linux-stable.git/fs/proc/base.c, branch v3.10.78

userns: Add a knob to disable setgroups on a per user namespace basis

2015-01-08T17:58:16+00:00

commit 9cc46516ddf497ea16e8d7cb986ae03a0f6b92f8 upstream.

- Expose the knob to user space through a proc file /proc//setgroups

  A value of "deny" means the setgroups system call is disabled in the
  current processes user namespace and can not be enabled in the
  future in this user namespace.

  A value of "allow" means the segtoups system call is enabled.

- Descendant user namespaces inherit the value of setgroups from
  their parents.

- A proc file is used (instead of a sysctl) as sysctls currently do
  not allow checking the permissions at open time.

- Writing to the proc file is restricted to before the gid_map
  for the user namespace is set.

  This ensures that disabling setgroups at a user namespace
  level will never remove the ability to call setgroups
  from a process that already has that ability.

  A process may opt in to the setgroups disable for itself by
  creating, entering and configuring a user namespace or by calling
  setns on an existing user namespace with setgroups disabled.
  Processes without privileges already can not call setgroups so this
  is a noop.  Prodcess with privilege become processes without
  privilege when entering a user namespace and as with any other path
  to dropping privilege they would not have the ability to call
  setgroups.  So this remains within the bounds of what is possible
  without a knob to disable setgroups permanently in a user namespace.

Signed-off-by: "Eric W. Biederman" 
Signed-off-by: Greg Kroah-Hartman

fs/proc/base.c: fix GPF in /proc/$PID/map_files

2014-03-24T04:38:17+00:00

commit 70335abb2689c8cd5df91bf2d95a65649addf50b upstream.

The expected logic of proc_map_files_get_link() is either to return 0
and initialize 'path' or return an error and leave 'path' uninitialized.

By the time dname_to_vma_addr() returns 0 the corresponding vma may have
already be gone.  In this case the path is not initialized but the
return value is still 0.  This results in 'general protection fault'
inside d_path().

Steps to reproduce:

  CONFIG_CHECKPOINT_RESTORE=y

    fd = open(...);
    while (1) {
        mmap(fd, ...);
        munmap(fd, ...);
    }

  ls -la /proc/$PID/map_files

Addresses https://bugzilla.kernel.org/show_bug.cgi?id=68991

Signed-off-by: Artem Fetishev 
Signed-off-by: Aleksandr Terekhov 
Reported-by: 
Acked-by: Pavel Emelyanov 
Acked-by: Cyrill Gorcunov 
Reviewed-by: "Eric W. Biederman" 
Signed-off-by: Andrew Morton 
Signed-off-by: Linus Torvalds 
Signed-off-by: Greg Kroah-Hartman

posix-timers: Show clock ID in proc file

2013-05-28T09:41:14+00:00

Expand information about posix-timers in /proc//timers by adding
info about clock, with which the timer was created. I.e. in the forth
line of timer info after "notify:" line go "ClockID: ".

Signed-off-by: Pavel Tikhomirov 
Cc: Michael Kerrisk 
Cc: Matthew Helsley 
Cc: Pavel Emelyanov 
Link: http://lkml.kernel.org/r/1368742323-46949-2-git-send-email-snorcht@gmail.com
Signed-off-by: Thomas Gleixner

Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs

2013-05-02T00:51:54+00:00

Pull VFS updates from Al Viro,

Misc cleanups all over the place, mainly wrt /proc interfaces (switch
create_proc_entry to proc_create(), get rid of the deprecated
create_proc_read_entry() in favor of using proc_create_data() and
seq_file etc).

7kloc removed.

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs: (204 commits)
  don't bother with deferred freeing of fdtables
  proc: Move non-public stuff from linux/proc_fs.h to fs/proc/internal.h
  proc: Make the PROC_I() and PDE() macros internal to procfs
  proc: Supply a function to remove a proc entry by PDE
  take cgroup_open() and cpuset_open() to fs/proc/base.c
  ppc: Clean up scanlog
  ppc: Clean up rtas_flash driver somewhat
  hostap: proc: Use remove_proc_subtree()
  drm: proc: Use remove_proc_subtree()
  drm: proc: Use minor->index to label things, not PDE->name
  drm: Constify drm_proc_list[]
  zoran: Don't print proc_dir_entry data in debug
  reiserfs: Don't access the proc_dir_entry in r_open(), r_start() r_show()
  proc: Supply an accessor for getting the data from a PDE's parent
  airo: Use remove_proc_subtree()
  rtl8192u: Don't need to save device proc dir PDE
  rtl8187se: Use a dir under /proc/net/r8180/
  proc: Add proc_mkdir_data()
  proc: Move some bits from linux/proc_fs.h to linux/{of.h,signal.h,tty.h}
  proc: Move PDE_NET() to fs/proc/proc_net.c
  ...

take cgroup_open() and cpuset_open() to fs/proc/base.c

2013-05-01T21:29:46+00:00

Signed-off-by: Al Viro

proc: Uninline pid_delete_dentry()

2013-05-01T21:29:39+00:00

Uninline pid_delete_dentry() as it's only used by three function pointers.

Signed-off-by: David Howells 
Signed-off-by: Al Viro

fs, proc: truncate /proc/pid/comm writes to first TASK_COMM_LEN bytes

2013-05-01T00:04:07+00:00

Currently, a write to a procfs file will return the number of bytes
successfully written.  If the actual string is longer than this, the
remainder of the string will not be be written and userspace will
complete the operation by issuing additional write()s.

Hence

	$ echo -n "abcdefghijklmnopqrs" > /proc/self/comm

results in

	$ cat /proc/$$/comm
	pqrs

since the final four bytes were written with a second write() since
TASK_COMM_LEN == 16.  This is obviously an undesired result and not
equivalent to prctl(PR_SET_NAME).  The implementation should not need to
know the definition of TASK_COMM_LEN.

This patch truncates the string to the first TASK_COMM_LEN bytes and
returns the bytes written as the length of the string written so the
second write() is suppressed.

	$ cat /proc/$$/comm
	abcdefghijklmno

Signed-off-by: David Rientjes 
Acked-by: John Stultz 
Signed-off-by: Andrew Morton 
Signed-off-by: Linus Torvalds

posix-timers: Show sigevent info in proc file

2013-04-17T18:51:01+00:00

Previous patch added proc file to list posix timers created by task.
Expand the information provided in this file by adding info about
notification method, with which timers were created. I.e. after
the "ID:" line there go

1. "signal:" line, that shows signal number and sigval bits;
2. "notify:" line, that shows the timer notification method.

Thus the timer entry would looke like this:

ID: 123
signal: 14/0000000000b005d0
notify: signal/pid.732

This information is enough to understand how timer_create() was called
for each particular timer.

Signed-off-by: Pavel Emelyanov 
Cc: Peter Zijlstra 
Cc: Michael Kerrisk 
Cc: Matthew Helsley 
Link: http://lkml.kernel.org/r/513DA024.80404@parallels.com
Signed-off-by: Thomas Gleixner

posix-timers: Introduce /proc/PID/timers file

2013-04-17T18:51:01+00:00

Currently kernel doesn't provide any API for getting info about what
posix timers are configured by processes. It's implied, that a process
which configured some timers, knows what it did. However, for external
tools it's impossible to get this information. In particular, this is
critical for checkpoint-restore project to have this info.

Introduce a per-pid proc file with information about posix
timers. Since these timers are shared between threads, this file is
present on tgid level only, no such thing in tid subdirs.

The file format is expected to be the "/proc//smaps"-like,
i.e. each timer will occupy seveal lines to allow for future
extending.

Each new timer entry starts with the

ID: 

line which is added by this patch.

Signed-off-by: Pavel Emelyanov 
Cc: Peter Zijlstra 
Cc: Michael Kerrisk 
Cc: Matthew Helsley 
Link: http://lkml.kernel.org/r/513DA00D.6070009@parallels.com
Signed-off-by: Thomas Gleixner

procfs: switch /proc/self away from proc_dir_entry

2013-04-09T18:13:05+00:00

Just have it pinned in dcache all along and let procfs ->kill_sb()
drop it before kill_anon_super().

Signed-off-by: Al Viro