linux-stable.git/fs/udf, branch linux-3.10.y

udf: Fix deadlock between writeback and udf_setsize()

2017-11-02T09:45:57+00:00

commit f2e95355891153f66d4156bf3a142c6489cd78c6 upstream.

udf_setsize() called truncate_setsize() with i_data_sem held. Thus
truncate_pagecache() called from truncate_setsize() could lock a page
under i_data_sem which can deadlock as page lock ranks below
i_data_sem - e. g. writeback can hold page lock and try to acquire
i_data_sem to map a block.

Fix the problem by moving truncate_setsize() calls from under
i_data_sem. It is safe for us to change i_size without holding
i_data_sem as all the places that depend on i_size being stable already
hold inode_lock.

CC: stable@vger.kernel.org
Fixes: 7e49b6f2480cb9a9e7322a91592e56a5c85361f5
Signed-off-by: Jan Kara 
Signed-off-by: Willy Tarreau

udf: Check output buffer length when converting name to CS0

2016-02-25T19:57:48+00:00

commit bb00c898ad1ce40c4bb422a8207ae562e9aea7ae upstream.

If a name contains at least some characters with Unicode values
exceeding single byte, the CS0 output should have 2 bytes per character.
And if other input characters have single byte Unicode values, then
the single input byte is converted to 2 output bytes, and the length
of output becomes larger than the length of input. And if the input
name is long enough, the output length may exceed the allocated buffer
length.

All this means that conversion from UTF8 or NLS to CS0 requires
checking of output length in order to stop when it exceeds the given
output buffer size.

[JK: Make code return -ENAMETOOLONG instead of silently truncating the
name]

Signed-off-by: Andrew Gabbasov 
Signed-off-by: Jan Kara 
Signed-off-by: Greg Kroah-Hartman

udf: Prevent buffer overrun with multi-byte characters

2016-02-25T19:57:48+00:00

commit ad402b265ecf6fa22d04043b41444cdfcdf4f52d upstream.

udf_CS0toUTF8 function stops the conversion when the output buffer
length reaches UDF_NAME_LEN-2, which is correct maximum name length,
but, when checking, it leaves the space for a single byte only,
while multi-bytes output characters can take more space, causing
buffer overflow.

Similar error exists in udf_CS0toNLS function, that restricts
the output length to UDF_NAME_LEN, while actual maximum allowed
length is UDF_NAME_LEN-2.

In these cases the output can override not only the current buffer
length field, causing corruption of the name buffer itself, but also
following allocation structures, causing kernel crash.

Adjust the output length checks in both functions to prevent buffer
overruns in case of multi-bytes UTF8 or NLS characters.

Signed-off-by: Andrew Gabbasov 
Signed-off-by: Jan Kara 
Signed-off-by: Greg Kroah-Hartman

udf: limit the maximum number of indirect extents in a row

2016-02-25T19:57:48+00:00

commit b0918d9f476a8434b055e362b83fa4fd1d462c3f upstream.

udf_next_aext() just follows extent pointers while extents are marked as
indirect. This can loop forever for corrupted filesystem. Limit number
the of indirect extents we are willing to follow in a row.

[JK: Updated changelog, limit, style]

Signed-off-by: Vegard Nossum 
Cc: Jan Kara 
Cc: Quentin Casasnovas 
Cc: Andrew Morton 
Signed-off-by: Jan Kara 
Signed-off-by: Greg Kroah-Hartman

udf: Check length of extended attributes and allocation descriptors

2015-10-22T21:37:51+00:00

commit 23b133bdc452aa441fcb9b82cbf6dd05cfd342d0 upstream.

Check length of extended attributes and allocation descriptors when
loading inodes from disk. Otherwise corrupted filesystems could confuse
the code and make the kernel oops.

Reported-by: Carl Henrik Lunde 
Cc: stable@vger.kernel.org
Signed-off-by: Jan Kara 
Signed-off-by: Jiri Slaby 
[Jan and Jiri fixed it in 3.12 stable, i ported it to 3.10 stable,
 replaced bs by inode->i_sb->s_blocksize]
Signed-off-by: Zhang Zhen 
Signed-off-by: Greg Kroah-Hartman

udf: Verify symlink size before loading it

2015-01-08T17:58:17+00:00

commit a1d47b262952a45aae62bd49cfaf33dd76c11a2c upstream.

UDF specification allows arbitrarily large symlinks. However we support
only symlinks at most one block large. Check the length of the symlink
so that we don't access memory beyond end of the symlink block.

Reported-by: Carl Henrik Lunde 
Signed-off-by: Jan Kara 
Signed-off-by: Greg Kroah-Hartman

udf: Avoid infinite loop when processing indirect ICBs

2014-10-09T19:18:42+00:00

commit c03aa9f6e1f938618e6db2e23afef0574efeeb65 upstream.

We did not implement any bound on number of indirect ICBs we follow when
loading inode. Thus corrupted medium could cause kernel to go into an
infinite loop, possibly causing a stack overflow.

Fix the possible stack overflow by removing recursion from
__udf_read_inode() and limit number of indirect ICBs we follow to avoid
infinite loops.

Signed-off-by: Jan Kara 
Cc: Chuck Ebbert 
Signed-off-by: Greg Kroah-Hartman

udf: Refuse RW mount of the filesystem instead of making it RO

2013-10-01T16:17:48+00:00

commit e729eac6f65e11c5f03b09adcc84bd5bcb230467 upstream.

Refuse RW mount of udf filesystem. So far we just silently changed it
to RO mount but when the media is writeable, block layer won't notice
this change and thus will think device is used RW and will block eject
button of the drive. That is unexpected by users because for
non-writeable media eject button works just fine.

Userspace mount(8) command handles this just fine and retries mounting
with MS_RDONLY set so userspace shouldn't see any regression.  Plus any
tool mounting udf is likely confronted with the case of read-only
media where block layer already refuses to mount the filesystem without
MS_RDONLY set so our behavior shouldn't be anything new for it.

Reported-by: Hui Wang 
Signed-off-by: Jan Kara 
Signed-off-by: Greg Kroah-Hartman

udf: Standardize return values in mount sequence

2013-10-01T16:17:48+00:00

commit d759bfa4e7919b89357de50a2e23817079889195 upstream.

Change all function used in filesystem discovery during mount to user
standard kernel return values - -errno on error, 0 on success instead
of 1 on failure and 0 on success. This allows us to pass error number
(not just failure / success) so we can abort device scanning earlier
in case of errors like EIO or ENOMEM . Also we will be able to return
EROFS in case writeable mount is requested but writing isn't supported.

Signed-off-by: Jan Kara 
Cc: Hui Wang 
Signed-off-by: Greg Kroah-Hartman

aio: don't include aio.h in sched.h

2013-05-08T03:16:25+00:00

Faster kernel compiles by way of fewer unnecessary includes.

[akpm@linux-foundation.org: fix fallout]
[akpm@linux-foundation.org: fix build]
Signed-off-by: Kent Overstreet 
Cc: Zach Brown 
Cc: Felipe Balbi 
Cc: Greg Kroah-Hartman 
Cc: Mark Fasheh 
Cc: Joel Becker 
Cc: Rusty Russell 
Cc: Jens Axboe 
Cc: Asai Thambi S P 
Cc: Selvan Mani 
Cc: Sam Bradshaw 
Cc: Jeff Moyer 
Cc: Al Viro 
Cc: Benjamin LaHaise 
Reviewed-by: "Theodore Ts'o" 
Signed-off-by: Andrew Morton 
Signed-off-by: Linus Torvalds