<feed xmlns='http://www.w3.org/2005/Atom'>
<title>linux-stable.git/fs, branch v5.3.18</title>
<subtitle>Linux kernel stable tree</subtitle>
<link rel='alternate' type='text/html' href='https://git.tavy.me/linux-stable.git/'/>
<entry>
<title>ext4: fix a bug in ext4_wait_for_tail_page_commit</title>
<updated>2019-12-17T19:08:36+00:00</updated>
<author>
<name>yangerkun</name>
<email>yangerkun@huawei.com</email>
</author>
<published>2019-09-19T06:35:08+00:00</published>
<link rel='alternate' type='text/html' href='https://git.tavy.me/linux-stable.git/commit/?id=e880a8445950c53e52891fef0df2ece918a2fba8'/>
<id>e880a8445950c53e52891fef0df2ece918a2fba8</id>
<content type='text'>
commit 565333a1554d704789e74205989305c811fd9c7a upstream.

No need to wait for any commit once the page is fully truncated.
Besides, it may confuse e.g. concurrent ext4_writepage() with the page
still be dirty (will be cleared by truncate_pagecache() in
ext4_setattr()) but buffers has been freed; and then trigger a bug
show as below:

[   26.057508] ------------[ cut here ]------------
[   26.058531] kernel BUG at fs/ext4/inode.c:2134!
...
[   26.088130] Call trace:
[   26.088695]  ext4_writepage+0x914/0xb28
[   26.089541]  writeout.isra.4+0x1b4/0x2b8
[   26.090409]  move_to_new_page+0x3b0/0x568
[   26.091338]  __unmap_and_move+0x648/0x988
[   26.092241]  unmap_and_move+0x48c/0xbb8
[   26.093096]  migrate_pages+0x220/0xb28
[   26.093945]  kernel_mbind+0x828/0xa18
[   26.094791]  __arm64_sys_mbind+0xc8/0x138
[   26.095716]  el0_svc_common+0x190/0x490
[   26.096571]  el0_svc_handler+0x60/0xd0
[   26.097423]  el0_svc+0x8/0xc

Run the procedure (generate by syzkaller) parallel with ext3.

void main()
{
	int fd, fd1, ret;
	void *addr;
	size_t length = 4096;
	int flags;
	off_t offset = 0;
	char *str = "12345";

	fd = open("a", O_RDWR | O_CREAT);
	assert(fd &gt;= 0);

	/* Truncate to 4k */
	ret = ftruncate(fd, length);
	assert(ret == 0);

	/* Journal data mode */
	flags = 0xc00f;
	ret = ioctl(fd, _IOW('f', 2, long), &amp;flags);
	assert(ret == 0);

	/* Truncate to 0 */
	fd1 = open("a", O_TRUNC | O_NOATIME);
	assert(fd1 &gt;= 0);

	addr = mmap(NULL, length, PROT_WRITE | PROT_READ,
					MAP_SHARED, fd, offset);
	assert(addr != (void *)-1);

	memcpy(addr, str, 5);
	mbind(addr, length, 0, 0, 0, MPOL_MF_MOVE);
}

And the bug will be triggered once we seen the below order.

reproduce1                         reproduce2

...                            |   ...
truncate to 4k                 |
change to journal data mode    |
                               |   memcpy(set page dirty)
truncate to 0:                 |
ext4_setattr:                  |
...                            |
ext4_wait_for_tail_page_commit |
                               |   mbind(trigger bug)
truncate_pagecache(clean dirty)|   ...
...                            |

mbind will call ext4_writepage() since the page still be dirty, and then
report the bug since the buffers has been free. Fix it by return
directly once offset equals to 0 which means the page has been fully
truncated.

Reported-by: Hulk Robot &lt;hulkci@huawei.com&gt;
Signed-off-by: yangerkun &lt;yangerkun@huawei.com&gt;
Link: https://lore.kernel.org/r/20190919063508.1045-1-yangerkun@huawei.com
Reviewed-by: Jan Kara &lt;jack@suse.cz&gt;
Signed-off-by: Theodore Ts'o &lt;tytso@mit.edu&gt;
Signed-off-by: Greg Kroah-Hartman &lt;gregkh@linuxfoundation.org&gt;

</content>
<content type='xhtml'>
<div xmlns='http://www.w3.org/1999/xhtml'>
<pre>
commit 565333a1554d704789e74205989305c811fd9c7a upstream.

No need to wait for any commit once the page is fully truncated.
Besides, it may confuse e.g. concurrent ext4_writepage() with the page
still be dirty (will be cleared by truncate_pagecache() in
ext4_setattr()) but buffers has been freed; and then trigger a bug
show as below:

[   26.057508] ------------[ cut here ]------------
[   26.058531] kernel BUG at fs/ext4/inode.c:2134!
...
[   26.088130] Call trace:
[   26.088695]  ext4_writepage+0x914/0xb28
[   26.089541]  writeout.isra.4+0x1b4/0x2b8
[   26.090409]  move_to_new_page+0x3b0/0x568
[   26.091338]  __unmap_and_move+0x648/0x988
[   26.092241]  unmap_and_move+0x48c/0xbb8
[   26.093096]  migrate_pages+0x220/0xb28
[   26.093945]  kernel_mbind+0x828/0xa18
[   26.094791]  __arm64_sys_mbind+0xc8/0x138
[   26.095716]  el0_svc_common+0x190/0x490
[   26.096571]  el0_svc_handler+0x60/0xd0
[   26.097423]  el0_svc+0x8/0xc

Run the procedure (generate by syzkaller) parallel with ext3.

void main()
{
	int fd, fd1, ret;
	void *addr;
	size_t length = 4096;
	int flags;
	off_t offset = 0;
	char *str = "12345";

	fd = open("a", O_RDWR | O_CREAT);
	assert(fd &gt;= 0);

	/* Truncate to 4k */
	ret = ftruncate(fd, length);
	assert(ret == 0);

	/* Journal data mode */
	flags = 0xc00f;
	ret = ioctl(fd, _IOW('f', 2, long), &amp;flags);
	assert(ret == 0);

	/* Truncate to 0 */
	fd1 = open("a", O_TRUNC | O_NOATIME);
	assert(fd1 &gt;= 0);

	addr = mmap(NULL, length, PROT_WRITE | PROT_READ,
					MAP_SHARED, fd, offset);
	assert(addr != (void *)-1);

	memcpy(addr, str, 5);
	mbind(addr, length, 0, 0, 0, MPOL_MF_MOVE);
}

And the bug will be triggered once we seen the below order.

reproduce1                         reproduce2

...                            |   ...
truncate to 4k                 |
change to journal data mode    |
                               |   memcpy(set page dirty)
truncate to 0:                 |
ext4_setattr:                  |
...                            |
ext4_wait_for_tail_page_commit |
                               |   mbind(trigger bug)
truncate_pagecache(clean dirty)|   ...
...                            |

mbind will call ext4_writepage() since the page still be dirty, and then
report the bug since the buffers has been free. Fix it by return
directly once offset equals to 0 which means the page has been fully
truncated.

Reported-by: Hulk Robot &lt;hulkci@huawei.com&gt;
Signed-off-by: yangerkun &lt;yangerkun@huawei.com&gt;
Link: https://lore.kernel.org/r/20190919063508.1045-1-yangerkun@huawei.com
Reviewed-by: Jan Kara &lt;jack@suse.cz&gt;
Signed-off-by: Theodore Ts'o &lt;tytso@mit.edu&gt;
Signed-off-by: Greg Kroah-Hartman &lt;gregkh@linuxfoundation.org&gt;

</pre>
</div>
</content>
</entry>
<entry>
<title>splice: only read in as much information as there is pipe buffer space</title>
<updated>2019-12-17T19:08:35+00:00</updated>
<author>
<name>Darrick J. Wong</name>
<email>darrick.wong@oracle.com</email>
</author>
<published>2019-10-15T15:44:32+00:00</published>
<link rel='alternate' type='text/html' href='https://git.tavy.me/linux-stable.git/commit/?id=acdd98046288d9113aad152dc8d1341dd602afc7'/>
<id>acdd98046288d9113aad152dc8d1341dd602afc7</id>
<content type='text'>
commit 3253d9d093376d62b4a56e609f15d2ec5085ac73 upstream.

Andreas Grünbacher reports that on the two filesystems that support
iomap directio, it's possible for splice() to return -EAGAIN (instead of
a short splice) if the pipe being written to has less space available in
its pipe buffers than the length supplied by the calling process.

Months ago we fixed splice_direct_to_actor to clamp the length of the
read request to the size of the splice pipe.  Do the same to do_splice.

Fixes: 17614445576b6 ("splice: don't read more than available pipe space")
Reported-by: syzbot+3c01db6025f26530cf8d@syzkaller.appspotmail.com
Reported-by: Andreas Grünbacher &lt;andreas.gruenbacher@gmail.com&gt;
Reviewed-by: Andreas Grünbacher &lt;andreas.gruenbacher@gmail.com&gt;
Signed-off-by: Darrick J. Wong &lt;darrick.wong@oracle.com&gt;
Signed-off-by: Greg Kroah-Hartman &lt;gregkh@linuxfoundation.org&gt;

</content>
<content type='xhtml'>
<div xmlns='http://www.w3.org/1999/xhtml'>
<pre>
commit 3253d9d093376d62b4a56e609f15d2ec5085ac73 upstream.

Andreas Grünbacher reports that on the two filesystems that support
iomap directio, it's possible for splice() to return -EAGAIN (instead of
a short splice) if the pipe being written to has less space available in
its pipe buffers than the length supplied by the calling process.

Months ago we fixed splice_direct_to_actor to clamp the length of the
read request to the size of the splice pipe.  Do the same to do_splice.

Fixes: 17614445576b6 ("splice: don't read more than available pipe space")
Reported-by: syzbot+3c01db6025f26530cf8d@syzkaller.appspotmail.com
Reported-by: Andreas Grünbacher &lt;andreas.gruenbacher@gmail.com&gt;
Reviewed-by: Andreas Grünbacher &lt;andreas.gruenbacher@gmail.com&gt;
Signed-off-by: Darrick J. Wong &lt;darrick.wong@oracle.com&gt;
Signed-off-by: Greg Kroah-Hartman &lt;gregkh@linuxfoundation.org&gt;

</pre>
</div>
</content>
</entry>
<entry>
<title>ext4: work around deleting a file with i_nlink == 0 safely</title>
<updated>2019-12-17T19:08:33+00:00</updated>
<author>
<name>Theodore Ts'o</name>
<email>tytso@mit.edu</email>
</author>
<published>2019-11-12T03:18:13+00:00</published>
<link rel='alternate' type='text/html' href='https://git.tavy.me/linux-stable.git/commit/?id=ea46b9e9aa340496aec70ff401b4e922df54f244'/>
<id>ea46b9e9aa340496aec70ff401b4e922df54f244</id>
<content type='text'>
commit c7df4a1ecb8579838ec8c56b2bb6a6716e974f37 upstream.

If the file system is corrupted such that a file's i_links_count is
too small, then it's possible that when unlinking that file, i_nlink
will already be zero.  Previously we were working around this kind of
corruption by forcing i_nlink to one; but we were doing this before
trying to delete the directory entry --- and if the file system is
corrupted enough that ext4_delete_entry() fails, then we exit with
i_nlink elevated, and this causes the orphan inode list handling to be
FUBAR'ed, such that when we unmount the file system, the orphan inode
list can get corrupted.

A better way to fix this is to simply skip trying to call drop_nlink()
if i_nlink is already zero, thus moving the check to the place where
it makes the most sense.

https://bugzilla.kernel.org/show_bug.cgi?id=205433

Link: https://lore.kernel.org/r/20191112032903.8828-1-tytso@mit.edu
Signed-off-by: Theodore Ts'o &lt;tytso@mit.edu&gt;
Cc: stable@kernel.org
Reviewed-by: Andreas Dilger &lt;adilger@dilger.ca&gt;
Signed-off-by: Greg Kroah-Hartman &lt;gregkh@linuxfoundation.org&gt;

</content>
<content type='xhtml'>
<div xmlns='http://www.w3.org/1999/xhtml'>
<pre>
commit c7df4a1ecb8579838ec8c56b2bb6a6716e974f37 upstream.

If the file system is corrupted such that a file's i_links_count is
too small, then it's possible that when unlinking that file, i_nlink
will already be zero.  Previously we were working around this kind of
corruption by forcing i_nlink to one; but we were doing this before
trying to delete the directory entry --- and if the file system is
corrupted enough that ext4_delete_entry() fails, then we exit with
i_nlink elevated, and this causes the orphan inode list handling to be
FUBAR'ed, such that when we unmount the file system, the orphan inode
list can get corrupted.

A better way to fix this is to simply skip trying to call drop_nlink()
if i_nlink is already zero, thus moving the check to the place where
it makes the most sense.

https://bugzilla.kernel.org/show_bug.cgi?id=205433

Link: https://lore.kernel.org/r/20191112032903.8828-1-tytso@mit.edu
Signed-off-by: Theodore Ts'o &lt;tytso@mit.edu&gt;
Cc: stable@kernel.org
Reviewed-by: Andreas Dilger &lt;adilger@dilger.ca&gt;
Signed-off-by: Greg Kroah-Hartman &lt;gregkh@linuxfoundation.org&gt;

</pre>
</div>
</content>
</entry>
<entry>
<title>reiserfs: fix extended attributes on the root directory</title>
<updated>2019-12-17T19:08:18+00:00</updated>
<author>
<name>Jeff Mahoney</name>
<email>jeffm@suse.com</email>
</author>
<published>2019-10-24T14:31:27+00:00</published>
<link rel='alternate' type='text/html' href='https://git.tavy.me/linux-stable.git/commit/?id=3f162625c49739c2f3c5e26e64d59f487c47b492'/>
<id>3f162625c49739c2f3c5e26e64d59f487c47b492</id>
<content type='text'>
commit 60e4cf67a582d64f07713eda5fcc8ccdaf7833e6 upstream.

Since commit d0a5b995a308 (vfs: Add IOP_XATTR inode operations flag)
extended attributes haven't worked on the root directory in reiserfs.

This is due to reiserfs conditionally setting the sb-&gt;s_xattrs handler
array depending on whether it located or create the internal privroot
directory.  It necessarily does this after the root inode is already
read in.  The IOP_XATTR flag is set during inode initialization, so
it never gets set on the root directory.

This commit unconditionally assigns sb-&gt;s_xattrs and clears IOP_XATTR on
internal inodes.  The old return values due to the conditional assignment
are handled via open_xa_root, which now returns EOPNOTSUPP as the VFS
would have done.

Link: https://lore.kernel.org/r/20191024143127.17509-1-jeffm@suse.com
CC: stable@vger.kernel.org
Fixes: d0a5b995a308 ("vfs: Add IOP_XATTR inode operations flag")
Signed-off-by: Jeff Mahoney &lt;jeffm@suse.com&gt;
Signed-off-by: Jan Kara &lt;jack@suse.cz&gt;
Signed-off-by: Greg Kroah-Hartman &lt;gregkh@linuxfoundation.org&gt;

</content>
<content type='xhtml'>
<div xmlns='http://www.w3.org/1999/xhtml'>
<pre>
commit 60e4cf67a582d64f07713eda5fcc8ccdaf7833e6 upstream.

Since commit d0a5b995a308 (vfs: Add IOP_XATTR inode operations flag)
extended attributes haven't worked on the root directory in reiserfs.

This is due to reiserfs conditionally setting the sb-&gt;s_xattrs handler
array depending on whether it located or create the internal privroot
directory.  It necessarily does this after the root inode is already
read in.  The IOP_XATTR flag is set during inode initialization, so
it never gets set on the root directory.

This commit unconditionally assigns sb-&gt;s_xattrs and clears IOP_XATTR on
internal inodes.  The old return values due to the conditional assignment
are handled via open_xa_root, which now returns EOPNOTSUPP as the VFS
would have done.

Link: https://lore.kernel.org/r/20191024143127.17509-1-jeffm@suse.com
CC: stable@vger.kernel.org
Fixes: d0a5b995a308 ("vfs: Add IOP_XATTR inode operations flag")
Signed-off-by: Jeff Mahoney &lt;jeffm@suse.com&gt;
Signed-off-by: Jan Kara &lt;jack@suse.cz&gt;
Signed-off-by: Greg Kroah-Hartman &lt;gregkh@linuxfoundation.org&gt;

</pre>
</div>
</content>
</entry>
<entry>
<title>ext4: Fix credit estimate for final inode freeing</title>
<updated>2019-12-17T19:08:17+00:00</updated>
<author>
<name>Jan Kara</name>
<email>jack@suse.cz</email>
</author>
<published>2019-11-05T16:44:12+00:00</published>
<link rel='alternate' type='text/html' href='https://git.tavy.me/linux-stable.git/commit/?id=4ea8b55f7b4a40c92afbd025dfc4332768d869fa'/>
<id>4ea8b55f7b4a40c92afbd025dfc4332768d869fa</id>
<content type='text'>
commit 65db869c754e7c271691dd5feabf884347e694f5 upstream.

Estimate for the number of credits needed for final freeing of inode in
ext4_evict_inode() was to small. We may modify 4 blocks (inode &amp; sb for
orphan deletion, bitmap &amp; group descriptor for inode freeing) and not
just 3.

[ Fixed minor whitespace nit. -- TYT ]

Fixes: e50e5129f384 ("ext4: xattr-in-inode support")
CC: stable@vger.kernel.org
Signed-off-by: Jan Kara &lt;jack@suse.cz&gt;
Link: https://lore.kernel.org/r/20191105164437.32602-6-jack@suse.cz
Signed-off-by: Theodore Ts'o &lt;tytso@mit.edu&gt;
Signed-off-by: Greg Kroah-Hartman &lt;gregkh@linuxfoundation.org&gt;

</content>
<content type='xhtml'>
<div xmlns='http://www.w3.org/1999/xhtml'>
<pre>
commit 65db869c754e7c271691dd5feabf884347e694f5 upstream.

Estimate for the number of credits needed for final freeing of inode in
ext4_evict_inode() was to small. We may modify 4 blocks (inode &amp; sb for
orphan deletion, bitmap &amp; group descriptor for inode freeing) and not
just 3.

[ Fixed minor whitespace nit. -- TYT ]

Fixes: e50e5129f384 ("ext4: xattr-in-inode support")
CC: stable@vger.kernel.org
Signed-off-by: Jan Kara &lt;jack@suse.cz&gt;
Link: https://lore.kernel.org/r/20191105164437.32602-6-jack@suse.cz
Signed-off-by: Theodore Ts'o &lt;tytso@mit.edu&gt;
Signed-off-by: Greg Kroah-Hartman &lt;gregkh@linuxfoundation.org&gt;

</pre>
</div>
</content>
</entry>
<entry>
<title>quota: fix livelock in dquot_writeback_dquots</title>
<updated>2019-12-17T19:08:17+00:00</updated>
<author>
<name>Dmitry Monakhov</name>
<email>dmtrmonakhov@yandex-team.ru</email>
</author>
<published>2019-10-31T10:39:19+00:00</published>
<link rel='alternate' type='text/html' href='https://git.tavy.me/linux-stable.git/commit/?id=0739013bf4decc714eb2d8424068c8b60f012f08'/>
<id>0739013bf4decc714eb2d8424068c8b60f012f08</id>
<content type='text'>
commit 6ff33d99fc5c96797103b48b7b0902c296f09c05 upstream.

Write only quotas which are dirty at entry.

XFSTEST: https://github.com/dmonakhov/xfstests/commit/b10ad23566a5bf75832a6f500e1236084083cddc

Link: https://lore.kernel.org/r/20191031103920.3919-1-dmonakhov@openvz.org
CC: stable@vger.kernel.org
Signed-off-by: Konstantin Khlebnikov &lt;khlebnikov@yandex-team.ru&gt;
Signed-off-by: Dmitry Monakhov &lt;dmtrmonakhov@yandex-team.ru&gt;
Signed-off-by: Jan Kara &lt;jack@suse.cz&gt;
Signed-off-by: Greg Kroah-Hartman &lt;gregkh@linuxfoundation.org&gt;

</content>
<content type='xhtml'>
<div xmlns='http://www.w3.org/1999/xhtml'>
<pre>
commit 6ff33d99fc5c96797103b48b7b0902c296f09c05 upstream.

Write only quotas which are dirty at entry.

XFSTEST: https://github.com/dmonakhov/xfstests/commit/b10ad23566a5bf75832a6f500e1236084083cddc

Link: https://lore.kernel.org/r/20191031103920.3919-1-dmonakhov@openvz.org
CC: stable@vger.kernel.org
Signed-off-by: Konstantin Khlebnikov &lt;khlebnikov@yandex-team.ru&gt;
Signed-off-by: Dmitry Monakhov &lt;dmtrmonakhov@yandex-team.ru&gt;
Signed-off-by: Jan Kara &lt;jack@suse.cz&gt;
Signed-off-by: Greg Kroah-Hartman &lt;gregkh@linuxfoundation.org&gt;

</pre>
</div>
</content>
</entry>
<entry>
<title>ext2: check err when partial != NULL</title>
<updated>2019-12-17T19:08:15+00:00</updated>
<author>
<name>Chengguang Xu</name>
<email>cgxu519@mykernel.net</email>
</author>
<published>2019-11-05T04:51:00+00:00</published>
<link rel='alternate' type='text/html' href='https://git.tavy.me/linux-stable.git/commit/?id=e1a9edb33fc50c6304f58c57494ea347d1253f1b'/>
<id>e1a9edb33fc50c6304f58c57494ea347d1253f1b</id>
<content type='text'>
commit e705f4b8aa27a59f8933e8f384e9752f052c469c upstream.

Check err when partial == NULL is meaningless because
partial == NULL means getting branch successfully without
error.

CC: stable@vger.kernel.org
Link: https://lore.kernel.org/r/20191105045100.7104-1-cgxu519@mykernel.net
Signed-off-by: Chengguang Xu &lt;cgxu519@mykernel.net&gt;
Signed-off-by: Jan Kara &lt;jack@suse.cz&gt;
Signed-off-by: Greg Kroah-Hartman &lt;gregkh@linuxfoundation.org&gt;

</content>
<content type='xhtml'>
<div xmlns='http://www.w3.org/1999/xhtml'>
<pre>
commit e705f4b8aa27a59f8933e8f384e9752f052c469c upstream.

Check err when partial == NULL is meaningless because
partial == NULL means getting branch successfully without
error.

CC: stable@vger.kernel.org
Link: https://lore.kernel.org/r/20191105045100.7104-1-cgxu519@mykernel.net
Signed-off-by: Chengguang Xu &lt;cgxu519@mykernel.net&gt;
Signed-off-by: Jan Kara &lt;jack@suse.cz&gt;
Signed-off-by: Greg Kroah-Hartman &lt;gregkh@linuxfoundation.org&gt;

</pre>
</div>
</content>
</entry>
<entry>
<title>quota: Check that quota is not dirty before release</title>
<updated>2019-12-17T19:08:15+00:00</updated>
<author>
<name>Dmitry Monakhov</name>
<email>dmtrmonakhov@yandex-team.ru</email>
</author>
<published>2019-10-31T10:39:20+00:00</published>
<link rel='alternate' type='text/html' href='https://git.tavy.me/linux-stable.git/commit/?id=39cc95ae4ffa354d1268ede4ee62761a6663e16d'/>
<id>39cc95ae4ffa354d1268ede4ee62761a6663e16d</id>
<content type='text'>
commit df4bb5d128e2c44848aeb36b7ceceba3ac85080d upstream.

There is a race window where quota was redirted once we drop dq_list_lock inside dqput(),
but before we grab dquot-&gt;dq_lock inside dquot_release()

TASK1                                                       TASK2 (chowner)
-&gt;dqput()
  we_slept:
    spin_lock(&amp;dq_list_lock)
    if (dquot_dirty(dquot)) {
          spin_unlock(&amp;dq_list_lock);
          dquot-&gt;dq_sb-&gt;dq_op-&gt;write_dquot(dquot);
          goto we_slept
    if (test_bit(DQ_ACTIVE_B, &amp;dquot-&gt;dq_flags)) {
          spin_unlock(&amp;dq_list_lock);
          dquot-&gt;dq_sb-&gt;dq_op-&gt;release_dquot(dquot);
                                                            dqget()
							    mark_dquot_dirty()
							    dqput()
          goto we_slept;
        }
So dquot dirty quota will be released by TASK1, but on next we_sleept loop
we detect this and call -&gt;write_dquot() for it.
XFSTEST: https://github.com/dmonakhov/xfstests/commit/440a80d4cbb39e9234df4d7240aee1d551c36107

Link: https://lore.kernel.org/r/20191031103920.3919-2-dmonakhov@openvz.org
CC: stable@vger.kernel.org
Signed-off-by: Dmitry Monakhov &lt;dmtrmonakhov@yandex-team.ru&gt;
Signed-off-by: Jan Kara &lt;jack@suse.cz&gt;
Signed-off-by: Greg Kroah-Hartman &lt;gregkh@linuxfoundation.org&gt;

</content>
<content type='xhtml'>
<div xmlns='http://www.w3.org/1999/xhtml'>
<pre>
commit df4bb5d128e2c44848aeb36b7ceceba3ac85080d upstream.

There is a race window where quota was redirted once we drop dq_list_lock inside dqput(),
but before we grab dquot-&gt;dq_lock inside dquot_release()

TASK1                                                       TASK2 (chowner)
-&gt;dqput()
  we_slept:
    spin_lock(&amp;dq_list_lock)
    if (dquot_dirty(dquot)) {
          spin_unlock(&amp;dq_list_lock);
          dquot-&gt;dq_sb-&gt;dq_op-&gt;write_dquot(dquot);
          goto we_slept
    if (test_bit(DQ_ACTIVE_B, &amp;dquot-&gt;dq_flags)) {
          spin_unlock(&amp;dq_list_lock);
          dquot-&gt;dq_sb-&gt;dq_op-&gt;release_dquot(dquot);
                                                            dqget()
							    mark_dquot_dirty()
							    dqput()
          goto we_slept;
        }
So dquot dirty quota will be released by TASK1, but on next we_sleept loop
we detect this and call -&gt;write_dquot() for it.
XFSTEST: https://github.com/dmonakhov/xfstests/commit/440a80d4cbb39e9234df4d7240aee1d551c36107

Link: https://lore.kernel.org/r/20191031103920.3919-2-dmonakhov@openvz.org
CC: stable@vger.kernel.org
Signed-off-by: Dmitry Monakhov &lt;dmtrmonakhov@yandex-team.ru&gt;
Signed-off-by: Jan Kara &lt;jack@suse.cz&gt;
Signed-off-by: Greg Kroah-Hartman &lt;gregkh@linuxfoundation.org&gt;

</pre>
</div>
</content>
</entry>
<entry>
<title>ovl: relax WARN_ON() on rename to self</title>
<updated>2019-12-17T19:07:41+00:00</updated>
<author>
<name>Amir Goldstein</name>
<email>amir73il@gmail.com</email>
</author>
<published>2019-12-06T06:33:36+00:00</published>
<link rel='alternate' type='text/html' href='https://git.tavy.me/linux-stable.git/commit/?id=e216ed638b04f044bfaa9a791001f2d295e533e0'/>
<id>e216ed638b04f044bfaa9a791001f2d295e533e0</id>
<content type='text'>
commit 6889ee5a53b8d969aa542047f5ac8acdc0e79a91 upstream.

In ovl_rename(), if new upper is hardlinked to old upper underneath
overlayfs before upper dirs are locked, user will get an ESTALE error
and a WARN_ON will be printed.

Changes to underlying layers while overlayfs is mounted may result in
unexpected behavior, but it shouldn't crash the kernel and it shouldn't
trigger WARN_ON() either, so relax this WARN_ON().

Reported-by: syzbot+bb1836a212e69f8e201a@syzkaller.appspotmail.com
Fixes: 804032fabb3b ("ovl: don't check rename to self")
Cc: &lt;stable@vger.kernel.org&gt; # v4.9+
Signed-off-by: Amir Goldstein &lt;amir73il@gmail.com&gt;
Signed-off-by: Miklos Szeredi &lt;mszeredi@redhat.com&gt;
Signed-off-by: Greg Kroah-Hartman &lt;gregkh@linuxfoundation.org&gt;

</content>
<content type='xhtml'>
<div xmlns='http://www.w3.org/1999/xhtml'>
<pre>
commit 6889ee5a53b8d969aa542047f5ac8acdc0e79a91 upstream.

In ovl_rename(), if new upper is hardlinked to old upper underneath
overlayfs before upper dirs are locked, user will get an ESTALE error
and a WARN_ON will be printed.

Changes to underlying layers while overlayfs is mounted may result in
unexpected behavior, but it shouldn't crash the kernel and it shouldn't
trigger WARN_ON() either, so relax this WARN_ON().

Reported-by: syzbot+bb1836a212e69f8e201a@syzkaller.appspotmail.com
Fixes: 804032fabb3b ("ovl: don't check rename to self")
Cc: &lt;stable@vger.kernel.org&gt; # v4.9+
Signed-off-by: Amir Goldstein &lt;amir73il@gmail.com&gt;
Signed-off-by: Miklos Szeredi &lt;mszeredi@redhat.com&gt;
Signed-off-by: Greg Kroah-Hartman &lt;gregkh@linuxfoundation.org&gt;

</pre>
</div>
</content>
</entry>
<entry>
<title>ovl: fix corner case of non-unique st_dev;st_ino</title>
<updated>2019-12-17T19:07:40+00:00</updated>
<author>
<name>Amir Goldstein</name>
<email>amir73il@gmail.com</email>
</author>
<published>2019-11-17T15:43:44+00:00</published>
<link rel='alternate' type='text/html' href='https://git.tavy.me/linux-stable.git/commit/?id=801a491252c419f262765efed108df8db36d04e2'/>
<id>801a491252c419f262765efed108df8db36d04e2</id>
<content type='text'>
commit 9c6d8f13e9da10a26ad7f0a020ef86e8ef142835 upstream.

On non-samefs overlay without xino, non pure upper inodes should use a
pseudo_dev assigned to each unique lower fs and pure upper inodes use the
real upper st_dev.

It is fine for an overlay pure upper inode to use the same st_dev;st_ino
values as the real upper inode, because the content of those two different
filesystem objects is always the same.

In this case, however:
 - two filesystems, A and B
 - upper layer is on A
 - lower layer 1 is also on A
 - lower layer 2 is on B

Non pure upper overlay inode, whose origin is in layer 1 will have the same
st_dev;st_ino values as the real lower inode. This may result with a false
positive results of 'diff' between the real lower and copied up overlay
inode.

Fix this by using the upper st_dev;st_ino values in this case.  This breaks
the property of constant st_dev;st_ino across copy up of this case. This
breakage will be fixed by a later patch.

Fixes: 5148626b806a ("ovl: allocate anon bdev per unique lower fs")
Cc: stable@vger.kernel.org # v4.17+
Signed-off-by: Amir Goldstein &lt;amir73il@gmail.com&gt;
Signed-off-by: Miklos Szeredi &lt;mszeredi@redhat.com&gt;
Signed-off-by: Greg Kroah-Hartman &lt;gregkh@linuxfoundation.org&gt;

</content>
<content type='xhtml'>
<div xmlns='http://www.w3.org/1999/xhtml'>
<pre>
commit 9c6d8f13e9da10a26ad7f0a020ef86e8ef142835 upstream.

On non-samefs overlay without xino, non pure upper inodes should use a
pseudo_dev assigned to each unique lower fs and pure upper inodes use the
real upper st_dev.

It is fine for an overlay pure upper inode to use the same st_dev;st_ino
values as the real upper inode, because the content of those two different
filesystem objects is always the same.

In this case, however:
 - two filesystems, A and B
 - upper layer is on A
 - lower layer 1 is also on A
 - lower layer 2 is on B

Non pure upper overlay inode, whose origin is in layer 1 will have the same
st_dev;st_ino values as the real lower inode. This may result with a false
positive results of 'diff' between the real lower and copied up overlay
inode.

Fix this by using the upper st_dev;st_ino values in this case.  This breaks
the property of constant st_dev;st_ino across copy up of this case. This
breakage will be fixed by a later patch.

Fixes: 5148626b806a ("ovl: allocate anon bdev per unique lower fs")
Cc: stable@vger.kernel.org # v4.17+
Signed-off-by: Amir Goldstein &lt;amir73il@gmail.com&gt;
Signed-off-by: Miklos Szeredi &lt;mszeredi@redhat.com&gt;
Signed-off-by: Greg Kroah-Hartman &lt;gregkh@linuxfoundation.org&gt;

</pre>
</div>
</content>
</entry>
</feed>
