linux-stable.git/fs/jbd2/commit.c, branch v5.19

fs: Change try_to_free_buffers() to take a folio

2022-05-10T03:12:34+00:00

All but two of the callers already have a folio; pass a folio into
try_to_free_buffers().  This removes the last user of cancel_dirty_page()
so remove that wrapper function too.

Signed-off-by: Matthew Wilcox (Oracle) 
Reviewed-by: Jeff Layton

jbd2: Convert release_buffer_page() to use a folio

2022-05-10T03:12:33+00:00

Saves a few calls to compound_head().

Signed-off-by: Matthew Wilcox (Oracle) 
Acked-by: Theodore Ts'o 
Reviewed-by: Jeff Layton

jbd2: fix a potential race while discarding reserved buffers after an abort

2022-04-21T18:21:30+00:00

we got issue as follows:
[   72.796117] EXT4-fs error (device sda): ext4_journal_check_start:83: comm fallocate: Detected aborted journal
[   72.826847] EXT4-fs (sda): Remounting filesystem read-only
fallocate: fallocate failed: Read-only file system
[   74.791830] jbd2_journal_commit_transaction: jh=0xffff9cfefe725d90 bh=0x0000000000000000 end delay
[   74.793597] ------------[ cut here ]------------
[   74.794203] kernel BUG at fs/jbd2/transaction.c:2063!
[   74.794886] invalid opcode: 0000 [#1] PREEMPT SMP PTI
[   74.795533] CPU: 4 PID: 2260 Comm: jbd2/sda-8 Not tainted 5.17.0-rc8-next-20220315-dirty #150
[   74.798327] RIP: 0010:__jbd2_journal_unfile_buffer+0x3e/0x60
[   74.801971] RSP: 0018:ffffa828c24a3cb8 EFLAGS: 00010202
[   74.802694] RAX: 0000000000000000 RBX: 0000000000000000 RCX: 0000000000000000
[   74.803601] RDX: 0000000000000001 RSI: ffff9cfefe725d90 RDI: ffff9cfefe725d90
[   74.804554] RBP: ffff9cfefe725d90 R08: 0000000000000000 R09: ffffa828c24a3b20
[   74.805471] R10: 0000000000000001 R11: 0000000000000001 R12: ffff9cfefe725d90
[   74.806385] R13: ffff9cfefe725d98 R14: 0000000000000000 R15: ffff9cfe833a4d00
[   74.807301] FS:  0000000000000000(0000) GS:ffff9d01afb00000(0000) knlGS:0000000000000000
[   74.808338] CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[   74.809084] CR2: 00007f2b81bf4000 CR3: 0000000100056000 CR4: 00000000000006e0
[   74.810047] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
[   74.810981] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400
[   74.811897] Call Trace:
[   74.812241]  
[   74.812566]  __jbd2_journal_refile_buffer+0x12f/0x180
[   74.813246]  jbd2_journal_refile_buffer+0x4c/0xa0
[   74.813869]  jbd2_journal_commit_transaction.cold+0xa1/0x148
[   74.817550]  kjournald2+0xf8/0x3e0
[   74.819056]  kthread+0x153/0x1c0
[   74.819963]  ret_from_fork+0x22/0x30

Above issue may happen as follows:
        write                   truncate                   kjournald2
generic_perform_write
 ext4_write_begin
  ext4_walk_page_buffers
   do_journal_get_write_access ->add BJ_Reserved list
 ext4_journalled_write_end
  ext4_walk_page_buffers
   write_end_fn
    ext4_handle_dirty_metadata
                ***************JBD2 ABORT**************
     jbd2_journal_dirty_metadata
 -> return -EROFS, jh in reserved_list
                                                   jbd2_journal_commit_transaction
                                                    while (commit_transaction->t_reserved_list)
                                                      jh = commit_transaction->t_reserved_list;
                        truncate_pagecache_range
                         do_invalidatepage
			  ext4_journalled_invalidatepage
			   jbd2_journal_invalidatepage
			    journal_unmap_buffer
			     __dispose_buffer
			      __jbd2_journal_unfile_buffer
			       jbd2_journal_put_journal_head ->put last ref_count
			        __journal_remove_journal_head
				 bh->b_private = NULL;
				 jh->b_bh = NULL;
				                      jbd2_journal_refile_buffer(journal, jh);
							bh = jh2bh(jh);
							->bh is NULL, later will trigger null-ptr-deref
				 journal_free_journal_head(jh);

After commit 96f1e0974575, we no longer hold the j_state_lock while
iterating over the list of reserved handles in
jbd2_journal_commit_transaction().  This potentially allows the
journal_head to be freed by journal_unmap_buffer while the commit
codepath is also trying to free the BJ_Reserved buffers.  Keeping
j_state_lock held while trying extends hold time of the lock
minimally, and solves this issue.

Fixes: 96f1e0974575("jbd2: avoid long hold times of j_state_lock while committing a transaction")
Signed-off-by: Ye Bin 
Reviewed-by: Jan Kara 
Link: https://lore.kernel.org/r/20220317142137.1821590-1-yebin10@huawei.com
Signed-off-by: Theodore Ts'o

jbd2: refactor wait logic for transaction updates into a common function

2022-02-03T15:57:44+00:00

No functionality change as such in this patch. This only refactors the
common piece of code which waits for t_updates to finish into a common
function named as jbd2_journal_wait_updates(journal_t *)

Signed-off-by: Ritesh Harjani 
Reviewed-by: Jan Kara 
Link: https://lore.kernel.org/r/8c564f70f4b2591171677a2a74fccb22a7b6c3a4.1642416995.git.riteshh@linux.ibm.com
Signed-off-by: Theodore Ts'o

ext4: fast commit may not fallback for ineligible commit

2022-02-03T15:56:39+00:00

For the follow scenario:
1. jbd start commit transaction n
2. task A get new handle for transaction n+1
3. task A do some ineligible actions and mark FC_INELIGIBLE
4. jbd complete transaction n and clean FC_INELIGIBLE
5. task A call fsync

In this case fast commit will not fallback to full commit and
transaction n+1 also not handled by jbd.

Make ext4_fc_mark_ineligible() also record transaction tid for
latest ineligible case, when call ext4_fc_cleanup() check
current transaction tid, if small than latest ineligible tid
do not clear the EXT4_MF_FC_INELIGIBLE.

Reported-by: kernel test robot 
Reported-by: Dan Carpenter 
Reported-by: Ritesh Harjani 
Suggested-by: Harshad Shirwadkar 
Signed-off-by: Xin Yin 
Link: https://lore.kernel.org/r/20220117093655.35160-2-yinxin.x@bytedance.com
Signed-off-by: Theodore Ts'o 
Cc: stable@kernel.org

block: use an on-stack bio in blkdev_issue_flush

2021-01-27T16:51:48+00:00

There is no point in allocating memory for a synchronous flush.

Signed-off-by: Christoph Hellwig 
Reviewed-by: Johannes Thumshirn 
Reviewed-by: Chaitanya Kulkarni 
Acked-by: Damien Le Moal 
Signed-off-by: Jens Axboe

jbd2: add todo for a fast commit performance optimization

2020-11-07T04:01:03+00:00

Fast commit performance can be optimized if commit thread doesn't wait
for ongoing fast commits to complete until the transaction enters
T_FLUSH state. Document this optimization.

Suggested-by: Jan Kara 
Signed-off-by: Harshad Shirwadkar 
Link: https://lore.kernel.org/r/20201106035911.1942128-11-harshadshirwadkar@gmail.com
Signed-off-by: Theodore Ts'o

jbd2: rename j_maxlen to j_total_len and add jbd2_journal_max_txn_bufs

2020-11-07T04:01:02+00:00

The on-disk superblock field sb->s_maxlen represents the total size of
the journal including the fast commit area and is no more the max
number of blocks available for a transaction. The maximum number of
blocks available to a transaction is reduced by the number of fast
commit blocks. So, this patch renames j_maxlen to j_total_len to
better represent its intent. Also, it adds a function to calculate max
number of bufs available for a transaction.

Suggested-by: Jan Kara 
Signed-off-by: Harshad Shirwadkar 
Link: https://lore.kernel.org/r/20201106035911.1942128-6-harshadshirwadkar@gmail.com
Signed-off-by: Theodore Ts'o

jbd2: add fast commit machinery

2020-10-22T03:22:37+00:00

This functions adds necessary APIs needed in JBD2 layer for fast
commits.

Signed-off-by: Harshad Shirwadkar 
Link: https://lore.kernel.org/r/20201015203802.3597742-5-harshadshirwadkar@gmail.com
Signed-off-by: Theodore Ts'o

jbd2, ext4, ocfs2: introduce/use journal callbacks j_submit|finish_inode_data_buffers()

2020-10-18T14:37:15+00:00

Introduce journal callbacks to allow different behaviors
for an inode in journal_submit|finish_inode_data_buffers().

The existing users of the current behavior (ext4, ocfs2)
are adapted to use the previously exported functions
that implement the current behavior.

Users are callers of jbd2_journal_inode_ranged_write|wait(),
which adds the inode to the transaction's inode list with
the JI_WRITE|WAIT_DATA flags. Only ext4 and ocfs2 in-tree.

Both CONFIG_EXT4_FS and CONFIG_OCSFS2_FS select CONFIG_JBD2,
which builds fs/jbd2/commit.c and journal.c that define and
export the functions, so we can call directly in ext4/ocfs2.

Signed-off-by: Mauricio Faria de Oliveira 
Suggested-by: Jan Kara 
Reviewed-by: Jan Kara 
Reviewed-by: Andreas Dilger 
Link: https://lore.kernel.org/r/20201006004841.600488-3-mfo@canonical.com
Signed-off-by: Theodore Ts'o