linux-stable.git/fs/proc/base.c, branch v5.10.78

proc: Avoid mixing integer types in mem_rw()

2021-07-28T12:35:42+00:00

[ Upstream commit d238692b4b9f2c36e35af4c6e6f6da36184aeb3e ]

Use size_t when capping the count argument received by mem_rw(). Since
count is size_t, using min_t(int, ...) can lead to a negative value
that will later be passed to access_remote_vm(), which can cause
unexpected behavior.

Since we are capping the value to at maximum PAGE_SIZE, the conversion
from size_t to int when passing it to access_remote_vm() as "len"
shouldn't be a problem.

Link: https://lkml.kernel.org/r/20210512125215.3348316-1-marcelo.cerri@canonical.com
Reviewed-by: David Disseldorp 
Signed-off-by: Thadeu Lima de Souza Cascardo 
Signed-off-by: Marcelo Henrique Cerri 
Cc: Alexey Dobriyan 
Cc: Souza Cascardo 
Cc: Christian Brauner 
Cc: Michel Lespinasse 
Cc: Helge Deller 
Cc: Oleg Nesterov 
Cc: Lorenzo Stoakes 
Signed-off-by: Andrew Morton 
Signed-off-by: Linus Torvalds 
Signed-off-by: Sasha Levin

proc: only require mm_struct for writing

2021-06-16T10:01:47+00:00

commit 94f0b2d4a1d0c52035aef425da5e022bd2cb1c71 upstream.

Commit 591a22c14d3f ("proc: Track /proc/$pid/attr/ opener mm_struct") we
started using __mem_open() to track the mm_struct at open-time, so that
we could then check it for writes.

But that also ended up making the permission checks at open time much
stricter - and not just for writes, but for reads too.  And that in turn
caused a regression for at least Fedora 29, where NIC interfaces fail to
start when using NetworkManager.

Since only the write side wanted the mm_struct test, ignore any failures
by __mem_open() at open time, leaving reads unaffected.  The write()
time verification of the mm_struct pointer will then catch the failure
case because a NULL pointer will not match a valid 'current->mm'.

Link: https://lore.kernel.org/netdev/YMjTlp2FSJYvoyFa@unreal/
Fixes: 591a22c14d3f ("proc: Track /proc/$pid/attr/ opener mm_struct")
Reported-and-tested-by: Leon Romanovsky 
Cc: Kees Cook 
Cc: Christian Brauner 
Cc: Andrea Righi 
Signed-off-by: Linus Torvalds 
Signed-off-by: Greg Kroah-Hartman

proc: Track /proc/$pid/attr/ opener mm_struct

2021-06-16T10:01:34+00:00

commit 591a22c14d3f45cc38bd1931c593c221df2f1881 upstream.

Commit bfb819ea20ce ("proc: Check /proc/$pid/attr/ writes against file opener")
tried to make sure that there could not be a confusion between the opener of
a /proc/$pid/attr/ file and the writer. It used struct cred to make sure
the privileges didn't change. However, there were existing cases where a more
privileged thread was passing the opened fd to a differently privileged thread
(during container setup). Instead, use mm_struct to track whether the opener
and writer are still the same process. (This is what several other proc files
already do, though for different reasons.)

Reported-by: Christian Brauner 
Reported-by: Andrea Righi 
Tested-by: Andrea Righi 
Fixes: bfb819ea20ce ("proc: Check /proc/$pid/attr/ writes against file opener")
Cc: stable@vger.kernel.org
Signed-off-by: Kees Cook 
Signed-off-by: Linus Torvalds 
Signed-off-by: Greg Kroah-Hartman

proc: Check /proc/$pid/attr/ writes against file opener

2021-06-03T07:00:28+00:00

commit bfb819ea20ce8bbeeba17e1a6418bf8bda91fc28 upstream.

Fix another "confused deputy" weakness[1]. Writes to /proc/$pid/attr/
files need to check the opener credentials, since these fds do not
transition state across execve(). Without this, it is possible to
trick another process (which may have different credentials) to write
to its own /proc/$pid/attr/ files, leading to unexpected and possibly
exploitable behaviors.

[1] https://www.kernel.org/doc/html/latest/security/credentials.html?highlight=confused#open-file-credentials

Fixes: 1da177e4c3f41 ("Linux-2.6.12-rc2")
Cc: stable@vger.kernel.org
Signed-off-by: Kees Cook 
Signed-off-by: Linus Torvalds 
Signed-off-by: Greg Kroah-Hartman

exec: Transform exec_update_mutex into a rw_semaphore

2021-01-09T12:46:24+00:00

[ Upstream commit f7cfd871ae0c5008d94b6f66834e7845caa93c15 ]

Recently syzbot reported[0] that there is a deadlock amongst the users
of exec_update_mutex.  The problematic lock ordering found by lockdep
was:

   perf_event_open  (exec_update_mutex -> ovl_i_mutex)
   chown            (ovl_i_mutex       -> sb_writes)
   sendfile         (sb_writes         -> p->lock)
     by reading from a proc file and writing to overlayfs
   proc_pid_syscall (p->lock           -> exec_update_mutex)

While looking at possible solutions it occured to me that all of the
users and possible users involved only wanted to state of the given
process to remain the same.  They are all readers.  The only writer is
exec.

There is no reason for readers to block on each other.  So fix
this deadlock by transforming exec_update_mutex into a rw_semaphore
named exec_update_lock that only exec takes for writing.

Cc: Jann Horn 
Cc: Vasiliy Kulikov 
Cc: Al Viro 
Cc: Bernd Edlinger 
Cc: Oleg Nesterov 
Cc: Christopher Yeoh 
Cc: Cyrill Gorcunov 
Cc: Sargun Dhillon 
Cc: Christian Brauner 
Cc: Arnd Bergmann 
Cc: Peter Zijlstra 
Cc: Ingo Molnar 
Cc: Arnaldo Carvalho de Melo 
Fixes: eea9673250db ("exec: Add exec_update_mutex to replace cred_guard_mutex")
[0] https://lkml.kernel.org/r/00000000000063640c05ade8e3de@google.com
Reported-by: syzbot+db9cdf3dd1f64252c6ef@syzkaller.appspotmail.com
Link: https://lkml.kernel.org/r/87ft4mbqen.fsf@x220.int.ebiederm.org
Signed-off-by: Eric W. Biederman 
Signed-off-by: Sasha Levin

mm, oom: keep oom_adj under or at upper limit when printing

2020-11-02T20:14:19+00:00

For oom_score_adj values in the range [942,999], the current
calculations will print 16 for oom_adj.  This patch simply limits the
output so output is inline with docs.

Signed-off-by: Charles Haithcock 
Signed-off-by: Andrew Morton 
Acked-by: Michal Hocko 
Cc: Alexey Dobriyan 
Link: https://lkml.kernel.org/r/20201020165130.33927-1-chaithco@redhat.com
Signed-off-by: Linus Torvalds

io-wq: inherit audit loginuid and sessionid

2020-10-17T15:25:47+00:00

Make sure the async io-wq workers inherit the loginuid and sessionid from
the original task, and restore them to unset once we're done with the
async work item.

While at it, disable the ability for kernel threads to write to their own
loginuid.

Signed-off-by: Jens Axboe

mm, oom_adj: don't loop through tasks in __set_oom_adj when not necessary

2020-10-14T01:38:35+00:00

Currently __set_oom_adj loops through all processes in the system to keep
oom_score_adj and oom_score_adj_min in sync between processes sharing
their mm.  This is done for any task with more that one mm_users, which
includes processes with multiple threads (sharing mm and signals).
However for such processes the loop is unnecessary because their signal
structure is shared as well.

Android updates oom_score_adj whenever a tasks changes its role
(background/foreground/...) or binds to/unbinds from a service, making it
more/less important.  Such operation can happen frequently.  We noticed
that updates to oom_score_adj became more expensive and after further
investigation found out that the patch mentioned in "Fixes" introduced a
regression.  Using Pixel 4 with a typical Android workload, write time to
oom_score_adj increased from ~3.57us to ~362us.  Moreover this regression
linearly depends on the number of multi-threaded processes running on the
system.

Mark the mm with a new MMF_MULTIPROCESS flag bit when task is created with
(CLONE_VM && !CLONE_THREAD && !CLONE_VFORK).  Change __set_oom_adj to use
MMF_MULTIPROCESS instead of mm_users to decide whether oom_score_adj
update should be synchronized between multiple processes.  To prevent
races between clone() and __set_oom_adj(), when oom_score_adj of the
process being cloned might be modified from userspace, we use
oom_adj_mutex.  Its scope is changed to global.

The combination of (CLONE_VM && !CLONE_THREAD) is rarely used except for
the case of vfork().  To prevent performance regressions of vfork(), we
skip taking oom_adj_mutex and setting MMF_MULTIPROCESS when CLONE_VFORK is
specified.  Clearing the MMF_MULTIPROCESS flag (when the last process
sharing the mm exits) is left out of this patch to keep it simple and
because it is believed that this threading model is rare.  Should there
ever be a need for optimizing that case as well, it can be done by hooking
into the exit path, likely following the mm_update_next_owner pattern.

With the combination of (CLONE_VM && !CLONE_THREAD && !CLONE_VFORK) being
quite rare, the regression is gone after the change is applied.

[surenb@google.com: v3]
  Link: https://lkml.kernel.org/r/20200902012558.2335613-1-surenb@google.com

Fixes: 44a70adec910 ("mm, oom_adj: make sure processes sharing mm have same view of oom_score_adj")
Reported-by: Tim Murray 
Suggested-by: Michal Hocko 
Signed-off-by: Suren Baghdasaryan 
Signed-off-by: Andrew Morton 
Acked-by: Christian Brauner 
Acked-by: Michal Hocko 
Acked-by: Oleg Nesterov 
Cc: Ingo Molnar 
Cc: Peter Zijlstra 
Cc: Thomas Gleixner 
Cc: Eugene Syromiatnikov 
Cc: Christian Kellner 
Cc: Adrian Reber 
Cc: Shakeel Butt 
Cc: Aleksa Sarai 
Cc: Alexey Dobriyan 
Cc: "Eric W. Biederman" 
Cc: Alexey Gladkov 
Cc: Michel Lespinasse 
Cc: Daniel Jordan 
Cc: Andrei Vagin 
Cc: Bernd Edlinger 
Cc: John Johansen 
Cc: Yafang Shao 
Link: https://lkml.kernel.org/r/20200824153036.3201505-1-surenb@google.com
Debugged-by: Minchan Kim 
Signed-off-by: Linus Torvalds

mm, oom: make the calculation of oom badness more accurate

2020-08-12T17:57:56+00:00

Recently we found an issue on our production environment that when memcg
oom is triggered the oom killer doesn't chose the process with largest
resident memory but chose the first scanned process.  Note that all
processes in this memcg have the same oom_score_adj, so the oom killer
should chose the process with largest resident memory.

Bellow is part of the oom info, which is enough to analyze this issue.
[7516987.983223] memory: usage 16777216kB, limit 16777216kB, failcnt 52843037
[7516987.983224] memory+swap: usage 16777216kB, limit 9007199254740988kB, failcnt 0
[7516987.983225] kmem: usage 301464kB, limit 9007199254740988kB, failcnt 0
[...]
[7516987.983293] [ pid ]   uid  tgid total_vm      rss pgtables_bytes swapents oom_score_adj name
[7516987.983510] [ 5740]     0  5740      257        1    32768        0          -998 pause
[7516987.983574] [58804]     0 58804     4594      771    81920        0          -998 entry_point.bas
[7516987.983577] [58908]     0 58908     7089      689    98304        0          -998 cron
[7516987.983580] [58910]     0 58910    16235     5576   163840        0          -998 supervisord
[7516987.983590] [59620]     0 59620    18074     1395   188416        0          -998 sshd
[7516987.983594] [59622]     0 59622    18680     6679   188416        0          -998 python
[7516987.983598] [59624]     0 59624  1859266     5161   548864        0          -998 odin-agent
[7516987.983600] [59625]     0 59625   707223     9248   983040        0          -998 filebeat
[7516987.983604] [59627]     0 59627   416433    64239   774144        0          -998 odin-log-agent
[7516987.983607] [59631]     0 59631   180671    15012   385024        0          -998 python3
[7516987.983612] [61396]     0 61396   791287     3189   352256        0          -998 client
[7516987.983615] [61641]     0 61641  1844642    29089   946176        0          -998 client
[7516987.983765] [ 9236]     0  9236     2642      467    53248        0          -998 php_scanner
[7516987.983911] [42898]     0 42898    15543      838   167936        0          -998 su
[7516987.983915] [42900]  1000 42900     3673      867    77824        0          -998 exec_script_vr2
[7516987.983918] [42925]  1000 42925    36475    19033   335872        0          -998 python
[7516987.983921] [57146]  1000 57146     3673      848    73728        0          -998 exec_script_J2p
[7516987.983925] [57195]  1000 57195   186359    22958   491520        0          -998 python2
[7516987.983928] [58376]  1000 58376   275764    14402   290816        0          -998 rosmaster
[7516987.983931] [58395]  1000 58395   155166     4449   245760        0          -998 rosout
[7516987.983935] [58406]  1000 58406 18285584  3967322 37101568        0          -998 data_sim
[7516987.984221] oom-kill:constraint=CONSTRAINT_MEMCG,nodemask=(null),cpuset=3aa16c9482ae3a6f6b78bda68a55d32c87c99b985e0f11331cddf05af6c4d753,mems_allowed=0-1,oom_memcg=/kubepods/podf1c273d3-9b36-11ea-b3df-246e9693c184,task_memcg=/kubepods/podf1c273d3-9b36-11ea-b3df-246e9693c184/1f246a3eeea8f70bf91141eeaf1805346a666e225f823906485ea0b6c37dfc3d,task=pause,pid=5740,uid=0
[7516987.984254] Memory cgroup out of memory: Killed process 5740 (pause) total-vm:1028kB, anon-rss:4kB, file-rss:0kB, shmem-rss:0kB
[7516988.092344] oom_reaper: reaped process 5740 (pause), now anon-rss:0kB, file-rss:0kB, shmem-rss:0kB

We can find that the first scanned process 5740 (pause) was killed, but
its rss is only one page.  That is because, when we calculate the oom
badness in oom_badness(), we always ignore the negtive point and convert
all of these negtive points to 1.  Now as oom_score_adj of all the
processes in this targeted memcg have the same value -998, the points of
these processes are all negtive value.  As a result, the first scanned
process will be killed.

The oom_socre_adj (-998) in this memcg is set by kubelet, because it is a
a Guaranteed pod, which has higher priority to prevent from being killed
by system oom.

To fix this issue, we should make the calculation of oom point more
accurate.  We can achieve it by convert the chosen_point from 'unsigned
long' to 'long'.

[cai@lca.pw: reported a issue in the previous version]
[mhocko@suse.com: fixed the issue reported by Cai]
[mhocko@suse.com: add the comment in proc_oom_score()]
[laoar.shao@gmail.com: v3]
  Link: http://lkml.kernel.org/r/1594396651-9931-1-git-send-email-laoar.shao@gmail.com

Signed-off-by: Yafang Shao 
Signed-off-by: Andrew Morton 
Tested-by: Naresh Kamboju 
Acked-by: Michal Hocko 
Cc: David Rientjes 
Cc: Qian Cai 
Link: http://lkml.kernel.org/r/1594309987-9919-1-git-send-email-laoar.shao@gmail.com
Signed-off-by: Linus Torvalds

proc: allow access in init userns for map_files with CAP_CHECKPOINT_RESTORE

2020-07-19T18:14:42+00:00

Opening files in /proc/pid/map_files when the current user is
CAP_CHECKPOINT_RESTORE capable in the root namespace is useful for
checkpointing and restoring to recover files that are unreachable via
the file system such as deleted files, or memfd files.

Signed-off-by: Adrian Reber 
Signed-off-by: Nicolas Viennot 
Reviewed-by: Cyrill Gorcunov 
Reviewed-by: Serge Hallyn 
Link: https://lore.kernel.org/r/20200719100418.2112740-5-areber@redhat.com
Signed-off-by: Christian Brauner