Signed-off-by: David Sterba 
Signed-off-by: Anand Jain 
Signed-off-by: Greg Kroah-Hartman

btrfs: Ensure we trim ranges across block group boundary

2020-10-14T08:33:00+00:00

commit 6b7faadd985c990324b5b5bd18cc4ba5c395eb65 upstream.

[BUG]
When deleting large files (which cross block group boundary) with
discard mount option, we find some btrfs_discard_extent() calls only
trimmed part of its space, not the whole range:

  btrfs_discard_extent: type=0x1 start=19626196992 len=2144530432 trimmed=1073741824 ratio=50%

type:		bbio->map_type, in above case, it's SINGLE DATA.
start:		Logical address of this trim
len:		Logical length of this trim
trimmed:	Physically trimmed bytes
ratio:		trimmed / len

Thus leaving some unused space not discarded.

[CAUSE]
When discard mount option is specified, after a transaction is fully
committed (super block written to disk), we begin to cleanup pinned
extents in the following call chain:

btrfs_commit_transaction()
|- btrfs_finish_extent_commit()
   |- find_first_extent_bit(unpin, 0, &start, &end, EXTENT_DIRTY);
   |- btrfs_discard_extent()

However, pinned extents are recorded in an extent_io_tree, which can
merge adjacent extent states.

When a large file gets deleted and it has adjacent file extents across
block group boundary, we will get a large merged range like this:

      |<---    BG1    --->|<---      BG2     --->|
      |//////|<--   Range to discard   --->|/////|

To discard that range, we have the following calls:

  btrfs_discard_extent()
  |- btrfs_map_block()
  |  Returned bbio will end at BG1's end. As btrfs_map_block()
  |  never returns result across block group boundary.
  |- btrfs_issuse_discard()
     Issue discard for each stripe.

So we will only discard the range in BG1, not the remaining part in BG2.

Furthermore, this bug is not that reliably observed, for above case, if
there is no other extent in BG2, BG2 will be empty and btrfs will trim
all space of BG2, covering up the bug.

[FIX]
- Allow __btrfs_map_block_for_discard() to modify @length parameter
  btrfs_map_block() uses its @length paramter to notify the caller how
  many bytes are mapped in current call.
  With __btrfs_map_block_for_discard() also modifing the @length,
  btrfs_discard_extent() now understands when to do extra trim.

- Call btrfs_map_block() in a loop until we hit the range end Since we
  now know how many bytes are mapped each time, we can iterate through
  each block group boundary and issue correct trim for each range.

Reviewed-by: Filipe Manana 
Reviewed-by: Nikolay Borisov 
Tested-by: Nikolay Borisov 
Reviewed-by: Josef Bacik 
Signed-off-by: Qu Wenruo 
Signed-off-by: David Sterba 
Signed-off-by: Anand Jain 
Signed-off-by: Greg Kroah-Hartman

btrfs: volumes: Use more straightforward way to calculate map length

2020-10-14T08:32:59+00:00

commit 2d974619a77f106f3d1341686dea95c0eaad601f upstream.

The old code goes:

 	offset = logical - em->start;
	length = min_t(u64, em->len - offset, length);

Where @length calculation is dependent on offset, it can take reader
several more seconds to find it's just the same code as:

 	offset = logical - em->start;
	length = min_t(u64, em->start + em->len - logical, length);

Use above code to make the length calculate independent from other
variable, thus slightly increase the readability.

Reviewed-by: Johannes Thumshirn 
Reviewed-by: Josef Bacik 
Signed-off-by: Qu Wenruo 
Reviewed-by: David Sterba 
Signed-off-by: David Sterba 
Signed-off-by: Anand Jain 
Signed-off-by: Greg Kroah-Hartman

Btrfs: send, fix emission of invalid clone operations within the same file

2020-10-14T08:32:59+00:00

commit 9722b10148504c4153a74a9c89725af271e490fc upstream.

When doing an incremental send and a file has extents shared with itself
at different file offsets, it's possible for send to emit clone operations
that will fail at the destination because the source range goes beyond the
file's current size. This happens when the file size has increased in the
send snapshot, there is a hole between the shared extents and both shared
extents are at file offsets which are greater the file's size in the
parent snapshot.

Example:

  $ mkfs.btrfs -f /dev/sdb
  $ mount /dev/sdb /mnt/sdb

  $ xfs_io -f -c "pwrite -S 0xf1 0 64K" /mnt/sdb/foobar
  $ btrfs subvolume snapshot -r /mnt/sdb /mnt/sdb/base
  $ btrfs send -f /tmp/1.snap /mnt/sdb/base

  # Create a 320K extent at file offset 512K.
  $ xfs_io -c "pwrite -S 0xab 512K 64K" /mnt/sdb/foobar
  $ xfs_io -c "pwrite -S 0xcd 576K 64K" /mnt/sdb/foobar
  $ xfs_io -c "pwrite -S 0xef 640K 64K" /mnt/sdb/foobar
  $ xfs_io -c "pwrite -S 0x64 704K 64K" /mnt/sdb/foobar
  $ xfs_io -c "pwrite -S 0x73 768K 64K" /mnt/sdb/foobar

  # Clone part of that 320K extent into a lower file offset (192K).
  # This file offset is greater than the file's size in the parent
  # snapshot (64K). Also the clone range is a bit behind the offset of
  # the 320K extent so that we leave a hole between the shared extents.
  $ xfs_io -c "reflink /mnt/sdb/foobar 448K 192K 192K" /mnt/sdb/foobar

  $ btrfs subvolume snapshot -r /mnt/sdb /mnt/sdb/incr
  $ btrfs send -p /mnt/sdb/base -f /tmp/2.snap /mnt/sdb/incr

  $ mkfs.btrfs -f /dev/sdc
  $ mount /dev/sdc /mnt/sdc

  $ btrfs receive -f /tmp/1.snap /mnt/sdc
  $ btrfs receive -f /tmp/2.snap /mnt/sdc
  ERROR: failed to clone extents to foobar: Invalid argument

The problem is that after processing the extent at file offset 256K, which
refers to the first 128K of the 320K extent created by the buffered write
operations, we have 'cur_inode_next_write_offset' set to 384K, which
corresponds to the end offset of the partially shared extent (256K + 128K)
and to the current file size in the receiver. Then when we process the
extent at offset 512K, we do extent backreference iteration to figure out
if we can clone the extent from some other inode or from the same inode,
and we consider the extent at offset 256K of the same inode as a valid
source for a clone operation, which is not correct because at that point
the current file size in the receiver is 384K, which corresponds to the
end of last processed extent (at file offset 256K), so using a clone
source range from 256K to 256K + 320K is invalid because that goes past
the current size of the file (384K) - this makes the receiver get an
-EINVAL error when attempting the clone operation.

So fix this by excluding clone sources that have a range that goes beyond
the current file size in the receiver when iterating extent backreferences.

A test case for fstests follows soon.

Fixes: 11f2069c113e02 ("Btrfs: send, allow clone operations within the same file")
CC: stable@vger.kernel.org # 5.5+
Reviewed-by: Josef Bacik 
Signed-off-by: Filipe Manana 
Signed-off-by: David Sterba 
Signed-off-by: Anand Jain 
Signed-off-by: Greg Kroah-Hartman

Btrfs: send, allow clone operations within the same file

2020-10-14T08:32:59+00:00

commit 11f2069c113e02971b8db6fda62f9b9cd31a030f upstream.

For send we currently skip clone operations when the source and
destination files are the same. This is so because clone didn't support
this case in its early days, but support for it was added back in May
2013 by commit a96fbc72884fcb ("Btrfs: allow file data clone within a
file"). This change adds support for it.

Example:

  $ mkfs.btrfs -f /dev/sdd
  $ mount /dev/sdd /mnt/sdd

  $ xfs_io -f -c "pwrite -S 0xab -b 64K 0 64K" /mnt/sdd/foobar
  $ xfs_io -c "reflink /mnt/sdd/foobar 0 64K 64K" /mnt/sdd/foobar

  $ btrfs subvolume snapshot -r /mnt/sdd /mnt/sdd/snap

  $ mkfs.btrfs -f /dev/sde
  $ mount /dev/sde /mnt/sde

  $ btrfs send /mnt/sdd/snap | btrfs receive /mnt/sde

Without this change file foobar at the destination has a single 128Kb
extent:

  $ filefrag -v /mnt/sde/snap/foobar
  Filesystem type is: 9123683e
  File size of /mnt/sde/snap/foobar is 131072 (32 blocks of 4096 bytes)
   ext:     logical_offset:        physical_offset: length:   expected: flags:
     0:        0..      31:          0..        31:     32:             last,unknown_loc,delalloc,eof
  /mnt/sde/snap/foobar: 1 extent found

With this we get a single 64Kb extent that is shared at file offsets 0
and 64K, just like in the source filesystem:

  $ filefrag -v /mnt/sde/snap/foobar
  Filesystem type is: 9123683e
  File size of /mnt/sde/snap/foobar is 131072 (32 blocks of 4096 bytes)
   ext:     logical_offset:        physical_offset: length:   expected: flags:
     0:        0..      15:       3328..      3343:     16:             shared
     1:       16..      31:       3328..      3343:     16:       3344: last,shared,eof
  /mnt/sde/snap/foobar: 2 extents found

Reviewed-by: Josef Bacik 
Signed-off-by: Filipe Manana 
Reviewed-by: David Sterba 
Signed-off-by: David Sterba 
Signed-off-by: Anand Jain 
Signed-off-by: Greg Kroah-Hartman

io_uring: Fix double list add in io_queue_async_work()

2020-10-14T08:32:57+00:00

If we queue work in io_poll_wake(), it will leads to list double
add. So we should add the list when the callback func is the
io_sq_wq_submit_work.

The following oops was seen:

    list_add double add: new=ffff9ca6a8f1b0e0, prev=ffff9ca62001cee8,
    next=ffff9ca6a8f1b0e0.
    ------------[ cut here ]------------
    kernel BUG at lib/list_debug.c:31!
    Call Trace:
     
     io_poll_wake+0xf3/0x230
     __wake_up_common+0x91/0x170
     __wake_up_common_lock+0x7a/0xc0
     io_commit_cqring+0xea/0x280
     ? blkcg_iolatency_done_bio+0x2b/0x610
     io_cqring_add_event+0x3e/0x60
     io_complete_rw+0x58/0x80
     dio_complete+0x106/0x250
     blk_update_request+0xa0/0x3b0
     blk_mq_end_request+0x1a/0x110
     blk_mq_complete_request+0xd0/0xe0
     nvme_irq+0x129/0x270 [nvme]
     __handle_irq_event_percpu+0x7b/0x190
     handle_irq_event_percpu+0x30/0x80
     handle_irq_event+0x3c/0x60
     handle_edge_irq+0x91/0x1e0
     do_IRQ+0x4d/0xd0
     common_interrupt+0xf/0xf

Fixes: 1c4404efcf2c ("io_uring: make sure async workqueue is canceled on exit")
Reported-by: Jiachen Zhang 
Signed-off-by: Muchun Song 
Signed-off-by: Jens Axboe 
Signed-off-by: Greg Kroah-Hartman

io_uring: Fix remove irrelevant req from the task_list

2020-10-14T08:32:57+00:00

If the process 0 has been initialized io_uring is complete, and
then fork process 1. If process 1 exits and it leads to delete
all reqs from the task_list. If we kill process 0. We will not
send SIGINT signal to the kworker. So we can not remove the req
from the task_list. The io_sq_wq_submit_work() can do that for
us.

Fixes: 1c4404efcf2c ("io_uring: make sure async workqueue is canceled on exit")
Signed-off-by: Muchun Song 
Signed-off-by: Jens Axboe 
Signed-off-by: Greg Kroah-Hartman

io_uring: Fix missing smp_mb() in io_cancel_async_work()

2020-10-14T08:32:57+00:00

The store to req->flags and load req->work_task should not be
reordering in io_cancel_async_work(). We should make sure that
either we store REQ_F_CANCE flag to req->flags or we see the
req->work_task setted in io_sq_wq_submit_work().

Fixes: 1c4404efcf2c ("io_uring: make sure async workqueue is canceled on exit")
Signed-off-by: Muchun Song 
Signed-off-by: Jens Axboe 
Signed-off-by: Greg Kroah-Hartman