linux-stable.git/fs/fuse, branch v6.1.78

fuse: share lookup state between submount and its parent

2024-01-01T12:39:08+00:00

commit c4d361f66ac91db8fc65061a9671682f61f4ca9d upstream.

Fuse submounts do not perform a lookup for the nodeid that they inherit
from their parent.  Instead, the code decrements the nlookup on the
submount's fuse_inode when it is instantiated, and no forget is
performed when a submount root is evicted.

Trouble arises when the submount's parent is evicted despite the
submount itself being in use.  In this author's case, the submount was
in a container and deatched from the initial mount namespace via a
MNT_DEATCH operation.  When memory pressure triggered the shrinker, the
inode from the parent was evicted, which triggered enough forgets to
render the submount's nodeid invalid.

Since submounts should still function, even if their parent goes away,
solve this problem by sharing refcounted state between the parent and
its submount.  When all of the references on this shared state reach
zero, it's safe to forget the final lookup of the fuse nodeid.

Signed-off-by: Krister Johansen 
Cc: stable@vger.kernel.org
Fixes: 1866d779d5d2 ("fuse: Allow fuse_fill_super_common() for submounts")
Signed-off-by: Miklos Szeredi 
Signed-off-by: Krister Johansen 
Signed-off-by: Greg Kroah-Hartman

fuse: dax: set fc->dax to NULL in fuse_dax_conn_free()

2023-12-20T16:00:20+00:00

commit 7f8ed28d1401320bcb02dda81b3c23ab2dc5a6d8 upstream.

fuse_dax_conn_free() will be called when fuse_fill_super_common() fails
after fuse_dax_conn_alloc(). Then deactivate_locked_super() in
virtio_fs_get_tree() will call virtio_kill_sb() to release the discarded
superblock. This will call fuse_dax_conn_free() again in fuse_conn_put(),
resulting in a possible double free.

Fixes: 1dd539577c42 ("virtiofs: add a mount option to enable dax")
Signed-off-by: Hangyu Hua 
Acked-by: Vivek Goyal 
Reviewed-by: Jingbo Xu 
Cc:  # v5.10
Signed-off-by: Miklos Szeredi 
Signed-off-by: Greg Kroah-Hartman

fuse: nlookup missing decrement in fuse_direntplus_link

2023-09-19T10:28:05+00:00

commit b8bd342d50cbf606666488488f9fea374aceb2d5 upstream.

During our debugging of glusterfs, we found an Assertion failed error:
inode_lookup >= nlookup, which was caused by the nlookup value in the
kernel being greater than that in the FUSE file system.

The issue was introduced by fuse_direntplus_link, where in the function,
fuse_iget increments nlookup, and if d_splice_alias returns failure,
fuse_direntplus_link returns failure without decrementing nlookup
https://github.com/gluster/glusterfs/pull/4081

Signed-off-by: ruanmeisi 
Fixes: 0b05b18381ee ("fuse: implement NFS-like readdirplus support")
Cc:  # v3.9
Signed-off-by: Miklos Szeredi 
Signed-off-by: Greg Kroah-Hartman

fuse: ioctl: translate ENOSYS in outarg

2023-07-27T06:50:25+00:00

commit 6a567e920fd0451bf29abc418df96c3365925770 upstream.

Fuse shouldn't return ENOSYS from its ioctl implementation. If userspace
responds with ENOSYS it should be translated to ENOTTY.

There are two ways to return an error from the IOCTL request:

 - fuse_out_header.error
 - fuse_ioctl_out.result

Commit 02c0cab8e734 ("fuse: ioctl: translate ENOSYS") already fixed this
issue for the first case, but missed the second case.  This patch fixes the
second case.

Reported-by: Jonathan Katz 
Closes: https://lore.kernel.org/all/CALKgVmcC1VUV_gJVq70n--omMJZUb4HSh_FqvLTHgNBc+HCLFQ@mail.gmail.com/
Fixes: 02c0cab8e734 ("fuse: ioctl: translate ENOSYS")
Cc: 
Signed-off-by: Miklos Szeredi 
Signed-off-by: Greg Kroah-Hartman

fuse: Apply flags2 only when userspace set the FUSE_INIT_EXT

2023-07-27T06:50:25+00:00

commit 3066ff93476c35679cb07a97cce37d9bb07632ff upstream.

This is just a safety precaution to avoid checking flags on memory that was
initialized on the user space side.  libfuse zeroes struct fuse_init_out
outarg, but this is not guranteed to be done in all implementations.
Better is to act on flags and to only apply flags2 when FUSE_INIT_EXT is
set.

There is a risk with this change, though - it might break existing user
space libraries, which are already using flags2 without setting
FUSE_INIT_EXT.

The corresponding libfuse patch is here
https://github.com/libfuse/libfuse/pull/662

Signed-off-by: Bernd Schubert 
Fixes: 53db28933e95 ("fuse: extend init flags")
Cc:  # v5.17
Signed-off-by: Miklos Szeredi 
Signed-off-by: Greg Kroah-Hartman

fuse: revalidate: don't invalidate if interrupted

2023-07-27T06:50:25+00:00

commit a9d1c4c6df0e568207907c04aed9e7beb1294c42 upstream.

If the LOOKUP request triggered from fuse_dentry_revalidate() is
interrupted, then the dentry will be invalidated, possibly resulting in
submounts being unmounted.

Reported-by: Xu Rongbo 
Closes: https://lore.kernel.org/all/CAJfpegswN_CJJ6C3RZiaK6rpFmNyWmXfaEpnQUJ42KCwNF5tWw@mail.gmail.com/
Fixes: 9e6268db496a ("[PATCH] FUSE - read-write operations")
Cc: 
Signed-off-by: Miklos Szeredi 
Signed-off-by: Greg Kroah-Hartman

fuse: always revalidate rename target dentry

2023-04-26T12:28:42+00:00

commit ccc031e26afe60d2a5a3d93dabd9c978210825fb upstream.

The previous commit df8629af2934 ("fuse: always revalidate if exclusive
create") ensures that the dentries are revalidated on O_EXCL creates.  This
commit complements it by also performing revalidation for rename target
dentries.  Otherwise, a rename target file that only exists in kernel
dentry cache but not in the filesystem will result in EEXIST if
RENAME_NOREPLACE flag is used.

Signed-off-by: Jiachen Zhang 
Signed-off-by: Zhang Tianci 
Signed-off-by: Miklos Szeredi 
Signed-off-by: Yang Bo 
Signed-off-by: Greg Kroah-Hartman

fuse: add inode/permission checks to fileattr_get/fileattr_set

2023-03-10T08:34:24+00:00

commit 1cc4606d19e3710bfab3f6704b87ff9580493c69 upstream.

It looks like these checks were accidentally lost during the conversion to
fileattr API.

Fixes: 72227eac177d ("fuse: convert to fileattr")
Cc:  # v5.13
Signed-off-by: Alexander Mikhalitsyn 
Signed-off-by: Miklos Szeredi 
Signed-off-by: Greg Kroah-Hartman

attr: use consistent sgid stripping checks

2023-03-03T10:52:25+00:00

commit ed5a7047d2011cb6b2bf84ceb6680124cc6a7d95 upstream.

Currently setgid stripping in file_remove_privs()'s should_remove_suid()
helper is inconsistent with other parts of the vfs. Specifically, it only
raises ATTR_KILL_SGID if the inode is S_ISGID and S_IXGRP but not if the
inode isn't in the caller's groups and the caller isn't privileged over the
inode although we require this already in setattr_prepare() and
setattr_copy() and so all filesystem implement this requirement implicitly
because they have to use setattr_{prepare,copy}() anyway.

But the inconsistency shows up in setgid stripping bugs for overlayfs in
xfstests (e.g., generic/673, generic/683, generic/685, generic/686,
generic/687). For example, we test whether suid and setgid stripping works
correctly when performing various write-like operations as an unprivileged
user (fallocate, reflink, write, etc.):

echo "Test 1 - qa_user, non-exec file $verb"
setup_testfile
chmod a+rws $junk_file
commit_and_check "$qa_user" "$verb" 64k 64k

The test basically creates a file with 6666 permissions. While the file has
the S_ISUID and S_ISGID bits set it does not have the S_IXGRP set. On a
regular filesystem like xfs what will happen is:

sys_fallocate()
-> vfs_fallocate()
   -> xfs_file_fallocate()
      -> file_modified()
         -> __file_remove_privs()
            -> dentry_needs_remove_privs()
               -> should_remove_suid()
            -> __remove_privs()
               newattrs.ia_valid = ATTR_FORCE | kill;
               -> notify_change()
                  -> setattr_copy()

In should_remove_suid() we can see that ATTR_KILL_SUID is raised
unconditionally because the file in the test has S_ISUID set.

But we also see that ATTR_KILL_SGID won't be set because while the file
is S_ISGID it is not S_IXGRP (see above) which is a condition for
ATTR_KILL_SGID being raised.

So by the time we call notify_change() we have attr->ia_valid set to
ATTR_KILL_SUID | ATTR_FORCE. Now notify_change() sees that
ATTR_KILL_SUID is set and does:

ia_valid = attr->ia_valid |= ATTR_MODE
attr->ia_mode = (inode->i_mode & ~S_ISUID);

which means that when we call setattr_copy() later we will definitely
update inode->i_mode. Note that attr->ia_mode still contains S_ISGID.

Now we call into the filesystem's ->setattr() inode operation which will
end up calling setattr_copy(). Since ATTR_MODE is set we will hit:

if (ia_valid & ATTR_MODE) {
        umode_t mode = attr->ia_mode;
        vfsgid_t vfsgid = i_gid_into_vfsgid(mnt_userns, inode);
        if (!vfsgid_in_group_p(vfsgid) &&
            !capable_wrt_inode_uidgid(mnt_userns, inode, CAP_FSETID))
                mode &= ~S_ISGID;
        inode->i_mode = mode;
}

and since the caller in the test is neither capable nor in the group of the
inode the S_ISGID bit is stripped.

But assume the file isn't suid then ATTR_KILL_SUID won't be raised which
has the consequence that neither the setgid nor the suid bits are stripped
even though it should be stripped because the inode isn't in the caller's
groups and the caller isn't privileged over the inode.

If overlayfs is in the mix things become a bit more complicated and the bug
shows up more clearly. When e.g., ovl_setattr() is hit from
ovl_fallocate()'s call to file_remove_privs() then ATTR_KILL_SUID and
ATTR_KILL_SGID might be raised but because the check in notify_change() is
questioning the ATTR_KILL_SGID flag again by requiring S_IXGRP for it to be
stripped the S_ISGID bit isn't removed even though it should be stripped:

sys_fallocate()
-> vfs_fallocate()
   -> ovl_fallocate()
      -> file_remove_privs()
         -> dentry_needs_remove_privs()
            -> should_remove_suid()
         -> __remove_privs()
            newattrs.ia_valid = ATTR_FORCE | kill;
            -> notify_change()
               -> ovl_setattr()
                  // TAKE ON MOUNTER'S CREDS
                  -> ovl_do_notify_change()
                     -> notify_change()
                  // GIVE UP MOUNTER'S CREDS
     // TAKE ON MOUNTER'S CREDS
     -> vfs_fallocate()
        -> xfs_file_fallocate()
           -> file_modified()
              -> __file_remove_privs()
                 -> dentry_needs_remove_privs()
                    -> should_remove_suid()
                 -> __remove_privs()
                    newattrs.ia_valid = attr_force | kill;
                    -> notify_change()

The fix for all of this is to make file_remove_privs()'s
should_remove_suid() helper to perform the same checks as we already
require in setattr_prepare() and setattr_copy() and have notify_change()
not pointlessly requiring S_IXGRP again. It doesn't make any sense in the
first place because the caller must calculate the flags via
should_remove_suid() anyway which would raise ATTR_KILL_SGID.

While we're at it we move should_remove_suid() from inode.c to attr.c
where it belongs with the rest of the iattr helpers. Especially since it
returns ATTR_KILL_S{G,U}ID flags. We also rename it to
setattr_should_drop_suidgid() to better reflect that it indicates both
setuid and setgid bit removal and also that it returns attr flags.

Running xfstests with this doesn't report any regressions. We should really
try and use consistent checks.

Reviewed-by: Amir Goldstein 
Signed-off-by: Christian Brauner (Microsoft) 
Signed-off-by: Amir Goldstein 
Signed-off-by: Greg Kroah-Hartman

use less confusing names for iov_iter direction initializers

2023-02-09T10:28:04+00:00

[ Upstream commit de4eda9de2d957ef2d6a8365a01e26a435e958cb ]

READ/WRITE proved to be actively confusing - the meanings are
"data destination, as used with read(2)" and "data source, as
used with write(2)", but people keep interpreting those as
"we read data from it" and "we write data to it", i.e. exactly
the wrong way.

Call them ITER_DEST and ITER_SOURCE - at least that is harder
to misinterpret...

Signed-off-by: Al Viro 
Stable-dep-of: 6dd88fd59da8 ("vhost-scsi: unbreak any layout for response")
Signed-off-by: Sasha Levin