linux-stable.git/fs, branch v5.12.2

ovl: allow upperdir inside lowerdir

2021-05-07T10:53:25+00:00

commit 708fa01597fa002599756bf56a96d0de1677375c upstream.

Commit 146d62e5a586 ("ovl: detect overlapping layers") made sure we don't
have overlapping layers, but it also broke the arguably valid use case of

 mount -olowerdir=/,upperdir=/subdir,..

where upperdir overlaps lowerdir on the same filesystem.  This has been
causing regressions.

Revert the check, but only for the specific case where upperdir and/or
workdir are subdirectories of lowerdir.  Any other overlap (e.g. lowerdir
is subdirectory of upperdir, etc) case is crazy, so leave the check in
place for those.

Overlaps are detected at lookup time too, so reverting the mount time check
should be safe.

Fixes: 146d62e5a586 ("ovl: detect overlapping layers")
Cc:  # v5.2
Signed-off-by: Miklos Szeredi 
Signed-off-by: Greg Kroah-Hartman

ovl: fix leaked dentry

2021-05-07T10:53:25+00:00

commit eaab1d45cdb4bb0c846bd23c3d666d5b90af7b41 upstream.

Since commit 6815f479ca90 ("ovl: use only uppermetacopy state in
ovl_lookup()"), overlayfs doesn't put temporary dentry when there is a
metacopy error, which leads to dentry leaks when shutting down the related
superblock:

  overlayfs: refusing to follow metacopy origin for (/file0)
  ...
  BUG: Dentry (____ptrval____){i=3f33,n=file3}  still in use (1) [unmount of overlay overlay]
  ...
  WARNING: CPU: 1 PID: 432 at umount_check.cold+0x107/0x14d
  CPU: 1 PID: 432 Comm: unmount-overlay Not tainted 5.12.0-rc5 #1
  ...
  RIP: 0010:umount_check.cold+0x107/0x14d
  ...
  Call Trace:
   d_walk+0x28c/0x950
   ? dentry_lru_isolate+0x2b0/0x2b0
   ? __kasan_slab_free+0x12/0x20
   do_one_tree+0x33/0x60
   shrink_dcache_for_umount+0x78/0x1d0
   generic_shutdown_super+0x70/0x440
   kill_anon_super+0x3e/0x70
   deactivate_locked_super+0xc4/0x160
   deactivate_super+0xfa/0x140
   cleanup_mnt+0x22e/0x370
   __cleanup_mnt+0x1a/0x30
   task_work_run+0x139/0x210
   do_exit+0xb0c/0x2820
   ? __kasan_check_read+0x1d/0x30
   ? find_held_lock+0x35/0x160
   ? lock_release+0x1b6/0x660
   ? mm_update_next_owner+0xa20/0xa20
   ? reacquire_held_locks+0x3f0/0x3f0
   ? __sanitizer_cov_trace_const_cmp4+0x22/0x30
   do_group_exit+0x135/0x380
   __do_sys_exit_group.isra.0+0x20/0x20
   __x64_sys_exit_group+0x3c/0x50
   do_syscall_64+0x45/0x70
   entry_SYSCALL_64_after_hwframe+0x44/0xae
  ...
  VFS: Busy inodes after unmount of overlay. Self-destruct in 5 seconds.  Have a nice day...

This fix has been tested with a syzkaller reproducer.

Cc: Amir Goldstein 
Cc:  # v5.8+
Reported-by: syzbot 
Fixes: 6815f479ca90 ("ovl: use only uppermetacopy state in ovl_lookup()")
Signed-off-by: Mickaël Salaün 
Link: https://lore.kernel.org/r/20210329164907.2133175-1-mic@digikod.net
Reviewed-by: Vivek Goyal 
Signed-off-by: Miklos Szeredi 
Signed-off-by: Greg Kroah-Hartman

ovl: fix reference counting in ovl_mmap error path

2021-04-23T21:42:39+00:00

mmap_region() now calls fput() on the vma->vm_file.

Fix this by using vma_set_file() so it doesn't need to be handled
manually here any more.

Link: https://lkml.kernel.org/r/20210421132012.82354-2-christian.koenig@amd.com
Fixes: 1527f926fd04 ("mm: mmap: fix fput in error path v2")
Signed-off-by: Christian König 
Reviewed-by: Daniel Vetter 
Cc: Jan Harkes 
Cc: Miklos Szeredi 
Cc: Jason Gunthorpe 
Cc: 	[5.11+]
Signed-off-by: Andrew Morton 
Signed-off-by: Linus Torvalds

coda: fix reference counting in coda_file_mmap error path

2021-04-23T21:42:39+00:00

mmap_region() now calls fput() on the vma->vm_file.

So we need to drop the extra reference on the coda file instead of the
host file.

Link: https://lkml.kernel.org/r/20210421132012.82354-1-christian.koenig@amd.com
Fixes: 1527f926fd04 ("mm: mmap: fix fput in error path v2")
Signed-off-by: Christian König 
Reviewed-by: Daniel Vetter 
Acked-by: Jan Harkes 
Cc: Miklos Szeredi 
Cc: Jason Gunthorpe 
Cc: 	[5.11+]
Signed-off-by: Andrew Morton 
Signed-off-by: Linus Torvalds

readdir: make sure to verify directory entry for legacy interfaces too

2021-04-17T18:39:49+00:00

This does the directory entry name verification for the legacy
"fillonedir" (and compat) interface that goes all the way back to the
dark ages before we had a proper dirent, and the readdir() system call
returned just a single entry at a time.

Nobody should use this interface unless you still have binaries from
1991, but let's do it right.

This came up during discussions about unsafe_copy_to_user() and proper
checking of all the inputs to it, as the networking layer is looking to
use it in a few new places. So let's make sure the _old_ users do it
all right and proper, before we add new ones.

See also commit 8a23eb804ca4 ("Make filldir[64]() verify the directory
entry filename is valid") which did the proper modern interfaces that
people actually use. It had a note:

Note that I didn't bother adding the checks to any legacy interfaces
that nobody uses.

which this now corrects. Note that we really don't care about POSIX and
the presense of '/' in a directory entry, but verify_dirent_name() also
ends up doing the proper name length verification which is what the
input checking discussion was about.

[ Another option would be to remove the support for this particular very
old interface: any binaries that use it are likely a.out binaries, and
they will no longer run anyway since we removed a.out binftm support
in commit eac616557050 ("x86: Deprecate a.out support").

But I'm not sure which came first: getdents() or ELF support, so let's
pretend somebody might still have a working binary that uses the
legacy readdir() case.. ]

Link: https://lore.kernel.org/lkml/CAHk-=wjbvzCAhAtvG0d81W5o0-KT5PPTHhfJ5ieDFq+bGtgOYg@mail.gmail.com/
Acked-by: Al Viro
Signed-off-by: Linus Torvalds

Merge tag 'io_uring-5.12-2021-04-16' of git://git.kernel.dk/linux-block

2021-04-16T23:18:53+00:00

Pull io_uring fix from Jens Axboe:
 "Fix for a potential hang at exit with SQPOLL from Pavel"

* tag 'io_uring-5.12-2021-04-16' of git://git.kernel.dk/linux-block:
  io_uring: fix early sqd_list removal sqpoll hangs

io_uring: fix early sqd_list removal sqpoll hangs

2021-04-14T19:07:27+00:00

[  245.463317] INFO: task iou-sqp-1374:1377 blocked for more than 122 seconds.
[  245.463334] task:iou-sqp-1374    state:D flags:0x00004000
[  245.463345] Call Trace:
[  245.463352]  __schedule+0x36b/0x950
[  245.463376]  schedule+0x68/0xe0
[  245.463385]  __io_uring_cancel+0xfb/0x1a0
[  245.463407]  do_exit+0xc0/0xb40
[  245.463423]  io_sq_thread+0x49b/0x710
[  245.463445]  ret_from_fork+0x22/0x30

It happens when sqpoll forgot to run park_task_work and goes to exit,
then exiting user may remove ctx from sqd_list, and so corresponding
io_sq_thread() -> io_uring_cancel_sqpoll() won't be executed. Hopefully
it just stucks in do_exit() in this case.

Fixes: dbe1bdbb39db ("io_uring: handle signals for IO threads like a normal thread")
Reported-by: Joakim Hassila 
Signed-off-by: Pavel Begunkov 
Signed-off-by: Jens Axboe

Merge tag 'for-5.12-rc6-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/kdave/linux

2021-04-11T18:53:36+00:00

Pull btrfs fix from David Sterba:
 "One more patch that we'd like to get to 5.12 before release.

  It's changing where and how the superblock is stored in the zoned
  mode. It is an on-disk format change but so far there are no
  implications for users as the proper mkfs support hasn't been merged
  and is waiting for the kernel side to settle.

  Until now, the superblocks were derived from the zone index, but zone
  size can differ per device. This is changed to be based on fixed
  offset values, to make it independent of the device zone size.

  The work on that got a bit delayed, we discussed the exact locations
  to support potential device sizes and usecases. (Partially delayed
  also due to my vacation.) Having that in the same release where the
  zoned mode is declared usable is highly desired, there are userspace
  projects that need to be updated to recognize the feature. Pushing
  that to the next release would make things harder to test"

* tag 'for-5.12-rc6-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/kdave/linux:
  btrfs: zoned: move superblock logging zone location

btrfs: zoned: move superblock logging zone location

2021-04-10T10:13:16+00:00

Moves the location of the superblock logging zones. The new locations of
the logging zones are now determined based on fixed block addresses
instead of on fixed zone numbers.

The old placement method based on fixed zone numbers causes problems when
one needs to inspect a file system image without access to the drive zone
information. In such case, the super block locations cannot be reliably
determined as the zone size is unknown. By locating the superblock logging
zones using fixed addresses, we can scan a dumped file system image without
the zone information since a super block copy will always be present at or
after the fixed known locations.

Introduce the following three pairs of zones containing fixed offset
locations, regardless of the device zone size.

  - primary superblock: offset   0B (and the following zone)
  - first copy:         offset 512G (and the following zone)
  - Second copy:        offset   4T (4096G, and the following zone)

If a logging zone is outside of the disk capacity, we do not record the
superblock copy.

The first copy position is much larger than for a non-zoned filesystem,
which is at 64M.  This is to avoid overlapping with the log zones for
the primary superblock. This higher location is arbitrary but allows
supporting devices with very large zone sizes, plus some space around in
between.

Such large zone size is unrealistic and very unlikely to ever be seen in
real devices. Currently, SMR disks have a zone size of 256MB, and we are
expecting ZNS drives to be in the 1-4GB range, so this limit gives us
room to breathe. For now, we only allow zone sizes up to 8GB. The
maximum zone size that would still fit in the space is 256G.

The fixed location addresses are somewhat arbitrary, with the intent of
maintaining superblock reliability for smaller and larger devices, with
the preference for the latter. For this reason, there are two superblocks
under the first 1T. This should cover use cases for physical devices and
for emulated/device-mapper devices.

The superblock logging zones are reserved for superblock logging and
never used for data or metadata blocks. Note that we only reserve the
two zones per primary/copy actually used for superblock logging. We do
not reserve the ranges of zones possibly containing superblocks with the
largest supported zone size (0-16GB, 512G-528GB, 4096G-4112G).

The zones containing the fixed location offsets used to store
superblocks on a non-zoned volume are also reserved to avoid confusion.

Signed-off-by: Naohiro Aota 
Signed-off-by: David Sterba

Merge branch 'akpm' (patches from Andrew)

2021-04-10T00:06:32+00:00

Merge misc fixes from Andrew Morton:
 "14 patches.

  Subsystems affected by this patch series: mm (kasan, gup, pagecache,
  and kfence), MAINTAINERS, mailmap, nds32, gcov, ocfs2, ia64, and lib"

* emailed patches from Andrew Morton :
  lib: fix kconfig dependency on ARCH_WANT_FRAME_POINTERS
  kfence, x86: fix preemptible warning on KPTI-enabled systems
  lib/test_kasan_module.c: suppress unused var warning
  kasan: fix conflict with page poisoning
  fs: direct-io: fix missing sdio->boundary
  ia64: fix user_stack_pointer() for ptrace()
  ocfs2: fix deadlock between setattr and dio_end_io_write
  gcov: re-fix clang-11+ support
  nds32: flush_dcache_page: use page_mapping_file to avoid races with swapoff
  mm/gup: check page posion status for coredump.
  .mailmap: fix old email addresses
  mailmap: update email address for Jordan Crouse
  treewide: change my e-mail address, fix my name
  MAINTAINERS: update CZ.NIC's Turris information