linux-stable.git/fs, branch v4.4.231

fuse: Fix parameter for FS_IOC_{GET,SET}FLAGS

2020-07-22T07:10:06+00:00

commit 31070f6ccec09f3bd4f1e28cd1e592fa4f3ba0b6 upstream.

The ioctl encoding for this parameter is a long but the documentation says
it should be an int and the kernel drivers expect it to be an int.  If the
fuse driver treats this as a long it might end up scribbling over the stack
of a userspace process that only allocated enough space for an int.

This was previously discussed in [1] and a patch for fuse was proposed in
[2].  From what I can tell the patch in [2] was nacked in favor of adding
new, "fixed" ioctls and using those from userspace.  However there is still
no "fixed" version of these ioctls and the fact is that it's sometimes
infeasible to change all userspace to use the new one.

Handling the ioctls specially in the fuse driver seems like the most
pragmatic way for fuse servers to support them without causing crashes in
userspace applications that call them.

[1]: https://lore.kernel.org/linux-fsdevel/20131126200559.GH20559@hall.aurel32.net/T/
[2]: https://sourceforge.net/p/fuse/mailman/message/31771759/

Signed-off-by: Chirantan Ekbote 
Fixes: 59efec7b9039 ("fuse: implement ioctl support")
Cc: 
Signed-off-by: Miklos Szeredi 
Signed-off-by: Greg Kroah-Hartman

btrfs: fix fatal extent_buffer readahead vs releasepage race

2020-07-22T07:10:02+00:00

commit 6bf9cd2eed9aee6d742bb9296c994a91f5316949 upstream.

Under somewhat convoluted conditions, it is possible to attempt to
release an extent_buffer that is under io, which triggers a BUG_ON in
btrfs_release_extent_buffer_pages.

This relies on a few different factors. First, extent_buffer reads done
as readahead for searching use WAIT_NONE, so they free the local extent
buffer reference while the io is outstanding. However, they should still
be protected by TREE_REF. However, if the system is doing signficant
reclaim, and simultaneously heavily accessing the extent_buffers, it is
possible for releasepage to race with two concurrent readahead attempts
in a way that leaves TREE_REF unset when the readahead extent buffer is
released.

Essentially, if two tasks race to allocate a new extent_buffer, but the
winner who attempts the first io is rebuffed by a page being locked
(likely by the reclaim itself) then the loser will still go ahead with
issuing the readahead. The loser's call to find_extent_buffer must also
race with the reclaim task reading the extent_buffer's refcount as 1 in
a way that allows the reclaim to re-clear the TREE_REF checked by
find_extent_buffer.

The following represents an example execution demonstrating the race:

            CPU0                                                         CPU1                                           CPU2
reada_for_search                                            reada_for_search
  readahead_tree_block                                        readahead_tree_block
    find_create_tree_block                                      find_create_tree_block
      alloc_extent_buffer                                         alloc_extent_buffer
                                                                  find_extent_buffer // not found
                                                                  allocates eb
                                                                  lock pages
                                                                  associate pages to eb
                                                                  insert eb into radix tree
                                                                  set TREE_REF, refs == 2
                                                                  unlock pages
                                                              read_extent_buffer_pages // WAIT_NONE
                                                                not uptodate (brand new eb)
                                                                                                            lock_page
                                                                if !trylock_page
                                                                  goto unlock_exit // not an error
                                                              free_extent_buffer
                                                                release_extent_buffer
                                                                  atomic_dec_and_test refs to 1
        find_extent_buffer // found
                                                                                                            try_release_extent_buffer
                                                                                                              take refs_lock
                                                                                                              reads refs == 1; no io
          atomic_inc_not_zero refs to 2
          mark_buffer_accessed
            check_buffer_tree_ref
              // not STALE, won't take refs_lock
              refs == 2; TREE_REF set // no action
    read_extent_buffer_pages // WAIT_NONE
                                                                                                              clear TREE_REF
                                                                                                              release_extent_buffer
                                                                                                                atomic_dec_and_test refs to 1
                                                                                                                unlock_page
      still not uptodate (CPU1 read failed on trylock_page)
      locks pages
      set io_pages > 0
      submit io
      return
    free_extent_buffer
      release_extent_buffer
        dec refs to 0
        delete from radix tree
        btrfs_release_extent_buffer_pages
          BUG_ON(io_pages > 0)!!!

We observe this at a very low rate in production and were also able to
reproduce it in a test environment by introducing some spurious delays
and by introducing probabilistic trylock_page failures.

To fix it, we apply check_tree_ref at a point where it could not
possibly be unset by a competing task: after io_pages has been
incremented. All the codepaths that clear TREE_REF check for io, so they
would not be able to clear it after this point until the io is done.

Stack trace, for reference:
[1417839.424739] ------------[ cut here ]------------
[1417839.435328] kernel BUG at fs/btrfs/extent_io.c:4841!
[1417839.447024] invalid opcode: 0000 [#1] SMP
[1417839.502972] RIP: 0010:btrfs_release_extent_buffer_pages+0x20/0x1f0
[1417839.517008] Code: ed e9 ...
[1417839.558895] RSP: 0018:ffffc90020bcf798 EFLAGS: 00010202
[1417839.570816] RAX: 0000000000000002 RBX: ffff888102d6def0 RCX: 0000000000000028
[1417839.586962] RDX: 0000000000000002 RSI: ffff8887f0296482 RDI: ffff888102d6def0
[1417839.603108] RBP: ffff88885664a000 R08: 0000000000000046 R09: 0000000000000238
[1417839.619255] R10: 0000000000000028 R11: ffff88885664af68 R12: 0000000000000000
[1417839.635402] R13: 0000000000000000 R14: ffff88875f573ad0 R15: ffff888797aafd90
[1417839.651549] FS:  00007f5a844fa700(0000) GS:ffff88885f680000(0000) knlGS:0000000000000000
[1417839.669810] CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[1417839.682887] CR2: 00007f7884541fe0 CR3: 000000049f609002 CR4: 00000000003606e0
[1417839.699037] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
[1417839.715187] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400
[1417839.731320] Call Trace:
[1417839.737103]  release_extent_buffer+0x39/0x90
[1417839.746913]  read_block_for_search.isra.38+0x2a3/0x370
[1417839.758645]  btrfs_search_slot+0x260/0x9b0
[1417839.768054]  btrfs_lookup_file_extent+0x4a/0x70
[1417839.778427]  btrfs_get_extent+0x15f/0x830
[1417839.787665]  ? submit_extent_page+0xc4/0x1c0
[1417839.797474]  ? __do_readpage+0x299/0x7a0
[1417839.806515]  __do_readpage+0x33b/0x7a0
[1417839.815171]  ? btrfs_releasepage+0x70/0x70
[1417839.824597]  extent_readpages+0x28f/0x400
[1417839.833836]  read_pages+0x6a/0x1c0
[1417839.841729]  ? startup_64+0x2/0x30
[1417839.849624]  __do_page_cache_readahead+0x13c/0x1a0
[1417839.860590]  filemap_fault+0x6c7/0x990
[1417839.869252]  ? xas_load+0x8/0x80
[1417839.876756]  ? xas_find+0x150/0x190
[1417839.884839]  ? filemap_map_pages+0x295/0x3b0
[1417839.894652]  __do_fault+0x32/0x110
[1417839.902540]  __handle_mm_fault+0xacd/0x1000
[1417839.912156]  handle_mm_fault+0xaa/0x1c0
[1417839.921004]  __do_page_fault+0x242/0x4b0
[1417839.930044]  ? page_fault+0x8/0x30
[1417839.937933]  page_fault+0x1e/0x30
[1417839.945631] RIP: 0033:0x33c4bae
[1417839.952927] Code: Bad RIP value.
[1417839.960411] RSP: 002b:00007f5a844f7350 EFLAGS: 00010206
[1417839.972331] RAX: 000000000000006e RBX: 1614b3ff6a50398a RCX: 0000000000000000
[1417839.988477] RDX: 0000000000000000 RSI: 0000000000000000 RDI: 0000000000000002
[1417840.004626] RBP: 00007f5a844f7420 R08: 000000000000006e R09: 00007f5a94aeccb8
[1417840.020784] R10: 00007f5a844f7350 R11: 0000000000000000 R12: 00007f5a94aecc79
[1417840.036932] R13: 00007f5a94aecc78 R14: 00007f5a94aecc90 R15: 00007f5a94aecc40

CC: stable@vger.kernel.org # 4.4+
Reviewed-by: Filipe Manana 
Signed-off-by: Boris Burkov 
Signed-off-by: David Sterba 
Signed-off-by: Greg Kroah-Hartman

cifs: Fix the target file was deleted when rename failed.

2020-07-09T07:35:09+00:00

commit 9ffad9263b467efd8f8dc7ae1941a0a655a2bab2 upstream.

When xfstest generic/035, we found the target file was deleted
if the rename return -EACESS.

In cifs_rename2, we unlink the positive target dentry if rename
failed with EACESS or EEXIST, even if the target dentry is positived
before rename. Then the existing file was deleted.

We should just delete the target file which created during the
rename.

Reported-by: Hulk Robot 
Signed-off-by: Zhang Xiaoxu 
Cc: stable@vger.kernel.org
Signed-off-by: Steve French 
Reviewed-by: Aurelien Aptel 
Signed-off-by: Greg Kroah-Hartman

SMB3: Honor persistent/resilient handle flags for multiuser mounts

2020-07-09T07:35:09+00:00

commit 00dfbc2f9c61185a2e662f27c45a0bb29b2a134f upstream.

Without this:

- persistent handles will only be enabled for per-user tcons if the
  server advertises the 'Continuous Availabity' capability
- resilient handles would never be enabled for per-user tcons

Signed-off-by: Paul Aurich 
CC: Stable 
Signed-off-by: Steve French 
Reviewed-by: Aurelien Aptel 
Signed-off-by: Greg Kroah-Hartman

SMB3: Honor 'seal' flag for multiuser mounts

2020-07-09T07:35:09+00:00

commit cc15461c73d7d044d56c47e869a215e49bd429c8 upstream.

Ensure multiuser SMB3 mounts use encryption for all users' tcons if the
mount options are configured to require encryption. Without this, only
the primary tcon and IPC tcons are guaranteed to be encrypted. Per-user
tcons would only be encrypted if the server was configured to require
encryption.

Signed-off-by: Paul Aurich 
CC: Stable 
Signed-off-by: Steve French 
Reviewed-by: Aurelien Aptel 
Signed-off-by: Greg Kroah-Hartman

btrfs: fix data block group relocation failure due to concurrent scrub

2020-07-09T07:35:07+00:00

[ Upstream commit 432cd2a10f1c10cead91fe706ff5dc52f06d642a ]

When running relocation of a data block group while scrub is running in
parallel, it is possible that the relocation will fail and abort the
current transaction with an -EINVAL error:

   [134243.988595] BTRFS info (device sdc): found 14 extents, stage: move data extents
   [134243.999871] ------------[ cut here ]------------
   [134244.000741] BTRFS: Transaction aborted (error -22)
   [134244.001692] WARNING: CPU: 0 PID: 26954 at fs/btrfs/ctree.c:1071 __btrfs_cow_block+0x6a7/0x790 [btrfs]
   [134244.003380] Modules linked in: btrfs blake2b_generic xor raid6_pq (...)
   [134244.012577] CPU: 0 PID: 26954 Comm: btrfs Tainted: G        W         5.6.0-rc7-btrfs-next-58 #5
   [134244.014162] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.12.0-59-gc9ba5276e321-prebuilt.qemu.org 04/01/2014
   [134244.016184] RIP: 0010:__btrfs_cow_block+0x6a7/0x790 [btrfs]
   [134244.017151] Code: 48 c7 c7 (...)
   [134244.020549] RSP: 0018:ffffa41607863888 EFLAGS: 00010286
   [134244.021515] RAX: 0000000000000000 RBX: ffff9614bdfe09c8 RCX: 0000000000000000
   [134244.022822] RDX: 0000000000000001 RSI: ffffffffb3d63980 RDI: 0000000000000001
   [134244.024124] RBP: ffff961589e8c000 R08: 0000000000000000 R09: 0000000000000001
   [134244.025424] R10: ffffffffc0ae5955 R11: 0000000000000000 R12: ffff9614bd530d08
   [134244.026725] R13: ffff9614ced41b88 R14: ffff9614bdfe2a48 R15: 0000000000000000
   [134244.028024] FS:  00007f29b63c08c0(0000) GS:ffff9615ba600000(0000) knlGS:0000000000000000
   [134244.029491] CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
   [134244.030560] CR2: 00007f4eb339b000 CR3: 0000000130d6e006 CR4: 00000000003606f0
   [134244.031997] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
   [134244.033153] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400
   [134244.034484] Call Trace:
   [134244.034984]  btrfs_cow_block+0x12b/0x2b0 [btrfs]
   [134244.035859]  do_relocation+0x30b/0x790 [btrfs]
   [134244.036681]  ? do_raw_spin_unlock+0x49/0xc0
   [134244.037460]  ? _raw_spin_unlock+0x29/0x40
   [134244.038235]  relocate_tree_blocks+0x37b/0x730 [btrfs]
   [134244.039245]  relocate_block_group+0x388/0x770 [btrfs]
   [134244.040228]  btrfs_relocate_block_group+0x161/0x2e0 [btrfs]
   [134244.041323]  btrfs_relocate_chunk+0x36/0x110 [btrfs]
   [134244.041345]  btrfs_balance+0xc06/0x1860 [btrfs]
   [134244.043382]  ? btrfs_ioctl_balance+0x27c/0x310 [btrfs]
   [134244.045586]  btrfs_ioctl_balance+0x1ed/0x310 [btrfs]
   [134244.045611]  btrfs_ioctl+0x1880/0x3760 [btrfs]
   [134244.049043]  ? do_raw_spin_unlock+0x49/0xc0
   [134244.049838]  ? _raw_spin_unlock+0x29/0x40
   [134244.050587]  ? __handle_mm_fault+0x11b3/0x14b0
   [134244.051417]  ? ksys_ioctl+0x92/0xb0
   [134244.052070]  ksys_ioctl+0x92/0xb0
   [134244.052701]  ? trace_hardirqs_off_thunk+0x1a/0x1c
   [134244.053511]  __x64_sys_ioctl+0x16/0x20
   [134244.054206]  do_syscall_64+0x5c/0x280
   [134244.054891]  entry_SYSCALL_64_after_hwframe+0x49/0xbe
   [134244.055819] RIP: 0033:0x7f29b51c9dd7
   [134244.056491] Code: 00 00 00 (...)
   [134244.059767] RSP: 002b:00007ffcccc1dd08 EFLAGS: 00000202 ORIG_RAX: 0000000000000010
   [134244.061168] RAX: ffffffffffffffda RBX: 0000000000000001 RCX: 00007f29b51c9dd7
   [134244.062474] RDX: 00007ffcccc1dda0 RSI: 00000000c4009420 RDI: 0000000000000003
   [134244.063771] RBP: 0000000000000003 R08: 00005565cea4b000 R09: 0000000000000000
   [134244.065032] R10: 0000000000000541 R11: 0000000000000202 R12: 00007ffcccc2060a
   [134244.066327] R13: 00007ffcccc1dda0 R14: 0000000000000002 R15: 00007ffcccc1dec0
   [134244.067626] irq event stamp: 0
   [134244.068202] hardirqs last  enabled at (0): [<0000000000000000>] 0x0
   [134244.069351] hardirqs last disabled at (0): [] copy_process+0x74f/0x2020
   [134244.070909] softirqs last  enabled at (0): [] copy_process+0x74f/0x2020
   [134244.072392] softirqs last disabled at (0): [<0000000000000000>] 0x0
   [134244.073432] ---[ end trace bd7c03622e0b0a99 ]---

The -EINVAL error comes from the following chain of function calls:

  __btrfs_cow_block() <-- aborts the transaction
    btrfs_reloc_cow_block()
      replace_file_extents()
        get_new_location() <-- returns -EINVAL

When relocating a data block group, for each allocated extent of the block
group, we preallocate another extent (at prealloc_file_extent_cluster()),
associated with the data relocation inode, and then dirty all its pages.
These preallocated extents have, and must have, the same size that extents
from the data block group being relocated have.

Later before we start the relocation stage that updates pointers (bytenr
field of file extent items) to point to the the new extents, we trigger
writeback for the data relocation inode. The expectation is that writeback
will write the pages to the previously preallocated extents, that it
follows the NOCOW path. That is generally the case, however, if a scrub
is running it may have turned the block group that contains those extents
into RO mode, in which case writeback falls back to the COW path.

However in the COW path instead of allocating exactly one extent with the
expected size, the allocator may end up allocating several smaller extents
due to free space fragmentation - because we tell it at cow_file_range()
that the minimum allocation size can match the filesystem's sector size.
This later breaks the relocation's expectation that an extent associated
to a file extent item in the data relocation inode has the same size as
the respective extent pointed by a file extent item in another tree - in
this case the extent to which the relocation inode poins to is smaller,
causing relocation.c:get_new_location() to return -EINVAL.

For example, if we are relocating a data block group X that has a logical
address of X and the block group has an extent allocated at the logical
address X + 128KiB with a size of 64KiB:

1) At prealloc_file_extent_cluster() we allocate an extent for the data
   relocation inode with a size of 64KiB and associate it to the file
   offset 128KiB (X + 128KiB - X) of the data relocation inode. This
   preallocated extent was allocated at block group Z;

2) A scrub running in parallel turns block group Z into RO mode and
   starts scrubing its extents;

3) Relocation triggers writeback for the data relocation inode;

4) When running delalloc (btrfs_run_delalloc_range()), we try first the
   NOCOW path because the data relocation inode has BTRFS_INODE_PREALLOC
   set in its flags. However, because block group Z is in RO mode, the
   NOCOW path (run_delalloc_nocow()) falls back into the COW path, by
   calling cow_file_range();

5) At cow_file_range(), in the first iteration of the while loop we call
   btrfs_reserve_extent() to allocate a 64KiB extent and pass it a minimum
   allocation size of 4KiB (fs_info->sectorsize). Due to free space
   fragmentation, btrfs_reserve_extent() ends up allocating two extents
   of 32KiB each, each one on a different iteration of that while loop;

6) Writeback of the data relocation inode completes;

7) Relocation proceeds and ends up at relocation.c:replace_file_extents(),
   with a leaf which has a file extent item that points to the data extent
   from block group X, that has a logical address (bytenr) of X + 128KiB
   and a size of 64KiB. Then it calls get_new_location(), which does a
   lookup in the data relocation tree for a file extent item starting at
   offset 128KiB (X + 128KiB - X) and belonging to the data relocation
   inode. It finds a corresponding file extent item, however that item
   points to an extent that has a size of 32KiB, which doesn't match the
   expected size of 64KiB, resuling in -EINVAL being returned from this
   function and propagated up to __btrfs_cow_block(), which aborts the
   current transaction.

To fix this make sure that at cow_file_range() when we call the allocator
we pass it a minimum allocation size corresponding the desired extent size
if the inode belongs to the data relocation tree, otherwise pass it the
filesystem's sector size as the minimum allocation size.

CC: stable@vger.kernel.org # 4.4+
Reviewed-by: Josef Bacik 
Signed-off-by: Filipe Manana 
Signed-off-by: David Sterba 
Signed-off-by: Sasha Levin

btrfs: cow_file_range() num_bytes and disk_num_bytes are same

2020-07-09T07:35:07+00:00

[ Upstream commit 3752d22fcea160cc2493e34f5e0e41cdd7fdd921 ]

This patch deletes local variable disk_num_bytes as its value
is same as num_bytes in the function cow_file_range().

Signed-off-by: Anand Jain 
Reviewed-by: Nikolay Borisov 
Reviewed-by: David Sterba 
Signed-off-by: David Sterba 
Signed-off-by: Sasha Levin

NFSv4 fix CLOSE not waiting for direct IO compeletion

2020-06-30T00:08:04+00:00

commit d03727b248d0dae6199569a8d7b629a681154633 upstream.

Figuring out the root case for the REMOVE/CLOSE race and
suggesting the solution was done by Neil Brown.

Currently what happens is that direct IO calls hold a reference
on the open context which is decremented as an asynchronous task
in the nfs_direct_complete(). Before reference is decremented,
control is returned to the application which is free to close the
file. When close is being processed, it decrements its reference
on the open_context but since directIO still holds one, it doesn't
sent a close on the wire. It returns control to the application
which is free to do other operations. For instance, it can delete a
file. Direct IO is finally releasing its reference and triggering
an asynchronous close. Which races with the REMOVE. On the server,
REMOVE can be processed before the CLOSE, failing the REMOVE with
EACCES as the file is still opened.

Signed-off-by: Olga Kornievskaia 
Suggested-by: Neil Brown 
CC: stable@vger.kernel.org
Signed-off-by: Anna Schumaker 
Signed-off-by: Greg Kroah-Hartman

pNFS/flexfiles: Fix list corruption if the mirror count changes

2020-06-30T00:08:04+00:00

commit 8b04013737341442ed914b336cde866b902664ae upstream.

If the mirror count changes in the new layout we pick up inside
ff_layout_pg_init_write(), then we can end up adding the
request to the wrong mirror and corrupting the mirror->pg_list.

Fixes: d600ad1f2bdb ("NFS41: pop some layoutget errors to application")
Cc: stable@vger.kernel.org
Signed-off-by: Trond Myklebust 
Signed-off-by: Anna Schumaker 
Signed-off-by: Greg Kroah-Hartman

ocfs2: fix panic on nfs server over ocfs2

2020-06-30T00:08:03+00:00

commit e5a15e17a78d58f933d17cafedfcf7486a29f5b4 upstream.

The following kernel panic was captured when running nfs server over
ocfs2, at that time ocfs2_test_inode_bit() was checking whether one
inode locating at "blkno" 5 was valid, that is ocfs2 root inode, its
"suballoc_slot" was OCFS2_INVALID_SLOT(65535) and it was allocted from
//global_inode_alloc, but here it wrongly assumed that it was got from per
slot inode alloctor which would cause array overflow and trigger kernel
panic.

  BUG: unable to handle kernel paging request at 0000000000001088
  IP: [] _raw_spin_lock+0x18/0xf0
  PGD 1e06ba067 PUD 1e9e7d067 PMD 0
  Oops: 0002 [#1] SMP
  CPU: 6 PID: 24873 Comm: nfsd Not tainted 4.1.12-124.36.1.el6uek.x86_64 #2
  Hardware name: Huawei CH121 V3/IT11SGCA1, BIOS 3.87 02/02/2018
  RIP: _raw_spin_lock+0x18/0xf0
  RSP: e02b:ffff88005ae97908  EFLAGS: 00010206
  RAX: ffff88005ae98000 RBX: 0000000000001088 RCX: 0000000000000000
  RDX: 0000000000020000 RSI: 0000000000000009 RDI: 0000000000001088
  RBP: ffff88005ae97928 R08: 0000000000000000 R09: ffff880212878e00
  R10: 0000000000007ff0 R11: 0000000000000000 R12: 0000000000001088
  R13: ffff8800063c0aa8 R14: ffff8800650c27d0 R15: 000000000000ffff
  FS:  0000000000000000(0000) GS:ffff880218180000(0000) knlGS:ffff880218180000
  CS:  e033 DS: 0000 ES: 0000 CR0: 0000000080050033
  CR2: 0000000000001088 CR3: 00000002033d0000 CR4: 0000000000042660
  Call Trace:
    igrab+0x1e/0x60
    ocfs2_get_system_file_inode+0x63/0x3a0 [ocfs2]
    ocfs2_test_inode_bit+0x328/0xa00 [ocfs2]
    ocfs2_get_parent+0xba/0x3e0 [ocfs2]
    reconnect_path+0xb5/0x300
    exportfs_decode_fh+0xf6/0x2b0
    fh_verify+0x350/0x660 [nfsd]
    nfsd4_putfh+0x4d/0x60 [nfsd]
    nfsd4_proc_compound+0x3d3/0x6f0 [nfsd]
    nfsd_dispatch+0xe0/0x290 [nfsd]
    svc_process_common+0x412/0x6a0 [sunrpc]
    svc_process+0x123/0x210 [sunrpc]
    nfsd+0xff/0x170 [nfsd]
    kthread+0xcb/0xf0
    ret_from_fork+0x61/0x90
  Code: 83 c2 02 0f b7 f2 e8 18 dc 91 ff 66 90 eb bf 0f 1f 40 00 55 48 89 e5 41 56 41 55 41 54 53 0f 1f 44 00 00 48 89 fb ba 00 00 02 00  0f c1 17 89 d0 45 31 e4 45 31 ed c1 e8 10 66 39 d0 41 89 c6
  RIP   _raw_spin_lock+0x18/0xf0
  CR2: 0000000000001088
  ---[ end trace 7264463cd1aac8f9 ]---
  Kernel panic - not syncing: Fatal exception

Link: http://lkml.kernel.org/r/20200616183829.87211-4-junxiao.bi@oracle.com
Signed-off-by: Junxiao Bi 
Reviewed-by: Joseph Qi 
Cc: Changwei Ge 
Cc: Gang He 
Cc: Joel Becker 
Cc: Jun Piao 
Cc: Mark Fasheh 
Cc: 
Signed-off-by: Andrew Morton 
Signed-off-by: Linus Torvalds 
Signed-off-by: Greg Kroah-Hartman