<feed xmlns='http://www.w3.org/2005/Atom'>
<title>linux-stable.git/fs, branch v3.12.73</title>
<subtitle>Linux kernel stable tree</subtitle>
<link rel='alternate' type='text/html' href='https://git.tavy.me/linux-stable.git/'/>
<entry>
<title>xfs: clear _XBF_PAGES from buffers when readahead page</title>
<updated>2017-04-07T08:38:27+00:00</updated>
<author>
<name>Darrick J. Wong</name>
<email>darrick.wong@oracle.com</email>
</author>
<published>2017-01-26T04:24:57+00:00</published>
<link rel='alternate' type='text/html' href='https://git.tavy.me/linux-stable.git/commit/?id=6cf4695d5dd09fc8edcb7f6a7c0408a697794fb4'/>
<id>6cf4695d5dd09fc8edcb7f6a7c0408a697794fb4</id>
<content type='text'>
commit 2aa6ba7b5ad3189cc27f14540aa2f57f0ed8df4b upstream.

If we try to allocate memory pages to back an xfs_buf that we're trying
to read, it's possible that we'll be so short on memory that the page
allocation fails.  For a blocking read we'll just wait, but for
readahead we simply dump all the pages we've collected so far.

Unfortunately, after dumping the pages we neglect to clear the
_XBF_PAGES state, which means that the subsequent call to xfs_buf_free
thinks that b_pages still points to pages we own.  It then double-frees
the b_pages pages.

This results in screaming about negative page refcounts from the memory
manager, which xfs oughtn't be triggering.  To reproduce this case,
mount a filesystem where the size of the inodes far outweighs the
availalble memory (a ~500M inode filesystem on a VM with 300MB memory
did the trick here) and run bulkstat in parallel with other memory
eating processes to put a huge load on the system.  The "check summary"
phase of xfs_scrub also works for this purpose.

Signed-off-by: Darrick J. Wong &lt;darrick.wong@oracle.com&gt;
Reviewed-by: Eric Sandeen &lt;sandeen@redhat.com&gt;
Cc: Ivan Kozik &lt;ivan@ludios.org&gt;
Signed-off-by: Jiri Slaby &lt;jslaby@suse.cz&gt;

</content>
<content type='xhtml'>
<div xmlns='http://www.w3.org/1999/xhtml'>
<pre>
commit 2aa6ba7b5ad3189cc27f14540aa2f57f0ed8df4b upstream.

If we try to allocate memory pages to back an xfs_buf that we're trying
to read, it's possible that we'll be so short on memory that the page
allocation fails.  For a blocking read we'll just wait, but for
readahead we simply dump all the pages we've collected so far.

Unfortunately, after dumping the pages we neglect to clear the
_XBF_PAGES state, which means that the subsequent call to xfs_buf_free
thinks that b_pages still points to pages we own.  It then double-frees
the b_pages pages.

This results in screaming about negative page refcounts from the memory
manager, which xfs oughtn't be triggering.  To reproduce this case,
mount a filesystem where the size of the inodes far outweighs the
availalble memory (a ~500M inode filesystem on a VM with 300MB memory
did the trick here) and run bulkstat in parallel with other memory
eating processes to put a huge load on the system.  The "check summary"
phase of xfs_scrub also works for this purpose.

Signed-off-by: Darrick J. Wong &lt;darrick.wong@oracle.com&gt;
Reviewed-by: Eric Sandeen &lt;sandeen@redhat.com&gt;
Cc: Ivan Kozik &lt;ivan@ludios.org&gt;
Signed-off-by: Jiri Slaby &lt;jslaby@suse.cz&gt;

</pre>
</div>
</content>
</entry>
<entry>
<title>ext4: mark inode dirty after converting inline directory</title>
<updated>2017-04-07T08:38:27+00:00</updated>
<author>
<name>Eric Biggers</name>
<email>ebiggers@google.com</email>
</author>
<published>2017-03-15T18:52:02+00:00</published>
<link rel='alternate' type='text/html' href='https://git.tavy.me/linux-stable.git/commit/?id=b9c5e82056e442717f4ec14c1d9248bc99f66a80'/>
<id>b9c5e82056e442717f4ec14c1d9248bc99f66a80</id>
<content type='text'>
commit b9cf625d6ecde0d372e23ae022feead72b4228a6 upstream.

If ext4_convert_inline_data() was called on a directory with inline
data, the filesystem was left in an inconsistent state (as considered by
e2fsck) because the file size was not increased to cover the new block.
This happened because the inode was not marked dirty after i_disksize
was updated.  Fix this by marking the inode dirty at the end of
ext4_finish_convert_inline_dir().

This bug was probably not noticed before because most users mark the
inode dirty afterwards for other reasons.  But if userspace executed
FS_IOC_SET_ENCRYPTION_POLICY with invalid parameters, as exercised by
'kvm-xfstests -c adv generic/396', then the inode was never marked dirty
after updating i_disksize.

Fixes: 3c47d54170b6a678875566b1b8d6dcf57904e49b
Signed-off-by: Eric Biggers &lt;ebiggers@google.com&gt;
Signed-off-by: Theodore Ts'o &lt;tytso@mit.edu&gt;
Signed-off-by: Jiri Slaby &lt;jslaby@suse.cz&gt;

</content>
<content type='xhtml'>
<div xmlns='http://www.w3.org/1999/xhtml'>
<pre>
commit b9cf625d6ecde0d372e23ae022feead72b4228a6 upstream.

If ext4_convert_inline_data() was called on a directory with inline
data, the filesystem was left in an inconsistent state (as considered by
e2fsck) because the file size was not increased to cover the new block.
This happened because the inode was not marked dirty after i_disksize
was updated.  Fix this by marking the inode dirty at the end of
ext4_finish_convert_inline_dir().

This bug was probably not noticed before because most users mark the
inode dirty afterwards for other reasons.  But if userspace executed
FS_IOC_SET_ENCRYPTION_POLICY with invalid parameters, as exercised by
'kvm-xfstests -c adv generic/396', then the inode was never marked dirty
after updating i_disksize.

Fixes: 3c47d54170b6a678875566b1b8d6dcf57904e49b
Signed-off-by: Eric Biggers &lt;ebiggers@google.com&gt;
Signed-off-by: Theodore Ts'o &lt;tytso@mit.edu&gt;
Signed-off-by: Jiri Slaby &lt;jslaby@suse.cz&gt;

</pre>
</div>
</content>
</entry>
<entry>
<title>xfs: don't allow di_size with high bit set</title>
<updated>2017-04-07T07:17:43+00:00</updated>
<author>
<name>Darrick J. Wong</name>
<email>darrick.wong@oracle.com</email>
</author>
<published>2016-12-05T01:38:38+00:00</published>
<link rel='alternate' type='text/html' href='https://git.tavy.me/linux-stable.git/commit/?id=ffd0475d31d0561b4d913fd6b84d5a70e56a8a49'/>
<id>ffd0475d31d0561b4d913fd6b84d5a70e56a8a49</id>
<content type='text'>
Commit ef388e2054feedaeb05399ed654bdb06f385d294 upstream.

The on-disk field di_size is used to set i_size, which is a signed
integer of loff_t.  If the high bit of di_size is set, we'll end up with
a negative i_size, which will cause all sorts of problems.  Since the
VFS won't let us create a file with such length, we should catch them
here in the verifier too.

[nborisov: Backported to 3.12]

Signed-off-by: Darrick J. Wong &lt;darrick.wong@oracle.com&gt;
Reviewed-by: Dave Chinner &lt;dchinner@redhat.com&gt;
Signed-off-by: Dave Chinner &lt;david@fromorbit.com&gt;
Signed-off-by: Nikolay Borisov &lt;nborisov@suse.com&gt;
Signed-off-by: Jiri Slaby &lt;jslaby@suse.cz&gt;
</content>
<content type='xhtml'>
<div xmlns='http://www.w3.org/1999/xhtml'>
<pre>
Commit ef388e2054feedaeb05399ed654bdb06f385d294 upstream.

The on-disk field di_size is used to set i_size, which is a signed
integer of loff_t.  If the high bit of di_size is set, we'll end up with
a negative i_size, which will cause all sorts of problems.  Since the
VFS won't let us create a file with such length, we should catch them
here in the verifier too.

[nborisov: Backported to 3.12]

Signed-off-by: Darrick J. Wong &lt;darrick.wong@oracle.com&gt;
Reviewed-by: Dave Chinner &lt;dchinner@redhat.com&gt;
Signed-off-by: Dave Chinner &lt;david@fromorbit.com&gt;
Signed-off-by: Nikolay Borisov &lt;nborisov@suse.com&gt;
Signed-off-by: Jiri Slaby &lt;jslaby@suse.cz&gt;
</pre>
</div>
</content>
</entry>
<entry>
<title>xfs: fix up xfs_swap_extent_forks inline extent handling</title>
<updated>2017-04-07T07:16:52+00:00</updated>
<author>
<name>Eric Sandeen</name>
<email>sandeen@sandeen.net</email>
</author>
<published>2016-11-08T01:55:18+00:00</published>
<link rel='alternate' type='text/html' href='https://git.tavy.me/linux-stable.git/commit/?id=35c9f7f27b0765fb2713a41d5d60d144e983221e'/>
<id>35c9f7f27b0765fb2713a41d5d60d144e983221e</id>
<content type='text'>
commit 4dfce57db6354603641132fac3c887614e3ebe81 upstream.

There have been several reports over the years of NULL pointer
dereferences in xfs_trans_log_inode during xfs_fsr processes,
when the process is doing an fput and tearing down extents
on the temporary inode, something like:

BUG: unable to handle kernel NULL pointer dereference at 0000000000000018
PID: 29439  TASK: ffff880550584fa0  CPU: 6   COMMAND: "xfs_fsr"
    [exception RIP: xfs_trans_log_inode+0x10]
 #9 [ffff8800a57bbbe0] xfs_bunmapi at ffffffffa037398e [xfs]

As it turns out, this is because the i_itemp pointer, along
with the d_ops pointer, has been overwritten with zeros
when we tear down the extents during truncate.  When the in-core
inode fork on the temporary inode used by xfs_fsr was originally
set up during the extent swap, we mistakenly looked at di_nextents
to determine whether all extents fit inline, but this misses extents
generated by speculative preallocation; we should be using if_bytes
instead.

This mistake corrupts the in-memory inode, and code in
xfs_iext_remove_inline eventually gets bad inputs, causing
it to memmove and memset incorrect ranges; this became apparent
because the two values in ifp-&gt;if_u2.if_inline_ext[1] contained
what should have been in d_ops and i_itemp; they were memmoved due
to incorrect array indexing and then the original locations
were zeroed with memset, again due to an array overrun.

Fix this by properly using i_df.if_bytes to determine the number
of extents, not di_nextents.

Thanks to dchinner for looking at this with me and spotting the
root cause.

[nborisov: Backported to 3.12]

Signed-off-by: Eric Sandeen &lt;sandeen@redhat.com&gt;
Reviewed-by: Brian Foster &lt;bfoster@redhat.com&gt;
Signed-off-by: Dave Chinner &lt;david@fromorbit.com&gt;
Signed-off-by: Nikolay Borisov &lt;nborisov@suse.com&gt;
Signed-off-by: Jiri Slaby &lt;jslaby@suse.cz&gt;
</content>
<content type='xhtml'>
<div xmlns='http://www.w3.org/1999/xhtml'>
<pre>
commit 4dfce57db6354603641132fac3c887614e3ebe81 upstream.

There have been several reports over the years of NULL pointer
dereferences in xfs_trans_log_inode during xfs_fsr processes,
when the process is doing an fput and tearing down extents
on the temporary inode, something like:

BUG: unable to handle kernel NULL pointer dereference at 0000000000000018
PID: 29439  TASK: ffff880550584fa0  CPU: 6   COMMAND: "xfs_fsr"
    [exception RIP: xfs_trans_log_inode+0x10]
 #9 [ffff8800a57bbbe0] xfs_bunmapi at ffffffffa037398e [xfs]

As it turns out, this is because the i_itemp pointer, along
with the d_ops pointer, has been overwritten with zeros
when we tear down the extents during truncate.  When the in-core
inode fork on the temporary inode used by xfs_fsr was originally
set up during the extent swap, we mistakenly looked at di_nextents
to determine whether all extents fit inline, but this misses extents
generated by speculative preallocation; we should be using if_bytes
instead.

This mistake corrupts the in-memory inode, and code in
xfs_iext_remove_inline eventually gets bad inputs, causing
it to memmove and memset incorrect ranges; this became apparent
because the two values in ifp-&gt;if_u2.if_inline_ext[1] contained
what should have been in d_ops and i_itemp; they were memmoved due
to incorrect array indexing and then the original locations
were zeroed with memset, again due to an array overrun.

Fix this by properly using i_df.if_bytes to determine the number
of extents, not di_nextents.

Thanks to dchinner for looking at this with me and spotting the
root cause.

[nborisov: Backported to 3.12]

Signed-off-by: Eric Sandeen &lt;sandeen@redhat.com&gt;
Reviewed-by: Brian Foster &lt;bfoster@redhat.com&gt;
Signed-off-by: Dave Chinner &lt;david@fromorbit.com&gt;
Signed-off-by: Nikolay Borisov &lt;nborisov@suse.com&gt;
Signed-off-by: Jiri Slaby &lt;jslaby@suse.cz&gt;
</pre>
</div>
</content>
</entry>
<entry>
<title>cancel the setfilesize transation when io error happen</title>
<updated>2017-03-28T13:49:29+00:00</updated>
<author>
<name>Zhaohongjiang</name>
<email>zhaohongjiang@huawei.com</email>
</author>
<published>2015-10-12T04:28:39+00:00</published>
<link rel='alternate' type='text/html' href='https://git.tavy.me/linux-stable.git/commit/?id=510c971aeaaebf0dce7a45d16dc3eb9eab1c8340'/>
<id>510c971aeaaebf0dce7a45d16dc3eb9eab1c8340</id>
<content type='text'>
Commit 5cb13dcd0fac071b45c4bebe1801a08ff0d89cad upstream.

When I ran xfstest/073 case, the remount process was blocked to wait
transactions to be zero. I found there was a io error happened, and
the setfilesize transaction was not released properly. We should add
the changes to cancel the io error in this case.

Reproduction steps:
1. dd if=/dev/zero of=xfs1.img bs=1M count=2048
2. mkfs.xfs xfs1.img
3. losetup -f ./xfs1.img /dev/loop0
4. mount -t xfs /dev/loop0 /home/test_dir/
5. mkdir /home/test_dir/test
6. mkfs.xfs -dfile,name=image,size=2g
7. mount -t xfs -o loop image /home/test_dir/test
8. cp a file bigger than 2g to /home/test_dir/test
9. mount -t xfs -o remount,ro /home/test_dir/test

[ dchinner: moved io error detection to xfs_setfilesize_ioend() after
  transaction context restoration. ]

[ nborisov: Adjusted context for 3.12 ]

Signed-off-by: Zhao Hongjiang &lt;zhaohongjiang@huawei.com&gt;
Signed-off-by: Dave Chinner &lt;david@fromorbit.com&gt;
Reviewed-by: Christoph Hellwig &lt;hch@lst.de&gt;
Signed-off-by: Nikolay Borisov &lt;nborisov@suse.com&gt;
Signed-off-by: Jiri Slaby &lt;jslaby@suse.cz&gt;
</content>
<content type='xhtml'>
<div xmlns='http://www.w3.org/1999/xhtml'>
<pre>
Commit 5cb13dcd0fac071b45c4bebe1801a08ff0d89cad upstream.

When I ran xfstest/073 case, the remount process was blocked to wait
transactions to be zero. I found there was a io error happened, and
the setfilesize transaction was not released properly. We should add
the changes to cancel the io error in this case.

Reproduction steps:
1. dd if=/dev/zero of=xfs1.img bs=1M count=2048
2. mkfs.xfs xfs1.img
3. losetup -f ./xfs1.img /dev/loop0
4. mount -t xfs /dev/loop0 /home/test_dir/
5. mkdir /home/test_dir/test
6. mkfs.xfs -dfile,name=image,size=2g
7. mount -t xfs -o loop image /home/test_dir/test
8. cp a file bigger than 2g to /home/test_dir/test
9. mount -t xfs -o remount,ro /home/test_dir/test

[ dchinner: moved io error detection to xfs_setfilesize_ioend() after
  transaction context restoration. ]

[ nborisov: Adjusted context for 3.12 ]

Signed-off-by: Zhao Hongjiang &lt;zhaohongjiang@huawei.com&gt;
Signed-off-by: Dave Chinner &lt;david@fromorbit.com&gt;
Reviewed-by: Christoph Hellwig &lt;hch@lst.de&gt;
Signed-off-by: Nikolay Borisov &lt;nborisov@suse.com&gt;
Signed-off-by: Jiri Slaby &lt;jslaby@suse.cz&gt;
</pre>
</div>
</content>
</entry>
<entry>
<title>xfs: pass total block res. as total xfs_bmapi_write() parameter</title>
<updated>2017-03-16T10:06:20+00:00</updated>
<author>
<name>Brian Foster</name>
<email>bfoster@redhat.com</email>
</author>
<published>2017-03-15T12:24:14+00:00</published>
<link rel='alternate' type='text/html' href='https://git.tavy.me/linux-stable.git/commit/?id=2d2888080cc0f811cd7c544a51e17f5214944baf'/>
<id>2d2888080cc0f811cd7c544a51e17f5214944baf</id>
<content type='text'>
commit dbd5c8c9a28899c6ca719eb21afc0afba9dd5574 upstream.

The total field from struct xfs_alloc_arg is a bit of an unknown
commodity. It is documented as the total block requirement for the
transaction and is used in this manner from most call sites by virtue of
passing the total block reservation of the transaction associated with
an allocation. Several xfs_bmapi_write() callers pass hardcoded values
of 0 or 1 for the total block requirement, which is a historical oddity
without any clear reasoning.

The xfs_iomap_write_direct() caller, for example, passes 0 for the total
block requirement. This has been determined to cause problems in the
form of ABBA deadlocks of AGF buffers due to incorrect AG selection in
the block allocator. Specifically, the xfs_alloc_space_available()
function incorrectly selects an AG that doesn't actually have sufficient
space for the allocation. This occurs because the args.total field is 0
and thus the remaining free space check on the AG doesn't actually
consider the size of the allocation request. This locks the AGF buffer,
the allocation attempt proceeds and ultimately fails (in
xfs_alloc_fix_minleft()), and xfs_alloc_vexent() moves on to the next
AG. In turn, this can lead to incorrect AG locking order (if the
allocator wraps around, attempting to lock AG 0 after acquiring AG N)
and thus deadlock if racing with another operation. This problem has
been reproduced via generic/299 on smallish (1GB) ramdisk test devices.

To avoid this problem, replace the undocumented hardcoded total
parameters from the iomap and utility callers to pass the block
reservation used for the associated transaction. This is consistent with
other xfs_bmapi_write() callers throughout XFS. The assumption is that
the total field allows the selection of an AG that can handle the entire
operation rather than simply the allocation/range being requested (e.g.,
resulting btree splits, etc.). This addresses the aforementioned
generic/299 hang by ensuring AG selection only occurs when the
allocation can be satisfied by the AG.

[nb] backport to 3.12

Reported-by: Ross Zwisler &lt;ross.zwisler@linux.intel.com&gt;
Signed-off-by: Brian Foster &lt;bfoster@redhat.com&gt;
Reviewed-by: Dave Chinner &lt;dchinner@redhat.com&gt;
Signed-off-by: Dave Chinner &lt;david@fromorbit.com&gt;
Signed-off-by: Nikolay Borisov &lt;nborisov@suse.com&gt;
Acked-by: Brian Foster &lt;bfoster@redhat.com&gt;
Signed-off-by: Jiri Slaby &lt;jslaby@suse.cz&gt;
</content>
<content type='xhtml'>
<div xmlns='http://www.w3.org/1999/xhtml'>
<pre>
commit dbd5c8c9a28899c6ca719eb21afc0afba9dd5574 upstream.

The total field from struct xfs_alloc_arg is a bit of an unknown
commodity. It is documented as the total block requirement for the
transaction and is used in this manner from most call sites by virtue of
passing the total block reservation of the transaction associated with
an allocation. Several xfs_bmapi_write() callers pass hardcoded values
of 0 or 1 for the total block requirement, which is a historical oddity
without any clear reasoning.

The xfs_iomap_write_direct() caller, for example, passes 0 for the total
block requirement. This has been determined to cause problems in the
form of ABBA deadlocks of AGF buffers due to incorrect AG selection in
the block allocator. Specifically, the xfs_alloc_space_available()
function incorrectly selects an AG that doesn't actually have sufficient
space for the allocation. This occurs because the args.total field is 0
and thus the remaining free space check on the AG doesn't actually
consider the size of the allocation request. This locks the AGF buffer,
the allocation attempt proceeds and ultimately fails (in
xfs_alloc_fix_minleft()), and xfs_alloc_vexent() moves on to the next
AG. In turn, this can lead to incorrect AG locking order (if the
allocator wraps around, attempting to lock AG 0 after acquiring AG N)
and thus deadlock if racing with another operation. This problem has
been reproduced via generic/299 on smallish (1GB) ramdisk test devices.

To avoid this problem, replace the undocumented hardcoded total
parameters from the iomap and utility callers to pass the block
reservation used for the associated transaction. This is consistent with
other xfs_bmapi_write() callers throughout XFS. The assumption is that
the total field allows the selection of an AG that can handle the entire
operation rather than simply the allocation/range being requested (e.g.,
resulting btree splits, etc.). This addresses the aforementioned
generic/299 hang by ensuring AG selection only occurs when the
allocation can be satisfied by the AG.

[nb] backport to 3.12

Reported-by: Ross Zwisler &lt;ross.zwisler@linux.intel.com&gt;
Signed-off-by: Brian Foster &lt;bfoster@redhat.com&gt;
Reviewed-by: Dave Chinner &lt;dchinner@redhat.com&gt;
Signed-off-by: Dave Chinner &lt;david@fromorbit.com&gt;
Signed-off-by: Nikolay Borisov &lt;nborisov@suse.com&gt;
Acked-by: Brian Foster &lt;bfoster@redhat.com&gt;
Signed-off-by: Jiri Slaby &lt;jslaby@suse.cz&gt;
</pre>
</div>
</content>
</entry>
<entry>
<title>fat: fix using uninitialized fields of fat_inode/fsinfo_inode</title>
<updated>2017-03-13T20:40:51+00:00</updated>
<author>
<name>OGAWA Hirofumi</name>
<email>hirofumi@mail.parknet.co.jp</email>
</author>
<published>2017-03-10T00:17:37+00:00</published>
<link rel='alternate' type='text/html' href='https://git.tavy.me/linux-stable.git/commit/?id=b944de66dbd13f80fdb3aa9e8c2d6ea486a10c68'/>
<id>b944de66dbd13f80fdb3aa9e8c2d6ea486a10c68</id>
<content type='text'>
commit c0d0e351285161a515396b7b1ee53ec9ffd97e3c upstream.

Recently fallocate patch was merged and it uses
MSDOS_I(inode)-&gt;mmu_private at fat_evict_inode().  However,
fat_inode/fsinfo_inode that was introduced in past didn't initialize
MSDOS_I(inode) properly.

With those combinations, it became the cause of accessing random entry
in FAT area.

Link: http://lkml.kernel.org/r/87pohrj4i8.fsf@mail.parknet.co.jp
Signed-off-by: OGAWA Hirofumi &lt;hirofumi@mail.parknet.co.jp&gt;
Reported-by: Moreno Bartalucci &lt;moreno.bartalucci@tecnorama.it&gt;
Tested-by: Moreno Bartalucci &lt;moreno.bartalucci@tecnorama.it&gt;
Signed-off-by: Andrew Morton &lt;akpm@linux-foundation.org&gt;
Signed-off-by: Linus Torvalds &lt;torvalds@linux-foundation.org&gt;
Signed-off-by: Jiri Slaby &lt;jslaby@suse.cz&gt;

</content>
<content type='xhtml'>
<div xmlns='http://www.w3.org/1999/xhtml'>
<pre>
commit c0d0e351285161a515396b7b1ee53ec9ffd97e3c upstream.

Recently fallocate patch was merged and it uses
MSDOS_I(inode)-&gt;mmu_private at fat_evict_inode().  However,
fat_inode/fsinfo_inode that was introduced in past didn't initialize
MSDOS_I(inode) properly.

With those combinations, it became the cause of accessing random entry
in FAT area.

Link: http://lkml.kernel.org/r/87pohrj4i8.fsf@mail.parknet.co.jp
Signed-off-by: OGAWA Hirofumi &lt;hirofumi@mail.parknet.co.jp&gt;
Reported-by: Moreno Bartalucci &lt;moreno.bartalucci@tecnorama.it&gt;
Tested-by: Moreno Bartalucci &lt;moreno.bartalucci@tecnorama.it&gt;
Signed-off-by: Andrew Morton &lt;akpm@linux-foundation.org&gt;
Signed-off-by: Linus Torvalds &lt;torvalds@linux-foundation.org&gt;
Signed-off-by: Jiri Slaby &lt;jslaby@suse.cz&gt;

</pre>
</div>
</content>
</entry>
<entry>
<title>NFSv4: fix getacl ERANGE for some ACL buffer sizes</title>
<updated>2017-03-13T20:40:38+00:00</updated>
<author>
<name>Weston Andros Adamson</name>
<email>dros@primarydata.com</email>
</author>
<published>2017-02-23T19:54:21+00:00</published>
<link rel='alternate' type='text/html' href='https://git.tavy.me/linux-stable.git/commit/?id=f4880e923d940840fd646890207c0fa749ea0864'/>
<id>f4880e923d940840fd646890207c0fa749ea0864</id>
<content type='text'>
commit ed92d8c137b7794c2c2aa14479298b9885967607 upstream.

We're not taking into account that the space needed for the (variable
length) attr bitmap, with the result that we'd sometimes get a spurious
ERANGE when the ACL data got close to the end of a page.

Just add in an extra page to make sure.

Signed-off-by: Weston Andros Adamson &lt;dros@primarydata.com&gt;
Signed-off-by: J. Bruce Fields &lt;bfields@redhat.com&gt;
Signed-off-by: Anna Schumaker &lt;Anna.Schumaker@Netapp.com&gt;
Signed-off-by: Jiri Slaby &lt;jslaby@suse.cz&gt;

</content>
<content type='xhtml'>
<div xmlns='http://www.w3.org/1999/xhtml'>
<pre>
commit ed92d8c137b7794c2c2aa14479298b9885967607 upstream.

We're not taking into account that the space needed for the (variable
length) attr bitmap, with the result that we'd sometimes get a spurious
ERANGE when the ACL data got close to the end of a page.

Just add in an extra page to make sure.

Signed-off-by: Weston Andros Adamson &lt;dros@primarydata.com&gt;
Signed-off-by: J. Bruce Fields &lt;bfields@redhat.com&gt;
Signed-off-by: Anna Schumaker &lt;Anna.Schumaker@Netapp.com&gt;
Signed-off-by: Jiri Slaby &lt;jslaby@suse.cz&gt;

</pre>
</div>
</content>
</entry>
<entry>
<title>NFSv4: fix getacl head length estimation</title>
<updated>2017-03-13T20:40:37+00:00</updated>
<author>
<name>J. Bruce Fields</name>
<email>bfields@redhat.com</email>
</author>
<published>2017-02-23T19:53:39+00:00</published>
<link rel='alternate' type='text/html' href='https://git.tavy.me/linux-stable.git/commit/?id=668a400e42817e53a203b7b7efafe9755ec4efa6'/>
<id>668a400e42817e53a203b7b7efafe9755ec4efa6</id>
<content type='text'>
commit 6682c14bbe505a8b912c57faf544f866777ee48d upstream.

Bitmap and attrlen follow immediately after the op reply header.  This
was an oversight from commit bf118a342f.

Consequences of this are just minor efficiency (extra calls to
xdr_shrink_bufhead).

Fixes: bf118a342f10 "NFSv4: include bitmap in nfsv4 get acl data"
Reviewed-by: Kinglong Mee &lt;kinglongmee@gmail.com&gt;
Signed-off-by: J. Bruce Fields &lt;bfields@redhat.com&gt;
Signed-off-by: Anna Schumaker &lt;Anna.Schumaker@Netapp.com&gt;
Signed-off-by: Jiri Slaby &lt;jslaby@suse.cz&gt;

</content>
<content type='xhtml'>
<div xmlns='http://www.w3.org/1999/xhtml'>
<pre>
commit 6682c14bbe505a8b912c57faf544f866777ee48d upstream.

Bitmap and attrlen follow immediately after the op reply header.  This
was an oversight from commit bf118a342f.

Consequences of this are just minor efficiency (extra calls to
xdr_shrink_bufhead).

Fixes: bf118a342f10 "NFSv4: include bitmap in nfsv4 get acl data"
Reviewed-by: Kinglong Mee &lt;kinglongmee@gmail.com&gt;
Signed-off-by: J. Bruce Fields &lt;bfields@redhat.com&gt;
Signed-off-by: Anna Schumaker &lt;Anna.Schumaker@Netapp.com&gt;
Signed-off-by: Jiri Slaby &lt;jslaby@suse.cz&gt;

</pre>
</div>
</content>
</entry>
<entry>
<title>NFSv4: Fix memory and state leak in _nfs4_open_and_get_state</title>
<updated>2017-03-13T20:40:36+00:00</updated>
<author>
<name>Trond Myklebust</name>
<email>trond.myklebust@primarydata.com</email>
</author>
<published>2017-02-08T16:29:46+00:00</published>
<link rel='alternate' type='text/html' href='https://git.tavy.me/linux-stable.git/commit/?id=9a9ea5d2f916183932b4f3ce2f6e21ccfd7ea08f'/>
<id>9a9ea5d2f916183932b4f3ce2f6e21ccfd7ea08f</id>
<content type='text'>
commit a974deee477af89411e0f80456bfb344ac433c98 upstream.

If we exit because the file access check failed, we currently
leak the struct nfs4_state. We need to attach it to the
open context before returning.

Fixes: 3efb9722475e ("NFSv4: Refactor _nfs4_open_and_get_state..")
Signed-off-by: Trond Myklebust &lt;trond.myklebust@primarydata.com&gt;
Signed-off-by: Anna Schumaker &lt;Anna.Schumaker@Netapp.com&gt;
Signed-off-by: Jiri Slaby &lt;jslaby@suse.cz&gt;

</content>
<content type='xhtml'>
<div xmlns='http://www.w3.org/1999/xhtml'>
<pre>
commit a974deee477af89411e0f80456bfb344ac433c98 upstream.

If we exit because the file access check failed, we currently
leak the struct nfs4_state. We need to attach it to the
open context before returning.

Fixes: 3efb9722475e ("NFSv4: Refactor _nfs4_open_and_get_state..")
Signed-off-by: Trond Myklebust &lt;trond.myklebust@primarydata.com&gt;
Signed-off-by: Anna Schumaker &lt;Anna.Schumaker@Netapp.com&gt;
Signed-off-by: Jiri Slaby &lt;jslaby@suse.cz&gt;

</pre>
</div>
</content>
</entry>
</feed>
