<feed xmlns='http://www.w3.org/2005/Atom'>
<title>linux-stable.git/fs/lockd/host.c, branch linux-4.9.y</title>
<subtitle>Linux kernel stable tree</subtitle>
<link rel='alternate' type='text/html' href='https://git.tavy.me/linux-stable.git/'/>
<entry>
<title>lockd: don't use interval-based rebinding over TCP</title>
<updated>2020-12-29T12:44:57+00:00</updated>
<author>
<name>Calum Mackay</name>
<email>calum.mackay@oracle.com</email>
</author>
<published>2020-10-28T20:16:27+00:00</published>
<link rel='alternate' type='text/html' href='https://git.tavy.me/linux-stable.git/commit/?id=2da36ce3ab91c75cff18d61c1f3d84ead9bb3365'/>
<id>2da36ce3ab91c75cff18d61c1f3d84ead9bb3365</id>
<content type='text'>
[ Upstream commit 9b82d88d5976e5f2b8015d58913654856576ace5 ]

NLM uses an interval-based rebinding, i.e. it clears the transport's
binding under certain conditions if more than 60 seconds have elapsed
since the connection was last bound.

This rebinding is not necessary for an autobind RPC client over a
connection-oriented protocol like TCP.

It can also cause problems: it is possible for nlm_bind_host() to clear
XPRT_BOUND whilst a connection worker is in the middle of trying to
reconnect, after it had already been checked in xprt_connect().

When the connection worker notices that XPRT_BOUND has been cleared
under it, in xs_tcp_finish_connecting(), that results in:

	xs_tcp_setup_socket: connect returned unhandled error -107

Worse, it's possible that the two can get into lockstep, resulting in
the same behaviour repeated indefinitely, with the above error every
300 seconds, without ever recovering, and the connection never being
established. This has been seen in practice, with a large number of NLM
client tasks, following a server restart.

The existing callers of nlm_bind_host &amp; nlm_rebind_host should not need
to force the rebind, for TCP, so restrict the interval-based rebinding
to UDP only.

For TCP, we will still rebind when needed, e.g. on timeout, and connection
error (including closure), since connection-related errors on an existing
connection, ECONNREFUSED when trying to connect, and rpc_check_timeout(),
already unconditionally clear XPRT_BOUND.

To avoid having to add the fix, and explanation, to both nlm_bind_host()
and nlm_rebind_host(), remove the duplicate code from the former, and
have it call the latter.

Drop the dprintk, which adds no value over a trace.

Signed-off-by: Calum Mackay &lt;calum.mackay@oracle.com&gt;
Fixes: 35f5a422ce1a ("SUNRPC: new interface to force an RPC rebind")
Signed-off-by: Trond Myklebust &lt;trond.myklebust@hammerspace.com&gt;
Signed-off-by: Sasha Levin &lt;sashal@kernel.org&gt;
</content>
<content type='xhtml'>
<div xmlns='http://www.w3.org/1999/xhtml'>
<pre>
[ Upstream commit 9b82d88d5976e5f2b8015d58913654856576ace5 ]

NLM uses an interval-based rebinding, i.e. it clears the transport's
binding under certain conditions if more than 60 seconds have elapsed
since the connection was last bound.

This rebinding is not necessary for an autobind RPC client over a
connection-oriented protocol like TCP.

It can also cause problems: it is possible for nlm_bind_host() to clear
XPRT_BOUND whilst a connection worker is in the middle of trying to
reconnect, after it had already been checked in xprt_connect().

When the connection worker notices that XPRT_BOUND has been cleared
under it, in xs_tcp_finish_connecting(), that results in:

	xs_tcp_setup_socket: connect returned unhandled error -107

Worse, it's possible that the two can get into lockstep, resulting in
the same behaviour repeated indefinitely, with the above error every
300 seconds, without ever recovering, and the connection never being
established. This has been seen in practice, with a large number of NLM
client tasks, following a server restart.

The existing callers of nlm_bind_host &amp; nlm_rebind_host should not need
to force the rebind, for TCP, so restrict the interval-based rebinding
to UDP only.

For TCP, we will still rebind when needed, e.g. on timeout, and connection
error (including closure), since connection-related errors on an existing
connection, ECONNREFUSED when trying to connect, and rpc_check_timeout(),
already unconditionally clear XPRT_BOUND.

To avoid having to add the fix, and explanation, to both nlm_bind_host()
and nlm_rebind_host(), remove the duplicate code from the former, and
have it call the latter.

Drop the dprintk, which adds no value over a trace.

Signed-off-by: Calum Mackay &lt;calum.mackay@oracle.com&gt;
Fixes: 35f5a422ce1a ("SUNRPC: new interface to force an RPC rebind")
Signed-off-by: Trond Myklebust &lt;trond.myklebust@hammerspace.com&gt;
Signed-off-by: Sasha Levin &lt;sashal@kernel.org&gt;
</pre>
</div>
</content>
</entry>
<entry>
<title>lockd: fix access beyond unterminated strings in prints</title>
<updated>2018-11-13T19:17:02+00:00</updated>
<author>
<name>Amir Goldstein</name>
<email>amir73il@gmail.com</email>
</author>
<published>2018-09-28T17:41:48+00:00</published>
<link rel='alternate' type='text/html' href='https://git.tavy.me/linux-stable.git/commit/?id=5c22b67bc29defe0a68f603f22456ee5c1024cbe'/>
<id>5c22b67bc29defe0a68f603f22456ee5c1024cbe</id>
<content type='text'>
commit 93f38b6fae0ea8987e22d9e6c38f8dfdccd867ee upstream.

printk format used %*s instead of %.*s, so hostname_len does not limit
the number of bytes accessed from hostname.

Signed-off-by: Amir Goldstein &lt;amir73il@gmail.com&gt;
Cc: stable@vger.kernel.org
Signed-off-by: J. Bruce Fields &lt;bfields@redhat.com&gt;
Signed-off-by: Greg Kroah-Hartman &lt;gregkh@linuxfoundation.org&gt;

</content>
<content type='xhtml'>
<div xmlns='http://www.w3.org/1999/xhtml'>
<pre>
commit 93f38b6fae0ea8987e22d9e6c38f8dfdccd867ee upstream.

printk format used %*s instead of %.*s, so hostname_len does not limit
the number of bytes accessed from hostname.

Signed-off-by: Amir Goldstein &lt;amir73il@gmail.com&gt;
Cc: stable@vger.kernel.org
Signed-off-by: J. Bruce Fields &lt;bfields@redhat.com&gt;
Signed-off-by: Greg Kroah-Hartman &lt;gregkh@linuxfoundation.org&gt;

</pre>
</div>
</content>
</entry>
<entry>
<title>lockd: get rid of reference-counted NSM RPC clients</title>
<updated>2015-10-23T19:57:27+00:00</updated>
<author>
<name>Andrey Ryabinin</name>
<email>aryabinin@virtuozzo.com</email>
</author>
<published>2015-10-07T11:39:55+00:00</published>
<link rel='alternate' type='text/html' href='https://git.tavy.me/linux-stable.git/commit/?id=0d0f4aab4e4d290138a4ae7f2ef8469e48c9a669'/>
<id>0d0f4aab4e4d290138a4ae7f2ef8469e48c9a669</id>
<content type='text'>
Currently we have reference-counted per-net NSM RPC client
which created on the first monitor request and destroyed
after the last unmonitor request. It's needed because
RPC client need to know 'utsname()-&gt;nodename', but utsname()
might be NULL when nsm_unmonitor() called.

So instead of holding the rpc client we could just save nodename
in struct nlm_host and pass it to the rpc_create().
Thus ther is no need in keeping rpc client until last
unmonitor request. We could create separate RPC clients
for each monitor/unmonitor requests.

Signed-off-by: Andrey Ryabinin &lt;aryabinin@virtuozzo.com&gt;
Signed-off-by: J. Bruce Fields &lt;bfields@redhat.com&gt;
</content>
<content type='xhtml'>
<div xmlns='http://www.w3.org/1999/xhtml'>
<pre>
Currently we have reference-counted per-net NSM RPC client
which created on the first monitor request and destroyed
after the last unmonitor request. It's needed because
RPC client need to know 'utsname()-&gt;nodename', but utsname()
might be NULL when nsm_unmonitor() called.

So instead of holding the rpc client we could just save nodename
in struct nlm_host and pass it to the rpc_create().
Thus ther is no need in keeping rpc client until last
unmonitor request. We could create separate RPC clients
for each monitor/unmonitor requests.

Signed-off-by: Andrey Ryabinin &lt;aryabinin@virtuozzo.com&gt;
Signed-off-by: J. Bruce Fields &lt;bfields@redhat.com&gt;
</pre>
</div>
</content>
</entry>
<entry>
<title>lockd: create NSM handles per net namespace</title>
<updated>2015-10-12T21:31:05+00:00</updated>
<author>
<name>Andrey Ryabinin</name>
<email>aryabinin@virtuozzo.com</email>
</author>
<published>2015-09-23T12:49:29+00:00</published>
<link rel='alternate' type='text/html' href='https://git.tavy.me/linux-stable.git/commit/?id=0ad95472bf169a3501991f8f33f5147f792a8116'/>
<id>0ad95472bf169a3501991f8f33f5147f792a8116</id>
<content type='text'>
Commit cb7323fffa85 ("lockd: create and use per-net NSM
 RPC clients on MON/UNMON requests") introduced per-net
NSM RPC clients. Unfortunately this doesn't make any sense
without per-net nsm_handle.

E.g. the following scenario could happen
Two hosts (X and Y) in different namespaces (A and B) share
the same nsm struct.

1. nsm_monitor(host_X) called =&gt; NSM rpc client created,
	nsm-&gt;sm_monitored bit set.
2. nsm_mointor(host-Y) called =&gt; nsm-&gt;sm_monitored already set,
	we just exit. Thus in namespace B ln-&gt;nsm_clnt == NULL.
3. host X destroyed =&gt; nsm-&gt;sm_count decremented to 1
4. host Y destroyed =&gt; nsm_unmonitor() =&gt; nsm_mon_unmon() =&gt; NULL-ptr
	dereference of *ln-&gt;nsm_clnt

So this could be fixed by making per-net nsm_handles list,
instead of global. Thus different net namespaces will not be able
share the same nsm_handle.

Signed-off-by: Andrey Ryabinin &lt;aryabinin@virtuozzo.com&gt;
Cc: &lt;stable@vger.kernel.org&gt;
Signed-off-by: J. Bruce Fields &lt;bfields@redhat.com&gt;
</content>
<content type='xhtml'>
<div xmlns='http://www.w3.org/1999/xhtml'>
<pre>
Commit cb7323fffa85 ("lockd: create and use per-net NSM
 RPC clients on MON/UNMON requests") introduced per-net
NSM RPC clients. Unfortunately this doesn't make any sense
without per-net nsm_handle.

E.g. the following scenario could happen
Two hosts (X and Y) in different namespaces (A and B) share
the same nsm struct.

1. nsm_monitor(host_X) called =&gt; NSM rpc client created,
	nsm-&gt;sm_monitored bit set.
2. nsm_mointor(host-Y) called =&gt; nsm-&gt;sm_monitored already set,
	we just exit. Thus in namespace B ln-&gt;nsm_clnt == NULL.
3. host X destroyed =&gt; nsm-&gt;sm_count decremented to 1
4. host Y destroyed =&gt; nsm_unmonitor() =&gt; nsm_mon_unmon() =&gt; NULL-ptr
	dereference of *ln-&gt;nsm_clnt

So this could be fixed by making per-net nsm_handles list,
instead of global. Thus different net namespaces will not be able
share the same nsm_handle.

Signed-off-by: Andrey Ryabinin &lt;aryabinin@virtuozzo.com&gt;
Cc: &lt;stable@vger.kernel.org&gt;
Signed-off-by: J. Bruce Fields &lt;bfields@redhat.com&gt;
</pre>
</div>
</content>
</entry>
<entry>
<title>Merge branch 'for-3.9' of git://linux-nfs.org/~bfields/linux</title>
<updated>2013-03-01T02:02:55+00:00</updated>
<author>
<name>Linus Torvalds</name>
<email>torvalds@linux-foundation.org</email>
</author>
<published>2013-03-01T02:02:55+00:00</published>
<link rel='alternate' type='text/html' href='https://git.tavy.me/linux-stable.git/commit/?id=b6669737d3db7df79fad07180837c23dbe581db5'/>
<id>b6669737d3db7df79fad07180837c23dbe581db5</id>
<content type='text'>
Pull nfsd changes from J Bruce Fields:
 "Miscellaneous bugfixes, plus:

   - An overhaul of the DRC cache by Jeff Layton.  The main effect is
     just to make it larger.  This decreases the chances of intermittent
     errors especially in the UDP case.  But we'll need to watch for any
     reports of performance regressions.

   - Containerized nfsd: with some limitations, we now support
     per-container nfs-service, thanks to extensive work from Stanislav
     Kinsbursky over the last year."

Some notes about conflicts, since there were *two* non-data semantic
conflicts here:

 - idr_remove_all() had been added by a memory leak fix, but has since
   become deprecated since idr_destroy() does it for us now.

 - xs_local_connect() had been added by this branch to make AF_LOCAL
   connections be synchronous, but in the meantime Trond had changed the
   calling convention in order to avoid a RCU dereference.

There were a couple of more obvious actual source-level conflicts due to
the hlist traversal changes and one just due to code changes next to
each other, but those were trivial.

* 'for-3.9' of git://linux-nfs.org/~bfields/linux: (49 commits)
  SUNRPC: make AF_LOCAL connect synchronous
  nfsd: fix compiler warning about ambiguous types in nfsd_cache_csum
  svcrpc: fix rpc server shutdown races
  svcrpc: make svc_age_temp_xprts enqueue under sv_lock
  lockd: nlmclnt_reclaim(): avoid stack overflow
  nfsd: enable NFSv4 state in containers
  nfsd: disable usermode helper client tracker in container
  nfsd: use proper net while reading "exports" file
  nfsd: containerize NFSd filesystem
  nfsd: fix comments on nfsd_cache_lookup
  SUNRPC: move cache_detail-&gt;cache_request callback call to cache_read()
  SUNRPC: remove "cache_request" argument in sunrpc_cache_pipe_upcall() function
  SUNRPC: rework cache upcall logic
  SUNRPC: introduce cache_detail-&gt;cache_request callback
  NFS: simplify and clean cache library
  NFS: use SUNRPC cache creation and destruction helper for DNS cache
  nfsd4: free_stid can be static
  nfsd: keep a checksum of the first 256 bytes of request
  sunrpc: trim off trailing checksum before returning decrypted or integrity authenticated buffer
  sunrpc: fix comment in struct xdr_buf definition
  ...
</content>
<content type='xhtml'>
<div xmlns='http://www.w3.org/1999/xhtml'>
<pre>
Pull nfsd changes from J Bruce Fields:
 "Miscellaneous bugfixes, plus:

   - An overhaul of the DRC cache by Jeff Layton.  The main effect is
     just to make it larger.  This decreases the chances of intermittent
     errors especially in the UDP case.  But we'll need to watch for any
     reports of performance regressions.

   - Containerized nfsd: with some limitations, we now support
     per-container nfs-service, thanks to extensive work from Stanislav
     Kinsbursky over the last year."

Some notes about conflicts, since there were *two* non-data semantic
conflicts here:

 - idr_remove_all() had been added by a memory leak fix, but has since
   become deprecated since idr_destroy() does it for us now.

 - xs_local_connect() had been added by this branch to make AF_LOCAL
   connections be synchronous, but in the meantime Trond had changed the
   calling convention in order to avoid a RCU dereference.

There were a couple of more obvious actual source-level conflicts due to
the hlist traversal changes and one just due to code changes next to
each other, but those were trivial.

* 'for-3.9' of git://linux-nfs.org/~bfields/linux: (49 commits)
  SUNRPC: make AF_LOCAL connect synchronous
  nfsd: fix compiler warning about ambiguous types in nfsd_cache_csum
  svcrpc: fix rpc server shutdown races
  svcrpc: make svc_age_temp_xprts enqueue under sv_lock
  lockd: nlmclnt_reclaim(): avoid stack overflow
  nfsd: enable NFSv4 state in containers
  nfsd: disable usermode helper client tracker in container
  nfsd: use proper net while reading "exports" file
  nfsd: containerize NFSd filesystem
  nfsd: fix comments on nfsd_cache_lookup
  SUNRPC: move cache_detail-&gt;cache_request callback call to cache_read()
  SUNRPC: remove "cache_request" argument in sunrpc_cache_pipe_upcall() function
  SUNRPC: rework cache upcall logic
  SUNRPC: introduce cache_detail-&gt;cache_request callback
  NFS: simplify and clean cache library
  NFS: use SUNRPC cache creation and destruction helper for DNS cache
  nfsd4: free_stid can be static
  nfsd: keep a checksum of the first 256 bytes of request
  sunrpc: trim off trailing checksum before returning decrypted or integrity authenticated buffer
  sunrpc: fix comment in struct xdr_buf definition
  ...
</pre>
</div>
</content>
</entry>
<entry>
<title>hlist: drop the node parameter from iterators</title>
<updated>2013-02-28T03:10:24+00:00</updated>
<author>
<name>Sasha Levin</name>
<email>sasha.levin@oracle.com</email>
</author>
<published>2013-02-28T01:06:00+00:00</published>
<link rel='alternate' type='text/html' href='https://git.tavy.me/linux-stable.git/commit/?id=b67bfe0d42cac56c512dd5da4b1b347a23f4b70a'/>
<id>b67bfe0d42cac56c512dd5da4b1b347a23f4b70a</id>
<content type='text'>
I'm not sure why, but the hlist for each entry iterators were conceived

        list_for_each_entry(pos, head, member)

The hlist ones were greedy and wanted an extra parameter:

        hlist_for_each_entry(tpos, pos, head, member)

Why did they need an extra pos parameter? I'm not quite sure. Not only
they don't really need it, it also prevents the iterator from looking
exactly like the list iterator, which is unfortunate.

Besides the semantic patch, there was some manual work required:

 - Fix up the actual hlist iterators in linux/list.h
 - Fix up the declaration of other iterators based on the hlist ones.
 - A very small amount of places were using the 'node' parameter, this
 was modified to use 'obj-&gt;member' instead.
 - Coccinelle didn't handle the hlist_for_each_entry_safe iterator
 properly, so those had to be fixed up manually.

The semantic patch which is mostly the work of Peter Senna Tschudin is here:

@@
iterator name hlist_for_each_entry, hlist_for_each_entry_continue, hlist_for_each_entry_from, hlist_for_each_entry_rcu, hlist_for_each_entry_rcu_bh, hlist_for_each_entry_continue_rcu_bh, for_each_busy_worker, ax25_uid_for_each, ax25_for_each, inet_bind_bucket_for_each, sctp_for_each_hentry, sk_for_each, sk_for_each_rcu, sk_for_each_from, sk_for_each_safe, sk_for_each_bound, hlist_for_each_entry_safe, hlist_for_each_entry_continue_rcu, nr_neigh_for_each, nr_neigh_for_each_safe, nr_node_for_each, nr_node_for_each_safe, for_each_gfn_indirect_valid_sp, for_each_gfn_sp, for_each_host;

type T;
expression a,c,d,e;
identifier b;
statement S;
@@

-T b;
    &lt;+... when != b
(
hlist_for_each_entry(a,
- b,
c, d) S
|
hlist_for_each_entry_continue(a,
- b,
c) S
|
hlist_for_each_entry_from(a,
- b,
c) S
|
hlist_for_each_entry_rcu(a,
- b,
c, d) S
|
hlist_for_each_entry_rcu_bh(a,
- b,
c, d) S
|
hlist_for_each_entry_continue_rcu_bh(a,
- b,
c) S
|
for_each_busy_worker(a, c,
- b,
d) S
|
ax25_uid_for_each(a,
- b,
c) S
|
ax25_for_each(a,
- b,
c) S
|
inet_bind_bucket_for_each(a,
- b,
c) S
|
sctp_for_each_hentry(a,
- b,
c) S
|
sk_for_each(a,
- b,
c) S
|
sk_for_each_rcu(a,
- b,
c) S
|
sk_for_each_from
-(a, b)
+(a)
S
+ sk_for_each_from(a) S
|
sk_for_each_safe(a,
- b,
c, d) S
|
sk_for_each_bound(a,
- b,
c) S
|
hlist_for_each_entry_safe(a,
- b,
c, d, e) S
|
hlist_for_each_entry_continue_rcu(a,
- b,
c) S
|
nr_neigh_for_each(a,
- b,
c) S
|
nr_neigh_for_each_safe(a,
- b,
c, d) S
|
nr_node_for_each(a,
- b,
c) S
|
nr_node_for_each_safe(a,
- b,
c, d) S
|
- for_each_gfn_sp(a, c, d, b) S
+ for_each_gfn_sp(a, c, d) S
|
- for_each_gfn_indirect_valid_sp(a, c, d, b) S
+ for_each_gfn_indirect_valid_sp(a, c, d) S
|
for_each_host(a,
- b,
c) S
|
for_each_host_safe(a,
- b,
c, d) S
|
for_each_mesh_entry(a,
- b,
c, d) S
)
    ...+&gt;

[akpm@linux-foundation.org: drop bogus change from net/ipv4/raw.c]
[akpm@linux-foundation.org: drop bogus hunk from net/ipv6/raw.c]
[akpm@linux-foundation.org: checkpatch fixes]
[akpm@linux-foundation.org: fix warnings]
[akpm@linux-foudnation.org: redo intrusive kvm changes]
Tested-by: Peter Senna Tschudin &lt;peter.senna@gmail.com&gt;
Acked-by: Paul E. McKenney &lt;paulmck@linux.vnet.ibm.com&gt;
Signed-off-by: Sasha Levin &lt;sasha.levin@oracle.com&gt;
Cc: Wu Fengguang &lt;fengguang.wu@intel.com&gt;
Cc: Marcelo Tosatti &lt;mtosatti@redhat.com&gt;
Cc: Gleb Natapov &lt;gleb@redhat.com&gt;
Signed-off-by: Andrew Morton &lt;akpm@linux-foundation.org&gt;
Signed-off-by: Linus Torvalds &lt;torvalds@linux-foundation.org&gt;
</content>
<content type='xhtml'>
<div xmlns='http://www.w3.org/1999/xhtml'>
<pre>
I'm not sure why, but the hlist for each entry iterators were conceived

        list_for_each_entry(pos, head, member)

The hlist ones were greedy and wanted an extra parameter:

        hlist_for_each_entry(tpos, pos, head, member)

Why did they need an extra pos parameter? I'm not quite sure. Not only
they don't really need it, it also prevents the iterator from looking
exactly like the list iterator, which is unfortunate.

Besides the semantic patch, there was some manual work required:

 - Fix up the actual hlist iterators in linux/list.h
 - Fix up the declaration of other iterators based on the hlist ones.
 - A very small amount of places were using the 'node' parameter, this
 was modified to use 'obj-&gt;member' instead.
 - Coccinelle didn't handle the hlist_for_each_entry_safe iterator
 properly, so those had to be fixed up manually.

The semantic patch which is mostly the work of Peter Senna Tschudin is here:

@@
iterator name hlist_for_each_entry, hlist_for_each_entry_continue, hlist_for_each_entry_from, hlist_for_each_entry_rcu, hlist_for_each_entry_rcu_bh, hlist_for_each_entry_continue_rcu_bh, for_each_busy_worker, ax25_uid_for_each, ax25_for_each, inet_bind_bucket_for_each, sctp_for_each_hentry, sk_for_each, sk_for_each_rcu, sk_for_each_from, sk_for_each_safe, sk_for_each_bound, hlist_for_each_entry_safe, hlist_for_each_entry_continue_rcu, nr_neigh_for_each, nr_neigh_for_each_safe, nr_node_for_each, nr_node_for_each_safe, for_each_gfn_indirect_valid_sp, for_each_gfn_sp, for_each_host;

type T;
expression a,c,d,e;
identifier b;
statement S;
@@

-T b;
    &lt;+... when != b
(
hlist_for_each_entry(a,
- b,
c, d) S
|
hlist_for_each_entry_continue(a,
- b,
c) S
|
hlist_for_each_entry_from(a,
- b,
c) S
|
hlist_for_each_entry_rcu(a,
- b,
c, d) S
|
hlist_for_each_entry_rcu_bh(a,
- b,
c, d) S
|
hlist_for_each_entry_continue_rcu_bh(a,
- b,
c) S
|
for_each_busy_worker(a, c,
- b,
d) S
|
ax25_uid_for_each(a,
- b,
c) S
|
ax25_for_each(a,
- b,
c) S
|
inet_bind_bucket_for_each(a,
- b,
c) S
|
sctp_for_each_hentry(a,
- b,
c) S
|
sk_for_each(a,
- b,
c) S
|
sk_for_each_rcu(a,
- b,
c) S
|
sk_for_each_from
-(a, b)
+(a)
S
+ sk_for_each_from(a) S
|
sk_for_each_safe(a,
- b,
c, d) S
|
sk_for_each_bound(a,
- b,
c) S
|
hlist_for_each_entry_safe(a,
- b,
c, d, e) S
|
hlist_for_each_entry_continue_rcu(a,
- b,
c) S
|
nr_neigh_for_each(a,
- b,
c) S
|
nr_neigh_for_each_safe(a,
- b,
c, d) S
|
nr_node_for_each(a,
- b,
c) S
|
nr_node_for_each_safe(a,
- b,
c, d) S
|
- for_each_gfn_sp(a, c, d, b) S
+ for_each_gfn_sp(a, c, d) S
|
- for_each_gfn_indirect_valid_sp(a, c, d, b) S
+ for_each_gfn_indirect_valid_sp(a, c, d) S
|
for_each_host(a,
- b,
c) S
|
for_each_host_safe(a,
- b,
c, d) S
|
for_each_mesh_entry(a,
- b,
c, d) S
)
    ...+&gt;

[akpm@linux-foundation.org: drop bogus change from net/ipv4/raw.c]
[akpm@linux-foundation.org: drop bogus hunk from net/ipv6/raw.c]
[akpm@linux-foundation.org: checkpatch fixes]
[akpm@linux-foundation.org: fix warnings]
[akpm@linux-foudnation.org: redo intrusive kvm changes]
Tested-by: Peter Senna Tschudin &lt;peter.senna@gmail.com&gt;
Acked-by: Paul E. McKenney &lt;paulmck@linux.vnet.ibm.com&gt;
Signed-off-by: Sasha Levin &lt;sasha.levin@oracle.com&gt;
Cc: Wu Fengguang &lt;fengguang.wu@intel.com&gt;
Cc: Marcelo Tosatti &lt;mtosatti@redhat.com&gt;
Cc: Gleb Natapov &lt;gleb@redhat.com&gt;
Signed-off-by: Andrew Morton &lt;akpm@linux-foundation.org&gt;
Signed-off-by: Linus Torvalds &lt;torvalds@linux-foundation.org&gt;
</pre>
</div>
</content>
</entry>
<entry>
<title>sunrpc: move address copy/cmp/convert routines and prototypes from clnt.h to addr.h</title>
<updated>2013-02-05T14:41:14+00:00</updated>
<author>
<name>Jeff Layton</name>
<email>jlayton@redhat.com</email>
</author>
<published>2013-02-04T17:50:00+00:00</published>
<link rel='alternate' type='text/html' href='https://git.tavy.me/linux-stable.git/commit/?id=5976687a2b3d1969f02aba16b80ad3ed79be6ad3'/>
<id>5976687a2b3d1969f02aba16b80ad3ed79be6ad3</id>
<content type='text'>
These routines are used by server and client code, so having them in a
separate header would be best.

Signed-off-by: Jeff Layton &lt;jlayton@redhat.com&gt;
Acked-by: Trond Myklebust &lt;Trond.Myklebust@netapp.com&gt;
Signed-off-by: J. Bruce Fields &lt;bfields@redhat.com&gt;
</content>
<content type='xhtml'>
<div xmlns='http://www.w3.org/1999/xhtml'>
<pre>
These routines are used by server and client code, so having them in a
separate header would be best.

Signed-off-by: Jeff Layton &lt;jlayton@redhat.com&gt;
Acked-by: Trond Myklebust &lt;Trond.Myklebust@netapp.com&gt;
Signed-off-by: J. Bruce Fields &lt;bfields@redhat.com&gt;
</pre>
</div>
</content>
</entry>
<entry>
<title>lockd: Remove BUG_ON()s in fs/lockd/host.c</title>
<updated>2012-11-04T19:43:39+00:00</updated>
<author>
<name>Trond Myklebust</name>
<email>Trond.Myklebust@netapp.com</email>
</author>
<published>2012-10-15T21:26:20+00:00</published>
<link rel='alternate' type='text/html' href='https://git.tavy.me/linux-stable.git/commit/?id=a2d30a54df968c01fff4a412ac23f55832f45fe6'/>
<id>a2d30a54df968c01fff4a412ac23f55832f45fe6</id>
<content type='text'>
- Convert the non-trivial ones into WARN_ON_ONCE().
- Remove the trivial refcounting BUGs

Signed-off-by: Trond Myklebust &lt;Trond.Myklebust@netapp.com&gt;
</content>
<content type='xhtml'>
<div xmlns='http://www.w3.org/1999/xhtml'>
<pre>
- Convert the non-trivial ones into WARN_ON_ONCE().
- Remove the trivial refcounting BUGs

Signed-off-by: Trond Myklebust &lt;Trond.Myklebust@netapp.com&gt;
</pre>
</div>
</content>
</entry>
<entry>
<title>SUNRPC: service request network namespace helper introduced</title>
<updated>2012-07-27T20:49:21+00:00</updated>
<author>
<name>Stanislav Kinsbursky</name>
<email>skinsbursky@parallels.com</email>
</author>
<published>2012-07-25T12:57:06+00:00</published>
<link rel='alternate' type='text/html' href='https://git.tavy.me/linux-stable.git/commit/?id=9695c7057f4887ed54dc1e6c2ef22f72a2be1175'/>
<id>9695c7057f4887ed54dc1e6c2ef22f72a2be1175</id>
<content type='text'>
This is a cleanup patch - makes code looks simplier.
It replaces widely used rqstp-&gt;rq_xprt-&gt;xpt_net by introduced SVC_NET(rqstp).

Signed-off-by: Stanislav Kinsbursky &lt;skinsbursky@parallels.com&gt;
Signed-off-by: J. Bruce Fields &lt;bfields@redhat.com&gt;
</content>
<content type='xhtml'>
<div xmlns='http://www.w3.org/1999/xhtml'>
<pre>
This is a cleanup patch - makes code looks simplier.
It replaces widely used rqstp-&gt;rq_xprt-&gt;xpt_net by introduced SVC_NET(rqstp).

Signed-off-by: Stanislav Kinsbursky &lt;skinsbursky@parallels.com&gt;
Signed-off-by: J. Bruce Fields &lt;bfields@redhat.com&gt;
</pre>
</div>
</content>
</entry>
<entry>
<title>Lockd: add more debug to host shutdown functions</title>
<updated>2012-07-27T20:48:44+00:00</updated>
<author>
<name>Stanislav Kinsbursky</name>
<email>skinsbursky@parallels.com</email>
</author>
<published>2012-07-25T12:56:35+00:00</published>
<link rel='alternate' type='text/html' href='https://git.tavy.me/linux-stable.git/commit/?id=e2edaa98cb2527c0f1c2d825ddb45a8b2d026669'/>
<id>e2edaa98cb2527c0f1c2d825ddb45a8b2d026669</id>
<content type='text'>
Signed-off-by: Stanislav Kinsbursky &lt;skinsbursky@parallels.com&gt;
Signed-off-by: J. Bruce Fields &lt;bfields@redhat.com&gt;
</content>
<content type='xhtml'>
<div xmlns='http://www.w3.org/1999/xhtml'>
<pre>
Signed-off-by: Stanislav Kinsbursky &lt;skinsbursky@parallels.com&gt;
Signed-off-by: J. Bruce Fields &lt;bfields@redhat.com&gt;
</pre>
</div>
</content>
</entry>
</feed>
