linux-stable.git/fs/proc/root.c, branch v3.16.67

vfs: Commit to never having exectuables on proc and sysfs.

2017-04-04T21:21:56+00:00

commit 22f6b4d34fcf039c63a94e7670e0da24f8575a5a upstream.

Today proc and sysfs do not contain any executable files.  Several
applications today mount proc or sysfs without noexec and nosuid and
then depend on there being no exectuables files on proc or sysfs.
Having any executable files show on proc or sysfs would cause
a user space visible regression, and most likely security problems.

Therefore commit to never allowing executables on proc and sysfs by
adding a new flag to mark them as filesystems without executables and
enforce that flag.

Test the flag where MNT_NOEXEC is tested today, so that the only user
visible effect will be that exectuables will be treated as if the
execute bit is cleared.

The filesystems proc and sysfs do not currently incoporate any
executable files so this does not result in any user visible effects.

This makes it unnecessary to vet changes to proc and sysfs tightly for
adding exectuable files or changes to chattr that would modify
existing files, as no matter what the individual file say they will
not be treated as exectuable files by the vfs.

Not having to vet changes to closely is important as without this we
are only one proc_create call (or another goof up in the
implementation of notify_change) from having problematic executables
on proc.  Those mistakes are all too easy to make and would create
a situation where there are security issues or the assumptions of
some program having to be broken (and cause userspace regressions).

Signed-off-by: "Eric W. Biederman" 
[bwh: Backported to 3.16: we don't have super_block::s_iflags; use
 file_system_type::fs_flags instead]
Signed-off-by: Ben Hutchings

proc: prevent stacking filesystems on top

2016-08-22T21:38:27+00:00

commit e54ad7f1ee263ffa5a2de9c609d58dfa27b21cd9 upstream.

This prevents stacking filesystems (ecryptfs and overlayfs) from using
procfs as lower filesystem.  There is too much magic going on inside
procfs, and there is no good reason to stack stuff on top of procfs.

(For example, procfs does access checks in VFS open handlers, and
ecryptfs by design calls open handlers from a kernel thread that doesn't
drop privileges or so.)

Signed-off-by: Jann Horn 
Signed-off-by: Linus Torvalds 
Signed-off-by: Ben Hutchings

proc: Allow creating permanently empty directories that serve as mount points

2015-07-15T09:01:06+00:00

commit eb6d38d5427b3ad42f5268da0f1dd31bb0af1264 upstream.

Add a new function proc_create_mount_point that when used to creates a
directory that can not be added to.

Add a new function is_empty_pde to test if a function is a mount
point.

Update the code to use make_empty_dir_inode when reporting
a permanently empty directory to the vfs.

Update the code to not allow adding to permanently empty directories.

Update /proc/openprom and /proc/fs/nfsd to be permanently empty directories.

Signed-off-by: "Eric W. Biederman" 
[ luis: backported to 3.16: adjusted context ]
Signed-off-by: Luis Henriques

mnt: Refactor the logic for mounting sysfs and proc in a user namespace

2015-07-09T13:36:04+00:00

commit 1b852bceb0d111e510d1a15826ecc4a19358d512 upstream.

Fresh mounts of proc and sysfs are a very special case that works very
much like a bind mount.  Unfortunately the current structure can not
preserve the MNT_LOCK... mount flags.  Therefore refactor the logic
into a form that can be modified to preserve those lock bits.

Add a new filesystem flag FS_USERNS_VISIBLE that requires some mount
of the filesystem be fully visible in the current mount namespace,
before the filesystem may be mounted.

Move the logic for calling fs_fully_visible from proc and sysfs into
fs/namespace.c where it has greater access to mount namespace state.

Signed-off-by: "Eric W. Biederman" 
Signed-off-by: Luis Henriques

Merge tag 'ext4_for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tytso/ext4

2014-04-04T22:39:39+00:00

Pull ext4 updates from Ted Ts'o:
 "Major changes for 3.14 include support for the newly added ZERO_RANGE
  and COLLAPSE_RANGE fallocate operations, and scalability improvements
  in the jbd2 layer and in xattr handling when the extended attributes
  spill over into an external block.

  Other than that, the usual clean ups and minor bug fixes"

* tag 'ext4_for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tytso/ext4: (42 commits)
  ext4: fix premature freeing of partial clusters split across leaf blocks
  ext4: remove unneeded test of ret variable
  ext4: fix comment typo
  ext4: make ext4_block_zero_page_range static
  ext4: atomically set inode->i_flags in ext4_set_inode_flags()
  ext4: optimize Hurd tests when reading/writing inodes
  ext4: kill i_version support for Hurd-castrated file systems
  ext4: each filesystem creates and uses its own mb_cache
  fs/mbcache.c: doucple the locking of local from global data
  fs/mbcache.c: change block and index hash chain to hlist_bl_node
  ext4: Introduce FALLOC_FL_ZERO_RANGE flag for fallocate
  ext4: refactor ext4_fallocate code
  ext4: Update inode i_size after the preallocation
  ext4: fix partial cluster handling for bigalloc file systems
  ext4: delete path dealloc code in ext4_ext_handle_uninitialized_extents
  ext4: only call sync_filesystm() when remounting read-only
  fs: push sync_filesystem() down to the file system's remount_fs()
  jbd2: improve error messages for inconsistent journal heads
  jbd2: minimize region locked by j_list_lock in jbd2_journal_forget()
  jbd2: minimize region locked by j_list_lock in journal_get_create_access()
  ...

fs: push sync_filesystem() down to the file system's remount_fs()

2014-03-13T14:14:33+00:00

Previously, the no-op "mount -o mount /dev/xxx" operation when the
file system is already mounted read-write causes an implied,
unconditional syncfs().  This seems pretty stupid, and it's certainly
documented or guaraunteed to do this, nor is it particularly useful,
except in the case where the file system was mounted rw and is getting
remounted read-only.

However, it's possible that there might be some file systems that are
actually depending on this behavior.  In most file systems, it's
probably fine to only call sync_filesystem() when transitioning from
read-write to read-only, and there are some file systems where this is
not needed at all (for example, for a pseudo-filesystem or something
like romfs).

Signed-off-by: "Theodore Ts'o" 
Cc: linux-fsdevel@vger.kernel.org
Cc: Christoph Hellwig 
Cc: Artem Bityutskiy 
Cc: Adrian Hunter 
Cc: Evgeniy Dushistov 
Cc: Jan Kara 
Cc: OGAWA Hirofumi 
Cc: Anders Larsen 
Cc: Phillip Lougher 
Cc: Kees Cook 
Cc: Mikulas Patocka 
Cc: Petr Vandrovec 
Cc: xfs@oss.sgi.com
Cc: linux-btrfs@vger.kernel.org
Cc: linux-cifs@vger.kernel.org
Cc: samba-technical@lists.samba.org
Cc: codalist@coda.cs.cmu.edu
Cc: linux-ext4@vger.kernel.org
Cc: linux-f2fs-devel@lists.sourceforge.net
Cc: fuse-devel@lists.sourceforge.net
Cc: cluster-devel@redhat.com
Cc: linux-mtd@lists.infradead.org
Cc: jfs-discussion@lists.sourceforge.net
Cc: linux-nfs@vger.kernel.org
Cc: linux-nilfs@vger.kernel.org
Cc: linux-ntfs-dev@lists.sourceforge.net
Cc: ocfs2-devel@oss.oracle.com
Cc: reiserfs-devel@vger.kernel.org

of: remove /proc/device-tree

2014-03-11T20:48:32+00:00

The same data is now available in sysfs, so we can remove the code
that exports it in /proc and replace it with a symlink to the sysfs
version.

Tested on versatile qemu model and mpc5200 eval board. More testing
would be appreciated.

v5: Fixed up conflicts with mainline changes

Signed-off-by: Grant Likely 
Cc: Rob Herring 
Cc: Benjamin Herrenschmidt 
Cc: David S. Miller 
Cc: Nathan Fontenot 
Cc: Pantelis Antoniou

Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/ebiederm/user-namespace

2013-09-07T21:35:32+00:00

Pull namespace changes from Eric Biederman:
 "This is an assorted mishmash of small cleanups, enhancements and bug
  fixes.

  The major theme is user namespace mount restrictions.  nsown_capable
  is killed as it encourages not thinking about details that need to be
  considered.  A very hard to hit pid namespace exiting bug was finally
  tracked and fixed.  A couple of cleanups to the basic namespace
  infrastructure.

  Finally there is an enhancement that makes per user namespace
  capabilities usable as capabilities, and an enhancement that allows
  the per userns root to nice other processes in the user namespace"

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/ebiederm/user-namespace:
  userns:  Kill nsown_capable it makes the wrong thing easy
  capabilities: allow nice if we are privileged
  pidns: Don't have unshare(CLONE_NEWPID) imply CLONE_THREAD
  userns: Allow PR_CAPBSET_DROP in a user namespace.
  namespaces: Simplify copy_namespaces so it is clear what is going on.
  pidns: Fix hang in zap_pid_ns_processes by sending a potentially extra wakeup
  sysfs: Restrict mounting sysfs
  userns: Better restrictions on when proc and sysfs can be mounted
  vfs: Don't copy mount bind mounts of /proc//ns/mnt between namespaces
  kernel/nsproxy.c: Improving a snippet of code.
  proc: Restrict mounting the proc filesystem
  vfs: Lock in place mounts from more privileged users

userns: Better restrictions on when proc and sysfs can be mounted

2013-08-27T02:17:03+00:00

Rely on the fact that another flavor of the filesystem is already
mounted and do not rely on state in the user namespace.

Verify that the mounted filesystem is not covered in any significant
way.  I would love to verify that the previously mounted filesystem
has no mounts on top but there are at least the directories
/proc/sys/fs/binfmt_misc and /sys/fs/cgroup/ that exist explicitly
for other filesystems to mount on top of.

Refactor the test into a function named fs_fully_visible and call that
function from the mount routines of proc and sysfs.  This makes this
test local to the filesystems involved and the results current of when
the mounts take place, removing a weird threading of the user
namespace, the mount namespace and the filesystems themselves.

Signed-off-by: "Eric W. Biederman"

proc: Restrict mounting the proc filesystem

2013-08-26T18:36:58+00:00

Don't allow mounting the proc filesystem unless the caller has
CAP_SYS_ADMIN rights over the pid namespace.  The principle here is if
you create or have capabilities over it you can mount it, otherwise
you get to live with what other people have mounted.

Andy pointed out that this is needed to prevent users in a user
namespace from remounting proc and specifying different hidepid and gid
options on already existing proc mounts.

Cc: stable@vger.kernel.org
Reported-by: Andy Lutomirski 
Signed-off-by: "Eric W. Biederman"