linux-stable.git/fs/jbd2, branch v6.5.7 Linux kernel stable tree jbd2: correct the end of the journal recovery scan range 2023-09-19T10:30:22+00:00 Zhang Yi yi.zhang@huawei.com 2023-06-26T07:33:22+00:00 05874c69576c8cf0d67efb5e2bd329e0c7536f23 commit 2dfba3bb40ad8536b9fa802364f2d40da31aa88e upstream. We got a filesystem inconsistency issue below while running generic/475 I/O failure pressure test with fast_commit feature enabled. Symlink /p3/d3/d1c/d6c/dd6/dce/l101 (inode #132605) is invalid. If fast_commit feature is enabled, a special fast_commit journal area is appended to the end of the normal journal area. The journal->j_last point to the first unused block behind the normal journal area instead of the whole log area, and the journal->j_fc_last point to the first unused block behind the fast_commit journal area. While doing journal recovery, do_one_pass(PASS_SCAN) should first scan the normal journal area and turn around to the first block once it meet journal->j_last, but the wrap() macro misuse the journal->j_fc_last, so the recovering could not read the next magic block (commit block perhaps) and would end early mistakenly and missing tN and every transaction after it in the following example. Finally, it could lead to filesystem inconsistency. | normal journal area | fast commit area | +-------------------------------------------------+------------------+ | tN(rere) | tN+1 |~| tN-x |...| tN-1 | tN(front) | .... | +-------------------------------------------------+------------------+ / / / start journal->j_last journal->j_fc_last This patch fix it by use the correct ending journal->j_last. Fixes: 5b849b5f96b4 ("jbd2: fast commit recovery path") Cc: stable@kernel.org Reported-by: Theodore Ts'o <tytso@mit.edu> Link: https://lore.kernel.org/linux-ext4/20230613043120.GB1584772@mit.edu/ Signed-off-by: Zhang Yi <yi.zhang@huawei.com> Reviewed-by: Jan Kara <jack@suse.cz> Link: https://lore.kernel.org/r/20230626073322.3956567-1-yi.zhang@huaweicloud.com Signed-off-by: Theodore Ts'o <tytso@mit.edu> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> 
commit 2dfba3bb40ad8536b9fa802364f2d40da31aa88e upstream.

We got a filesystem inconsistency issue below while running generic/475
I/O failure pressure test with fast_commit feature enabled.

 Symlink /p3/d3/d1c/d6c/dd6/dce/l101 (inode #132605) is invalid.

If fast_commit feature is enabled, a special fast_commit journal area is
appended to the end of the normal journal area. The journal->j_last
point to the first unused block behind the normal journal area instead
of the whole log area, and the journal->j_fc_last point to the first
unused block behind the fast_commit journal area. While doing journal
recovery, do_one_pass(PASS_SCAN) should first scan the normal journal
area and turn around to the first block once it meet journal->j_last,
but the wrap() macro misuse the journal->j_fc_last, so the recovering
could not read the next magic block (commit block perhaps) and would end
early mistakenly and missing tN and every transaction after it in the
following example. Finally, it could lead to filesystem inconsistency.

 | normal journal area                             | fast commit area |
 +-------------------------------------------------+------------------+
 | tN(rere) | tN+1 |~| tN-x |...| tN-1 | tN(front) |       ....       |
 +-------------------------------------------------+------------------+
                     /                             /                  /
                start               journal->j_last journal->j_fc_last

This patch fix it by use the correct ending journal->j_last.

Fixes: 5b849b5f96b4 ("jbd2: fast commit recovery path")
Cc: stable@kernel.org
Reported-by: Theodore Ts'o <tytso@mit.edu>
Link: https://lore.kernel.org/linux-ext4/20230613043120.GB1584772@mit.edu/
Signed-off-by: Zhang Yi <yi.zhang@huawei.com>
Reviewed-by: Jan Kara <jack@suse.cz>
Link: https://lore.kernel.org/r/20230626073322.3956567-1-yi.zhang@huaweicloud.com
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
jbd2: check 'jh->b_transaction' before removing it from checkpoint 2023-09-19T10:30:22+00:00 Zhihao Cheng chengzhihao1@huawei.com 2023-07-14T02:55:27+00:00 2298f2589903a8bc03061b54b31fd97985ab6529 commit 590a809ff743e7bd890ba5fb36bc38e20a36de53 upstream. Following process will corrupt ext4 image: Step 1: jbd2_journal_commit_transaction __jbd2_journal_insert_checkpoint(jh, commit_transaction) // Put jh into trans1->t_checkpoint_list journal->j_checkpoint_transactions = commit_transaction // Put trans1 into journal->j_checkpoint_transactions Step 2: do_get_write_access test_clear_buffer_dirty(bh) // clear buffer dirty，set jbd dirty __jbd2_journal_file_buffer(jh, transaction) // jh belongs to trans2 Step 3: drop_cache journal_shrink_one_cp_list jbd2_journal_try_remove_checkpoint if (!trylock_buffer(bh)) // lock bh, true if (buffer_dirty(bh)) // buffer is not dirty __jbd2_journal_remove_checkpoint(jh) // remove jh from trans1->t_checkpoint_list Step 4: jbd2_log_do_checkpoint trans1 = journal->j_checkpoint_transactions // jh is not in trans1->t_checkpoint_list jbd2_cleanup_journal_tail(journal) // trans1 is done Step 5: Power cut, trans2 is not committed, jh is lost in next mounting. Fix it by checking 'jh->b_transaction' before remove it from checkpoint. Cc: stable@kernel.org Fixes: 46f881b5b175 ("jbd2: fix a race when checking checkpoint buffer busy") Signed-off-by: Zhihao Cheng <chengzhihao1@huawei.com> Signed-off-by: Zhang Yi <yi.zhang@huawei.com> Reviewed-by: Jan Kara <jack@suse.cz> Link: https://lore.kernel.org/r/20230714025528.564988-3-yi.zhang@huaweicloud.com Signed-off-by: Theodore Ts'o <tytso@mit.edu> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> 
commit 590a809ff743e7bd890ba5fb36bc38e20a36de53 upstream.

Following process will corrupt ext4 image:
Step 1:
jbd2_journal_commit_transaction
 __jbd2_journal_insert_checkpoint(jh, commit_transaction)
 // Put jh into trans1->t_checkpoint_list
 journal->j_checkpoint_transactions = commit_transaction
 // Put trans1 into journal->j_checkpoint_transactions

Step 2:
do_get_write_access
 test_clear_buffer_dirty(bh) // clear buffer dirty，set jbd dirty
 __jbd2_journal_file_buffer(jh, transaction) // jh belongs to trans2

Step 3:
drop_cache
 journal_shrink_one_cp_list
  jbd2_journal_try_remove_checkpoint
   if (!trylock_buffer(bh))  // lock bh, true
   if (buffer_dirty(bh))     // buffer is not dirty
   __jbd2_journal_remove_checkpoint(jh)
   // remove jh from trans1->t_checkpoint_list

Step 4:
jbd2_log_do_checkpoint
 trans1 = journal->j_checkpoint_transactions
 // jh is not in trans1->t_checkpoint_list
 jbd2_cleanup_journal_tail(journal)  // trans1 is done

Step 5: Power cut, trans2 is not committed, jh is lost in next mounting.

Fix it by checking 'jh->b_transaction' before remove it from checkpoint.

Cc: stable@kernel.org
Fixes: 46f881b5b175 ("jbd2: fix a race when checking checkpoint buffer busy")
Signed-off-by: Zhihao Cheng <chengzhihao1@huawei.com>
Signed-off-by: Zhang Yi <yi.zhang@huawei.com>
Reviewed-by: Jan Kara <jack@suse.cz>
Link: https://lore.kernel.org/r/20230714025528.564988-3-yi.zhang@huaweicloud.com
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
jbd2: fix checkpoint cleanup performance regression 2023-09-19T10:30:22+00:00 Zhang Yi yi.zhang@huawei.com 2023-07-14T02:55:26+00:00 8313c4a44631c8f1dfb9d3ad5e1127120287c68b commit 373ac521799d9e97061515aca6ec6621789036bb upstream. journal_clean_one_cp_list() has been merged into journal_shrink_one_cp_list(), but do chekpoint buffer cleanup from the committing process is just a best effort, it should stop scan once it meet a busy buffer, or else it will cause a lot of invalid buffer scan and checks. We catch a performance regression when doing fs_mark tests below. Test cmd: ./fs_mark -d scratch -s 1024 -n 10000 -t 1 -D 100 -N 100 Before merging checkpoint buffer cleanup: FSUse% Count Size Files/sec App Overhead 95 10000 1024 8304.9 49033 After merging checkpoint buffer cleanup: FSUse% Count Size Files/sec App Overhead 95 10000 1024 7649.0 50012 FSUse% Count Size Files/sec App Overhead 95 10000 1024 2107.1 50871 After merging checkpoint buffer cleanup, the total loop count in journal_shrink_one_cp_list() could be up to 6,261,600+ (50,000+ ~ 100,000+ in general), most of them are invalid. This patch fix it through passing 'shrink_type' into journal_shrink_one_cp_list() and add a new 'SHRINK_BUSY_STOP' to indicate it should stop once meet a busy buffer. After fix, the loop count descending back to 10,000+. After this fix: FSUse% Count Size Files/sec App Overhead 95 10000 1024 8558.4 49109 Cc: stable@kernel.org Fixes: b98dba273a0e ("jbd2: remove journal_clean_one_cp_list()") Signed-off-by: Zhang Yi <yi.zhang@huawei.com> Reviewed-by: Jan Kara <jack@suse.cz> Link: https://lore.kernel.org/r/20230714025528.564988-2-yi.zhang@huaweicloud.com Signed-off-by: Theodore Ts'o <tytso@mit.edu> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> 
commit 373ac521799d9e97061515aca6ec6621789036bb upstream.

journal_clean_one_cp_list() has been merged into
journal_shrink_one_cp_list(), but do chekpoint buffer cleanup from the
committing process is just a best effort, it should stop scan once it
meet a busy buffer, or else it will cause a lot of invalid buffer scan
and checks. We catch a performance regression when doing fs_mark tests
below.

Test cmd:
 ./fs_mark  -d  scratch  -s  1024  -n  10000  -t  1  -D  100  -N  100

Before merging checkpoint buffer cleanup:
 FSUse%        Count         Size    Files/sec     App Overhead
     95        10000         1024       8304.9            49033

After merging checkpoint buffer cleanup:
 FSUse%        Count         Size    Files/sec     App Overhead
     95        10000         1024       7649.0            50012
 FSUse%        Count         Size    Files/sec     App Overhead
     95        10000         1024       2107.1            50871

After merging checkpoint buffer cleanup, the total loop count in
journal_shrink_one_cp_list() could be up to 6,261,600+ (50,000+ ~
100,000+ in general), most of them are invalid. This patch fix it
through passing 'shrink_type' into journal_shrink_one_cp_list() and add
a new 'SHRINK_BUSY_STOP' to indicate it should stop once meet a busy
buffer. After fix, the loop count descending back to 10,000+.

After this fix:
 FSUse%        Count         Size    Files/sec     App Overhead
     95        10000         1024       8558.4            49109

Cc: stable@kernel.org
Fixes: b98dba273a0e ("jbd2: remove journal_clean_one_cp_list()")
Signed-off-by: Zhang Yi <yi.zhang@huawei.com>
Reviewed-by: Jan Kara <jack@suse.cz>
Link: https://lore.kernel.org/r/20230714025528.564988-2-yi.zhang@huaweicloud.com
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
jbd2: remove __journal_try_to_free_buffer() 2023-07-11T03:09:21+00:00 Zhang Yi yi.zhang@huawei.com 2023-06-06T13:59:28+00:00 3c55097c553c49deab60ac62c83ef17565004a97 __journal_try_to_free_buffer() has only one caller and it's logic is much simple now, so just remove it and open code in jbd2_journal_try_to_free_buffers(). Signed-off-by: Zhang Yi <yi.zhang@huawei.com> Reviewed-by: Jan Kara <jack@suse.cz> Link: https://lore.kernel.org/r/20230606135928.434610-7-yi.zhang@huaweicloud.com Signed-off-by: Theodore Ts'o <tytso@mit.edu> 
__journal_try_to_free_buffer() has only one caller and it's logic is
much simple now, so just remove it and open code in
jbd2_journal_try_to_free_buffers().

Signed-off-by: Zhang Yi <yi.zhang@huawei.com>
Reviewed-by: Jan Kara <jack@suse.cz>
Link: https://lore.kernel.org/r/20230606135928.434610-7-yi.zhang@huaweicloud.com
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
jbd2: fix a race when checking checkpoint buffer busy 2023-07-11T03:09:21+00:00 Zhang Yi yi.zhang@huawei.com 2023-06-06T13:59:27+00:00 46f881b5b1758dc4a35fba4a643c10717d0cf427 Before removing checkpoint buffer from the t_checkpoint_list, we have to check both BH_Dirty and BH_Lock bits together to distinguish buffers have not been or were being written back. But __cp_buffer_busy() checks them separately, it first check lock state and then check dirty, the window between these two checks could be raced by writing back procedure, which locks buffer and clears buffer dirty before I/O completes. So it cannot guarantee checkpointing buffers been written back to disk if some error happens later. Finally, it may clean checkpoint transactions and lead to inconsistent filesystem. jbd2_journal_forget() and __journal_try_to_free_buffer() also have the same problem (journal_unmap_buffer() escape from this issue since it's running under the buffer lock), so fix them through introducing a new helper to try holding the buffer lock and remove really clean buffer. Link: https://bugzilla.kernel.org/show_bug.cgi?id=217490 Cc: stable@vger.kernel.org Suggested-by: Jan Kara <jack@suse.cz> Signed-off-by: Zhang Yi <yi.zhang@huawei.com> Reviewed-by: Jan Kara <jack@suse.cz> Link: https://lore.kernel.org/r/20230606135928.434610-6-yi.zhang@huaweicloud.com Signed-off-by: Theodore Ts'o <tytso@mit.edu> 
Before removing checkpoint buffer from the t_checkpoint_list, we have to
check both BH_Dirty and BH_Lock bits together to distinguish buffers
have not been or were being written back. But __cp_buffer_busy() checks
them separately, it first check lock state and then check dirty, the
window between these two checks could be raced by writing back
procedure, which locks buffer and clears buffer dirty before I/O
completes. So it cannot guarantee checkpointing buffers been written
back to disk if some error happens later. Finally, it may clean
checkpoint transactions and lead to inconsistent filesystem.

jbd2_journal_forget() and __journal_try_to_free_buffer() also have the
same problem (journal_unmap_buffer() escape from this issue since it's
running under the buffer lock), so fix them through introducing a new
helper to try holding the buffer lock and remove really clean buffer.

Link: https://bugzilla.kernel.org/show_bug.cgi?id=217490
Cc: stable@vger.kernel.org
Suggested-by: Jan Kara <jack@suse.cz>
Signed-off-by: Zhang Yi <yi.zhang@huawei.com>
Reviewed-by: Jan Kara <jack@suse.cz>
Link: https://lore.kernel.org/r/20230606135928.434610-6-yi.zhang@huaweicloud.com
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
jbd2: Fix wrongly judgement for buffer head removing while doing checkpoint 2023-07-11T03:09:21+00:00 Zhihao Cheng chengzhihao1@huawei.com 2023-06-06T13:59:26+00:00 e34c8dd238d0c9368b746480f313055f5bab5040 Following process, jbd2_journal_commit_transaction // there are several dirty buffer heads in transaction->t_checkpoint_list P1 wb_workfn jbd2_log_do_checkpoint if (buffer_locked(bh)) // false __block_write_full_page trylock_buffer(bh) test_clear_buffer_dirty(bh) if (!buffer_dirty(bh)) __jbd2_journal_remove_checkpoint(jh) if (buffer_write_io_error(bh)) // false >> bh IO error occurs << jbd2_cleanup_journal_tail __jbd2_update_log_tail jbd2_write_superblock // The bh won't be replayed in next mount. , which could corrupt the ext4 image, fetch a reproducer in [Link]. Since writeback process clears buffer dirty after locking buffer head, we can fix it by try locking buffer and check dirtiness while buffer is locked, the buffer head can be removed if it is neither dirty nor locked. Link: https://bugzilla.kernel.org/show_bug.cgi?id=217490 Fixes: 470decc613ab ("[PATCH] jbd2: initial copy of files from jbd") Signed-off-by: Zhihao Cheng <chengzhihao1@huawei.com> Signed-off-by: Zhang Yi <yi.zhang@huawei.com> Reviewed-by: Jan Kara <jack@suse.cz> Link: https://lore.kernel.org/r/20230606135928.434610-5-yi.zhang@huaweicloud.com Signed-off-by: Theodore Ts'o <tytso@mit.edu> 
Following process,

jbd2_journal_commit_transaction
// there are several dirty buffer heads in transaction->t_checkpoint_list
          P1                   wb_workfn
jbd2_log_do_checkpoint
 if (buffer_locked(bh)) // false
                            __block_write_full_page
                             trylock_buffer(bh)
                             test_clear_buffer_dirty(bh)
 if (!buffer_dirty(bh))
  __jbd2_journal_remove_checkpoint(jh)
   if (buffer_write_io_error(bh)) // false
                             >> bh IO error occurs <<
 jbd2_cleanup_journal_tail
  __jbd2_update_log_tail
   jbd2_write_superblock
   // The bh won't be replayed in next mount.
, which could corrupt the ext4 image, fetch a reproducer in [Link].

Since writeback process clears buffer dirty after locking buffer head,
we can fix it by try locking buffer and check dirtiness while buffer is
locked, the buffer head can be removed if it is neither dirty nor locked.

Link: https://bugzilla.kernel.org/show_bug.cgi?id=217490
Fixes: 470decc613ab ("[PATCH] jbd2: initial copy of files from jbd")
Signed-off-by: Zhihao Cheng <chengzhihao1@huawei.com>
Signed-off-by: Zhang Yi <yi.zhang@huawei.com>
Reviewed-by: Jan Kara <jack@suse.cz>
Link: https://lore.kernel.org/r/20230606135928.434610-5-yi.zhang@huaweicloud.com
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
jbd2: remove journal_clean_one_cp_list() 2023-07-11T03:09:21+00:00 Zhang Yi yi.zhang@huawei.com 2023-06-06T13:59:25+00:00 b98dba273a0e47dbfade89c9af73c5b012a4eabb journal_clean_one_cp_list() and journal_shrink_one_cp_list() are almost the same, so merge them into journal_shrink_one_cp_list(), remove the nr_to_scan parameter, always scan and try to free the whole checkpoint list. Signed-off-by: Zhang Yi <yi.zhang@huawei.com> Reviewed-by: Jan Kara <jack@suse.cz> Link: https://lore.kernel.org/r/20230606135928.434610-4-yi.zhang@huaweicloud.com Signed-off-by: Theodore Ts'o <tytso@mit.edu> 
journal_clean_one_cp_list() and journal_shrink_one_cp_list() are almost
the same, so merge them into journal_shrink_one_cp_list(), remove the
nr_to_scan parameter, always scan and try to free the whole checkpoint
list.

Signed-off-by: Zhang Yi <yi.zhang@huawei.com>
Reviewed-by: Jan Kara <jack@suse.cz>
Link: https://lore.kernel.org/r/20230606135928.434610-4-yi.zhang@huaweicloud.com
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
jbd2: remove t_checkpoint_io_list 2023-07-11T03:09:21+00:00 Zhang Yi yi.zhang@huawei.com 2023-06-06T13:59:24+00:00 be22255360f80d3af789daad00025171a65424a5 Since t_checkpoint_io_list was stop using in jbd2_log_do_checkpoint() now, it's time to remove the whole t_checkpoint_io_list logic. Signed-off-by: Zhang Yi <yi.zhang@huawei.com> Reviewed-by: Jan Kara <jack@suse.cz> Link: https://lore.kernel.org/r/20230606135928.434610-3-yi.zhang@huaweicloud.com Signed-off-by: Theodore Ts'o <tytso@mit.edu> 
Since t_checkpoint_io_list was stop using in jbd2_log_do_checkpoint()
now, it's time to remove the whole t_checkpoint_io_list logic.

Signed-off-by: Zhang Yi <yi.zhang@huawei.com>
Reviewed-by: Jan Kara <jack@suse.cz>
Link: https://lore.kernel.org/r/20230606135928.434610-3-yi.zhang@huaweicloud.com
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
jbd2: recheck chechpointing non-dirty buffer 2023-07-11T03:09:21+00:00 Zhang Yi yi.zhang@huawei.com 2023-06-06T13:59:23+00:00 c2d6fd9d6f35079f1669f0100f05b46708c74b7f There is a long-standing metadata corruption issue that happens from time to time, but it's very difficult to reproduce and analyse, benefit from the JBD2_CYCLE_RECORD option, we found out that the problem is the checkpointing process miss to write out some buffers which are raced by another do_get_write_access(). Looks below for detail. jbd2_log_do_checkpoint() //transaction X //buffer A is dirty and not belones to any transaction __buffer_relink_io() //move it to the IO list __flush_batch() write_dirty_buffer() do_get_write_access() clear_buffer_dirty __jbd2_journal_file_buffer() //add buffer A to a new transaction Y lock_buffer(bh) //doesn't write out __jbd2_journal_remove_checkpoint() //finish checkpoint except buffer A //filesystem corrupt if the new transaction Y isn't fully write out. Due to the t_checkpoint_list walking loop in jbd2_log_do_checkpoint() have already handles waiting for buffers under IO and re-added new transaction to complete commit, and it also removing cleaned buffers, this makes sure the list will eventually get empty. So it's fine to leave buffers on the t_checkpoint_list while flushing out and completely stop using the t_checkpoint_io_list. Cc: stable@vger.kernel.org Suggested-by: Jan Kara <jack@suse.cz> Signed-off-by: Zhang Yi <yi.zhang@huawei.com> Tested-by: Zhihao Cheng <chengzhihao1@huawei.com> Reviewed-by: Jan Kara <jack@suse.cz> Link: https://lore.kernel.org/r/20230606135928.434610-2-yi.zhang@huaweicloud.com Signed-off-by: Theodore Ts'o <tytso@mit.edu> 
There is a long-standing metadata corruption issue that happens from
time to time, but it's very difficult to reproduce and analyse, benefit
from the JBD2_CYCLE_RECORD option, we found out that the problem is the
checkpointing process miss to write out some buffers which are raced by
another do_get_write_access(). Looks below for detail.

jbd2_log_do_checkpoint() //transaction X
 //buffer A is dirty and not belones to any transaction
 __buffer_relink_io() //move it to the IO list
 __flush_batch()
  write_dirty_buffer()
                             do_get_write_access()
                             clear_buffer_dirty
                             __jbd2_journal_file_buffer()
                             //add buffer A to a new transaction Y
   lock_buffer(bh)
   //doesn't write out
 __jbd2_journal_remove_checkpoint()
 //finish checkpoint except buffer A
 //filesystem corrupt if the new transaction Y isn't fully write out.

Due to the t_checkpoint_list walking loop in jbd2_log_do_checkpoint()
have already handles waiting for buffers under IO and re-added new
transaction to complete commit, and it also removing cleaned buffers,
this makes sure the list will eventually get empty. So it's fine to
leave buffers on the t_checkpoint_list while flushing out and completely
stop using the t_checkpoint_io_list.

Cc: stable@vger.kernel.org
Suggested-by: Jan Kara <jack@suse.cz>
Signed-off-by: Zhang Yi <yi.zhang@huawei.com>
Tested-by: Zhihao Cheng <chengzhihao1@huawei.com>
Reviewed-by: Jan Kara <jack@suse.cz>
Link: https://lore.kernel.org/r/20230606135928.434610-2-yi.zhang@huaweicloud.com
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Merge tag 'ext4_for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tytso/ext4 2023-06-29T20:18:36+00:00 Linus Torvalds torvalds@linux-foundation.org 2023-06-29T20:18:36+00:00 53ea167b212f675e40420498e46fa31553b406ac Pull ext4 updates from Ted Ts'o: "Various cleanups and bug fixes in ext4's extent status tree, journalling, and block allocator subsystems. Also improve performance for parallel DIO overwrites" * tag 'ext4_for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tytso/ext4: (55 commits) ext4: avoid updating the superblock on a r/o mount if not needed jbd2: skip reading super block if it has been verified ext4: fix to check return value of freeze_bdev() in ext4_shutdown() ext4: refactoring to use the unified helper ext4_quotas_off() ext4: turn quotas off if mount failed after enabling quotas ext4: update doc about journal superblock description ext4: add journal cycled recording support jbd2: continue to record log between each mount jbd2: remove j_format_version jbd2: factor out journal initialization from journal_get_superblock() jbd2: switch to check format version in superblock directly jbd2: remove unused feature macros ext4: ext4_put_super: Remove redundant checking for 'sbi->s_journal_bdev' ext4: Fix reusing stale buffer heads from last failed mounting ext4: allow concurrent unaligned dio overwrites ext4: clean up mballoc criteria comments ext4: make ext4_zeroout_es() return void ext4: make ext4_es_insert_extent() return void ext4: make ext4_es_insert_delayed_block() return void ext4: make ext4_es_remove_extent() return void ... 
Pull ext4 updates from Ted Ts'o:
 "Various cleanups and bug fixes in ext4's extent status tree,
  journalling, and block allocator subsystems.

  Also improve performance for parallel DIO overwrites"

* tag 'ext4_for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tytso/ext4: (55 commits)
  ext4: avoid updating the superblock on a r/o mount if not needed
  jbd2: skip reading super block if it has been verified
  ext4: fix to check return value of freeze_bdev() in ext4_shutdown()
  ext4: refactoring to use the unified helper ext4_quotas_off()
  ext4: turn quotas off if mount failed after enabling quotas
  ext4: update doc about journal superblock description
  ext4: add journal cycled recording support
  jbd2: continue to record log between each mount
  jbd2: remove j_format_version
  jbd2: factor out journal initialization from journal_get_superblock()
  jbd2: switch to check format version in superblock directly
  jbd2: remove unused feature macros
  ext4: ext4_put_super: Remove redundant checking for 'sbi->s_journal_bdev'
  ext4: Fix reusing stale buffer heads from last failed mounting
  ext4: allow concurrent unaligned dio overwrites
  ext4: clean up mballoc criteria comments
  ext4: make ext4_zeroout_es() return void
  ext4: make ext4_es_insert_extent() return void
  ext4: make ext4_es_insert_delayed_block() return void
  ext4: make ext4_es_remove_extent() return void
  ...