linux-stable.git/fs/nilfs2, branch v3.5

nilfs2: ensure proper cache clearing for gc-inodes

2012-06-20T21:39:35+00:00

A gc-inode is a pseudo inode used to buffer the blocks to be moved by
garbage collection.

Block caches of gc-inodes must be cleared every time a garbage collection
function (nilfs_clean_segments) completes.  Otherwise, stale blocks
buffered in the caches may be wrongly reused in successive calls of the GC
function.

For user files, this is not a problem because their gc-inodes are
distinguished by a checkpoint number as well as an inode number.  They
never buffer different blocks if either an inode number, a checkpoint
number, or a block offset differs.

However, gc-inodes of sufile, cpfile and DAT file can store different data
for the same block offset.  Thus, the nilfs_clean_segments function can
move incorrect block for these meta-data files if an old block is cached.
I found this is really causing meta-data corruption in nilfs.

This fixes the issue by ensuring cache clear of gc-inodes and resolves
reported GC problems including checkpoint file corruption, b-tree
corruption, and the following warning during GC.

  nilfs_palloc_freev: entry number 307234 already freed.
  ...

Signed-off-by: Ryusuke Konishi 
Tested-by: Ryusuke Konishi 
Cc: 	[2.6.37+]
Signed-off-by: Andrew Morton 
Signed-off-by: Linus Torvalds

Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs

2012-06-01T17:34:35+00:00

Pull vfs changes from Al Viro.
 "A lot of misc stuff.  The obvious groups:
   * Miklos' atomic_open series; kills the damn abuse of
     ->d_revalidate() by NFS, which was the major stumbling block for
     all work in that area.
   * ripping security_file_mmap() and dealing with deadlocks in the
     area; sanitizing the neighborhood of vm_mmap()/vm_munmap() in
     general.
   * ->encode_fh() switched to saner API; insane fake dentry in
     mm/cleancache.c gone.
   * assorted annotations in fs (endianness, __user)
   * parts of Artem's ->s_dirty work (jff2 and reiserfs parts)
   * ->update_time() work from Josef.
   * other bits and pieces all over the place.

  Normally it would've been in two or three pull requests, but
  signal.git stuff had eaten a lot of time during this cycle ;-/"

Fix up trivial conflicts in Documentation/filesystems/vfs.txt (the
'truncate_range' inode method was removed by the VM changes, the VFS
update adds an 'update_time()' method), and in fs/btrfs/ulist.[ch] (due
to sparse fix added twice, with other changes nearby).

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs: (95 commits)
  nfs: don't open in ->d_revalidate
  vfs: retry last component if opening stale dentry
  vfs: nameidata_to_filp(): don't throw away file on error
  vfs: nameidata_to_filp(): inline __dentry_open()
  vfs: do_dentry_open(): don't put filp
  vfs: split __dentry_open()
  vfs: do_last() common post lookup
  vfs: do_last(): add audit_inode before open
  vfs: do_last(): only return EISDIR for O_CREAT
  vfs: do_last(): check LOOKUP_DIRECTORY
  vfs: do_last(): make ENOENT exit RCU safe
  vfs: make follow_link check RCU safe
  vfs: do_last(): use inode variable
  vfs: do_last(): inline walk_component()
  vfs: do_last(): make exit RCU safe
  vfs: split do_lookup()
  Btrfs: move over to use ->update_time
  fs: introduce inode operation ->update_time
  reiserfs: get rid of resierfs_sync_super
  reiserfs: mark the superblock as dirty a bit later
  ...

nilfs2: flush disk caches in syncing

2012-06-01T00:49:27+00:00

There are two cases that the cache flush is needed to avoid data loss
against unexpected hang or power failure.  One is sync file function (i.e.
 nilfs_sync_file) and another is checkpointing ioctl.

This issues a cache flush request to device for such cases if barrier
mount option is enabled, and makes sure data really is on persistent
storage on their completion.

Signed-off-by: Ryusuke Konishi 
Signed-off-by: Andrew Morton 
Signed-off-by: Linus Torvalds

->encode_fh() API change

2012-05-30T03:28:33+00:00

pass inode + parent's inode or NULL instead of dentry + bool saying
whether we want the parent or not.

NOTE: that needs ceph fix folded in.

Signed-off-by: Al Viro

Merge tag 'writeback' of git://git.kernel.org/pub/scm/linux/kernel/git/wfg/linux

2012-05-28T16:54:45+00:00

Pull writeback tree from Wu Fengguang:
 "Mainly from Jan Kara to avoid iput() in the flusher threads."

* tag 'writeback' of git://git.kernel.org/pub/scm/linux/kernel/git/wfg/linux:
  writeback: Avoid iput() from flusher thread
  vfs: Rename end_writeback() to clear_inode()
  vfs: Move waiting for inode writeback from end_writeback() to evict_inode()
  writeback: Refactor writeback_single_inode()
  writeback: Remove wb->list_lock from writeback_single_inode()
  writeback: Separate inode requeueing after writeback
  writeback: Move I_DIRTY_PAGES handling
  writeback: Move requeueing when I_SYNC set to writeback_sb_inodes()
  writeback: Move clearing of I_SYNC into inode_sync_complete()
  writeback: initialize global_dirty_limit
  fs: remove 8 bytes of padding from struct writeback_control on 64 bit builds
  mm: page-writeback.c: local functions should not be exposed globally

vfs: make it possible to access the dentry hash/len as one 64-bit entry

2012-05-11T02:54:35+00:00

This allows comparing hash and len in one operation on 64-bit
architectures.  Right now only __d_lookup_rcu() takes advantage of this,
since that is the case we care most about.

The use of anonymous struct/unions hides the alternate 64-bit approach
from most users, the exception being a few cases where we initialize a
'struct qstr' with a static initializer.  This makes the problematic
cases use a new QSTR_INIT() helper function for that (but initializing
just the name pointer with a "{ .name = xyzzy }" initializer remains
valid, as does just copying another qstr structure).

Signed-off-by: Linus Torvalds

vfs: Rename end_writeback() to clear_inode()

2012-05-06T05:43:41+00:00

After we moved inode_sync_wait() from end_writeback() it doesn't make sense
to call the function end_writeback() anymore. Rename it to clear_inode()
which well says what the function really does - set I_CLEAR flag.

Signed-off-by: Jan Kara 
Signed-off-by: Fengguang Wu

Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs

2012-03-21T20:36:41+00:00

Pull vfs pile 1 from Al Viro:
 "This is _not_ all; in particular, Miklos' and Jan's stuff is not there
  yet."

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs: (64 commits)
  ext4: initialization of ext4_li_mtx needs to be done earlier
  debugfs-related mode_t whack-a-mole
  hfsplus: add an ioctl to bless files
  hfsplus: change finder_info to u32
  hfsplus: initialise userflags
  qnx4: new helper - try_extent()
  qnx4: get rid of qnx4_bread/qnx4_getblk
  take removal of PF_FORKNOEXEC to flush_old_exec()
  trim includes in inode.c
  um: uml_dup_mmap() relies on ->mmap_sem being held, but activate_mm() doesn't hold it
  um: embed ->stub_pages[] into mmu_context
  gadgetfs: list_for_each_safe() misuse
  ocfs2: fix leaks on failure exits in module_init
  ecryptfs: make register_filesystem() the last potential failure exit
  ntfs: forgets to unregister sysctls on register_filesystem() failure
  logfs: missing cleanup on register_filesystem() failure
  jfs: mising cleanup on register_filesystem() failure
  make configfs_pin_fs() return root dentry on success
  configfs: configfs_create_dir() has parent dentry in dentry->d_parent
  configfs: sanitize configfs_create()
  ...

switch open-coded instances of d_make_root() to new helper

2012-03-21T01:29:35+00:00

Signed-off-by: Al Viro

vfs: check i_nlink limits in vfs_{mkdir,rename_dir,link}

2012-03-21T01:29:32+00:00

New field of struct super_block - ->s_max_links.  Maximal allowed
value of ->i_nlink or 0; in the latter case all checks still need
to be done in ->link/->mkdir/->rename instances.  Note that this
limit applies both to directoris and to non-directories.

Signed-off-by: Al Viro