linux-stable.git/fs/xfs, branch v3.2.63

xfs: really fix the cursor leak in xfs_alloc_ag_vextent_near

2014-08-06T17:07:40+00:00

commit e3a746f5aab71f2dd0a83116772922fb37ae29d6 upstream.

The current cursor is reallocated when retrying the allocation, so
the existing cursor needs to be destroyed in both the restart and
the failure cases.

Signed-off-by: Dave Chinner 
Tested-by: Mike Snitzer 
Signed-off-by: Ben Myers 
Signed-off-by: Ben Hutchings

xfs: fix allocbt cursor leak in xfs_alloc_ag_vextent_near

2014-08-06T17:07:40+00:00

commit 76d095388b040229ea1aad7dea45be0cfa20f589 upstream.

When we fail to find an matching extent near the requested extent
specification during a left-right distance search in
xfs_alloc_ag_vextent_near, we fail to free the original cursor that
we used to look up the XFS_BTNUM_CNT tree and hence leak it.

Reported-by: Chris J Arges 
Signed-off-by: Dave Chinner 
Reviewed-by: Christoph Hellwig 
Signed-off-by: Ben Myers 
Signed-off-by: Ben Hutchings

xfs: Account log unmount transaction correctly

2014-02-15T19:20:10+00:00

commit 3948659e30808fbaa7673bbe89de2ae9769e20a7 upstream.

There have been a few reports of this warning appearing recently:

XFS (dm-4): xlog_space_left: head behind tail
 tail_cycle = 129, tail_bytes = 20163072
 GH   cycle = 129, GH   bytes = 20162880

The common cause appears to be lots of freeze and unfreeze cycles,
and the output from the warnings indicates that we are leaking
around 8 bytes of log space per freeze/unfreeze cycle.

When we freeze the filesystem, we write an unmount record and that
uses xlog_write directly - a special type of transaction,
effectively. What it doesn't do, however, is correctly account for
the log space it uses. The unmount record writes an 8 byte structure
with a special magic number into the log, and the space this
consumes is not accounted for in the log ticket tracking the
operation. Hence we leak 8 bytes every unmount record that is
written.

Signed-off-by: Dave Chinner 
Reviewed-by: Christoph Hellwig 
Signed-off-by: Ben Myers 
Signed-off-by: Ben Hutchings

xfs: underflow bug in xfs_attrlist_by_handle()

2014-01-03T04:33:35+00:00

commit 31978b5cc66b8ba8a7e8eef60b12395d41b7b890 upstream.

If we allocate less than sizeof(struct attrlist) then we end up
corrupting memory or doing a ZERO_PTR_SIZE dereference.

This can only be triggered with CAP_SYS_ADMIN.

Reported-by: Nico Golde 
Reported-by: Fabian Yamaguchi 
Signed-off-by: Dan Carpenter 
Reviewed-by: Dave Chinner 
Signed-off-by: Ben Myers 

(cherry picked from commit 071c529eb672648ee8ca3f90944bcbcc730b4c06)
Signed-off-by: Ben Hutchings

xfs: kill suid/sgid through the truncate path.

2013-06-19T01:16:40+00:00

commit 2962f5a5dcc56f69cbf62121a7be67cc15d6940b upstream.

XFS has failed to kill suid/sgid bits correctly when truncating
files of non-zero size since commit c4ed4243 ("xfs: split
xfs_setattr") introduced in the 3.1 kernel. Fix it.

Fix it.

Signed-off-by: Dave Chinner 
Reviewed-by: Brian Foster 
Signed-off-by: Ben Myers 

(cherry picked from commit 56c19e89b38618390addfc743d822f99519055c6)
Signed-off-by: Ben Hutchings

xfs: Fix possible use-after-free with AIO

2013-02-06T04:33:49+00:00

commit 4b05d09c18d9aa62d2e7fb4b057f54e5a38963f5 upstream.

Running AIO is pinning inode in memory using file reference. Once AIO
is completed using aio_complete(), file reference is put and inode can
be freed from memory. So we have to be sure that calling aio_complete()
is the last thing we do with the inode.

CC: xfs@oss.sgi.com
CC: Ben Myers 
Signed-off-by: Jan Kara 
Reviewed-by: Ben Myers 
Signed-off-by: Ben Myers 
Signed-off-by: Ben Hutchings

xfs: drop buffer io reference when a bad bio is built

2012-12-06T11:20:25+00:00

commit d69043c42d8c6414fa28ad18d99973aa6c1c2e24 upstream.

Error handling in xfs_buf_ioapply_map() does not handle IO reference
counts correctly. We increment the b_io_remaining count before
building the bio, but then fail to decrement it in the failure case.
This leads to the buffer never running IO completion and releasing
the reference that the IO holds, so at unmount we can leak the
buffer. This leak is captured by this assert failure during unmount:

XFS: Assertion failed: atomic_read(&pag->pag_ref) == 0, file: fs/xfs/xfs_mount.c, line: 273

This is not a new bug - the b_io_remaining accounting has had this
problem for a long, long time - it's just very hard to get a
zero length bio being built by this code...

Further, the buffer IO error can be overwritten on a multi-segment
buffer by subsequent bio completions for partial sections of the
buffer. Hence we should only set the buffer error status if the
buffer is not already carrying an error status. This ensures that a
partial IO error on a multi-segment buffer will not be lost. This
part of the problem is a regression, however.

Signed-off-by: Dave Chinner 
Reviewed-by: Mark Tinguely 
Signed-off-by: Ben Myers 
Signed-off-by: Ben Hutchings

xfs: fix reading of wrapped log data

2012-11-16T16:47:12+00:00

commit 6ce377afd1755eae5c93410ca9a1121dfead7b87 upstream.

Commit 4439647 ("xfs: reset buffer pointers before freeing them") in
3.0-rc1 introduced a regression when recovering log buffers that
wrapped around the end of log. The second part of the log buffer at
the start of the physical log was being read into the header buffer
rather than the data buffer, and hence recovery was seeing garbage
in the data buffer when it got to the region of the log buffer that
was incorrectly read.

Reported-by: Torsten Kaiser 
Signed-off-by: Dave Chinner 
Reviewed-by: Christoph Hellwig 
Reviewed-by: Mark Tinguely 
Signed-off-by: Ben Myers 
Signed-off-by: Ben Hutchings

tmpfs,ceph,gfs2,isofs,reiserfs,xfs: fix fh_len checking

2012-10-30T23:26:40+00:00

commit 35c2a7f4908d404c9124c2efc6ada4640ca4d5d5 upstream.

Fuzzing with trinity oopsed on the 1st instruction of shmem_fh_to_dentry(),
	u64 inum = fid->raw[2];
which is unhelpfully reported as at the end of shmem_alloc_inode():

BUG: unable to handle kernel paging request at ffff880061cd3000
IP: [] shmem_alloc_inode+0x40/0x40
Oops: 0000 [#1] PREEMPT SMP DEBUG_PAGEALLOC
Call Trace:
 [] ? exportfs_decode_fh+0x79/0x2d0
 [] do_handle_open+0x163/0x2c0
 [] sys_open_by_handle_at+0xc/0x10
 [] tracesys+0xe1/0xe6

Right, tmpfs is being stupid to access fid->raw[2] before validating that
fh_len includes it: the buffer kmalloc'ed by do_sys_name_to_handle() may
fall at the end of a page, and the next page not be present.

But some other filesystems (ceph, gfs2, isofs, reiserfs, xfs) are being
careless about fh_len too, in fh_to_dentry() and/or fh_to_parent(), and
could oops in the same way: add the missing fh_len checks to those.

Reported-by: Sasha Levin 
Signed-off-by: Hugh Dickins 
Cc: Al Viro 
Cc: Sage Weil 
Cc: Steven Whitehouse 
Cc: Christoph Hellwig 
Signed-off-by: Al Viro 
Signed-off-by: Ben Hutchings

xfs: Fix oops on IO error during xlog_recover_process_iunlinks()

2012-04-02T16:53:06+00:00

commit d97d32edcd732110758799ae60af725e5110b3dc upstream.

When an IO error happens during inode deletion run from
xlog_recover_process_iunlinks() filesystem gets shutdown. Thus any subsequent
attempt to read buffers fails. Code in xlog_recover_process_iunlinks() does not
count with the fact that read of a buffer which was read a while ago can
really fail which results in the oops on
  agi = XFS_BUF_TO_AGI(agibp);

Fix the problem by cleaning up the buffer handling in
xlog_recover_process_iunlinks() as suggested by Dave Chinner. We release buffer
lock but keep buffer reference to AG buffer. That is enough for buffer to stay
pinned in memory and we don't have to call xfs_read_agi() all the time.

Signed-off-by: Jan Kara 
Reviewed-by: Dave Chinner 
Signed-off-by: Ben Myers 
Signed-off-by: Greg Kroah-Hartman