linux-stable.git/fs, branch v4.19.286

btrfs: unset reloc control if transaction commit fails in prepare_to_relocate()

2023-06-14T08:57:14+00:00

commit 85f02d6c856b9f3a0acf5219de6e32f58b9778eb upstream.

In btrfs_relocate_block_group(), the rc is allocated.  Then
btrfs_relocate_block_group() calls

relocate_block_group()
  prepare_to_relocate()
    set_reloc_control()

that assigns rc to the variable fs_info->reloc_ctl. When
prepare_to_relocate() returns, it calls

btrfs_commit_transaction()
  btrfs_start_dirty_block_groups()
    btrfs_alloc_path()
      kmem_cache_zalloc()

which may fail for example (or other errors could happen). When the
failure occurs, btrfs_relocate_block_group() detects the error and frees
rc and doesn't set fs_info->reloc_ctl to NULL. After that, in
btrfs_init_reloc_root(), rc is retrieved from fs_info->reloc_ctl and
then used, which may cause a use-after-free bug.

This possible bug can be triggered by calling btrfs_ioctl_balance()
before calling btrfs_ioctl_defrag().

To fix this possible bug, in prepare_to_relocate(), check if
btrfs_commit_transaction() fails. If the failure occurs,
unset_reloc_control() is called to set fs_info->reloc_ctl to NULL.

The error log in our fault-injection testing is shown as follows:

  [   58.751070] BUG: KASAN: use-after-free in btrfs_init_reloc_root+0x7ca/0x920 [btrfs]
  ...
  [   58.753577] Call Trace:
  ...
  [   58.755800]  kasan_report+0x45/0x60
  [   58.756066]  btrfs_init_reloc_root+0x7ca/0x920 [btrfs]
  [   58.757304]  record_root_in_trans+0x792/0xa10 [btrfs]
  [   58.757748]  btrfs_record_root_in_trans+0x463/0x4f0 [btrfs]
  [   58.758231]  start_transaction+0x896/0x2950 [btrfs]
  [   58.758661]  btrfs_defrag_root+0x250/0xc00 [btrfs]
  [   58.759083]  btrfs_ioctl_defrag+0x467/0xa00 [btrfs]
  [   58.759513]  btrfs_ioctl+0x3c95/0x114e0 [btrfs]
  ...
  [   58.768510] Allocated by task 23683:
  [   58.768777]  ____kasan_kmalloc+0xb5/0xf0
  [   58.769069]  __kmalloc+0x227/0x3d0
  [   58.769325]  alloc_reloc_control+0x10a/0x3d0 [btrfs]
  [   58.769755]  btrfs_relocate_block_group+0x7aa/0x1e20 [btrfs]
  [   58.770228]  btrfs_relocate_chunk+0xf1/0x760 [btrfs]
  [   58.770655]  __btrfs_balance+0x1326/0x1f10 [btrfs]
  [   58.771071]  btrfs_balance+0x3150/0x3d30 [btrfs]
  [   58.771472]  btrfs_ioctl_balance+0xd84/0x1410 [btrfs]
  [   58.771902]  btrfs_ioctl+0x4caa/0x114e0 [btrfs]
  ...
  [   58.773337] Freed by task 23683:
  ...
  [   58.774815]  kfree+0xda/0x2b0
  [   58.775038]  free_reloc_control+0x1d6/0x220 [btrfs]
  [   58.775465]  btrfs_relocate_block_group+0x115c/0x1e20 [btrfs]
  [   58.775944]  btrfs_relocate_chunk+0xf1/0x760 [btrfs]
  [   58.776369]  __btrfs_balance+0x1326/0x1f10 [btrfs]
  [   58.776784]  btrfs_balance+0x3150/0x3d30 [btrfs]
  [   58.777185]  btrfs_ioctl_balance+0xd84/0x1410 [btrfs]
  [   58.777621]  btrfs_ioctl+0x4caa/0x114e0 [btrfs]
  ...

Reported-by: TOTE Robot 
CC: stable@vger.kernel.org # 5.15+
Reviewed-by: Sweet Tea Dorminy 
Reviewed-by: Nikolay Borisov 
Signed-off-by: Zixuan Fu 
Signed-off-by: David Sterba 
Signed-off-by: Stefan Ghinea 
Signed-off-by: Greg Kroah-Hartman

btrfs: check return value of btrfs_commit_transaction in relocation

2023-06-14T08:57:14+00:00

commit fb686c6824dd6294ca772b92424b8fba666e7d00 upstream.

There are a few places where we don't check the return value of
btrfs_commit_transaction in relocation.c.  Thankfully all these places
have straightforward error handling, so simply change all of the sites
at once.

Reviewed-by: Qu Wenruo 
Signed-off-by: Josef Bacik 
Reviewed-by: David Sterba 
Signed-off-by: David Sterba 
Signed-off-by: Stefan Ghinea 
Signed-off-by: Greg Kroah-Hartman

ext4: only check dquot_initialize_needed() when debugging

2023-06-14T08:57:14+00:00

commit dea9d8f7643fab07bf89a1155f1f94f37d096a5e upstream.

ext4_xattr_block_set() relies on its caller to call dquot_initialize()
on the inode.  To assure that this has happened there are WARN_ON
checks.  Unfortunately, this is subject to false positives if there is
an antagonist thread which is flipping the file system at high rates
between r/o and rw.  So only do the check if EXT4_XATTR_DEBUG is
enabled.

Link: https://lore.kernel.org/r/20230608044056.GA1418535@mit.edu
Signed-off-by: Theodore Ts'o 
Signed-off-by: Greg Kroah-Hartman

ceph: fix use-after-free bug for inodes when flushing capsnaps

2023-06-14T08:57:14+00:00

commit 409e873ea3c1fd3079909718bbeb06ac1ec7f38b upstream.

There is a race between capsnaps flush and removing the inode from
'mdsc->snap_flush_list' list:

   == Thread A ==                     == Thread B ==
ceph_queue_cap_snap()
 -> allocate 'capsnapA'
 ->ihold('&ci->vfs_inode')
 ->add 'capsnapA' to 'ci->i_cap_snaps'
 ->add 'ci' to 'mdsc->snap_flush_list'
    ...
   == Thread C ==
ceph_flush_snaps()
 ->__ceph_flush_snaps()
  ->__send_flush_snap()
                                handle_cap_flushsnap_ack()
                                 ->iput('&ci->vfs_inode')
                                   this also will release 'ci'
                                    ...
				      == Thread D ==
                                ceph_handle_snap()
                                 ->flush_snaps()
                                  ->iterate 'mdsc->snap_flush_list'
                                   ->get the stale 'ci'
 ->remove 'ci' from                ->ihold(&ci->vfs_inode) this
   'mdsc->snap_flush_list'           will WARNING

To fix this we will increase the inode's i_count ref when adding 'ci'
to the 'mdsc->snap_flush_list' list.

[ idryomov: need_put int -> bool ]

Cc: stable@vger.kernel.org
Link: https://bugzilla.redhat.com/show_bug.cgi?id=2209299
Signed-off-by: Xiubo Li 
Reviewed-by: Milind Changire 
Reviewed-by: Ilya Dryomov 
Signed-off-by: Ilya Dryomov 
Signed-off-by: Greg Kroah-Hartman

ext4: add lockdep annotations for i_data_sem for ea_inode's

2023-06-09T08:24:03+00:00

commit aff3bea95388299eec63440389b4545c8041b357 upstream.

Treat i_data_sem for ea_inodes as being in their own lockdep class to
avoid lockdep complaints about ext4_setattr's use of inode_lock() on
normal inodes potentially causing lock ordering with i_data_sem on
ea_inodes in ext4_xattr_inode_write().  However, ea_inodes will be
operated on by ext4_setattr(), so this isn't a problem.

Cc: stable@kernel.org
Link: https://syzkaller.appspot.com/bug?extid=298c5d8fb4a128bc27b0
Reported-by: syzbot+298c5d8fb4a128bc27b0@syzkaller.appspotmail.com
Signed-off-by: Theodore Ts'o 
Link: https://lore.kernel.org/r/20230524034951.779531-5-tytso@mit.edu
Signed-off-by: Theodore Ts'o 
Signed-off-by: Greg Kroah-Hartman

ocfs2/dlm: move BITS_TO_BYTES() to bitops.h for wider use

2023-06-09T08:23:56+00:00

[ Upstream commit dd3e7cba16274831f5a69f071ed3cf13ffb352ea ]

There are users already and will be more of BITS_TO_BYTES() macro.  Move
it to bitops.h for wider use.

In the case of ocfs2 the replacement is identical.

As for bnx2x, there are two places where floor version is used.  In the
first case to calculate the amount of structures that can fit one memory
page.  In this case obviously the ceiling variant is correct and
original code might have a potential bug, if amount of bits % 8 is not
0.  In the second case the macro is used to calculate bytes transmitted
in one microsecond.  This will work for all speeds which is multiply of
1Gbps without any change, for the rest new code will give ceiling value,
for instance 100Mbps will give 13 bytes, while old code gives 12 bytes
and the arithmetically correct one is 12.5 bytes.  Further the value is
used to setup timer threshold which in any case has its own margins due
to certain resolution.  I don't see here an issue with slightly shifting
thresholds for low speed connections, the card is supposed to utilize
highest available rate, which is usually 10Gbps.

Link: http://lkml.kernel.org/r/20200108121316.22411-1-andriy.shevchenko@linux.intel.com
Signed-off-by: Andy Shevchenko 
Reviewed-by: Joseph Qi 
Acked-by: Sudarsana Reddy Kalluru 
Cc: Mark Fasheh 
Cc: Joel Becker 
Cc: Junxiao Bi 
Cc: Changwei Ge 
Cc: Gang He 
Cc: Jun Piao 
Signed-off-by: Andrew Morton 
Signed-off-by: Linus Torvalds 
Stable-dep-of: f4e4534850a9 ("net/netlink: fix NETLINK_LIST_MEMBERSHIPS length report")
Signed-off-by: Sasha Levin

btrfs: use nofs when cleaning up aborted transactions

2023-05-30T11:42:13+00:00

commit 597441b3436a43011f31ce71dc0a6c0bf5ce958a upstream.

Our CI system caught a lockdep splat:

  ======================================================
  WARNING: possible circular locking dependency detected
  6.3.0-rc7+ #1167 Not tainted
  ------------------------------------------------------
  kswapd0/46 is trying to acquire lock:
  ffff8c6543abd650 (sb_internal#2){++++}-{0:0}, at: btrfs_commit_inode_delayed_inode+0x5f/0x120

  but task is already holding lock:
  ffffffffabe61b40 (fs_reclaim){+.+.}-{0:0}, at: balance_pgdat+0x4aa/0x7a0

  which lock already depends on the new lock.

  the existing dependency chain (in reverse order) is:

  -> #1 (fs_reclaim){+.+.}-{0:0}:
	 fs_reclaim_acquire+0xa5/0xe0
	 kmem_cache_alloc+0x31/0x2c0
	 alloc_extent_state+0x1d/0xd0
	 __clear_extent_bit+0x2e0/0x4f0
	 try_release_extent_mapping+0x216/0x280
	 btrfs_release_folio+0x2e/0x90
	 invalidate_inode_pages2_range+0x397/0x470
	 btrfs_cleanup_dirty_bgs+0x9e/0x210
	 btrfs_cleanup_one_transaction+0x22/0x760
	 btrfs_commit_transaction+0x3b7/0x13a0
	 create_subvol+0x59b/0x970
	 btrfs_mksubvol+0x435/0x4f0
	 __btrfs_ioctl_snap_create+0x11e/0x1b0
	 btrfs_ioctl_snap_create_v2+0xbf/0x140
	 btrfs_ioctl+0xa45/0x28f0
	 __x64_sys_ioctl+0x88/0xc0
	 do_syscall_64+0x38/0x90
	 entry_SYSCALL_64_after_hwframe+0x72/0xdc

  -> #0 (sb_internal#2){++++}-{0:0}:
	 __lock_acquire+0x1435/0x21a0
	 lock_acquire+0xc2/0x2b0
	 start_transaction+0x401/0x730
	 btrfs_commit_inode_delayed_inode+0x5f/0x120
	 btrfs_evict_inode+0x292/0x3d0
	 evict+0xcc/0x1d0
	 inode_lru_isolate+0x14d/0x1e0
	 __list_lru_walk_one+0xbe/0x1c0
	 list_lru_walk_one+0x58/0x80
	 prune_icache_sb+0x39/0x60
	 super_cache_scan+0x161/0x1f0
	 do_shrink_slab+0x163/0x340
	 shrink_slab+0x1d3/0x290
	 shrink_node+0x300/0x720
	 balance_pgdat+0x35c/0x7a0
	 kswapd+0x205/0x410
	 kthread+0xf0/0x120
	 ret_from_fork+0x29/0x50

  other info that might help us debug this:

   Possible unsafe locking scenario:

	 CPU0                    CPU1
	 ----                    ----
    lock(fs_reclaim);
				 lock(sb_internal#2);
				 lock(fs_reclaim);
    lock(sb_internal#2);

   *** DEADLOCK ***

  3 locks held by kswapd0/46:
   #0: ffffffffabe61b40 (fs_reclaim){+.+.}-{0:0}, at: balance_pgdat+0x4aa/0x7a0
   #1: ffffffffabe50270 (shrinker_rwsem){++++}-{3:3}, at: shrink_slab+0x113/0x290
   #2: ffff8c6543abd0e0 (&type->s_umount_key#44){++++}-{3:3}, at: super_cache_scan+0x38/0x1f0

  stack backtrace:
  CPU: 0 PID: 46 Comm: kswapd0 Not tainted 6.3.0-rc7+ #1167
  Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS 1.13.0-2.fc32 04/01/2014
  Call Trace:
   
   dump_stack_lvl+0x58/0x90
   check_noncircular+0xd6/0x100
   ? save_trace+0x3f/0x310
   ? add_lock_to_list+0x97/0x120
   __lock_acquire+0x1435/0x21a0
   lock_acquire+0xc2/0x2b0
   ? btrfs_commit_inode_delayed_inode+0x5f/0x120
   start_transaction+0x401/0x730
   ? btrfs_commit_inode_delayed_inode+0x5f/0x120
   btrfs_commit_inode_delayed_inode+0x5f/0x120
   btrfs_evict_inode+0x292/0x3d0
   ? lock_release+0x134/0x270
   ? __pfx_wake_bit_function+0x10/0x10
   evict+0xcc/0x1d0
   inode_lru_isolate+0x14d/0x1e0
   __list_lru_walk_one+0xbe/0x1c0
   ? __pfx_inode_lru_isolate+0x10/0x10
   ? __pfx_inode_lru_isolate+0x10/0x10
   list_lru_walk_one+0x58/0x80
   prune_icache_sb+0x39/0x60
   super_cache_scan+0x161/0x1f0
   do_shrink_slab+0x163/0x340
   shrink_slab+0x1d3/0x290
   shrink_node+0x300/0x720
   balance_pgdat+0x35c/0x7a0
   kswapd+0x205/0x410
   ? __pfx_autoremove_wake_function+0x10/0x10
   ? __pfx_kswapd+0x10/0x10
   kthread+0xf0/0x120
   ? __pfx_kthread+0x10/0x10
   ret_from_fork+0x29/0x50
   

This happens because when we abort the transaction in the transaction
commit path we call invalidate_inode_pages2_range on our block group
cache inodes (if we have space cache v1) and any delalloc inodes we may
have.  The plain invalidate_inode_pages2_range() call passes through
GFP_KERNEL, which makes sense in most cases, but not here.  Wrap these
two invalidate callees with memalloc_nofs_save/memalloc_nofs_restore to
make sure we don't end up with the fs reclaim dependency under the
transaction dependency.

CC: stable@vger.kernel.org # 4.14+
Signed-off-by: Josef Bacik 
Reviewed-by: David Sterba 
Signed-off-by: David Sterba 
Signed-off-by: Greg Kroah-Hartman

nilfs2: fix use-after-free bug of nilfs_root in nilfs_evict_inode()

2023-05-30T11:42:11+00:00

commit 9b5a04ac3ad9898c4745cba46ea26de74ba56a8e upstream.

During unmount process of nilfs2, nothing holds nilfs_root structure after
nilfs2 detaches its writer in nilfs_detach_log_writer().  However, since
nilfs_evict_inode() uses nilfs_root for some cleanup operations, it may
cause use-after-free read if inodes are left in "garbage_list" and
released by nilfs_dispose_list() at the end of nilfs_detach_log_writer().

Fix this issue by modifying nilfs_evict_inode() to only clear inode
without additional metadata changes that use nilfs_root if the file system
is degraded to read-only or the writer is detached.

Link: https://lkml.kernel.org/r/20230509152956.8313-1-konishi.ryusuke@gmail.com
Signed-off-by: Ryusuke Konishi 
Reported-by: syzbot+78d4495558999f55d1da@syzkaller.appspotmail.com
Closes: https://lkml.kernel.org/r/00000000000099e5ac05fb1c3b85@google.com
Tested-by: Ryusuke Konishi 
Cc: 
Signed-off-by: Andrew Morton 
Signed-off-by: Greg Kroah-Hartman

ceph: force updating the msg pointer in non-split case

2023-05-30T11:42:11+00:00

commit 4cafd0400bcb6187c0d4ab4d4b0229a89ac4f8c2 upstream.

When the MClientSnap reqeust's op is not CEPH_SNAP_OP_SPLIT the
request may still contain a list of 'split_realms', and we need
to skip it anyway. Or it will be parsed as a corrupt snaptrace.

Cc: stable@vger.kernel.org
Link: https://tracker.ceph.com/issues/61200
Reported-by: Frank Schilder 
Signed-off-by: Xiubo Li 
Reviewed-by: Ilya Dryomov 
Signed-off-by: Ilya Dryomov 
Signed-off-by: Greg Kroah-Hartman

statfs: enforce statfs[64] structure initialization

2023-05-30T11:42:11+00:00

commit ed40866ec7d328b3dfb70db7e2011640a16202c3 upstream.

s390's struct statfs and struct statfs64 contain padding, which
field-by-field copying does not set. Initialize the respective structs
with zeros before filling them and copying them to userspace, like it's
already done for the compat versions of these structs.

Found by KMSAN.

[agordeev@linux.ibm.com: fixed typo in patch description]
Acked-by: Heiko Carstens 
Cc: stable@vger.kernel.org # v4.14+
Signed-off-by: Ilya Leoshkevich 
Reviewed-by: Andrew Morton 
Link: https://lore.kernel.org/r/20230504144021.808932-2-iii@linux.ibm.com
Signed-off-by: Alexander Gordeev 
Signed-off-by: Greg Kroah-Hartman