linux-stable.git/fs, branch v3.2.19 Linux kernel stable tree Avoid beyond bounds copy while caching ACL 2012-05-30T23:44:06+00:00 Sachin Prabhu sprabhu@redhat.com 2012-04-17T13:36:40+00:00 b7d52ac86a9753520a696af25d333e3451eeae92 commit 5794d21ef4639f0e33440927bb903f9598c21e92 upstream. When attempting to cache ACLs returned from the server, if the bitmap size + the ACL size is greater than a PAGE_SIZE but the ACL size itself is smaller than a PAGE_SIZE, we can read past the buffer page boundary. Signed-off-by: Sachin Prabhu <sprabhu@redhat.com> Reported-by: Jian Li <jiali@redhat.com> Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com> Signed-off-by: Ben Hutchings <ben@decadent.org.uk> 
commit 5794d21ef4639f0e33440927bb903f9598c21e92 upstream.

When attempting to cache ACLs returned from the server, if the bitmap
size + the ACL size is greater than a PAGE_SIZE but the ACL size itself
is smaller than a PAGE_SIZE, we can read past the buffer page boundary.

Signed-off-by: Sachin Prabhu <sprabhu@redhat.com>
Reported-by: Jian Li <jiali@redhat.com>
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
Avoid reading past buffer when calling GETACL 2012-05-30T23:44:06+00:00 Sachin Prabhu sprabhu@redhat.com 2012-04-17T13:35:39+00:00 84e017e3ff4113a32c827f2d7f96e1a9b1f7a677 commit 5a00689930ab975fdd1b37b034475017e460cf2a upstream. Bug noticed in commit bf118a342f10dafe44b14451a1392c3254629a1f When calling GETACL, if the size of the bitmap array, the length attribute and the acl returned by the server is greater than the allocated buffer(args.acl_len), we can Oops with a General Protection fault at _copy_from_pages() when we attempt to read past the pages allocated. This patch allocates an extra PAGE for the bitmap and checks to see that the bitmap + attribute_length + ACLs don't exceed the buffer space allocated to it. Signed-off-by: Sachin Prabhu <sprabhu@redhat.com> Reported-by: Jian Li <jiali@redhat.com> [Trond: Fixed a size_t vs unsigned int printk() warning] Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com> Signed-off-by: Ben Hutchings <ben@decadent.org.uk> 
commit 5a00689930ab975fdd1b37b034475017e460cf2a upstream.

Bug noticed in commit
bf118a342f10dafe44b14451a1392c3254629a1f

When calling GETACL, if the size of the bitmap array, the length
attribute and the acl returned by the server is greater than the
allocated buffer(args.acl_len), we can Oops with a General Protection
fault at _copy_from_pages() when we attempt to read past the pages
allocated.

This patch allocates an extra PAGE for the bitmap and checks to see that
the bitmap + attribute_length + ACLs don't exceed the buffer space
allocated to it.

Signed-off-by: Sachin Prabhu <sprabhu@redhat.com>
Reported-by: Jian Li <jiali@redhat.com>
[Trond: Fixed a size_t vs unsigned int printk() warning]
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
NFS4: fix compile warnings in nfs4proc.c 2012-05-30T23:44:05+00:00 Peng Tao bergwolf@gmail.com 2012-01-10T14:42:47+00:00 4910b0c6a122dade90898c079027423a3204ac44 commit de040beccd52bb5fcac90031505384d037b1111c upstream. compile in nfs-for-3.3 branch shows following warnings. Fix it here. fs/nfs/nfs4proc.c: In function ‘__nfs4_get_acl_uncached’: fs/nfs/nfs4proc.c:3589: warning: format ‘%ld’ expects type ‘long int’, but argument 4 has type ‘size_t’ fs/nfs/nfs4proc.c:3589: warning: format ‘%ld’ expects type ‘long int’, but argument 6 has type ‘size_t’ Signed-off-by: Peng Tao <peng_tao@emc.com> Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com> Signed-off-by: Ben Hutchings <ben@decadent.org.uk> 
commit de040beccd52bb5fcac90031505384d037b1111c upstream.

compile in nfs-for-3.3 branch shows following warnings. Fix it here.

fs/nfs/nfs4proc.c: In function ‘__nfs4_get_acl_uncached’:
fs/nfs/nfs4proc.c:3589: warning: format ‘%ld’ expects type ‘long int’, but argument 4 has type ‘size_t’
fs/nfs/nfs4proc.c:3589: warning: format ‘%ld’ expects type ‘long int’, but argument 6 has type ‘size_t’

Signed-off-by: Peng Tao <peng_tao@emc.com>
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
block: don't mark buffers beyond end of disk as mapped 2012-05-30T23:44:04+00:00 Jeff Moyer jmoyer@redhat.com 2012-05-11T14:34:10+00:00 4f2ab0adb6a14e0a265aeb724a1d681793621c94 commit 080399aaaf3531f5b8761ec0ac30ff98891e8686 upstream. Hi, We have a bug report open where a squashfs image mounted on ppc64 would exhibit errors due to trying to read beyond the end of the disk. It can easily be reproduced by doing the following: [root@ibm-p750e-02-lp3 ~]# ls -l install.img -rw-r--r-- 1 root root 142032896 Apr 30 16:46 install.img [root@ibm-p750e-02-lp3 ~]# mount -o loop ./install.img /mnt/test [root@ibm-p750e-02-lp3 ~]# dd if=/dev/loop0 of=/dev/null dd: reading `/dev/loop0': Input/output error 277376+0 records in 277376+0 records out 142016512 bytes (142 MB) copied, 0.9465 s, 150 MB/s In dmesg, you'll find the following: squashfs: version 4.0 (2009/01/31) Phillip Lougher [ 43.106012] attempt to access beyond end of device [ 43.106029] loop0: rw=0, want=277410, limit=277408 [ 43.106039] Buffer I/O error on device loop0, logical block 138704 [ 43.106053] attempt to access beyond end of device [ 43.106057] loop0: rw=0, want=277412, limit=277408 [ 43.106061] Buffer I/O error on device loop0, logical block 138705 [ 43.106066] attempt to access beyond end of device [ 43.106070] loop0: rw=0, want=277414, limit=277408 [ 43.106073] Buffer I/O error on device loop0, logical block 138706 [ 43.106078] attempt to access beyond end of device [ 43.106081] loop0: rw=0, want=277416, limit=277408 [ 43.106085] Buffer I/O error on device loop0, logical block 138707 [ 43.106089] attempt to access beyond end of device [ 43.106093] loop0: rw=0, want=277418, limit=277408 [ 43.106096] Buffer I/O error on device loop0, logical block 138708 [ 43.106101] attempt to access beyond end of device [ 43.106104] loop0: rw=0, want=277420, limit=277408 [ 43.106108] Buffer I/O error on device loop0, logical block 138709 [ 43.106112] attempt to access beyond end of device [ 43.106116] loop0: rw=0, want=277422, limit=277408 [ 43.106120] Buffer I/O error on device loop0, logical block 138710 [ 43.106124] attempt to access beyond end of device [ 43.106128] loop0: rw=0, want=277424, limit=277408 [ 43.106131] Buffer I/O error on device loop0, logical block 138711 [ 43.106135] attempt to access beyond end of device [ 43.106139] loop0: rw=0, want=277426, limit=277408 [ 43.106143] Buffer I/O error on device loop0, logical block 138712 [ 43.106147] attempt to access beyond end of device [ 43.106151] loop0: rw=0, want=277428, limit=277408 [ 43.106154] Buffer I/O error on device loop0, logical block 138713 [ 43.106158] attempt to access beyond end of device [ 43.106162] loop0: rw=0, want=277430, limit=277408 [ 43.106166] attempt to access beyond end of device [ 43.106169] loop0: rw=0, want=277432, limit=277408 ... [ 43.106307] attempt to access beyond end of device [ 43.106311] loop0: rw=0, want=277470, limit=2774 Squashfs manages to read in the end block(s) of the disk during the mount operation. Then, when dd reads the block device, it leads to block_read_full_page being called with buffers that are beyond end of disk, but are marked as mapped. Thus, it would end up submitting read I/O against them, resulting in the errors mentioned above. I fixed the problem by modifying init_page_buffers to only set the buffer mapped if it fell inside of i_size. Cheers, Jeff Signed-off-by: Jeff Moyer <jmoyer@redhat.com> Acked-by: Nick Piggin <npiggin@kernel.dk> -- Changes from v1->v2: re-used max_block, as suggested by Nick Piggin. Signed-off-by: Jens Axboe <axboe@kernel.dk> Signed-off-by: Ben Hutchings <ben@decadent.org.uk> 
commit 080399aaaf3531f5b8761ec0ac30ff98891e8686 upstream.

Hi,

We have a bug report open where a squashfs image mounted on ppc64 would
exhibit errors due to trying to read beyond the end of the disk.  It can
easily be reproduced by doing the following:

[root@ibm-p750e-02-lp3 ~]# ls -l install.img
-rw-r--r-- 1 root root 142032896 Apr 30 16:46 install.img
[root@ibm-p750e-02-lp3 ~]# mount -o loop ./install.img /mnt/test
[root@ibm-p750e-02-lp3 ~]# dd if=/dev/loop0 of=/dev/null
dd: reading `/dev/loop0': Input/output error
277376+0 records in
277376+0 records out
142016512 bytes (142 MB) copied, 0.9465 s, 150 MB/s

In dmesg, you'll find the following:

squashfs: version 4.0 (2009/01/31) Phillip Lougher
[   43.106012] attempt to access beyond end of device
[   43.106029] loop0: rw=0, want=277410, limit=277408
[   43.106039] Buffer I/O error on device loop0, logical block 138704
[   43.106053] attempt to access beyond end of device
[   43.106057] loop0: rw=0, want=277412, limit=277408
[   43.106061] Buffer I/O error on device loop0, logical block 138705
[   43.106066] attempt to access beyond end of device
[   43.106070] loop0: rw=0, want=277414, limit=277408
[   43.106073] Buffer I/O error on device loop0, logical block 138706
[   43.106078] attempt to access beyond end of device
[   43.106081] loop0: rw=0, want=277416, limit=277408
[   43.106085] Buffer I/O error on device loop0, logical block 138707
[   43.106089] attempt to access beyond end of device
[   43.106093] loop0: rw=0, want=277418, limit=277408
[   43.106096] Buffer I/O error on device loop0, logical block 138708
[   43.106101] attempt to access beyond end of device
[   43.106104] loop0: rw=0, want=277420, limit=277408
[   43.106108] Buffer I/O error on device loop0, logical block 138709
[   43.106112] attempt to access beyond end of device
[   43.106116] loop0: rw=0, want=277422, limit=277408
[   43.106120] Buffer I/O error on device loop0, logical block 138710
[   43.106124] attempt to access beyond end of device
[   43.106128] loop0: rw=0, want=277424, limit=277408
[   43.106131] Buffer I/O error on device loop0, logical block 138711
[   43.106135] attempt to access beyond end of device
[   43.106139] loop0: rw=0, want=277426, limit=277408
[   43.106143] Buffer I/O error on device loop0, logical block 138712
[   43.106147] attempt to access beyond end of device
[   43.106151] loop0: rw=0, want=277428, limit=277408
[   43.106154] Buffer I/O error on device loop0, logical block 138713
[   43.106158] attempt to access beyond end of device
[   43.106162] loop0: rw=0, want=277430, limit=277408
[   43.106166] attempt to access beyond end of device
[   43.106169] loop0: rw=0, want=277432, limit=277408
...
[   43.106307] attempt to access beyond end of device
[   43.106311] loop0: rw=0, want=277470, limit=2774

Squashfs manages to read in the end block(s) of the disk during the
mount operation.  Then, when dd reads the block device, it leads to
block_read_full_page being called with buffers that are beyond end of
disk, but are marked as mapped.  Thus, it would end up submitting read
I/O against them, resulting in the errors mentioned above.  I fixed the
problem by modifying init_page_buffers to only set the buffer mapped if
it fell inside of i_size.

Cheers,
Jeff

Signed-off-by: Jeff Moyer <jmoyer@redhat.com>
Acked-by: Nick Piggin <npiggin@kernel.dk>

--

Changes from v1->v2: re-used max_block, as suggested by Nick Piggin.
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
cifs: fix revalidation test in cifs_llseek() 2012-05-30T23:43:54+00:00 Dan Carpenter dan.carpenter@oracle.com 2012-04-30T14:36:21+00:00 6c24eeef039c3fcc0cd81ec4eead2de869eba383 commit 48a5730e5b71201e226ff06e245bf308feba5f10 upstream. This test is always true so it means we revalidate the length every time, which generates more network traffic. When it is SEEK_SET or SEEK_CUR, then we don't need to revalidate. Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Reviewed-by: Jeff Layton <jlayton@redhat.com> Signed-off-by: Steve French <sfrench@us.ibm.com> Signed-off-by: Ben Hutchings <ben@decadent.org.uk> 
commit 48a5730e5b71201e226ff06e245bf308feba5f10 upstream.

This test is always true so it means we revalidate the length every
time, which generates more network traffic.  When it is SEEK_SET or
SEEK_CUR, then we don't need to revalidate.

Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Reviewed-by: Jeff Layton <jlayton@redhat.com>
Signed-off-by: Steve French <sfrench@us.ibm.com>
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
wake up s_wait_unfrozen when ->freeze_fs fails 2012-05-30T23:43:54+00:00 Kazuya Mio k-mio@sx.jp.nec.com 2011-12-01T07:51:07+00:00 42bbdb289122169ec6d4f2a4bec848491c4408a7 commit e1616300a20c80396109c1cf013ba9a36055a3da upstream. dd slept infinitely when fsfeeze failed because of EIO. To fix this problem, if ->freeze_fs fails, freeze_super() wakes up the tasks waiting for the filesystem to become unfrozen. When s_frozen isn't SB_UNFROZEN in __generic_file_aio_write(), the function sleeps until FITHAW ioctl wakes up s_wait_unfrozen. However, if ->freeze_fs fails, s_frozen is set to SB_UNFROZEN and then freeze_super() returns an error number. In this case, FITHAW ioctl returns EINVAL because s_frozen is already SB_UNFROZEN. There is no way to wake up s_wait_unfrozen, so __generic_file_aio_write() sleeps infinitely. Signed-off-by: Kazuya Mio <k-mio@sx.jp.nec.com> Signed-off-by: Al Viro <viro@zeniv.linux.org.uk> Signed-off-by: Ben Hutchings <ben@decadent.org.uk> 
commit e1616300a20c80396109c1cf013ba9a36055a3da upstream.

dd slept infinitely when fsfeeze failed because of EIO.
To fix this problem, if ->freeze_fs fails, freeze_super() wakes up
the tasks waiting for the filesystem to become unfrozen.

When s_frozen isn't SB_UNFROZEN in __generic_file_aio_write(),
the function sleeps until FITHAW ioctl wakes up s_wait_unfrozen.

However, if ->freeze_fs fails, s_frozen is set to SB_UNFROZEN and then
freeze_super() returns an error number. In this case, FITHAW ioctl returns
EINVAL because s_frozen is already SB_UNFROZEN. There is no way to wake up
s_wait_unfrozen, so __generic_file_aio_write() sleeps infinitely.

Signed-off-by: Kazuya Mio <k-mio@sx.jp.nec.com>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
ext4: fix error handling on inode bitmap corruption 2012-05-30T23:43:52+00:00 Jan Kara jack@suse.cz 2011-12-18T22:37:02+00:00 4d44d39c1a2ac1fe747f1808220ee09369edc313 commit acd6ad83517639e8f09a8c5525b1dccd81cd2a10 upstream. When insert_inode_locked() fails in ext4_new_inode() it most likely means inode bitmap got corrupted and we allocated again inode which is already in use. Also doing unlock_new_inode() during error recovery is wrong since the inode does not have I_NEW set. Fix the problem by jumping to fail: (instead of fail_drop:) which declares filesystem error and does not call unlock_new_inode(). Signed-off-by: Jan Kara <jack@suse.cz> Signed-off-by: "Theodore Ts'o" <tytso@mit.edu> Signed-off-by: Ben Hutchings <ben@decadent.org.uk> 
commit acd6ad83517639e8f09a8c5525b1dccd81cd2a10 upstream.

When insert_inode_locked() fails in ext4_new_inode() it most likely means inode
bitmap got corrupted and we allocated again inode which is already in use. Also
doing unlock_new_inode() during error recovery is wrong since the inode does
not have I_NEW set. Fix the problem by jumping to fail: (instead of fail_drop:)
which declares filesystem error and does not call unlock_new_inode().

Signed-off-by: Jan Kara <jack@suse.cz>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
ext3: Fix error handling on inode bitmap corruption 2012-05-30T23:43:52+00:00 Jan Kara jack@suse.cz 2011-12-08T20:13:46+00:00 b5451060a038e1d725d22ca8e852704903167514 commit 1415dd8705394399d59a3df1ab48d149e1e41e77 upstream. When insert_inode_locked() fails in ext3_new_inode() it most likely means inode bitmap got corrupted and we allocated again inode which is already in use. Also doing unlock_new_inode() during error recovery is wrong since inode does not have I_NEW set. Fix the problem by jumping to fail: (instead of fail_drop:) which declares filesystem error and does not call unlock_new_inode(). Reviewed-by: Eric Sandeen <sandeen@redhat.com> Signed-off-by: Jan Kara <jack@suse.cz> Signed-off-by: Ben Hutchings <ben@decadent.org.uk> 
commit 1415dd8705394399d59a3df1ab48d149e1e41e77 upstream.

When insert_inode_locked() fails in ext3_new_inode() it most likely
means inode bitmap got corrupted and we allocated again inode which
is already in use. Also doing unlock_new_inode() during error recovery
is wrong since inode does not have I_NEW set. Fix the problem by jumping
to fail: (instead of fail_drop:) which declares filesystem error and
does not call unlock_new_inode().

Reviewed-by: Eric Sandeen <sandeen@redhat.com>
Signed-off-by: Jan Kara <jack@suse.cz>
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
vfs: make AIO use the proper rw_verify_area() area helpers 2012-05-30T23:43:29+00:00 Linus Torvalds torvalds@linux-foundation.org 2012-05-21T23:06:20+00:00 07343eab681bf8c22a2b31d978569a5f65253171 commit a70b52ec1aaeaf60f4739edb1b422827cb6f3893 upstream. We had for some reason overlooked the AIO interface, and it didn't use the proper rw_verify_area() helper function that checks (for example) mandatory locking on the file, and that the size of the access doesn't cause us to overflow the provided offset limits etc. Instead, AIO did just the security_file_permission() thing (that rw_verify_area() also does) directly. This fixes it to do all the proper helper functions, which not only means that now mandatory file locking works with AIO too, we can actually remove lines of code. Reported-by: Manish Honap <manish_honap_vit@yahoo.co.in> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by: Ben Hutchings <ben@decadent.org.uk> 
commit a70b52ec1aaeaf60f4739edb1b422827cb6f3893 upstream.

We had for some reason overlooked the AIO interface, and it didn't use
the proper rw_verify_area() helper function that checks (for example)
mandatory locking on the file, and that the size of the access doesn't
cause us to overflow the provided offset limits etc.

Instead, AIO did just the security_file_permission() thing (that
rw_verify_area() also does) directly.

This fixes it to do all the proper helper functions, which not only
means that now mandatory file locking works with AIO too, we can
actually remove lines of code.

Reported-by: Manish Honap <manish_honap_vit@yahoo.co.in>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
bio allocation failure due to bio_get_nr_vecs() 2012-05-30T23:43:15+00:00 Bernd Schubert bernd.schubert@itwm.fraunhofer.de 2012-05-11T14:36:44+00:00 6609c1cd5ca261eadaddaca83d71977a8dfb4032 commit f908ee9463b09ddd05e1c1a0111132212dc05fac upstream. The number of bio_get_nr_vecs() is passed down via bio_alloc() to bvec_alloc_bs(), which fails the bio allocation if nr_iovecs > BIO_MAX_PAGES. For the underlying caller this causes an unexpected bio allocation failure. Limiting to queue_max_segments() is not sufficient, as max_segments also might be very large. bvec_alloc_bs(gfp_mask, nr_iovecs, ) => NULL when nr_iovecs > BIO_MAX_PAGES bio_alloc_bioset(gfp_mask, nr_iovecs, ...) bio_alloc(GFP_NOIO, nvecs) xfs_alloc_ioend_bio() Signed-off-by: Bernd Schubert <bernd.schubert@itwm.fraunhofer.de> Signed-off-by: Jens Axboe <axboe@kernel.dk> Signed-off-by: Ben Hutchings <ben@decadent.org.uk> 
commit f908ee9463b09ddd05e1c1a0111132212dc05fac upstream.

The number of bio_get_nr_vecs() is passed down via bio_alloc() to
bvec_alloc_bs(), which fails the bio allocation if
nr_iovecs > BIO_MAX_PAGES. For the underlying caller this causes an
unexpected bio allocation failure.
Limiting to queue_max_segments() is not sufficient, as max_segments
also might be very large.

bvec_alloc_bs(gfp_mask, nr_iovecs, ) => NULL when nr_iovecs  > BIO_MAX_PAGES
bio_alloc_bioset(gfp_mask, nr_iovecs, ...)
bio_alloc(GFP_NOIO, nvecs)
xfs_alloc_ioend_bio()

Signed-off-by: Bernd Schubert <bernd.schubert@itwm.fraunhofer.de>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>