linux-stable.git/fs/xfs, branch v3.2.89

xfs: fix up xfs_swap_extent_forks inline extent handling

2017-03-16T02:18:24+00:00

commit 4dfce57db6354603641132fac3c887614e3ebe81 upstream.

There have been several reports over the years of NULL pointer
dereferences in xfs_trans_log_inode during xfs_fsr processes,
when the process is doing an fput and tearing down extents
on the temporary inode, something like:

BUG: unable to handle kernel NULL pointer dereference at 0000000000000018
PID: 29439  TASK: ffff880550584fa0  CPU: 6   COMMAND: "xfs_fsr"
    [exception RIP: xfs_trans_log_inode+0x10]
 #9 [ffff8800a57bbbe0] xfs_bunmapi at ffffffffa037398e [xfs]
#10 [ffff8800a57bbce8] xfs_itruncate_extents at ffffffffa0391b29 [xfs]
#11 [ffff8800a57bbd88] xfs_inactive_truncate at ffffffffa0391d0c [xfs]
#12 [ffff8800a57bbdb8] xfs_inactive at ffffffffa0392508 [xfs]
#13 [ffff8800a57bbdd8] xfs_fs_evict_inode at ffffffffa035907e [xfs]
#14 [ffff8800a57bbe00] evict at ffffffff811e1b67
#15 [ffff8800a57bbe28] iput at ffffffff811e23a5
#16 [ffff8800a57bbe58] dentry_kill at ffffffff811dcfc8
#17 [ffff8800a57bbe88] dput at ffffffff811dd06c
#18 [ffff8800a57bbea8] __fput at ffffffff811c823b
#19 [ffff8800a57bbef0] ____fput at ffffffff811c846e
#20 [ffff8800a57bbf00] task_work_run at ffffffff81093b27
#21 [ffff8800a57bbf30] do_notify_resume at ffffffff81013b0c
#22 [ffff8800a57bbf50] int_signal at ffffffff8161405d

As it turns out, this is because the i_itemp pointer, along
with the d_ops pointer, has been overwritten with zeros
when we tear down the extents during truncate.  When the in-core
inode fork on the temporary inode used by xfs_fsr was originally
set up during the extent swap, we mistakenly looked at di_nextents
to determine whether all extents fit inline, but this misses extents
generated by speculative preallocation; we should be using if_bytes
instead.

This mistake corrupts the in-memory inode, and code in
xfs_iext_remove_inline eventually gets bad inputs, causing
it to memmove and memset incorrect ranges; this became apparent
because the two values in ifp->if_u2.if_inline_ext[1] contained
what should have been in d_ops and i_itemp; they were memmoved due
to incorrect array indexing and then the original locations
were zeroed with memset, again due to an array overrun.

Fix this by properly using i_df.if_bytes to determine the number
of extents, not di_nextents.

Thanks to dchinner for looking at this with me and spotting the
root cause.

Signed-off-by: Eric Sandeen 
Reviewed-by: Brian Foster 
Signed-off-by: Dave Chinner 
[bwh: Backported to 3.2: adjust filename, indentation]
Signed-off-by: Ben Hutchings

posix_acl: Clear SGID bit when setting file permissions

2016-11-20T01:01:44+00:00

commit 073931017b49d9458aa351605b43a7e34598caef upstream.

When file permissions are modified via chmod(2) and the user is not in
the owning group or capable of CAP_FSETID, the setgid bit is cleared in
inode_change_ok().  Setting a POSIX ACL via setxattr(2) sets the file
permissions as well as the new ACL, but doesn't clear the setgid bit in
a similar way; this allows to bypass the check in chmod(2).  Fix that.

References: CVE-2016-7097
Reviewed-by: Christoph Hellwig 
Reviewed-by: Jeff Layton 
Signed-off-by: Jan Kara 
Signed-off-by: Andreas Gruenbacher 
[bwh: Backported to 3.2:
 - Drop changes to ceph, f2fs, hfsplus, orangefs
 - Use capable() instead of capable_wrt_inode_uidgid()
 - Update ext3 and generic_acl.c as well
 - In gfs2, jfs, and xfs, take care to avoid leaking the allocated ACL if
   posix_acl_update_mode() determines it's not needed
 - Adjust context]
Signed-off-by: Ben Hutchings

fs: Give dentry to inode_change_ok() instead of inode

2016-11-20T01:01:43+00:00

commit 31051c85b5e2aaaf6315f74c72a732673632a905 upstream.

inode_change_ok() will be resposible for clearing capabilities and IMA
extended attributes and as such will need dentry. Give it as an argument
to inode_change_ok() instead of an inode. Also rename inode_change_ok()
to setattr_prepare() to better relect that it does also some
modifications in addition to checks.

Reviewed-by: Christoph Hellwig 
Signed-off-by: Jan Kara 
[bwh: Backported to 3.2:
 - Drop changes to f2fs, lustre, orangefs, overlayfs
 - Adjust filenames, context
 - In nfsd, pass dentry to nfsd_sanitize_attrs()
 - In xfs, pass dentry to xfs_change_file_space(), xfs_set_mode(),
   xfs_setattr_nonsize(), and xfs_setattr_size()
 - Update ext3 as well
 - Mark pohmelfs as BROKEN; it's long dead upstream]
Signed-off-by: Ben Hutchings

xfs: fix two memory leaks in xfs_attr_list.c error paths

2016-04-30T22:05:16+00:00

commit 2e83b79b2d6c78bf1b4aa227938a214dcbddc83f upstream.

This plugs 2 trivial leaks in xfs_attr_shortform_list and
xfs_attr3_leaf_list_int.

Signed-off-by: Mateusz Guzik 
Reviewed-by: Eric Sandeen 
Signed-off-by: Dave Chinner 
[bwh: Backported to 3.2: adjust filename]
Signed-off-by: Ben Hutchings

fs: create and use seq_show_option for escaping

2015-10-13T02:46:08+00:00

commit a068acf2ee77693e0bf39d6e07139ba704f461c3 upstream.

Many file systems that implement the show_options hook fail to correctly
escape their output which could lead to unescaped characters (e.g.  new
lines) leaking into /proc/mounts and /proc/[pid]/mountinfo files.  This
could lead to confusion, spoofed entries (resulting in things like
systemd issuing false d-bus "mount" notifications), and who knows what
else.  This looks like it would only be the root user stepping on
themselves, but it's possible weird things could happen in containers or
in other situations with delegated mount privileges.

Here's an example using overlay with setuid fusermount trusting the
contents of /proc/mounts (via the /etc/mtab symlink).  Imagine the use
of "sudo" is something more sneaky:

  $ BASE="ovl"
  $ MNT="$BASE/mnt"
  $ LOW="$BASE/lower"
  $ UP="$BASE/upper"
  $ WORK="$BASE/work/ 0 0
  none /proc fuse.pwn user_id=1000"
  $ mkdir -p "$LOW" "$UP" "$WORK"
  $ sudo mount -t overlay -o "lowerdir=$LOW,upperdir=$UP,workdir=$WORK" none /mnt
  $ cat /proc/mounts
  none /root/ovl/mnt overlay rw,relatime,lowerdir=ovl/lower,upperdir=ovl/upper,workdir=ovl/work/ 0 0
  none /proc fuse.pwn user_id=1000 0 0
  $ fusermount -u /proc
  $ cat /proc/mounts
  cat: /proc/mounts: No such file or directory

This fixes the problem by adding new seq_show_option and
seq_show_option_n helpers, and updating the vulnerable show_option
handlers to use them as needed.  Some, like SELinux, need to be open
coded due to unusual existing escape mechanisms.

[akpm@linux-foundation.org: add lost chunk, per Kees]
[keescook@chromium.org: seq_show_option should be using const parameters]
Signed-off-by: Kees Cook 
Acked-by: Serge Hallyn 
Acked-by: Jan Kara 
Acked-by: Paul Moore 
Cc: J. R. Okajima 
Signed-off-by: Kees Cook 
Signed-off-by: Andrew Morton 
Signed-off-by: Linus Torvalds 
[bwh: Backported to 3.2:
 - Drop changes to overlayfs, reiserfs
 - Drop vers option from cifs
 - ceph changes are all in one file
 - Adjust context]
Signed-off-by: Ben Hutchings

xfs: return errors from partial I/O failures to files

2015-10-13T02:46:07+00:00

commit c9eb256eda4420c06bb10f5e8fbdbe1a34bc98e0 upstream.

There is an issue with xfs's error reporting in some cases of I/O partially
failing and partially succeeding. Calls like fsync() can report success even
though not all I/O was successful in partial-failure cases such as one disk of
a RAID0 array being offline.

The issue can occur when there are more than one bio per xfs_ioend struct.
Each call to xfs_end_bio() for a bio completing will write a value to
ioend->io_error.  If a successful bio completes after any failed bio, no
error is reported do to it writing 0 over the error code set by any failed bio.
The I/O error information is now lost and when the ioend is completed
only success is reported back up the filesystem stack.

xfs_end_bio() should only set ioend->io_error in the case of BIO_UPTODATE
being clear.  ioend->io_error is initialized to 0 at allocation so only needs
to be updated by a failed bio. Also check that ioend->io_error is 0 so that
the first error reported will be the error code returned.

Signed-off-by: David Jeffery 
Reviewed-by: Dave Chinner 
Signed-off-by: Dave Chinner 
[bwh: Backported to 3.2: adjust context]
Signed-off-by: Ben Hutchings

xfs: Fix xfs_attr_leafblock definition

2015-10-13T02:46:06+00:00

commit ffeecc5213024ae663377b442eedcfbacf6d0c5d upstream.

struct xfs_attr_leafblock contains 'entries' array which is declared
with size 1 altough it can in fact contain much more entries. Since this
array is followed by further struct members, gcc (at least in version
4.8.3) thinks that the array has the fixed size of 1 element and thus
may optimize away all accesses beyond the end of array resulting in
non-working code. This problem was only observed with userspace code in
xfsprogs, however it's better to be safe in kernel as well and have
matching kernel and xfsprogs definitions.

Signed-off-by: Jan Kara 
Reviewed-by: Dave Chinner 
Signed-off-by: Dave Chinner 
[bwh: Backported to 3.2: adjust filename]
Signed-off-by: Ben Hutchings

xfs: ensure truncate forces zeroed blocks to disk

2015-05-09T22:16:20+00:00

commit 5885ebda878b47c4b4602d4b0410cb4b282af024 upstream.

A new fsync vs power fail test in xfstests indicated that XFS can
have unreliable data consistency when doing extending truncates that
require block zeroing. The blocks beyond EOF get zeroed in memory,
but we never force those changes to disk before we run the
transaction that extends the file size and exposes those blocks to
userspace. This can result in the blocks not being correctly zeroed
after a crash.

Because in-memory behaviour is correct, tools like fsx don't pick up
any coherency problems - it's not until the filesystem is shutdown
or the system crashes after writing the truncate transaction to the
journal but before the zeroed data in the page cache is flushed that
the issue is exposed.

Fix this by also flushing the dirty data in memory region between
the old size and new size when we've found blocks that need zeroing
in the truncate process.

Reported-by: Liu Bo 
Signed-off-by: Dave Chinner 
Reviewed-by: Brian Foster 
Signed-off-by: Dave Chinner 
[bwh: Backported to 3.2: adjust filename, context]
Signed-off-by: Ben Hutchings

xfs: really fix the cursor leak in xfs_alloc_ag_vextent_near

2014-08-06T17:07:40+00:00

commit e3a746f5aab71f2dd0a83116772922fb37ae29d6 upstream.

The current cursor is reallocated when retrying the allocation, so
the existing cursor needs to be destroyed in both the restart and
the failure cases.

Signed-off-by: Dave Chinner 
Tested-by: Mike Snitzer 
Signed-off-by: Ben Myers 
Signed-off-by: Ben Hutchings

xfs: fix allocbt cursor leak in xfs_alloc_ag_vextent_near

2014-08-06T17:07:40+00:00

commit 76d095388b040229ea1aad7dea45be0cfa20f589 upstream.

When we fail to find an matching extent near the requested extent
specification during a left-right distance search in
xfs_alloc_ag_vextent_near, we fail to free the original cursor that
we used to look up the XFS_BTNUM_CNT tree and hence leak it.

Reported-by: Chris J Arges 
Signed-off-by: Dave Chinner 
Reviewed-by: Christoph Hellwig 
Signed-off-by: Ben Myers 
Signed-off-by: Ben Hutchings