linux-stable.git/fs, branch v3.16.79

CIFS: Fix oplock handling for SMB 2.1+ protocols

2019-12-10T18:01:27+00:00

commit a016e2794fc3a245a91946038dd8f34d65e53cc3 upstream.

There may be situations when a server negotiates SMB 2.1
protocol version or higher but responds to a CREATE request
with an oplock rather than a lease.

Currently the client doesn't handle such a case correctly:
when another CREATE comes in the server sends an oplock
break to the initial CREATE and the client doesn't send
an ack back due to a wrong caching level being set (READ
instead of RWH). Missing an oplock break ack makes the
server wait until the break times out which dramatically
increases the latency of the second CREATE.

Fix this by properly detecting oplocks when using SMB 2.1
protocol version and higher.

Signed-off-by: Pavel Shilovsky 
Signed-off-by: Steve French 
Reviewed-by: Ronnie Sahlberg 
Signed-off-by: Ben Hutchings

fuse: fix missing unlock_page in fuse_writepage()

2019-12-10T18:01:26+00:00

commit d5880c7a8620290a6c90ced7a0e8bd0ad9419601 upstream.

unlock_page() was missing in case of an already in-flight write against the
same page.

Signed-off-by: Vasily Averin 
Fixes: ff17be086477 ("fuse: writepage: skip already in flight")
Signed-off-by: Miklos Szeredi 
Signed-off-by: Ben Hutchings

CIFS: fix max ea value size

2019-12-10T18:01:26+00:00

commit 63d37fb4ce5ae7bf1e58f906d1bf25f036fe79b2 upstream.

It should not be larger then the slab max buf size. If user
specifies a larger size, it passes this check and goes
straightly to SMB2_set_info_init performing an insecure memcpy.

Signed-off-by: Murphy Zhou 
Reviewed-by: Aurelien Aptel 
Signed-off-by: Steve French 
[bwh: Backported to 3.16: adjust context]
Signed-off-by: Ben Hutchings

configfs: fix a deadlock in configfs_symlink()

2019-12-10T18:01:20+00:00

commit 351e5d869e5ac10cb40c78b5f2d7dfc816ad4587 upstream.

Configfs abuses symlink(2).  Unlike the normal filesystems, it
wants the target resolved at symlink(2) time, like link(2) would've
done.  The problem is that ->symlink() is called with the parent
directory locked exclusive, so resolving the target inside the
->symlink() is easily deadlocked.

Short of really ugly games in sys_symlink() itself, all we can
do is to unlock the parent before resolving the target and
relock it after.  However, that invalidates the checks done
by the caller of ->symlink(), so we have to
	* check that dentry is still where it used to be
(it couldn't have been moved, but it could've been unhashed)
	* recheck that it's still negative (somebody else
might've successfully created a symlink with the same name
while we were looking the target up)
	* recheck the permissions on the parent directory.

Signed-off-by: Al Viro 
Signed-off-by: Christoph Hellwig 
[bwh: Backported to 3.16: open-code inode_{,un}lock()]
Signed-off-by: Ben Hutchings

btrfs: Relinquish CPUs in btrfs_compare_trees

2019-12-10T18:01:19+00:00

commit 6af112b11a4bc1b560f60a618ac9c1dcefe9836e upstream.

When doing any form of incremental send the parent and the child trees
need to be compared via btrfs_compare_trees. This  can result in long
loop chains without ever relinquishing the CPU. This causes softlockup
detector to trigger when comparing trees with a lot of items. Example
report:

watchdog: BUG: soft lockup - CPU#0 stuck for 24s! [snapperd:16153]
CPU: 0 PID: 16153 Comm: snapperd Not tainted 5.2.9-1-default #1 openSUSE Tumbleweed (unreleased)
Hardware name: QEMU KVM Virtual Machine, BIOS 0.0.0 02/06/2015
pstate: 40000005 (nZcv daif -PAN -UAO)
pc : __ll_sc_arch_atomic_sub_return+0x14/0x20
lr : btrfs_release_extent_buffer_pages+0xe0/0x1e8 [btrfs]
sp : ffff00001273b7e0
Call trace:
 __ll_sc_arch_atomic_sub_return+0x14/0x20
 release_extent_buffer+0xdc/0x120 [btrfs]
 free_extent_buffer.part.0+0xb0/0x118 [btrfs]
 free_extent_buffer+0x24/0x30 [btrfs]
 btrfs_release_path+0x4c/0xa0 [btrfs]
 btrfs_free_path.part.0+0x20/0x40 [btrfs]
 btrfs_free_path+0x24/0x30 [btrfs]
 get_inode_info+0xa8/0xf8 [btrfs]
 finish_inode_if_needed+0xe0/0x6d8 [btrfs]
 changed_cb+0x9c/0x410 [btrfs]
 btrfs_compare_trees+0x284/0x648 [btrfs]
 send_subvol+0x33c/0x520 [btrfs]
 btrfs_ioctl_send+0x8a0/0xaf0 [btrfs]
 btrfs_ioctl+0x199c/0x2288 [btrfs]
 do_vfs_ioctl+0x4b0/0x820
 ksys_ioctl+0x84/0xb8
 __arm64_sys_ioctl+0x28/0x38
 el0_svc_common.constprop.0+0x7c/0x188
 el0_svc_handler+0x34/0x90
 el0_svc+0x8/0xc

Fix this by adding a call to cond_resched at the beginning of the main
loop in btrfs_compare_trees.

Fixes: 7069830a9e38 ("Btrfs: add btrfs_compare_trees function")
Reviewed-by: Johannes Thumshirn 
Signed-off-by: Nikolay Borisov 
Reviewed-by: David Sterba 
Signed-off-by: David Sterba 
[bwh: Backported to 3.16: adjust filename]
Signed-off-by: Ben Hutchings

Btrfs: fix use-after-free when using the tree modification log

2019-12-10T18:01:18+00:00

commit efad8a853ad2057f96664328a0d327a05ce39c76 upstream.

At ctree.c:get_old_root(), we are accessing a root's header owner field
after we have freed the respective extent buffer. This results in an
use-after-free that can lead to crashes, and when CONFIG_DEBUG_PAGEALLOC
is set, results in a stack trace like the following:

  [ 3876.799331] stack segment: 0000 [#1] SMP DEBUG_PAGEALLOC PTI
  [ 3876.799363] CPU: 0 PID: 15436 Comm: pool Not tainted 5.3.0-rc3-btrfs-next-54 #1
  [ 3876.799385] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.12.0-0-ga698c8995f-prebuilt.qemu.org 04/01/2014
  [ 3876.799433] RIP: 0010:btrfs_search_old_slot+0x652/0xd80 [btrfs]
  (...)
  [ 3876.799502] RSP: 0018:ffff9f08c1a2f9f0 EFLAGS: 00010286
  [ 3876.799518] RAX: ffff8dd300000000 RBX: ffff8dd85a7a9348 RCX: 000000038da26000
  [ 3876.799538] RDX: 0000000000000000 RSI: ffffe522ce368980 RDI: 0000000000000246
  [ 3876.799559] RBP: dae1922adadad000 R08: 0000000008020000 R09: ffffe522c0000000
  [ 3876.799579] R10: ffff8dd57fd788c8 R11: 000000007511b030 R12: ffff8dd781ddc000
  [ 3876.799599] R13: ffff8dd9e6240578 R14: ffff8dd6896f7a88 R15: ffff8dd688cf90b8
  [ 3876.799620] FS:  00007f23ddd97700(0000) GS:ffff8dda20200000(0000) knlGS:0000000000000000
  [ 3876.799643] CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
  [ 3876.799660] CR2: 00007f23d4024000 CR3: 0000000710bb0005 CR4: 00000000003606f0
  [ 3876.799682] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
  [ 3876.799703] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400
  [ 3876.799723] Call Trace:
  [ 3876.799735]  ? do_raw_spin_unlock+0x49/0xc0
  [ 3876.799749]  ? _raw_spin_unlock+0x24/0x30
  [ 3876.799779]  resolve_indirect_refs+0x1eb/0xc80 [btrfs]
  [ 3876.799810]  find_parent_nodes+0x38d/0x1180 [btrfs]
  [ 3876.799841]  btrfs_check_shared+0x11a/0x1d0 [btrfs]
  [ 3876.799870]  ? extent_fiemap+0x598/0x6e0 [btrfs]
  [ 3876.799895]  extent_fiemap+0x598/0x6e0 [btrfs]
  [ 3876.799913]  do_vfs_ioctl+0x45a/0x700
  [ 3876.799926]  ksys_ioctl+0x70/0x80
  [ 3876.799938]  ? trace_hardirqs_off_thunk+0x1a/0x20
  [ 3876.799953]  __x64_sys_ioctl+0x16/0x20
  [ 3876.799965]  do_syscall_64+0x62/0x220
  [ 3876.799977]  entry_SYSCALL_64_after_hwframe+0x49/0xbe
  [ 3876.799993] RIP: 0033:0x7f23e0013dd7
  (...)
  [ 3876.800056] RSP: 002b:00007f23ddd96ca8 EFLAGS: 00000246 ORIG_RAX: 0000000000000010
  [ 3876.800078] RAX: ffffffffffffffda RBX: 00007f23d80210f8 RCX: 00007f23e0013dd7
  [ 3876.800099] RDX: 00007f23d80210f8 RSI: 00000000c020660b RDI: 0000000000000003
  [ 3876.800626] RBP: 000055fa2a2a2440 R08: 0000000000000000 R09: 00007f23ddd96d7c
  [ 3876.801143] R10: 00007f23d8022000 R11: 0000000000000246 R12: 00007f23ddd96d80
  [ 3876.801662] R13: 00007f23ddd96d78 R14: 00007f23d80210f0 R15: 00007f23ddd96d80
  (...)
  [ 3876.805107] ---[ end trace e53161e179ef04f9 ]---

Fix that by saving the root's header owner field into a local variable
before freeing the root's extent buffer, and then use that local variable
when needed.

Fixes: 30b0463a9394d9 ("Btrfs: fix accessing the root pointer in tree mod log functions")
Reviewed-by: Nikolay Borisov 
Reviewed-by: Anand Jain 
Signed-off-by: Filipe Manana 
Reviewed-by: David Sterba 
Signed-off-by: David Sterba 
Signed-off-by: Ben Hutchings

ext4: fix warning inside ext4_convert_unwritten_extents_endio

2019-12-10T18:01:14+00:00

commit e3d550c2c4f2f3dba469bc3c4b83d9332b4e99e1 upstream.

Really enable warning when CONFIG_EXT4_DEBUG is set and fix missing
first argument.  This was introduced in commit ff95ec22cd7f ("ext4:
add warning to ext4_convert_unwritten_extents_endio") and splitting
extents inside endio would trigger it.

Fixes: ff95ec22cd7f ("ext4: add warning to ext4_convert_unwritten_extents_endio")
Signed-off-by: Rakesh Pandit 
Signed-off-by: Theodore Ts'o 
Signed-off-by: Ben Hutchings

ext4: set error return correctly when ext4_htree_store_dirent fails

2019-12-10T18:01:12+00:00

commit 7a14826ede1d714f0bb56de8167c0e519041eeda upstream.

Currently when the call to ext4_htree_store_dirent fails the error return
variable 'ret' is is not being set to the error code and variable count is
instead, hence the error code is not being returned.  Fix this by assigning
ret to the error return code.

Addresses-Coverity: ("Unused value")
Fixes: 8af0f0822797 ("ext4: fix readdir error in the case of inline_data+dir_index")
Signed-off-by: Colin Ian King 
Signed-off-by: Theodore Ts'o 
Signed-off-by: Ben Hutchings

btrfs: alloc_chunk: fix more DUP stripe size handling

2019-11-22T15:57:33+00:00

commit baf92114c7e6dd6124aa3d506e4bc4b694da3bc3 upstream.

Commit 92e222df7b "btrfs: alloc_chunk: fix DUP stripe size handling"
fixed calculating the stripe_size for a new DUP chunk.

However, the same calculation reappears a bit later, and that one was
not changed yet. The resulting bug that is exposed is that the newly
allocated device extents ('stripes') can have a few MiB overlap with the
next thing stored after them, which is another device extent or the end
of the disk.

The scenario in which this can happen is:
* The block device for the filesystem is less than 10GiB in size.
* The amount of contiguous free unallocated disk space chosen to use for
  chunk allocation is 20% of the total device size, or a few MiB more or
  less.

An example:
- The filesystem device is 7880MiB (max_chunk_size gets set to 788MiB)
- There's 1578MiB unallocated raw disk space left in one contiguous
  piece.

In this case stripe_size is first calculated as 789MiB, (half of
1578MiB).

Since 789MiB (stripe_size * data_stripes) > 788MiB (max_chunk_size), we
enter the if block. Now stripe_size value is immediately overwritten
while calculating an adjusted value based on max_chunk_size, which ends
up as 788MiB.

Next, the value is rounded up to a 16MiB boundary, 800MiB, which is
actually more than the value we had before. However, the last comparison
fails to detect this, because it's comparing the value with the total
amount of free space, which is about twice the size of stripe_size.

In the example above, this means that the resulting raw disk space being
allocated is 1600MiB, while only a gap of 1578MiB has been found. The
second device extent object for this DUP chunk will overlap for 22MiB
with whatever comes next.

The underlying problem here is that the stripe_size is reused all the
time for different things. So, when entering the code in the if block,
stripe_size is immediately overwritten with something else. If later we
decide we want to have the previous value back, then the logic to
compute it was copy pasted in again.

With this change, the value in stripe_size is not unnecessarily
destroyed, so the duplicated calculation is not needed any more.

Signed-off-by: Hans van Kranenburg 
Signed-off-by: David Sterba 
Signed-off-by: Ben Hutchings

btrfs: volumes: Cleanup stripe size calculation

2019-11-22T15:57:32+00:00

commit 793ff2c88c6397b3531c08cc4f920619b56a9def upstream.

Cleanup the following things:
1) open coded SZ_16M round up
2) use min() to replace open-coded size comparison
3) code style

Signed-off-by: Qu Wenruo 
Reviewed-by: Nikolay Borisov 
Reviewed-by: Gu Jinxiang 
[ reformat comment ]
Signed-off-by: David Sterba 
[bwh: Backported to 3.16 as dependency of commit baf92114c7
 "btrfs: alloc_chunk: fix more DUP stripe size handling":
 - Add #include  for definition of SZ_16M]
Signed-off-by: Ben Hutchings 
Cc: Hans van Kranenburg