linux-stable.git/fs, branch v3.4.62

SCSI: sg: Fix user memory corruption when SG_IO is interrupted by a signal

2013-09-08T04:58:16+00:00

commit 35dc248383bbab0a7203fca4d722875bc81ef091 upstream.

There is a nasty bug in the SCSI SG_IO ioctl that in some circumstances
leads to one process writing data into the address space of some other
random unrelated process if the ioctl is interrupted by a signal.
What happens is the following:

 - A process issues an SG_IO ioctl with direction DXFER_FROM_DEV (ie the
   underlying SCSI command will transfer data from the SCSI device to
   the buffer provided in the ioctl)

 - Before the command finishes, a signal is sent to the process waiting
   in the ioctl.  This will end up waking up the sg_ioctl() code:

		result = wait_event_interruptible(sfp->read_wait,
			(srp_done(sfp, srp) || sdp->detached));

   but neither srp_done() nor sdp->detached is true, so we end up just
   setting srp->orphan and returning to userspace:

		srp->orphan = 1;
		write_unlock_irq(&sfp->rq_list_lock);
		return result;	/* -ERESTARTSYS because signal hit process */

   At this point the original process is done with the ioctl and
   blithely goes ahead handling the signal, reissuing the ioctl, etc.

 - Eventually, the SCSI command issued by the first ioctl finishes and
   ends up in sg_rq_end_io().  At the end of that function, we run through:

	write_lock_irqsave(&sfp->rq_list_lock, iflags);
	if (unlikely(srp->orphan)) {
		if (sfp->keep_orphan)
			srp->sg_io_owned = 0;
		else
			done = 0;
	}
	srp->done = done;
	write_unlock_irqrestore(&sfp->rq_list_lock, iflags);

	if (likely(done)) {
		/* Now wake up any sg_read() that is waiting for this
		 * packet.
		 */
		wake_up_interruptible(&sfp->read_wait);
		kill_fasync(&sfp->async_qp, SIGPOLL, POLL_IN);
		kref_put(&sfp->f_ref, sg_remove_sfp);
	} else {
		INIT_WORK(&srp->ew.work, sg_rq_end_io_usercontext);
		schedule_work(&srp->ew.work);
	}

   Since srp->orphan *is* set, we set done to 0 (assuming the
   userspace app has not set keep_orphan via an SG_SET_KEEP_ORPHAN
   ioctl), and therefore we end up scheduling sg_rq_end_io_usercontext()
   to run in a workqueue.

 - In workqueue context we go through sg_rq_end_io_usercontext() ->
   sg_finish_rem_req() -> blk_rq_unmap_user() -> ... ->
   bio_uncopy_user() -> __bio_copy_iov() -> copy_to_user().

   The key point here is that we are doing copy_to_user() on a
   workqueue -- that is, we're on a kernel thread with current->mm
   equal to whatever random previous user process was scheduled before
   this kernel thread.  So we end up copying whatever data the SCSI
   command returned to the virtual address of the buffer passed into
   the original ioctl, but it's quite likely we do this copying into a
   different address space!

As suggested by James Bottomley ,
add a check for current->mm (which is NULL if we're on a kernel thread
without a real userspace address space) in bio_uncopy_user(), and skip
the copy if we're on a kernel thread.

There's no reason that I can think of for any caller of bio_uncopy_user()
to want to do copying on a kernel thread with a random active userspace
address space.

Huge thanks to Costa Sapuntzakis  for the
original pointer to this bug in the sg code.

Signed-off-by: Roland Dreier 
Tested-by: David Milburn 
Cc: Jens Axboe 
Signed-off-by: James Bottomley 
[lizf: backported to 3.4:
 - Use __bio_for_each_segment() instead of bio_for_each_segment_all()]
Signed-off-by: Li Zefan 
Signed-off-by: Greg Kroah-Hartman

jfs: fix readdir cookie incompatibility with NFSv4

2013-09-08T04:58:13+00:00

commit 44512449c0ab368889dd13ae0031fba74ee7e1d2 upstream.

NFSv4 reserves readdir cookie values 0-2 for special entries (. and ..),
but jfs allows a value of 2 for a non-special entry. This incompatibility
can result in the nfs client reporting a readdir loop.

This patch doesn't change the value stored internally, but adds one to
the value exposed to the iterate method.

Signed-off-by: Dave Kleikamp 
[bwh: Backported to 3.2:
 - Adjust context
 - s/ctx->pos/filp->f_pos/]
Tested-by: Christian Kujau 
Signed-off-by: Ben Hutchings 
Signed-off-by: Greg Kroah-Hartman

nilfs2: fix issue with counting number of bio requests for BIO_EOPNOTSUPP error detection

2013-08-29T16:50:13+00:00

commit 4bf93b50fd04118ac7f33a3c2b8a0a1f9fa80bc9 upstream.

Fix the issue with improper counting number of flying bio requests for
BIO_EOPNOTSUPP error detection case.

The sb_nbio must be incremented exactly the same number of times as
complete() function was called (or will be called) because
nilfs_segbuf_wait() will call wail_for_completion() for the number of
times set to sb_nbio:

  do {
      wait_for_completion(&segbuf->sb_bio_event);
  } while (--segbuf->sb_nbio > 0);

Two functions complete() and wait_for_completion() must be called the
same number of times for the same sb_bio_event.  Otherwise,
wait_for_completion() will hang or leak.

Signed-off-by: Vyacheslav Dubeyko 
Cc: Dan Carpenter 
Acked-by: Ryusuke Konishi 
Tested-by: Ryusuke Konishi 
Signed-off-by: Andrew Morton 
Signed-off-by: Linus Torvalds 
Signed-off-by: Greg Kroah-Hartman

nilfs2: remove double bio_put() in nilfs_end_bio_write() for BIO_EOPNOTSUPP error

2013-08-29T16:50:12+00:00

commit 2df37a19c686c2d7c4e9b4ce1505b5141e3e5552 upstream.

Remove double call of bio_put() in nilfs_end_bio_write() for the case of
BIO_EOPNOTSUPP error detection.  The issue was found by Dan Carpenter
and he suggests first version of the fix too.

Signed-off-by: Vyacheslav Dubeyko 
Reported-by: Dan Carpenter 
Acked-by: Ryusuke Konishi 
Tested-by: Ryusuke Konishi 
Signed-off-by: Andrew Morton 
Signed-off-by: Linus Torvalds 
Signed-off-by: Greg Kroah-Hartman

jbd2: Fix use after free after error in jbd2_journal_dirty_metadata()

2013-08-20T15:26:29+00:00

commit 91aa11fae1cf8c2fd67be0609692ea9741cdcc43 upstream.

When jbd2_journal_dirty_metadata() returns error,
__ext4_handle_dirty_metadata() stops the handle. However callers of this
function do not count with that fact and still happily used now freed
handle. This use after free can result in various issues but very likely
we oops soon.

The motivation of adding __ext4_journal_stop() into
__ext4_handle_dirty_metadata() in commit 9ea7a0df seems to be only to
improve error reporting. So replace __ext4_journal_stop() with
ext4_journal_abort_handle() which was there before that commit and add
WARN_ON_ONCE() to dump stack to provide useful information.

Reported-by: Sage Weil 
Signed-off-by: Jan Kara 
Signed-off-by: "Theodore Ts'o" 
Signed-off-by: Greg Kroah-Hartman

fs/proc/task_mmu.c: fix buffer overflow in add_page_map()

2013-08-20T15:26:27+00:00

commit 8c8296223f3abb142be8fc31711b18a704c0e7d8 upstream.

Recently we met quite a lot of random kernel panic issues after enabling
CONFIG_PROC_PAGE_MONITOR.  After debuggind we found this has something
to do with following bug in pagemap:

In struct pagemapread:

  struct pagemapread {
      int pos, len;
      pagemap_entry_t *buffer;
      bool v2;
  };

pos is number of PM_ENTRY_BYTES in buffer, but len is the size of
buffer, it is a mistake to compare pos and len in add_page_map() for
checking buffer is full or not, and this can lead to buffer overflow and
random kernel panic issue.

Correct len to be total number of PM_ENTRY_BYTES in buffer.

[akpm@linux-foundation.org: document pagemapread.pos and .len units, fix PM_ENTRY_BYTES definition]
Signed-off-by: Yonghua Zheng 
Signed-off-by: Andrew Morton 
Signed-off-by: Linus Torvalds 
Signed-off-by: Greg Kroah-Hartman

vfs: d_obtain_alias() needs to use "/" as default name.

2013-08-15T05:57:08+00:00

commit b911a6bdeef5848c468597d040e3407e0aee04ce upstream.

NFS appears to use d_obtain_alias() to create the root dentry rather than
d_make_root.  This can cause 'prepend_path()' to complain that the root
has a weird name if an NFS filesystem is lazily unmounted.  e.g.  if
"/mnt" is an NFS mount then

 { cd /mnt; umount -l /mnt ; ls -l /proc/self/cwd; }

will cause a WARN message like
   WARNING: at /home/git/linux/fs/dcache.c:2624 prepend_path+0x1d7/0x1e0()
   ...
   Root dentry has weird name <>

to appear in kernel logs.

So change d_obtain_alias() to use "/" rather than "" as the anonymous
name.

Signed-off-by: NeilBrown 
Cc: Trond Myklebust 
Cc: Al Viro 
Signed-off-by: Andrew Morton 
Signed-off-by: Al Viro 
[bwh: Backported to 3.2: use named initialisers instead of QSTR_INIT()]
Signed-off-by: Ben Hutchings 
Signed-off-by: Greg Kroah-Hartman

debugfs: debugfs_remove_recursive() must not rely on list_empty(d_subdirs)

2013-08-15T05:57:07+00:00

commit 776164c1faac4966ab14418bb0922e1820da1d19 upstream.

debugfs_remove_recursive() is wrong,

1. it wrongly assumes that !list_empty(d_subdirs) means that this
   dir should be removed.

   This is not that bad by itself, but:

2. if d_subdirs does not becomes empty after __debugfs_remove()
   it gives up and silently fails, it doesn't even try to remove
   other entries.

   However ->d_subdirs can be non-empty because it still has the
   already deleted !debugfs_positive() entries.

3. simple_release_fs() is called even if __debugfs_remove() fails.

Suppose we have

	dir1/
		dir2/
			file2
		file1

and someone opens dir1/dir2/file2.

Now, debugfs_remove_recursive(dir1/dir2) succeeds, and dir1/dir2 goes
away.

But debugfs_remove_recursive(dir1) silently fails and doesn't remove
this directory. Because it tries to delete (the already deleted)
dir1/dir2/file2 again and then fails due to "Avoid infinite loop"
logic.

Test-case:

	#!/bin/sh

	cd /sys/kernel/debug/tracing
	echo 'p:probe/sigprocmask sigprocmask' >> kprobe_events
	sleep 1000 < events/probe/sigprocmask/id &
	echo -n >| kprobe_events

	[ -d events/probe ] && echo "ERR!! failed to rm probe"

And after that it is not possible to create another probe entry.

With this patch debugfs_remove_recursive() skips !debugfs_positive()
files although this is not strictly needed. The most important change
is that it does not try to make ->d_subdirs empty, it simply scans
the whole list(s) recursively and removes as much as possible.

Link: http://lkml.kernel.org/r/20130726151256.GC19472@redhat.com

Acked-by: Greg Kroah-Hartman 
Signed-off-by: Oleg Nesterov 
Signed-off-by: Steven Rostedt 
Signed-off-by: Greg Kroah-Hartman

cifs: extend the buffer length enought for sprintf() using

2013-08-15T05:57:07+00:00

commit 057d6332b24a4497c55a761c83c823eed9e3f23b upstream.

For cifs_set_cifscreds() in "fs/cifs/connect.c", 'desc' buffer length
is 'CIFSCREDS_DESC_SIZE' (56 is less than 256), and 'ses->domainName'
length may be "255 + '\0'".

The related sprintf() may cause memory overflow, so need extend related
buffer enough to hold all things.

It is also necessary to be sure of 'ses->domainName' must be less than
256, and define the related macro instead of hard code number '256'.

Signed-off-by: Chen Gang 
Reviewed-by: Jeff Layton 
Reviewed-by: Shirish Pargaonkar 
Reviewed-by: Scott Lovenberg 
Signed-off-by: Steve French 
Signed-off-by: Greg Kroah-Hartman

ext4: fix mount/remount error messages for incompatible mount options

2013-08-15T05:57:07+00:00

commit 6ae6514b33f941d3386da0dfbe2942766eab1577 upstream.

Commit 5688978 ("ext4: improve handling of conflicting mount options")
introduced incorrect messages shown while choosing wrong mount options.

First of all, both cases of incorrect mount options,
"data=journal,delalloc" and "data=journal,dioread_nolock" result in
the same error message.

Secondly, the problem above isn't solved for remount option: the
mismatched parameter is simply ignored.  Moreover, ext4_msg states
that remount with options "data=journal,delalloc" succeeded, which is
not true.

To fix it up, I added a simple check after parse_options() call to
ensure that data=journal and delalloc/dioread_nolock parameters are
not present at the same time.

Signed-off-by: Piotr Sarna 
Acked-by: Bartlomiej Zolnierkiewicz 
Signed-off-by: Kyungmin Park 
Signed-off-by: "Theodore Ts'o" 
Signed-off-by: Greg Kroah-Hartman