linux-stable.git/fs/fuse, branch v5.14.2

Merge branch 'for-5.14/dax' into libnvdimm-fixes

2021-08-11T19:04:43+00:00

Pick up some small dax cleanups that make some of Ira's follow on work
easier.

fs/fuse: Remove unneeded kaddr parameter

2021-07-08T05:10:03+00:00

fuse_dax_mem_range_init() does not need the address or the pfn of the
memory requested in dax_direct_access().  It is only calling direct
access to get the number of pages.

Remove the unused variables and stop requesting the kaddr and pfn from
dax_direct_access().

Reviewed-by: Dan Williams 
Signed-off-by: Ira Weiny 
Reviewed-by: Vivek Goyal 
Link: https://lore.kernel.org/r/20210525172428.3634316-2-ira.weiny@intel.com
Signed-off-by: Dan Williams

Merge tag 'fuse-update-5.14' of git://git.kernel.org/pub/scm/linux/kernel/git/mszeredi/fuse

2021-07-06T18:17:41+00:00

Pull fuse updates from Miklos Szeredi:

 - Fixes for virtiofs submounts

 - Misc fixes and cleanups

* tag 'fuse-update-5.14' of git://git.kernel.org/pub/scm/linux/kernel/git/mszeredi/fuse:
  virtiofs: Fix spelling mistakes
  fuse: use DIV_ROUND_UP helper macro for calculations
  fuse: fix illegal access to inode with reused nodeid
  fuse: allow fallocate(FALLOC_FL_ZERO_RANGE)
  fuse: Make fuse_fill_super_submount() static
  fuse: Switch to fc_mount() for submounts
  fuse: Call vfs_get_tree() for submounts
  fuse: add dedicated filesystem context ops for submounts
  virtiofs: propagate sync() to file server
  fuse: reject internal errno
  fuse: check connected before queueing on fpq->io
  fuse: ignore PG_workingset after stealing
  fuse: Fix infinite loop in sget_fc()
  fuse: Fix crash if superblock of submount gets killed early
  fuse: Fix crash in fuse_dentry_automount() error path

Merge branch 'work.iov_iter' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs

2021-07-03T18:30:04+00:00

Pull iov_iter updates from Al Viro:
 "iov_iter cleanups and fixes.

  There are followups, but this is what had sat in -next this cycle. IMO
  the macro forest in there became much thinner and easier to follow..."

* 'work.iov_iter' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs: (37 commits)
  csum_and_copy_to_pipe_iter(): leave handling of csum_state to caller
  clean up copy_mc_pipe_to_iter()
  pipe_zero(): we don't need no stinkin' kmap_atomic()...
  iov_iter: clean csum_and_copy_...() primitives up a bit
  copy_page_from_iter(): don't need kmap_atomic() for kvec/bvec cases
  copy_page_to_iter(): don't bother with kmap_atomic() for bvec/kvec cases
  iterate_xarray(): only of the first iteration we might get offset != 0
  pull handling of ->iov_offset into iterate_{iovec,bvec,xarray}
  iov_iter: make iterator callbacks use base and len instead of iovec
  iov_iter: make the amount already copied available to iterator callbacks
  iov_iter: get rid of separate bvec and xarray callbacks
  iov_iter: teach iterate_{bvec,xarray}() about possible short copies
  iterate_bvec(): expand bvec.h macro forest, massage a bit
  iov_iter: unify iterate_iovec and iterate_kvec
  iov_iter: massage iterate_iovec and iterate_kvec to logics similar to iterate_bvec
  iterate_and_advance(): get rid of magic in case when n is 0
  csum_and_copy_to_iter(): massage into form closer to csum_and_copy_from_iter()
  iov_iter: replace iov_iter_copy_from_user_atomic() with iterator-advancing variant
  [xarray] iov_iter_npages(): just use DIV_ROUND_UP()
  iov_iter_npages(): don't bother with iterate_all_kinds()
  ...

mm: move page dirtying prototypes from mm.h

2021-06-29T17:53:48+00:00

These functions implement the address_space ->set_page_dirty operation and
should live in pagemap.h, not mm.h so that the rest of the kernel doesn't
get funny ideas about calling them directly.

Link: https://lkml.kernel.org/r/20210615162342.1669332-7-willy@infradead.org
Signed-off-by: Matthew Wilcox (Oracle) 
Reviewed-by: Christoph Hellwig 
Cc: Al Viro 
Cc: Dan Williams 
Cc: Greg Kroah-Hartman 
Cc: Jan Kara 
Signed-off-by: Andrew Morton 
Signed-off-by: Linus Torvalds

fs: remove noop_set_page_dirty()

2021-06-29T17:53:48+00:00

Use __set_page_dirty_no_writeback() instead.  This will set the dirty bit
on the page, which will be used to avoid calling set_page_dirty() in the
future.  It will have no effect on actually writing the page back, as the
pages are not on any LRU lists.

[akpm@linux-foundation.org: export __set_page_dirty_no_writeback() to modules]

Link: https://lkml.kernel.org/r/20210615162342.1669332-6-willy@infradead.org
Signed-off-by: Matthew Wilcox (Oracle) 
Cc: Al Viro 
Cc: Christoph Hellwig 
Cc: Dan Williams 
Cc: Greg Kroah-Hartman 
Cc: Jan Kara 
Signed-off-by: Andrew Morton 
Signed-off-by: Linus Torvalds

virtiofs: Fix spelling mistakes

2021-06-22T07:15:36+00:00

Fix some spelling mistakes in comments:
refernce  ==> reference
happnes  ==> happens
threhold  ==> threshold
splitted  ==> split
mached  ==> matched

Signed-off-by: Zheng Yongjun 
Signed-off-by: Miklos Szeredi

fuse: use DIV_ROUND_UP helper macro for calculations

2021-06-22T07:15:36+00:00

Replace open coded divisor calculations with the DIV_ROUND_UP kernel macro
for better readability.

Signed-off-by: Wu Bo 
Signed-off-by: Miklos Szeredi

fuse: fix illegal access to inode with reused nodeid

2021-06-22T07:15:36+00:00

Server responds to LOOKUP and other ops (READDIRPLUS/CREATE/MKNOD/...)
with ourarg containing nodeid and generation.

If a fuse inode is found in inode cache with the same nodeid but different
generation, the existing fuse inode should be unhashed and marked "bad" and
a new inode with the new generation should be hashed instead.

This can happen, for example, with passhrough fuse filesystem that returns
the real filesystem ino/generation on lookup and where real inode numbers
can get recycled due to real files being unlinked not via the fuse
passthrough filesystem.

With current code, this situation will not be detected and an old fuse
dentry that used to point to an older generation real inode, can be used to
access a completely new inode, which should be accessed only via the new
dentry.

Note that because the FORGET message carries the nodeid w/o generation, the
server should wait to get FORGET counts for the nlookup counts of the old
and reused inodes combined, before it can free the resources associated to
that nodeid.

Signed-off-by: Amir Goldstein 
Signed-off-by: Miklos Szeredi

fuse: allow fallocate(FALLOC_FL_ZERO_RANGE)

2021-06-22T07:15:36+00:00

The current fuse module filters out fallocate(FALLOC_FL_ZERO_RANGE)
returning -EOPNOTSUPP.  libnbd's nbdfuse would like to translate
FALLOC_FL_ZERO_RANGE requests into the NBD command
NBD_CMD_WRITE_ZEROES which allows NBD servers that support it to do
zeroing efficiently.

This commit treats this flag exactly like FALLOC_FL_PUNCH_HOLE.

A way to test this, requiring fuse >= 3, nbdkit >= 1.8 and the latest
nbdfuse from https://gitlab.com/nbdkit/libnbd/-/tree/master/fuse is to
create a file containing some data and "mirror" it to a fuse file:

  $ dd if=/dev/urandom of=disk.img bs=1M count=1
  $ nbdkit file disk.img
  $ touch mirror.img
  $ nbdfuse mirror.img nbd://localhost &

(mirror.img -> nbdfuse -> NBD over loopback -> nbdkit -> disk.img)

You can then run commands such as:

  $ fallocate -z -o 1024 -l 1024 mirror.img

and check that the content of the original file ("disk.img") stays
synchronized.  To show NBD commands, export LIBNBD_DEBUG=1 before
running nbdfuse.  To clean up:

  $ fusermount3 -u mirror.img
  $ killall nbdkit

Signed-off-by: Richard W.M. Jones 
Signed-off-by: Miklos Szeredi