linux-stable.git/fs, branch v3.4.81

nfs: tear down caches in nfs_init_writepagecache when allocation fails

2014-02-20T18:45:33+00:00

commit 3dd4765fce04c0b4af1e0bc4c0b10f906f95fabc upstream.

...and ensure that we tear down the nfs_commit_data cache too when
unloading the module.

Cc: Bryan Schumaker 
Signed-off-by: Jeff Layton 
Signed-off-by: Trond Myklebust 
[bwh: Backported to 3.2: drop the nfs_cdata_cachep cleanup; it doesn't exist]
Signed-off-by: Ben Hutchings 
Cc: Li Zefan 
Signed-off-by: Greg Kroah-Hartman

ext4: protect group inode free counting with group lock

2014-02-20T18:45:32+00:00

commit 6f2e9f0e7d795214b9cf5a47724a273b705fd113 upstream.

Now when we set the group inode free count, we don't have a proper
group lock so that multiple threads may decrease the inode free
count at the same time. And e2fsck will complain something like:

Free inodes count wrong for group #1 (1, counted=0).
Fix? no

Free inodes count wrong for group #2 (3, counted=0).
Fix? no

Directories count wrong for group #2 (780, counted=779).
Fix? no

Free inodes count wrong for group #3 (2272, counted=2273).
Fix? no

So this patch try to protect it with the ext4_lock_group.

btw, it is found by xfstests test case 269 and the volume is
mkfsed with the parameter
"-O ^resize_inode,^uninit_bg,extent,meta_bg,flex_bg,ext_attr"
and I have run it 100 times and the error in e2fsck doesn't
show up again.

Signed-off-by: Tao Ma 
Signed-off-by: "Theodore Ts'o" 
Signed-off-by: Benjamin LaHaise 
Signed-off-by: Greg Kroah-Hartman

mm: __set_page_dirty uses spin_lock_irqsave instead of spin_lock_irq

2014-02-20T18:45:32+00:00

commit 227d53b397a32a7614667b3ecaf1d89902fb6c12 upstream.

To use spin_{un}lock_irq is dangerous if caller disabled interrupt.
During aio buffer migration, we have a possibility to see the following
call stack.

aio_migratepage  [disable interrupt]
  migrate_page_copy
    clear_page_dirty_for_io
      set_page_dirty
        __set_page_dirty_buffers
          __set_page_dirty
            spin_lock_irq

This mean, current aio migration is a deadlockable.  spin_lock_irqsave
is a safer alternative and we should use it.

Signed-off-by: KOSAKI Motohiro 
Reported-by: David Rientjes rientjes@google.com>
Signed-off-by: Andrew Morton 
Signed-off-by: Linus Torvalds 
Signed-off-by: Greg Kroah-Hartman

hpfs: deadlock and race in directory lseek()

2014-02-13T19:51:18+00:00

commit 31abdab9c11bb1694ecd1476a7edbe8e964d94ac upstream.

For one thing, there's an ABBA deadlock on hpfs fs-wide lock and i_mutex
in hpfs_dir_lseek() - there's a lot of methods that grab the former with
the caller already holding the latter, so it must take i_mutex first.

For another, locking the damn thing, carefully validating the offset,
then dropping locks and assigning the offset is obviously racy.

Moreover, we _must_ do hpfs_add_pos(), or the machinery in dnode.c
won't modify the sucker on B-tree surgeries.

Signed-off-by: Al Viro 
Cc: Mikulas Patocka 
Signed-off-by: Greg Kroah-Hartman

nfs4.1: properly handle ENOTSUP in SECINFO_NO_NAME

2014-02-13T19:51:13+00:00

commit 78b19bae0813bd6f921ca58490196abd101297bd upstream.

Don't check for -NFS4ERR_NOTSUPP, it's already been mapped to -ENOTSUPP
by nfs4_stat_to_errno.

This allows the client to mount v4.1 servers that don't support
SECINFO_NO_NAME by falling back to the "guess and check" method of
nfs4_find_root_sec.

Signed-off-by: Weston Andros Adamson 
Signed-off-by: Trond Myklebust 
Signed-off-by: Greg Kroah-Hartman

NFSv4: OPEN must handle the NFS4ERR_IO return code correctly

2014-02-13T19:51:12+00:00

commit c7848f69ec4a8c03732cde5c949bd2aa711a9f4b upstream.

decode_op_hdr() cannot distinguish between an XDR decoding error and
the perfectly valid errorcode NFS4ERR_IO. This is normally not a
problem, but for the particular case of OPEN, we need to be able
to increment the NFSv4 open sequence id when the server returns
a valid response.

Reported-by: J Bruce Fields 
Link: http://lkml.kernel.org/r/20131204210356.GA19452@fieldses.org
Signed-off-by: Trond Myklebust 
Signed-off-by: Greg Kroah-Hartman

ore: Fix wrong math in allocation of per device BIO

2014-02-13T19:51:11+00:00

commit aad560b7f63b495f48a7232fd086c5913a676e6f upstream.

At IO preparation we calculate the max pages at each device and
allocate a BIO per device of that size. The calculation was wrong
on some unaligned corner cases offset/length combination and would
make prepare return with -ENOMEM. This would be bad for pnfs-objects
that would in that case IO through MDS. And fatal for exofs were it
would fail writes with EIO.

Fix it by doing the proper math, that will work in all cases. (I
ran a test with all possible offset/length combinations this time
round).

Also when reading we do not need to allocate for the parity units
since we jump over them.

Also lower the max_io_length to take into account the parity pages
so not to allocate BIOs bigger than PAGE_SIZE

Signed-off-by: Boaz Harrosh 
Signed-off-by: Greg Kroah-Hartman

Btrfs: handle EAGAIN case properly in btrfs_drop_snapshot()

2014-02-06T19:05:48+00:00

commit 90515e7f5d7d24cbb2a4038a3f1b5cfa2921aa17 upstream.

We may return early in btrfs_drop_snapshot(), we shouldn't
call btrfs_std_err() for this case, fix it.

Signed-off-by: Wang Shilong 
Signed-off-by: Josef Bacik 
Signed-off-by: Chris Mason 
Signed-off-by: Greg Kroah-Hartman

nilfs2: fix segctor bug that causes file system corruption

2014-01-29T13:10:42+00:00

commit 70f2fe3a26248724d8a5019681a869abdaf3e89a upstream.

There is a bug in the function nilfs_segctor_collect, which results in
active data being written to a segment, that is marked as clean.  It is
possible, that this segment is selected for a later segment
construction, whereby the old data is overwritten.

The problem shows itself with the following kernel log message:

  nilfs_sufile_do_cancel_free: segment 6533 must be clean

Usually a few hours later the file system gets corrupted:

  NILFS: bad btree node (blocknr=8748107): level = 0, flags = 0x0, nchildren = 0
  NILFS error (device sdc1): nilfs_bmap_last_key: broken bmap (inode number=114660)

The issue can be reproduced with a file system that is nearly full and
with the cleaner running, while some IO intensive task is running.
Although it is quite hard to reproduce.

This is what happens:

 1. The cleaner starts the segment construction
 2. nilfs_segctor_collect is called
 3. sc_stage is on NILFS_ST_SUFILE and segments are freed
 4. sc_stage is on NILFS_ST_DAT current segment is full
 5. nilfs_segctor_extend_segments is called, which
    allocates a new segment
 6. The new segment is one of the segments freed in step 3
 7. nilfs_sufile_cancel_freev is called and produces an error message
 8. Loop around and the collection starts again
 9. sc_stage is on NILFS_ST_SUFILE and segments are freed
    including the newly allocated segment, which will contain active
    data and can be allocated at a later time
10. A few hours later another segment construction allocates the
    segment and causes file system corruption

This can be prevented by simply reordering the statements.  If
nilfs_sufile_cancel_freev is called before nilfs_segctor_extend_segments
the freed segments are marked as dirty and cannot be allocated any more.

Signed-off-by: Andreas Rohner 
Reviewed-by: Ryusuke Konishi 
Tested-by: Andreas Rohner 
Signed-off-by: Ryusuke Konishi 
Signed-off-by: Andrew Morton 
Signed-off-by: Linus Torvalds 
Signed-off-by: Greg Kroah-Hartman

jbd2: don't BUG but return ENOSPC if a handle runs out of space

2014-01-08T17:42:12+00:00

commit f6c07cad081ba222d63623d913aafba5586c1d2c upstream.

If a handle runs out of space, we currently stop the kernel with a BUG
in jbd2_journal_dirty_metadata().  This makes it hard to figure out
what might be going on.  So return an error of ENOSPC, so we can let
the file system layer figure out what is going on, to make it more
likely we can get useful debugging information).  This should make it
easier to debug problems such as the one which was reported by:

    https://bugzilla.kernel.org/show_bug.cgi?id=44731

The only two callers of this function are ext4_handle_dirty_metadata()
and ocfs2_journal_dirty().  The ocfs2 function will trigger a
BUG_ON(), which means there will be no change in behavior.  The ext4
function will call ext4_error_inode() which will print the useful
debugging information and then handle the situation using ext4's error
handling mechanisms (i.e., which might mean halting the kernel or
remounting the file system read-only).

Also, since both file systems already call WARN_ON(), drop the WARN_ON
from jbd2_journal_dirty_metadata() to avoid two stack traces from
being displayed.

Signed-off-by: "Theodore Ts'o" 
Cc: ocfs2-devel@oss.oracle.com
Acked-by: Joel Becker 
Signed-off-by: Greg Kroah-Hartman