linux-stable.git/fs, branch v4.9.78

proc: fix coredump vs read /proc/*/stat race

2018-01-23T18:57:08+00:00

commit 8bb2ee192e482c5d500df9f2b1b26a560bd3026f upstream.

do_task_stat() accesses IP and SP of a task without bumping reference
count of a stack (which became an entity with independent lifetime at
some point).

Steps to reproduce:

    #include 
    #include 
    #include 
    #include 
    #include 
    #include 
    #include 
    #include 

    int main(void)
    {
    	setrlimit(RLIMIT_CORE, &(struct rlimit){});

    	while (1) {
    		char buf[64];
    		char buf2[4096];
    		pid_t pid;
    		int fd;

    		pid = fork();
    		if (pid == 0) {
    			*(volatile int *)0 = 0;
    		}

    		snprintf(buf, sizeof(buf), "/proc/%u/stat", pid);
    		fd = open(buf, O_RDONLY);
    		read(fd, buf2, sizeof(buf2));
    		close(fd);

    		waitpid(pid, NULL, 0);
    	}
    	return 0;
    }

    BUG: unable to handle kernel paging request at 0000000000003fd8
    IP: do_task_stat+0x8b4/0xaf0
    PGD 800000003d73e067 P4D 800000003d73e067 PUD 3d558067 PMD 0
    Oops: 0000 [#1] PREEMPT SMP PTI
    CPU: 0 PID: 1417 Comm: a.out Not tainted 4.15.0-rc8-dirty #2
    Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.10.2-1.fc27 04/01/2014
    RIP: 0010:do_task_stat+0x8b4/0xaf0
    Call Trace:
     proc_single_show+0x43/0x70
     seq_read+0xe6/0x3b0
     __vfs_read+0x1e/0x120
     vfs_read+0x84/0x110
     SyS_read+0x3d/0xa0
     entry_SYSCALL_64_fastpath+0x13/0x6c
    RIP: 0033:0x7f4d7928cba0
    RSP: 002b:00007ffddb245158 EFLAGS: 00000246
    Code: 03 b7 a0 01 00 00 4c 8b 4c 24 70 4c 8b 44 24 78 4c 89 74 24 18 e9 91 f9 ff ff f6 45 4d 02 0f 84 fd f7 ff ff 48 8b 45 40 48 89 ef <48> 8b 80 d8 3f 00 00 48 89 44 24 20 e8 9b 97 eb ff 48 89 44 24
    RIP: do_task_stat+0x8b4/0xaf0 RSP: ffffc90000607cc8
    CR2: 0000000000003fd8

John Ogness said: for my tests I added an else case to verify that the
race is hit and correctly mitigated.

Link: http://lkml.kernel.org/r/20180116175054.GA11513@avx2
Signed-off-by: Alexey Dobriyan 
Reported-by: "Kohli, Gaurav" 
Tested-by: John Ogness 
Cc: Peter Zijlstra 
Cc: Ingo Molnar 
Cc: Oleg Nesterov 
Signed-off-by: Andrew Morton 
Signed-off-by: Linus Torvalds 
Signed-off-by: Greg Kroah-Hartman

pipe: avoid round_pipe_size() nr_pages overflow on 32-bit

2018-01-23T18:57:06+00:00

commit d3f14c485867cfb2e0c48aa88c41d0ef4bf5209c upstream.

round_pipe_size() contains a right-bit-shift expression which may
overflow, which would cause undefined results in a subsequent
roundup_pow_of_two() call.

  static inline unsigned int round_pipe_size(unsigned int size)
  {
          unsigned long nr_pages;

          nr_pages = (size + PAGE_SIZE - 1) >> PAGE_SHIFT;
          return roundup_pow_of_two(nr_pages) << PAGE_SHIFT;
  }

PAGE_SIZE is defined as (1UL << PAGE_SHIFT), so:
  - 4 bytes wide on 32-bit (0 to 0xffffffff)
  - 8 bytes wide on 64-bit (0 to 0xffffffffffffffff)

That means that 32-bit round_pipe_size(), nr_pages may overflow to 0:

  size=0x00000000    nr_pages=0x0
  size=0x00000001    nr_pages=0x1
  size=0xfffff000    nr_pages=0xfffff
  size=0xfffff001    nr_pages=0x0         << !
  size=0xffffffff    nr_pages=0x0         << !

This is bad because roundup_pow_of_two(n) is undefined when n == 0!

64-bit is not a problem as the unsigned int size is 4 bytes wide
(similar to 32-bit) and the larger, 8 byte wide unsigned long, is
sufficient to handle the largest value of the bit shift expression:

  size=0xffffffff    nr_pages=100000

Modify round_pipe_size() to return 0 if n == 0 and updates its callers to
handle accordingly.

Link: http://lkml.kernel.org/r/1507658689-11669-3-git-send-email-joe.lawrence@redhat.com
Signed-off-by: Joe Lawrence 
Reported-by: Mikulas Patocka 
Reviewed-by: Mikulas Patocka 
Cc: Al Viro 
Cc: Jens Axboe 
Cc: Michael Kerrisk 
Cc: Randy Dunlap 
Cc: Josh Poimboeuf 
Signed-off-by: Andrew Morton 
Signed-off-by: Dong Jinguang 
Signed-off-by: Linus Torvalds 

Signed-off-by: Greg Kroah-Hartman

kernel: make groups_sort calling a responsibility group_info allocators

2018-01-10T08:29:52+00:00

commit bdcf0a423ea1c40bbb40e7ee483b50fc8aa3d758 upstream.

In testing, we found that nfsd threads may call set_groups in parallel
for the same entry cached in auth.unix.gid, racing in the call of
groups_sort, corrupting the groups for that entry and leading to
permission denials for the client.

This patch:
 - Make groups_sort globally visible.
 - Move the call to groups_sort to the modifiers of group_info
 - Remove the call to groups_sort from set_groups

Link: http://lkml.kernel.org/r/20171211151420.18655-1-thiago.becker@gmail.com
Signed-off-by: Thiago Rafael Becker 
Reviewed-by: Matthew Wilcox 
Reviewed-by: NeilBrown 
Acked-by: "J. Bruce Fields" 
Cc: Al Viro 
Cc: Martin Schwidefsky 
Signed-off-by: Andrew Morton 
Signed-off-by: Linus Torvalds 
Signed-off-by: Greg Kroah-Hartman

Btrfs: fix an integer overflow check

2017-12-25T13:23:43+00:00

[ Upstream commit 457ae7268b29c33dee1c0feb143a15f6029d177b ]

This isn't super serious because you need CAP_ADMIN to run this code.

I added this integer overflow check last year but apparently I am
rubbish at writing integer overflow checks...  There are two issues.
First, access_ok() works on unsigned long type and not u64 so on 32 bit
systems the access_ok() could be checking a truncated size.  The other
issue is that we should be using a stricter limit so we don't overflow
the kzalloc() setting ctx->clone_roots later in the function after the
access_ok():

	alloc_size = sizeof(struct clone_root) * (arg->clone_sources_count + 1);
	sctx->clone_roots = kzalloc(alloc_size, GFP_KERNEL | __GFP_NOWARN);

Fixes: f5ecec3ce21f ("btrfs: send: silence an integer overflow warning")
Signed-off-by: Dan Carpenter 
Reviewed-by: David Sterba 
[ added comment ]
Signed-off-by: David Sterba 

Signed-off-by: Sasha Levin 
Signed-off-by: Greg Kroah-Hartman

udf: Avoid overflow when session starts at large offset

2017-12-20T09:07:33+00:00

[ Upstream commit abdc0eb06964fe1d2fea6dd1391b734d0590365d ]

When session starts beyond offset 2^31 the arithmetics in
udf_check_vsd() would overflow. Make sure the computation is done in
large enough type.

Reported-by: Cezary Sliwa 
Signed-off-by: Jan Kara 
Signed-off-by: Sasha Levin 
Signed-off-by: Greg Kroah-Hartman

tty fix oops when rmmod 8250

2017-12-20T09:07:32+00:00

[ Upstream commit c79dde629d2027ca80329c62854a7635e623d527 ]

After rmmod 8250.ko
tty_kref_put starts kwork (release_one_tty) to release proc interface
oops when accessing driver->driver_name in proc_tty_unregister_driver

Use jprobe, found driver->driver_name point to 8250.ko
static static struct uart_driver serial8250_reg
.driver_name= serial,

Use name in proc_dir_entry instead of driver->driver_name to fix oops

test on linux 4.1.12:

BUG: unable to handle kernel paging request at ffffffffa01979de
IP: [] strchr+0x0/0x30
PGD 1a0d067 PUD 1a0e063 PMD 851c1f067 PTE 0
Oops: 0000 [#1] PREEMPT SMP
Modules linked in: ... ...  [last unloaded: 8250]
CPU: 7 PID: 116 Comm: kworker/7:1 Tainted: G           O    4.1.12 #1
Hardware name: Insyde RiverForest/Type2 - Board Product Name1, BIOS NE5KV904 12/21/2015
Workqueue: events release_one_tty
task: ffff88085b684960 ti: ffff880852884000 task.ti: ffff880852884000
RIP: 0010:[]  [] strchr+0x0/0x30
RSP: 0018:ffff880852887c90  EFLAGS: 00010282
RAX: ffffffff81a5eca0 RBX: ffffffffa01979de RCX: 0000000000000004
RDX: ffff880852887d10 RSI: 000000000000002f RDI: ffffffffa01979de
RBP: ffff880852887cd8 R08: 0000000000000000 R09: ffff88085f5d94d0
R10: 0000000000000195 R11: 0000000000000000 R12: ffffffffa01979de
R13: ffff880852887d00 R14: ffffffffa01979de R15: ffff88085f02e840
FS:  0000000000000000(0000) GS:ffff88085f5c0000(0000) knlGS:0000000000000000
CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: ffffffffa01979de CR3: 0000000001a0c000 CR4: 00000000001406e0
Stack:
 ffffffff812349b1 ffff880852887cb8 ffff880852887d10 ffff88085f5cd6c2
 ffff880852800a80 ffffffffa01979de ffff880852800a84 0000000000000010
 ffff88085bb28bd8 ffff880852887d38 ffffffff812354f0 ffff880852887d08
Call Trace:
 [] ? __xlate_proc_name+0x71/0xd0
 [] remove_proc_entry+0x40/0x180
 [] ? _raw_spin_lock_irqsave+0x41/0x60
 [] ? destruct_tty_driver+0x60/0xe0
 [] proc_tty_unregister_driver+0x28/0x40
 [] destruct_tty_driver+0x88/0xe0
 [] tty_driver_kref_put+0x1d/0x20
 [] release_one_tty+0x5a/0xd0
 [] process_one_work+0x139/0x420
 [] worker_thread+0x121/0x450
 [] ? process_scheduled_works+0x40/0x40
 [] kthread+0xec/0x110
 [] ? tg_rt_schedulable+0x210/0x220
 [] ? kthread_freezable_should_stop+0x80/0x80
 [] ret_from_fork+0x42/0x70
 [] ? kthread_freezable_should_stop+0x80/0x80

Signed-off-by: nixiaoming 
Signed-off-by: Greg Kroah-Hartman 
Signed-off-by: Sasha Levin 
Signed-off-by: Greg Kroah-Hartman

xfs: fix incorrect extent state in xfs_bmap_add_extent_unwritten_real

2017-12-20T09:07:31+00:00

[ Upstream commit 5e422f5e4fd71d18bc6b851eeb3864477b3d842e ]

There was one spot in xfs_bmap_add_extent_unwritten_real that didn't use the
passed in new extent state but always converted to normal, leading to wrong
behavior when converting from normal to unwritten.

Only found by code inspection, it seems like this code path to move partial
extent from written to unwritten while merging it with the next extent is
rarely exercised.

Signed-off-by: Christoph Hellwig 
Reviewed-by: Brian Foster 
Reviewed-by: Darrick J. Wong 
Signed-off-by: Darrick J. Wong 
Signed-off-by: Sasha Levin 
Signed-off-by: Greg Kroah-Hartman

xfs: fix log block underflow during recovery cycle verification

2017-12-20T09:07:31+00:00

[ Upstream commit 9f2a4505800607e537e9dd9dea4f55c4b0c30c7a ]

It is possible for mkfs to format very small filesystems with too
small of an internal log with respect to the various minimum size
and block count requirements. If this occurs when the log happens to
be smaller than the scan window used for cycle verification and the
scan wraps the end of the log, the start_blk calculation in
xlog_find_head() underflows and leads to an attempt to scan an
invalid range of log blocks. This results in log recovery failure
and a failed mount.

Since there may be filesystems out in the wild with this kind of
geometry, we cannot simply refuse to mount. Instead, cap the scan
window for cycle verification to the size of the physical log. This
ensures that the cycle verification proceeds as expected when the
scan wraps the end of the log.

Reported-by: Zorro Lang 
Signed-off-by: Brian Foster 
Reviewed-by: Darrick J. Wong 
Signed-off-by: Darrick J. Wong 
Signed-off-by: Sasha Levin 
Signed-off-by: Greg Kroah-Hartman

btrfs: tests: Fix a memory leak in error handling path in 'run_test()'

2017-12-20T09:07:31+00:00

[ Upstream commit 9ca2e97fa3c3216200afe35a3b111ec51cc796d2 ]

If 'btrfs_alloc_path()' fails, we must free the resources already
allocated, as done in the other error handling paths in this function.

Signed-off-by: Christophe JAILLET 
Reviewed-by: Qu Wenruo 
Signed-off-by: David Sterba 
Signed-off-by: Sasha Levin 
Signed-off-by: Greg Kroah-Hartman

GFS2: Take inode off order_write list when setting jdata flag

2017-12-20T09:07:30+00:00

[ Upstream commit cc555b09d8c3817aeebda43a14ab67049a5653f7 ]

This patch fixes a deadlock caused when the jdata flag is set for
inodes that are already on the ordered write list. Since it is
on the ordered write list, log_flush calls gfs2_ordered_write which
calls filemap_fdatawrite. But since the inode had the jdata flag
set, that calls gfs2_jdata_writepages, which tries to start a new
transaction. A new transaction cannot be started because it tries
to acquire the log_flush rwsem which is already locked by the log
flush operation.

The bottom line is: We cannot switch an inode from ordered to jdata
until we eliminate any ordered data pages (via log flush) or any
log_flush operation afterward will create the circular dependency
above. So we need to flush the log before setting the diskflags to
switch the file mode, then we need to remove the inode from the
ordered writes list.

Before this patch, the log flush was done for jdata->ordered, but
that's wrong. If we're going from jdata to ordered, we don't need
to call gfs2_log_flush because the call to filemap_fdatawrite will
do it for us:

   filemap_fdatawrite() -> __filemap_fdatawrite_range()
      __filemap_fdatawrite_range() -> do_writepages()
         do_writepages() -> gfs2_jdata_writepages()
            gfs2_jdata_writepages() -> gfs2_log_flush()

This patch modifies function do_gfs2_set_flags so that if a file
has its jdata flag set, and it's already on the ordered write list,
the log will be flushed and it will be removed from the list
before setting the flag.

Signed-off-by: Bob Peterson 
Signed-off-by: Andreas Gruenbacher 
Acked-by: Abhijith Das 
Signed-off-by: Sasha Levin 
Signed-off-by: Greg Kroah-Hartman