linux-stable.git/fs, branch v3.2.81

get_rock_ridge_filename(): handle malformed NM entries

2016-06-15T20:28:14+00:00

commit 99d825822eade8d827a1817357cbf3f889a552d6 upstream.

Payloads of NM entries are not supposed to contain NUL.  When we run
into such, only the part prior to the first NUL goes into the
concatenation (i.e. the directory entry name being encoded by a bunch
of NM entries).  We do stop when the amount collected so far + the
claimed amount in the current NM entry exceed 254.  So far, so good,
but what we return as the total length is the sum of *claimed*
sizes, not the actual amount collected.  And that can grow pretty
large - not unlimited, since you'd need to put CE entries in
between to be able to get more than the maximum that could be
contained in one isofs directory entry / continuation chunk and
we are stop once we'd encountered 32 CEs, but you can get about 8Kb
easily.  And that's what will be passed to readdir callback as the
name length.  8Kb __copy_to_user() from a buffer allocated by
__get_free_page()

Signed-off-by: Al Viro 
Signed-off-by: Ben Hutchings

proc: prevent accessing /proc//environ until it's ready

2016-06-15T20:28:14+00:00

commit 8148a73c9901a8794a50f950083c00ccf97d43b3 upstream.

If /proc//environ gets read before the envp[] array is fully set up
in create_{aout,elf,elf_fdpic,flat}_tables(), we might end up trying to
read more bytes than are actually written, as env_start will already be
set but env_end will still be zero, making the range calculation
underflow, allowing to read beyond the end of what has been written.

Fix this as it is done for /proc//cmdline by testing env_end for
zero.  It is, apparently, intentionally set last in create_*_tables().

This bug was found by the PaX size_overflow plugin that detected the
arithmetic underflow of 'this_len = env_end - (env_start + src)' when
env_end is still zero.

The expected consequence is that userland trying to access
/proc//environ of a not yet fully set up process may get
inconsistent data as we're in the middle of copying in the environment
variables.

Fixes: https://forums.grsecurity.net/viewtopic.php?f=3&t=4363
Fixes: https://bugzilla.kernel.org/show_bug.cgi?id=116461
Signed-off-by: Mathias Krause 
Cc: Emese Revfy 
Cc: Pax Team 
Cc: Al Viro 
Cc: Mateusz Guzik 
Cc: Alexey Dobriyan 
Cc: Cyrill Gorcunov 
Cc: Jarod Wilson 
Signed-off-by: Andrew Morton 
Signed-off-by: Linus Torvalds 
[bwh: Backported to 3.2: adjust context]
Signed-off-by: Ben Hutchings

hugetlb: ensure hugepage access is denied if hugepages are not supported

2016-06-15T20:28:12+00:00

commit 457c1b27ed56ec472d202731b12417bff023594a upstream.

Currently, I am seeing the following when I `mount -t hugetlbfs /none
/dev/hugetlbfs`, and then simply do a `ls /dev/hugetlbfs`.  I think it's
related to the fact that hugetlbfs is properly not correctly setting
itself up in this state?:

  Unable to handle kernel paging request for data at address 0x00000031
  Faulting instruction address: 0xc000000000245710
  Oops: Kernel access of bad area, sig: 11 [#1]
  SMP NR_CPUS=2048 NUMA pSeries
  ....

In KVM guests on Power, in a guest not backed by hugepages, we see the
following:

  AnonHugePages:         0 kB
  HugePages_Total:       0
  HugePages_Free:        0
  HugePages_Rsvd:        0
  HugePages_Surp:        0
  Hugepagesize:         64 kB

HPAGE_SHIFT == 0 in this configuration, which indicates that hugepages
are not supported at boot-time, but this is only checked in
hugetlb_init().  Extract the check to a helper function, and use it in a
few relevant places.

This does make hugetlbfs not supported (not registered at all) in this
environment.  I believe this is fine, as there are no valid hugepages
and that won't change at runtime.

[akpm@linux-foundation.org: use pr_info(), per Mel]
[akpm@linux-foundation.org: fix build when HPAGE_SHIFT is undefined]
Signed-off-by: Nishanth Aravamudan 
Reviewed-by: Aneesh Kumar K.V 
Acked-by: Mel Gorman 
Cc: Randy Dunlap 
Signed-off-by: Andrew Morton 
Signed-off-by: Linus Torvalds 
[bwh: Backported to 3.2:
 - Drop changes to hugetlb_show_meminfo()
 - Adjust context]
Signed-off-by: Ben Hutchings

bio: return EINTR if copying to user space got interrupted

2016-04-30T22:05:26+00:00

commit 2d99b55d378c996b9692a0c93dd25f4ed5d58934 upstream.

Commit 35dc248383bbab0a7203fca4d722875bc81ef091 introduced a check for
current->mm to see if we have a user space context and only copies data
if we do. Now if an IO gets interrupted by a signal data isn't copied
into user space any more (as we don't have a user space context) but
user space isn't notified about it.

This patch modifies the behaviour to return -EINTR from bio_uncopy_user()
to notify userland that a signal has interrupted the syscall, otherwise
it could lead to a situation where the caller may get a buffer with
no data returned.

This can be reproduced by issuing SG_IO ioctl()s in one thread while
constantly sending signals to it.

Fixes: 35dc248 [SCSI] sg: Fix user memory corruption when SG_IO is interrupted by a signal
Signed-off-by: Johannes Thumshirn 
Signed-off-by: Hannes Reinecke 
Signed-off-by: Jens Axboe 
[bwh: Backported to 3.2:
 - Adjust filename
 - Put the assignment in the existing 'else' block]
Signed-off-by: Ben Hutchings

ext4: fix NULL pointer dereference in ext4_mark_inode_dirty()

2016-04-30T22:05:24+00:00

commit 5e1021f2b6dff1a86a468a1424d59faae2bc63c1 upstream.

ext4_reserve_inode_write() in ext4_mark_inode_dirty() could fail on
error (e.g. EIO) and iloc.bh can be NULL in this case. But the error is
ignored in the following "if" condition and ext4_expand_extra_isize()
might be called with NULL iloc.bh set, which triggers NULL pointer
dereference.

This is uncovered by commit 8b4953e13f4c ("ext4: reserve code points for
the project quota feature"), which enlarges the ext4_inode size, and
run the following script on new kernel but with old mke2fs:

  #/bin/bash
  mnt=/mnt/ext4
  devname=ext4-error
  dev=/dev/mapper/$devname
  fsimg=/home/fs.img

  trap cleanup 0 1 2 3 9 15

  cleanup()
  {
          umount $mnt >/dev/null 2>&1
          dmsetup remove $devname
          losetup -d $backend_dev
          rm -f $fsimg
          exit 0
  }

  rm -f $fsimg
  fallocate -l 1g $fsimg
  backend_dev=`losetup -f --show $fsimg`
  devsize=`blockdev --getsz $backend_dev`

  good_tab="0 $devsize linear $backend_dev 0"
  error_tab="0 $devsize error $backend_dev 0"

  dmsetup create $devname --table "$good_tab"

  mkfs -t ext4 $dev
  mount -t ext4 -o errors=continue,strictatime $dev $mnt

  dmsetup load $devname --table "$error_tab" && dmsetup resume $devname
  echo 3 > /proc/sys/vm/drop_caches
  ls -l $mnt
  exit 0

[ Patch changed to simplify the function a tiny bit. -- Ted ]

Signed-off-by: Eryu Guan 
Signed-off-by: Theodore Ts'o 
Signed-off-by: Ben Hutchings

ocfs2/dlm: fix BUG in dlm_move_lockres_to_recovery_list

2016-04-30T22:05:21+00:00

commit be12b299a83fc807bbaccd2bcb8ec50cbb0cb55c upstream.

When master handles convert request, it queues ast first and then
returns status.  This may happen that the ast is sent before the request
status because the above two messages are sent by two threads.  And
right after the ast is sent, if master down, it may trigger BUG in
dlm_move_lockres_to_recovery_list in the requested node because ast
handler moves it to grant list without clear lock->convert_pending.  So
remove BUG_ON statement and check if the ast is processed in
dlmconvert_remote.

Signed-off-by: Joseph Qi 
Reported-by: Yiwen Jiang 
Cc: Junxiao Bi 
Cc: Mark Fasheh 
Cc: Joel Becker 
Cc: Tariq Saeed 
Cc: Junxiao Bi 
Signed-off-by: Andrew Morton 
Signed-off-by: Linus Torvalds 
Signed-off-by: Ben Hutchings

ocfs2/dlm: fix race between convert and recovery

2016-04-30T22:05:21+00:00

commit ac7cf246dfdbec3d8fed296c7bf30e16f5099dac upstream.

There is a race window between dlmconvert_remote and
dlm_move_lockres_to_recovery_list, which will cause a lock with
OCFS2_LOCK_BUSY in grant list, thus system hangs.

dlmconvert_remote
{
        spin_lock(&res->spinlock);
        list_move_tail(&lock->list, &res->converting);
        lock->convert_pending = 1;
        spin_unlock(&res->spinlock);

        status = dlm_send_remote_convert_request();
        >>>>>> race window, master has queued ast and return DLM_NORMAL,
               and then down before sending ast.
               this node detects master down and calls
               dlm_move_lockres_to_recovery_list, which will revert the
               lock to grant list.
               Then OCFS2_LOCK_BUSY won't be cleared as new master won't
               send ast any more because it thinks already be authorized.

        spin_lock(&res->spinlock);
        lock->convert_pending = 0;
        if (status != DLM_NORMAL)
                dlm_revert_pending_convert(res, lock);
        spin_unlock(&res->spinlock);
}

In this case, check if res->state has DLM_LOCK_RES_RECOVERING bit set
(res is still in recovering) or res master changed (new master has
finished recovery), reset the status to DLM_RECOVERING, then it will
retry convert.

Signed-off-by: Joseph Qi 
Reported-by: Yiwen Jiang 
Reviewed-by: Junxiao Bi 
Cc: Mark Fasheh 
Cc: Joel Becker 
Cc: Tariq Saeed 
Cc: Junxiao Bi 
Signed-off-by: Andrew Morton 
Signed-off-by: Linus Torvalds 
Signed-off-by: Ben Hutchings

fs/coredump: prevent fsuid=0 dumps into user-controlled directories

2016-04-30T22:05:20+00:00

commit 378c6520e7d29280f400ef2ceaf155c86f05a71a upstream.

This commit fixes the following security hole affecting systems where
all of the following conditions are fulfilled:

 - The fs.suid_dumpable sysctl is set to 2.
 - The kernel.core_pattern sysctl's value starts with "/". (Systems
   where kernel.core_pattern starts with "|/" are not affected.)
 - Unprivileged user namespace creation is permitted. (This is
   true on Linux >=3.8, but some distributions disallow it by
   default using a distro patch.)

Under these conditions, if a program executes under secure exec rules,
causing it to run with the SUID_DUMP_ROOT flag, then unshares its user
namespace, changes its root directory and crashes, the coredump will be
written using fsuid=0 and a path derived from kernel.core_pattern - but
this path is interpreted relative to the root directory of the process,
allowing the attacker to control where a coredump will be written with
root privileges.

To fix the security issue, always interpret core_pattern for dumps that
are written under SUID_DUMP_ROOT relative to the root directory of init.

Signed-off-by: Jann Horn 
Acked-by: Kees Cook 
Cc: Al Viro 
Cc: "Eric W. Biederman" 
Cc: Andy Lutomirski 
Cc: Oleg Nesterov 
Signed-off-by: Andrew Morton 
Signed-off-by: Linus Torvalds 
[bwh: Backported to 3.2: adjust filename, context]
Signed-off-by: Ben Hutchings

splice: handle zero nr_pages in splice_to_pipe()

2016-04-30T22:05:20+00:00

commit d6785d9152147596f60234157da2b02540c3e60f upstream.

Running the following command:

 busybox cat /sys/kernel/debug/tracing/trace_pipe > /dev/null

with any tracing enabled pretty very quickly leads to various NULL
pointer dereferences and VM BUG_ON()s, such as these:

 BUG: unable to handle kernel NULL pointer dereference at 0000000000000020
 IP: [] generic_pipe_buf_release+0xc/0x40
 Call Trace:
  [] splice_direct_to_actor+0x143/0x1e0
  [] ? generic_pipe_buf_nosteal+0x10/0x10
  [] do_splice_direct+0x8f/0xb0
  [] do_sendfile+0x199/0x380
  [] SyS_sendfile64+0x90/0xa0
  [] entry_SYSCALL_64_fastpath+0x12/0x6d

 page dumped because: VM_BUG_ON_PAGE(atomic_read(&page->_count) == 0)
 kernel BUG at include/linux/mm.h:367!
 invalid opcode: 0000 [#1] PREEMPT SMP DEBUG_PAGEALLOC
 RIP: [] generic_pipe_buf_release+0x3c/0x40
 Call Trace:
  [] splice_direct_to_actor+0x143/0x1e0
  [] ? generic_pipe_buf_nosteal+0x10/0x10
  [] do_splice_direct+0x8f/0xb0
  [] do_sendfile+0x199/0x380
  [] SyS_sendfile64+0x90/0xa0
  [] tracesys_phase2+0x84/0x89

(busybox's cat uses sendfile(2), unlike the coreutils version)

This is because tracing_splice_read_pipe() can call splice_to_pipe()
with spd->nr_pages == 0.  spd_pages underflows in splice_to_pipe() and
we fill the page pointers and the other fields of the pipe_buffers with
garbage.

All other callers of splice_to_pipe() avoid calling it when nr_pages ==
0, and we could make tracing_splice_read_pipe() do that too, but it
seems reasonable to have splice_to_page() handle this condition
gracefully.

Signed-off-by: Rabin Vincent 
Reviewed-by: Christoph Hellwig 
Signed-off-by: Al Viro 
Signed-off-by: Ben Hutchings

nfsd: fix deadlock secinfo+readdir compound

2016-04-30T22:05:18+00:00

commit 2f6fc056e899bd0144a08da5cacaecbe8997cd74 upstream.

nfsd_lookup_dentry exits with the parent filehandle locked.  fh_put also
unlocks if necessary (nfsd filehandle locking is probably too lenient),
so it gets unlocked eventually, but if the following op in the compound
needs to lock it again, we can deadlock.

A fuzzer ran into this; normal clients don't send a secinfo followed by
a readdir in the same compound.

Signed-off-by: J. Bruce Fields 
[bwh: Backported to 3.2: adjust context]
Signed-off-by: Ben Hutchings