linux-stable.git/fs, branch v3.0.28

lockd: fix arg parsing for grace_period and timeout.

2012-04-02T16:27:21+00:00

commit de5b8e8e047534aac6bc9803f96e7257436aef9c upstream.

If you try to set grace_period or timeout via a module parameter
to lockd, and do this on a big-endian machine where

   sizeof(int) != sizeof(unsigned long)

it won't work.  This number given will be effectively shifted right
by the difference in those two sizes.

So cast kp->arg properly to get correct result.

Signed-off-by: NeilBrown 
Signed-off-by: J. Bruce Fields 
Signed-off-by: Greg Kroah-Hartman

xfs: Fix oops on IO error during xlog_recover_process_iunlinks()

2012-04-02T16:27:20+00:00

commit d97d32edcd732110758799ae60af725e5110b3dc upstream.

When an IO error happens during inode deletion run from
xlog_recover_process_iunlinks() filesystem gets shutdown. Thus any subsequent
attempt to read buffers fails. Code in xlog_recover_process_iunlinks() does not
count with the fact that read of a buffer which was read a while ago can
really fail which results in the oops on
  agi = XFS_BUF_TO_AGI(agibp);

Fix the problem by cleaning up the buffer handling in
xlog_recover_process_iunlinks() as suggested by Dave Chinner. We release buffer
lock but keep buffer reference to AG buffer. That is enough for buffer to stay
pinned in memory and we don't have to call xfs_read_agi() all the time.

Signed-off-by: Jan Kara 
Reviewed-by: Dave Chinner 
Signed-off-by: Ben Myers 
Signed-off-by: Greg Kroah-Hartman

udf: Fix deadlock in udf_release_file()

2012-04-02T16:27:19+00:00

commit a0391a3ae91d301c0e59368531a4de5f0b122bcf upstream.

udf_release_file() can be called from munmap() path with mmap_sem held.  Thus
we cannot take i_mutex there because that ranks above mmap_sem. Luckily,
i_mutex is not needed in udf_release_file() anymore since protection by
i_data_sem is enough to protect from races with write and truncate.

Reported-by: Al Viro 
Reviewed-by: Namjae Jeon 
Signed-off-by: Jan Kara 
Signed-off-by: Greg Kroah-Hartman

vfs: fix d_ancestor() case in d_materialize_unique

2012-04-02T16:27:19+00:00

commit b18dafc86bb879d2f38a1743985d7ceb283c2f4d upstream.

In d_materialise_unique() there are 3 subcases to the 'aliased dentry'
case; in two subcases the inode i_lock is properly released but this
does not occur in the -ELOOP subcase.

This seems to have been introduced by commit 1836750115f2 ("fix loop
checks in d_materialise_unique()").

Signed-off-by: Michel Lespinasse 
[ Added a comment, and moved the unlock to where we generate the -ELOOP,
  which seems to be more natural.

  You probably can't actually trigger this without a buggy network file
  server - d_materialize_unique() is for finding aliases on non-local
  filesystems, and the d_ancestor() case is for a hardlinked directory
  loop.

  But we should be robust in the case of such buggy servers anyway. ]
Signed-off-by: Linus Torvalds 
Signed-off-by: Greg Kroah-Hartman

ext4: check for zero length extent

2012-04-02T16:27:19+00:00

commit 31d4f3a2f3c73f279ff96a7135d7202ef6833f12 upstream.

Explicitly test for an extent whose length is zero, and flag that as a
corrupted extent.

This avoids a kernel BUG_ON assertion failure.

Tested: Without this patch, the file system image found in
tests/f_ext_zero_len/image.gz in the latest e2fsprogs sources causes a
kernel panic.  With this patch, an ext4 file system error is noted
instead, and the file system is marked as being corrupted.

https://bugzilla.kernel.org/show_bug.cgi?id=42859

Signed-off-by: "Theodore Ts'o" 
Signed-off-by: Greg Kroah-Hartman

ext4: ignore EXT4_INODE_JOURNAL_DATA flag with delalloc

2012-04-02T16:27:19+00:00

commit 3d2b158262826e8b75bbbfb7b97010838dd92ac7 upstream.

Ext4 does not support data journalling with delayed allocation enabled.
We even do not allow to mount the file system with delayed allocation
and data journalling enabled, however it can be set via FS_IOC_SETFLAGS
so we can hit the inode with EXT4_INODE_JOURNAL_DATA set even on file
system mounted with delayed allocation (default) and that's where
problem arises. The easies way to reproduce this problem is with the
following set of commands:

 mkfs.ext4 /dev/sdd
 mount /dev/sdd /mnt/test1
 dd if=/dev/zero of=/mnt/test1/file bs=1M count=4
 chattr +j /mnt/test1/file
 dd if=/dev/zero of=/mnt/test1/file bs=1M count=4 conv=notrunc
 chattr -j /mnt/test1/file

Additionally it can be reproduced quite reliably with xfstests 272 and
269. In fact the above reproducer is a part of test 272.

To fix this we should ignore the EXT4_INODE_JOURNAL_DATA inode flag if
the file system is mounted with delayed allocation. This can be easily
done by fixing ext4_should_*_data() functions do ignore data journal
flag when delalloc is set (suggested by Ted). We also have to set the
appropriate address space operations for the inode (again, ignoring data
journal flag if delalloc enabled).

Additionally this commit introduces ext4_inode_journal_mode() function
because ext4_should_*_data() has already had a lot of common code and
this change is putting it all into one function so it is easier to
read.

Successfully tested with xfstests in following configurations:

delalloc + data=ordered
delalloc + data=writeback
data=journal
nodelalloc + data=ordered
nodelalloc + data=writeback
nodelalloc + data=journal

Signed-off-by: Lukas Czerner 
Signed-off-by: "Theodore Ts'o" 
Signed-off-by: Greg Kroah-Hartman

jbd2: clear BH_Delay & BH_Unwritten in journal_unmap_buffer

2012-04-02T16:27:18+00:00

commit 15291164b22a357cb211b618adfef4fa82fc0de3 upstream.

journal_unmap_buffer()'s zap_buffer: code clears a lot of buffer head
state ala discard_buffer(), but does not touch _Delay or _Unwritten as
discard_buffer() does.

This can be problematic in some areas of the ext4 code which assume
that if they have found a buffer marked unwritten or delay, then it's
a live one.  Perhaps those spots should check whether it is mapped
as well, but if jbd2 is going to tear down a buffer, let's really
tear it down completely.

Without this I get some fsx failures on sub-page-block filesystems
up until v3.2, at which point 4e96b2dbbf1d7e81f22047a50f862555a6cb87cb
and 189e868fa8fdca702eb9db9d8afc46b5cb9144c9 make the failures go
away, because buried within that large change is some more flag
clearing.  I still think it's worth doing in jbd2, since
->invalidatepage leads here directly, and it's the right place
to clear away these flags.

Signed-off-by: Eric Sandeen 
Signed-off-by: "Theodore Ts'o" 
Signed-off-by: Greg Kroah-Hartman

ext4: flush any pending end_io requests before DIO reads w/dioread_nolock

2012-04-02T16:27:18+00:00

commit dccaf33fa37a1bc5d651baeb3bfeb6becb86597b upstream.

(backported to 3.0 by mjt)

There is a race between ext4 buffer write and direct_IO read with
dioread_nolock mount option enabled. The problem is that we clear
PageWriteback flag during end_io time but will do
uninitialized-to-initialized extent conversion later with dioread_nolock.
If an O_direct read request comes in during this period, ext4 will return
zero instead of the recently written data.

This patch checks whether there are any pending uninitialized-to-initialized
extent conversion requests before doing O_direct read to close the race.
Note that this is just a bandaid fix. The fundamental issue is that we
clear PageWriteback flag before we really complete an IO, which is
problem-prone. To fix the fundamental issue, we may need to implement an
extent tree cache that we can use to look up pending to-be-converted extents.

Signed-off-by: Jiaying Zhang 
Signed-off-by: "Theodore Ts'o" 
Cc: Jan Kara 
Signed-off-by: Michael Tokarev 
Signed-off-by: Greg Kroah-Hartman

proc-ns: use d_set_d_op() API to set dentry ops in proc_ns_instantiate().

2012-04-02T16:27:18+00:00

commit 1b26c9b334044cff6d1d2698f2be41bc7d9a0864 upstream.

The namespace cleanup path leaks a dentry which holds a reference count
on a network namespace.  Keeping that network namespace from being freed
when the last user goes away.  Leaving things like vlan devices in the
leaked network namespace.

If you use ip netns add for much real work this problem becomes apparent
pretty quickly.  It light testing the problem hides because frequently
you simply don't notice the leak.

Use d_set_d_op() so that DCACHE_OP_* flags are set correctly.

This issue exists back to 3.0.

Acked-by: "Eric W. Biederman" 
Reported-by: Justin Pettit 
Signed-off-by: Pravin B Shelar 
Signed-off-by: Jesse Gross 
Cc: David Miller 
Signed-off-by: Andrew Morton 
Signed-off-by: Linus Torvalds 
Signed-off-by: Greg Kroah-Hartman

cifs: fix issue mounting of DFS ROOT when redirecting from one domain controller to the next

2012-04-02T16:27:17+00:00

commit 1daaae8fa4afe3df78ca34e724ed7e8187e4eb32 upstream.

This patch fixes an issue when cifs_mount receives a
STATUS_BAD_NETWORK_NAME error during cifs_get_tcon but is able to
continue after an DFS ROOT referral. In this case, the return code
variable is not reset prior to trying to mount from the system referred
to. Thus, is_path_accessible is not executed and the final DFS referral
is not performed causing a mount error.

Use case: In DNS, example.com  resolves to the secondary AD server
ad2.example.com Our primary domain controller is ad1.example.com and has
a DFS redirection set up from \\ad1\share\Users to \\files\share\Users.
Mounting \\example.com\share\Users fails.

Regression introduced by commit 724d9f1.

Reviewed-by: Pavel Shilovsky 
Signed-off-by: Jeff Layton 
Signed-off-by: Steve French 
Signed-off-by: Greg Kroah-Hartman