linux-stable.git/fs, branch v4.14.166

ocfs2: call journal flush to mark journal as empty after journal recovery when mount

2020-01-17T18:45:55+00:00

[ Upstream commit 397eac17f86f404f5ba31d8c3e39ec3124b39fd3 ]

If journal is dirty when mount, it will be replayed but jbd2 sb log tail
cannot be updated to mark a new start because journal->j_flag has
already been set with JBD2_ABORT first in journal_init_common.

When a new transaction is committed, it will be recored in block 1
first(journal->j_tail is set to 1 in journal_reset).  If emergency
restart happens again before journal super block is updated
unfortunately, the new recorded trans will not be replayed in the next
mount.

The following steps describe this procedure in detail.
1. mount and touch some files
2. these transactions are committed to journal area but not checkpointed
3. emergency restart
4. mount again and its journals are replayed
5. journal super block's first s_start is 1, but its s_seq is not updated
6. touch a new file and its trans is committed but not checkpointed
7. emergency restart again
8. mount and journal is dirty, but trans committed in 6 will not be
replayed.

This exception happens easily when this lun is used by only one node.
If it is used by multi-nodes, other node will replay its journal and its
journal super block will be updated after recovery like what this patch
does.

ocfs2_recover_node->ocfs2_replay_journal.

The following jbd2 journal can be generated by touching a new file after
journal is replayed, and seq 15 is the first valid commit, but first seq
is 13 in journal super block.

logdump:
  Block 0: Journal Superblock
  Seq: 0   Type: 4 (JBD2_SUPERBLOCK_V2)
  Blocksize: 4096   Total Blocks: 32768   First Block: 1
  First Commit ID: 13   Start Log Blknum: 1
  Error: 0
  Feature Compat: 0
  Feature Incompat: 2 block64
  Feature RO compat: 0
  Journal UUID: 4ED3822C54294467A4F8E87D2BA4BC36
  FS Share Cnt: 1   Dynamic Superblk Blknum: 0
  Per Txn Block Limit    Journal: 0    Data: 0

  Block 1: Journal Commit Block
  Seq: 14   Type: 2 (JBD2_COMMIT_BLOCK)

  Block 2: Journal Descriptor
  Seq: 15   Type: 1 (JBD2_DESCRIPTOR_BLOCK)
  No. Blocknum        Flags
   0. 587             none
  UUID: 00000000000000000000000000000000
   1. 8257792         JBD2_FLAG_SAME_UUID
   2. 619             JBD2_FLAG_SAME_UUID
   3. 24772864        JBD2_FLAG_SAME_UUID
   4. 8257802         JBD2_FLAG_SAME_UUID
   5. 513             JBD2_FLAG_SAME_UUID JBD2_FLAG_LAST_TAG
  ...
  Block 7: Inode
  Inode: 8257802   Mode: 0640   Generation: 57157641 (0x3682809)
  FS Generation: 2839773110 (0xa9437fb6)
  CRC32: 00000000   ECC: 0000
  Type: Regular   Attr: 0x0   Flags: Valid
  Dynamic Features: (0x1) InlineData
  User: 0 (root)   Group: 0 (root)   Size: 7
  Links: 1   Clusters: 0
  ctime: 0x5de5d870 0x11104c61 -- Tue Dec  3 11:37:20.286280801 2019
  atime: 0x5de5d870 0x113181a1 -- Tue Dec  3 11:37:20.288457121 2019
  mtime: 0x5de5d870 0x11104c61 -- Tue Dec  3 11:37:20.286280801 2019
  dtime: 0x0 -- Thu Jan  1 08:00:00 1970
  ...
  Block 9: Journal Commit Block
  Seq: 15   Type: 2 (JBD2_COMMIT_BLOCK)

The following is journal recovery log when recovering the upper jbd2
journal when mount again.

syslog:
  ocfs2: File system on device (252,1) was not unmounted cleanly, recovering it.
  fs/jbd2/recovery.c:(do_one_pass, 449): Starting recovery pass 0
  fs/jbd2/recovery.c:(do_one_pass, 449): Starting recovery pass 1
  fs/jbd2/recovery.c:(do_one_pass, 449): Starting recovery pass 2
  fs/jbd2/recovery.c:(jbd2_journal_recover, 278): JBD2: recovery, exit status 0, recovered transactions 13 to 13

Due to first commit seq 13 recorded in journal super is not consistent
with the value recorded in block 1(seq is 14), journal recovery will be
terminated before seq 15 even though it is an unbroken commit, inode
8257802 is a new file and it will be lost.

Link: http://lkml.kernel.org/r/20191217020140.2197-1-li.kai4@h3c.com
Signed-off-by: Kai Li 
Reviewed-by: Joseph Qi 
Reviewed-by: Changwei Ge 
Cc: Mark Fasheh 
Cc: Joel Becker 
Cc: Junxiao Bi 
Cc: Gang He 
Cc: Jun Piao 
Signed-off-by: Andrew Morton 
Signed-off-by: Linus Torvalds 
Signed-off-by: Sasha Levin

f2fs: fix potential overflow

2020-01-17T18:45:52+00:00

commit 1f0d5c911b64165c9754139a26c8c2fad352c132 upstream.

We expect 64-bit calculation result from below statement, however
in 32-bit machine, looped left shift operation on pgoff_t type
variable may cause overflow issue, fix it by forcing type cast.

page->index << PAGE_SHIFT;

Fixes: 26de9b117130 ("f2fs: avoid unnecessary updating inode during fsync")
Fixes: 0a2aa8fbb969 ("f2fs: refactor __exchange_data_block for speed up")
Signed-off-by: Chao Yu 
Signed-off-by: Jaegeuk Kim 
Signed-off-by: Greg Kroah-Hartman

NFSv4.x: Drop the slot if nfs4_delegreturn_prepare waits for layoutreturn

2020-01-17T18:45:48+00:00

commit 5326de9e94bedcf7366e7e7625d4deb8c1f1ca8a upstream.

If nfs4_delegreturn_prepare needs to wait for a layoutreturn to complete
then make sure we drop the sequence slot if we hold it.

Fixes: 1c5bd76d17cc ("pNFS: Enable layoutreturn operation for return-on-close")
Signed-off-by: Trond Myklebust 
Signed-off-by: Greg Kroah-Hartman

btrfs: simplify inode locking for RWF_NOWAIT

2020-01-17T18:45:46+00:00

commit 9cf35f673583ccc9f3e2507498b3079d56614ad3 upstream.

This is similar to 942491c9e6d6 ("xfs: fix AIM7 regression"). Apparently
our current rwsem code doesn't like doing the trylock, then lock for
real scheme. This causes extra contention on the lock and can be
measured eg. by AIM7 benchmark.  So change our read/write methods to
just do the trylock for the RWF_NOWAIT case.

Fixes: edf064e7c6fe ("btrfs: nowait aio support")
Signed-off-by: Goldwyn Rodrigues 
Reviewed-by: David Sterba 
[ update changelog ]
Signed-off-by: David Sterba 
Signed-off-by: Greg Kroah-Hartman

cifs: Adjust indentation in smb2_open_file

2020-01-17T18:45:45+00:00

commit 7935799e041ae10d380d04ea23868240f082bd11 upstream.

Clang warns:

../fs/cifs/smb2file.c:70:3: warning: misleading indentation; statement
is not part of the previous 'if' [-Wmisleading-indentation]
         if (oparms->tcon->use_resilient) {
         ^
../fs/cifs/smb2file.c:66:2: note: previous statement is here
        if (rc)
        ^
1 warning generated.

This warning occurs because there is a space after the tab on this line.
Remove it so that the indentation is consistent with the Linux kernel
coding style and clang no longer warns.

Fixes: 592fafe644bf ("Add resilienthandles mount parm")
Link: https://github.com/ClangBuiltLinux/linux/issues/826
Signed-off-by: Nathan Chancellor 
Signed-off-by: Steve French 
Signed-off-by: Greg Kroah-Hartman

cifs: Fix lease buffer length error

2020-01-17T18:45:42+00:00

commit b57a55e2200ede754e4dc9cce4ba9402544b9365 upstream.

There is a KASAN slab-out-of-bounds:
BUG: KASAN: slab-out-of-bounds in _copy_from_iter_full+0x783/0xaa0
Read of size 80 at addr ffff88810c35e180 by task mount.cifs/539

CPU: 1 PID: 539 Comm: mount.cifs Not tainted 4.19 #10
Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS
            rel-1.12.0-0-ga698c8995f-prebuilt.qemu.org 04/01/2014
Call Trace:
 dump_stack+0xdd/0x12a
 print_address_description+0xa7/0x540
 kasan_report+0x1ff/0x550
 check_memory_region+0x2f1/0x310
 memcpy+0x2f/0x80
 _copy_from_iter_full+0x783/0xaa0
 tcp_sendmsg_locked+0x1840/0x4140
 tcp_sendmsg+0x37/0x60
 inet_sendmsg+0x18c/0x490
 sock_sendmsg+0xae/0x130
 smb_send_kvec+0x29c/0x520
 __smb_send_rqst+0x3ef/0xc60
 smb_send_rqst+0x25a/0x2e0
 compound_send_recv+0x9e8/0x2af0
 cifs_send_recv+0x24/0x30
 SMB2_open+0x35e/0x1620
 open_shroot+0x27b/0x490
 smb2_open_op_close+0x4e1/0x590
 smb2_query_path_info+0x2ac/0x650
 cifs_get_inode_info+0x1058/0x28f0
 cifs_root_iget+0x3bb/0xf80
 cifs_smb3_do_mount+0xe00/0x14c0
 cifs_do_mount+0x15/0x20
 mount_fs+0x5e/0x290
 vfs_kern_mount+0x88/0x460
 do_mount+0x398/0x31e0
 ksys_mount+0xc6/0x150
 __x64_sys_mount+0xea/0x190
 do_syscall_64+0x122/0x590
 entry_SYSCALL_64_after_hwframe+0x44/0xa9

It can be reproduced by the following step:
  1. samba configured with: server max protocol = SMB2_10
  2. mount -o vers=default

When parse the mount version parameter, the 'ops' and 'vals'
was setted to smb30,  if negotiate result is smb21, just
update the 'ops' to smb21, but the 'vals' is still smb30.
When add lease context, the iov_base is allocated with smb21
ops, but the iov_len is initiallited with the smb30. Because
the iov_len is longer than iov_base, when send the message,
copy array out of bounds.

we need to keep the 'ops' and 'vals' consistent.

Fixes: 9764c02fcbad ("SMB3: Add support for multidialect negotiate (SMB2.1 and later)")
Fixes: d5c7076b772a ("smb3: add smb3.1.1 to default dialect list")

Signed-off-by: ZhangXiaoxu 
Signed-off-by: Steve French 
Reviewed-by: Pavel Shilovsky 
[bwh: Backported to 4.14: We never switch to SMB3.1.1 here]
Signed-off-by: Ben Hutchings 
Signed-off-by: Greg Kroah-Hartman

chardev: Avoid potential use-after-free in 'chrdev_open()'

2020-01-14T19:05:39+00:00

commit 68faa679b8be1a74e6663c21c3a9d25d32f1c079 upstream.

'chrdev_open()' calls 'cdev_get()' to obtain a reference to the
'struct cdev *' stashed in the 'i_cdev' field of the target inode
structure. If the pointer is NULL, then it is initialised lazily by
looking up the kobject in the 'cdev_map' and so the whole procedure is
protected by the 'cdev_lock' spinlock to serialise initialisation of
the shared pointer.

Unfortunately, it is possible for the initialising thread to fail *after*
installing the new pointer, for example if the subsequent '->open()' call
on the file fails. In this case, 'cdev_put()' is called, the reference
count on the kobject is dropped and, if nobody else has taken a reference,
the release function is called which finally clears 'inode->i_cdev' from
'cdev_purge()' before potentially freeing the object. The problem here
is that a racing thread can happily take the 'cdev_lock' and see the
non-NULL pointer in the inode, which can result in a refcount increment
from zero and a warning:

  |  ------------[ cut here ]------------
  |  refcount_t: addition on 0; use-after-free.
  |  WARNING: CPU: 2 PID: 6385 at lib/refcount.c:25 refcount_warn_saturate+0x6d/0xf0
  |  Modules linked in:
  |  CPU: 2 PID: 6385 Comm: repro Not tainted 5.5.0-rc2+ #22
  |  Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.12.0-1 04/01/2014
  |  RIP: 0010:refcount_warn_saturate+0x6d/0xf0
  |  Code: 05 55 9a 15 01 01 e8 9d aa c8 ff 0f 0b c3 80 3d 45 9a 15 01 00 75 ce 48 c7 c7 00 9c 62 b3 c6 08
  |  RSP: 0018:ffffb524c1b9bc70 EFLAGS: 00010282
  |  RAX: 0000000000000000 RBX: ffff9e9da1f71390 RCX: 0000000000000000
  |  RDX: ffff9e9dbbd27618 RSI: ffff9e9dbbd18798 RDI: ffff9e9dbbd18798
  |  RBP: 0000000000000000 R08: 000000000000095f R09: 0000000000000039
  |  R10: 0000000000000000 R11: ffffb524c1b9bb20 R12: ffff9e9da1e8c700
  |  R13: ffffffffb25ee8b0 R14: 0000000000000000 R15: ffff9e9da1e8c700
  |  FS:  00007f3b87d26700(0000) GS:ffff9e9dbbd00000(0000) knlGS:0000000000000000
  |  CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
  |  CR2: 00007fc16909c000 CR3: 000000012df9c000 CR4: 00000000000006e0
  |  DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
  |  DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400
  |  Call Trace:
  |   kobject_get+0x5c/0x60
  |   cdev_get+0x2b/0x60
  |   chrdev_open+0x55/0x220
  |   ? cdev_put.part.3+0x20/0x20
  |   do_dentry_open+0x13a/0x390
  |   path_openat+0x2c8/0x1470
  |   do_filp_open+0x93/0x100
  |   ? selinux_file_ioctl+0x17f/0x220
  |   do_sys_open+0x186/0x220
  |   do_syscall_64+0x48/0x150
  |   entry_SYSCALL_64_after_hwframe+0x44/0xa9
  |  RIP: 0033:0x7f3b87efcd0e
  |  Code: 89 54 24 08 e8 a3 f4 ff ff 8b 74 24 0c 48 8b 3c 24 41 89 c0 44 8b 54 24 08 b8 01 01 00 00 89 f4
  |  RSP: 002b:00007f3b87d259f0 EFLAGS: 00000293 ORIG_RAX: 0000000000000101
  |  RAX: ffffffffffffffda RBX: 0000000000000000 RCX: 00007f3b87efcd0e
  |  RDX: 0000000000000000 RSI: 00007f3b87d25a80 RDI: 00000000ffffff9c
  |  RBP: 00007f3b87d25e90 R08: 0000000000000000 R09: 0000000000000000
  |  R10: 0000000000000000 R11: 0000000000000293 R12: 00007ffe188f504e
  |  R13: 00007ffe188f504f R14: 00007f3b87d26700 R15: 0000000000000000
  |  ---[ end trace 24f53ca58db8180a ]---

Since 'cdev_get()' can already fail to obtain a reference, simply move
it over to use 'kobject_get_unless_zero()' instead of 'kobject_get()',
which will cause the racing thread to return -ENXIO if the initialising
thread fails unexpectedly.

Cc: Hillf Danton 
Cc: Andrew Morton 
Cc: Al Viro 
Reported-by: syzbot+82defefbbd8527e1c2cb@syzkaller.appspotmail.com
Signed-off-by: Will Deacon 
Cc: stable 
Link: https://lore.kernel.org/r/20191219120203.32691-1-will@kernel.org
Signed-off-by: Greg Kroah-Hartman

fs: avoid softlockups in s_inodes iterators

2020-01-12T11:11:59+00:00

[ Upstream commit 04646aebd30b99f2cfa0182435a2ec252fcb16d0 ]

Anything that walks all inodes on sb->s_inodes list without rescheduling
risks softlockups.

Previous efforts were made in 2 functions, see:

c27d82f fs/drop_caches.c: avoid softlockups in drop_pagecache_sb()
ac05fbb inode: don't softlockup when evicting inodes

but there hasn't been an audit of all walkers, so do that now.  This
also consistently moves the cond_resched() calls to the bottom of each
loop in cases where it already exists.

One loop remains: remove_dquot_ref(), because I'm not quite sure how
to deal with that one w/o taking the i_lock.

Signed-off-by: Eric Sandeen 
Reviewed-by: Jan Kara 
Signed-off-by: Al Viro 
Signed-off-by: Sasha Levin

fix compat handling of FICLONERANGE, FIDEDUPERANGE and FS_IOC_FIEMAP

2020-01-09T09:17:58+00:00

commit 6b2daec19094a90435abe67d16fb43b1a5527254 upstream.

Unlike FICLONE, all of those take a pointer argument; they do need
compat_ptr() applied to arg.

Fixes: d79bdd52d8be ("vfs: wire up compat ioctl for CLONE/CLONE_RANGE")
Fixes: 54dbc1517237 ("vfs: hoist the btrfs deduplication ioctl to the vfs")
Fixes: ceac204e1da9 ("fs: make fiemap work from compat_ioctl")
Signed-off-by: Al Viro 
Signed-off-by: Arnd Bergmann 
Signed-off-by: Greg Kroah-Hartman

xfs: don't check for AG deadlock for realtime files in bunmapi

2020-01-09T09:17:57+00:00

commit 69ffe5960df16938bccfe1b65382af0b3de51265 upstream.

Commit 5b094d6dac04 ("xfs: fix multi-AG deadlock in xfs_bunmapi") added
a check in __xfs_bunmapi() to stop early if we would touch multiple AGs
in the wrong order. However, this check isn't applicable for realtime
files. In most cases, it just makes us do unnecessary commits. However,
without the fix from the previous commit ("xfs: fix realtime file data
space leak"), if the last and second-to-last extents also happen to have
different "AG numbers", then the break actually causes __xfs_bunmapi()
to return without making any progress, which sends
xfs_itruncate_extents_flags() into an infinite loop.

Fixes: 5b094d6dac04 ("xfs: fix multi-AG deadlock in xfs_bunmapi")
Signed-off-by: Omar Sandoval 
Reviewed-by: Darrick J. Wong 
Signed-off-by: Darrick J. Wong 
Signed-off-by: Greg Kroah-Hartman