linux-stable.git/fs, branch v3.0.14

fuse: fix fuse_retrieve

2011-12-21T20:57:44+00:00

commit 48706d0a91583d08c56e7ef2a7602d99c8d4133f upstream.

Fix two bugs in fuse_retrieve():

 - retrieving more than one page would yield repeated instances of the
   first page

 - if more than FUSE_MAX_PAGES_PER_REQ pages were requested than the
   request page array would overflow

fuse_retrieve() was added in 2.6.36 and these bugs had been there since the
beginning.

Signed-off-by: Miklos Szeredi 
Signed-off-by: Greg Kroah-Hartman

ext4: handle EOF correctly in ext4_bio_write_page()

2011-12-21T20:57:44+00:00

commit 5a0dc7365c240795bf190766eba7a27600be3b3e upstream.

We need to zero out part of a page which beyond EOF before setting uptodate,
otherwise, mapread or write will see non-zero data beyond EOF.

Signed-off-by: Yongqiang Yang 
Signed-off-by: "Theodore Ts'o" 
Signed-off-by: Greg Kroah-Hartman

ext4: avoid potential hang in mpage_submit_io() when blocksize < pagesize

2011-12-21T20:57:44+00:00

commit 13a79a4741d37fda2fbafb953f0f301dc007928f upstream.

If there is an unwritten but clean buffer in a page and there is a
dirty buffer after the buffer, then mpage_submit_io does not write the
dirty buffer out.  As a result, da_writepages loops forever.

This patch fixes the problem by checking dirty flag.

Signed-off-by: Yongqiang Yang 
Signed-off-by: "Theodore Ts'o" 
Signed-off-by: Greg Kroah-Hartman

ext4: avoid hangs in ext4_da_should_update_i_disksize()

2011-12-21T20:57:44+00:00

commit ea51d132dbf9b00063169c1159bee253d9649224 upstream.

If the pte mapping in generic_perform_write() is unmapped between
iov_iter_fault_in_readable() and iov_iter_copy_from_user_atomic(), the
"copied" parameter to ->end_write can be zero. ext4 couldn't cope with
it with delayed allocations enabled. This skips the i_disksize
enlargement logic if copied is zero and no new data was appeneded to
the inode.

 gdb> bt
 #0  0xffffffff811afe80 in ext4_da_should_update_i_disksize (file=0xffff88003f606a80, mapping=0xffff88001d3824e0, pos=0x1\
 08000, len=0x1000, copied=0x0, page=0xffffea0000d792e8, fsdata=0x0) at fs/ext4/inode.c:2467
 #1  ext4_da_write_end (file=0xffff88003f606a80, mapping=0xffff88001d3824e0, pos=0x108000, len=0x1000, copied=0x0, page=0\
 xffffea0000d792e8, fsdata=0x0) at fs/ext4/inode.c:2512
 #2  0xffffffff810d97f1 in generic_perform_write (iocb=, iov=, nr_segs=, pos=0x108000, ppos=0xffff88001e26be40, count=, written=0x0) at mm/filemap.c:2440
 #3  generic_file_buffered_write (iocb=, iov=, nr_segs=, p\
 os=0x108000, ppos=0xffff88001e26be40, count=, written=0x0) at mm/filemap.c:2482
 #4  0xffffffff810db5d1 in __generic_file_aio_write (iocb=0xffff88001e26bde8, iov=0xffff88001e26bec8, nr_segs=0x1, ppos=0\
 xffff88001e26be40) at mm/filemap.c:2600
 #5  0xffffffff810db853 in generic_file_aio_write (iocb=0xffff88001e26bde8, iov=0xffff88001e26bec8, nr_segs=, pos=) at mm/filemap.c:2632
 #6  0xffffffff811a71aa in ext4_file_write (iocb=0xffff88001e26bde8, iov=0xffff88001e26bec8, nr_segs=0x1, pos=0x108000) a\
 t fs/ext4/file.c:136
 #7  0xffffffff811375aa in do_sync_write (filp=0xffff88003f606a80, buf=, len=, \
 ppos=0xffff88001e26bf48) at fs/read_write.c:406
 #8  0xffffffff81137e56 in vfs_write (file=0xffff88003f606a80, buf=0x1ec2960 , count=0x4\
 000, pos=0xffff88001e26bf48) at fs/read_write.c:435
 #9  0xffffffff8113816c in sys_write (fd=, buf=0x1ec2960 , count=0x\
 4000) at fs/read_write.c:487
 #10 
 #11 0x00007f120077a390 in __brk_reservation_fn_dmi_alloc__ ()
 #12 0x0000000000000000 in ?? ()
 gdb> print offset
 $22 = 0xffffffffffffffff
 gdb> print idx
 $23 = 0xffffffff
 gdb> print inode->i_blkbits
 $24 = 0xc
 gdb> up
 #1  ext4_da_write_end (file=0xffff88003f606a80, mapping=0xffff88001d3824e0, pos=0x108000, len=0x1000, copied=0x0, page=0\
 xffffea0000d792e8, fsdata=0x0) at fs/ext4/inode.c:2512
 2512                    if (ext4_da_should_update_i_disksize(page, end)) {
 gdb> print start
 $25 = 0x0
 gdb> print end
 $26 = 0xffffffffffffffff
 gdb> print pos
 $27 = 0x108000
 gdb> print new_i_size
 $28 = 0x108000
 gdb> print ((struct ext4_inode_info *)((char *)inode-((int)(&((struct ext4_inode_info *)0)->vfs_inode))))->i_disksize
 $29 = 0xd9000
 gdb> down
 2467            for (i = 0; i < idx; i++)
 gdb> print i
 $30 = 0xd44acbee

This is 100% reproducible with some autonuma development code tuned in
a very aggressive manner (not normal way even for knumad) which does
"exotic" changes to the ptes. It wouldn't normally trigger but I don't
see why it can't happen normally if the page is added to swap cache in
between the two faults leading to "copied" being zero (which then
hangs in ext4). So it should be fixed. Especially possible with lumpy
reclaim (albeit disabled if compaction is enabled) as that would
ignore the young bits in the ptes.

Signed-off-by: Andrea Arcangeli 
Signed-off-by: "Theodore Ts'o" 
Signed-off-by: Greg Kroah-Hartman

ext4: display the correct mount option in /proc/mounts for [no]init_itable

2011-12-21T20:57:43+00:00

commit fc6cb1cda5db7b2d24bf32890826214b857c728e upstream.

/proc/mounts was showing the mount option [no]init_inode_table when
the correct mount option that will be accepted by parse_options() is
[no]init_itable.

Signed-off-by: "Theodore Ts'o" 
Signed-off-by: Greg Kroah-Hartman

xfs: avoid synchronous transactions when deleting attr blocks

2011-12-21T20:57:42+00:00

commit 859f57ca00805e6c482eef1a7ab073097d02c8ca upstream.

[slightly different from the upstream version because of a previous cleanup]

Currently xfs_attr_inactive causes a synchronous transactions if we are
removing a file that has any extents allocated to the attribute fork, and
thus makes XFS extremely slow at removing files with out of line extended
attributes. The code looks a like a relict from the days before the busy
extent list, but with the busy extent list we avoid reusing data and attr
extents that have been freed but not commited yet, so this code is just
as superflous as the synchronous transactions for data blocks.

Signed-off-by: Christoph Hellwig 
Reported-by: Bernd Schubert 
Reviewed-by: Dave Chinner 
Signed-off-by: Alex Elder 
Signed-off-by: Greg Kroah-Hartman

xfs: fix nfs export of 64-bit inodes numbers on 32-bit kernels

2011-12-21T20:57:41+00:00

commit c29f7d457ac63311feb11928a866efd2fe153d74 upstream.

The i_ino field in the VFS inode is of type unsigned long and thus can't
hold the full 64-bit inode number on 32-bit kernels.  We have the full
inode number in the XFS inode, so use that one for nfs exports.  Note
that I've also switched the 32-bit file handles types to it, just to make
the code more consistent and copy & paste errors less likely to happen.

Reported-by: Guoquan Yang 
Reported-by: Hank Peng 
Signed-off-by: Christoph Hellwig 
Signed-off-by: Ben Myers 
Signed-off-by: Greg Kroah-Hartman

hfs: fix hfs_find_init() sb->ext_tree NULL ptr oops

2011-12-21T20:57:41+00:00

commit 434a964daa14b9db083ce20404a4a2add54d037a upstream.

Clement Lecigne reports a filesystem which causes a kernel oops in
hfs_find_init() trying to dereference sb->ext_tree which is NULL.

This proves to be because the filesystem has a corrupted MDB extent
record, where the extents file does not fit into the first three extents
in the file record (the first blocks).

In hfs_get_block() when looking up the blocks for the extent file
(HFS_EXT_CNID), it fails the first blocks special case, and falls
through to the extent code (which ultimately calls hfs_find_init())
which is in the process of being initialised.

Hfs avoids this scenario by always having the extents b-tree fitting
into the first blocks (the extents B-tree can't have overflow extents).

The fix is to check at mount time that the B-tree fits into first
blocks, i.e.  fail if HFS_I(inode)->alloc_blocks >=
HFS_I(inode)->first_blocks

Note, the existing commit 47f365eb57573 ("hfs: fix oops on mount with
corrupted btree extent records") becomes subsumed into this as a special
case, but only for the extents B-tree (HFS_EXT_CNID), it is perfectly
acceptable for the catalog B-Tree file to grow beyond three extents,
with the remaining extent descriptors in the extents overfow.

This fixes CVE-2011-2203

Reported-by: Clement LECIGNE 
Signed-off-by: Phillip Lougher 
Cc: Jeff Mahoney 
Cc: Christoph Hellwig 
Signed-off-by: Andrew Morton 
Signed-off-by: Linus Torvalds 
Cc: Moritz Mühlenhoff 
Signed-off-by: Greg Kroah-Hartman

jbd/jbd2: validate sb->s_first in journal_get_superblock()

2011-12-21T20:57:40+00:00

commit 8762202dd0d6e46854f786bdb6fb3780a1625efe upstream.

I hit a J_ASSERT(blocknr != 0) failure in cleanup_journal_tail() when
mounting a fsfuzzed ext3 image. It turns out that the corrupted ext3
image has s_first = 0 in journal superblock, and the 0 is passed to
journal->j_head in journal_reset(), then to blocknr in
cleanup_journal_tail(), in the end the J_ASSERT failed.

So validate s_first after reading journal superblock from disk in
journal_get_superblock() to ensure s_first is valid.

The following script could reproduce it:

fstype=ext3
blocksize=1024
img=$fstype.img
offset=0
found=0
magic="c0 3b 39 98"

dd if=/dev/zero of=$img bs=1M count=8
mkfs -t $fstype -b $blocksize -F $img
filesize=`stat -c %s $img`
while [ $offset -lt $filesize ]
do
        if od -j $offset -N 4 -t x1 $img | grep -i "$magic";then
                echo "Found journal: $offset"
                found=1
                break
        fi
        offset=`echo "$offset+$blocksize" | bc`
done

if [ $found -ne 1 ];then
        echo "Magic \"$magic\" not found"
        exit 1
fi

dd if=/dev/zero of=$img seek=$(($offset+23)) conv=notrunc bs=1 count=1

mkdir -p ./mnt
mount -o loop $img ./mnt

Cc: Jan Kara 
Signed-off-by: Eryu Guan 
Signed-off-by: "Theodore Ts'o" 
Cc: Moritz Mühlenhoff 
Signed-off-by: Greg Kroah-Hartman

fix apparmor dereferencing potentially freed dentry, sanitize __d_path() API

2011-12-21T20:57:36+00:00

commit 02125a826459a6ad142f8d91c5b6357562f96615 upstream.

__d_path() API is asking for trouble and in case of apparmor d_namespace_path()
getting just that.  The root cause is that when __d_path() misses the root
it had been told to look for, it stores the location of the most remote ancestor
in *root.  Without grabbing references.  Sure, at the moment of call it had
been pinned down by what we have in *path.  And if we raced with umount -l, we
could have very well stopped at vfsmount/dentry that got freed as soon as
prepend_path() dropped vfsmount_lock.

It is safe to compare these pointers with pre-existing (and known to be still
alive) vfsmount and dentry, as long as all we are asking is "is it the same
address?".  Dereferencing is not safe and apparmor ended up stepping into
that.  d_namespace_path() really wants to examine the place where we stopped,
even if it's not connected to our namespace.  As the result, it looked
at ->d_sb->s_magic of a dentry that might've been already freed by that point.
All other callers had been careful enough to avoid that, but it's really
a bad interface - it invites that kind of trouble.

The fix is fairly straightforward, even though it's bigger than I'd like:
	* prepend_path() root argument becomes const.
	* __d_path() is never called with NULL/NULL root.  It was a kludge
to start with.  Instead, we have an explicit function - d_absolute_root().
Same as __d_path(), except that it doesn't get root passed and stops where
it stops.  apparmor and tomoyo are using it.
	* __d_path() returns NULL on path outside of root.  The main
caller is show_mountinfo() and that's precisely what we pass root for - to
skip those outside chroot jail.  Those who don't want that can (and do)
use d_path().
	* __d_path() root argument becomes const.  Everyone agrees, I hope.
	* apparmor does *NOT* try to use __d_path() or any of its variants
when it sees that path->mnt is an internal vfsmount.  In that case it's
definitely not mounted anywhere and dentry_path() is exactly what we want
there.  Handling of sysctl()-triggered weirdness is moved to that place.
	* if apparmor is asked to do pathname relative to chroot jail
and __d_path() tells it we it's not in that jail, the sucker just calls
d_absolute_path() instead.  That's the other remaining caller of __d_path(),
BTW.
        * seq_path_root() does _NOT_ return -ENAMETOOLONG (it's stupid anyway -
the normal seq_file logics will take care of growing the buffer and redoing
the call of ->show() just fine).  However, if it gets path not reachable
from root, it returns SEQ_SKIP.  The only caller adjusted (i.e. stopped
ignoring the return value as it used to do).

Reviewed-by: John Johansen 
ACKed-by: John Johansen 
Signed-off-by: Al Viro 
Signed-off-by: Greg Kroah-Hartman