linux-stable.git/fs/fuse, branch v5.12

fuse: 32-bit user space ioctl compat for fuse device

2021-03-16T14:20:16+00:00

With a 64-bit kernel build the FUSE device cannot handle ioctl requests
coming from 32-bit user space.  This is due to the ioctl command
translation that generates different command identifiers that thus cannot
be used for direct comparisons without proper manipulation.

Explicitly extract type and number from the ioctl command to enable 32-bit
user space compatibility on 64-bit kernel builds.

Signed-off-by: Alessio Balsini 
Signed-off-by: Miklos Szeredi

virtiofs: Fail dax mount if device does not support it

2021-03-05T14:46:47+00:00

Right now "mount -t virtiofs -o dax myfs /mnt/virtiofs" succeeds even
if filesystem deivce does not have a cache window and hence DAX can't
be supported.

This gives a false sense to user that they are using DAX with virtiofs
but fact of the matter is that they are not.

Fix this by returning error if dax can't be supported and user has asked
for it.

Signed-off-by: Vivek Goyal 
Reviewed-by: Stefan Hajnoczi 
Signed-off-by: Miklos Szeredi

fuse: fix live lock in fuse_iget()

2021-03-04T12:36:46+00:00

Commit 5d069dbe8aaf ("fuse: fix bad inode") replaced make_bad_inode()
in fuse_iget() with a private implementation fuse_make_bad().

The private implementation fails to remove the bad inode from inode
cache, so the retry loop with iget5_locked() finds the same bad inode
and marks it bad forever.

kmsg snip:

[ ] rcu: INFO: rcu_sched self-detected stall on CPU
...
[ ]  ? bit_wait_io+0x50/0x50
[ ]  ? fuse_init_file_inode+0x70/0x70
[ ]  ? find_inode.isra.32+0x60/0xb0
[ ]  ? fuse_init_file_inode+0x70/0x70
[ ]  ilookup5_nowait+0x65/0x90
[ ]  ? fuse_init_file_inode+0x70/0x70
[ ]  ilookup5.part.36+0x2e/0x80
[ ]  ? fuse_init_file_inode+0x70/0x70
[ ]  ? fuse_inode_eq+0x20/0x20
[ ]  iget5_locked+0x21/0x80
[ ]  ? fuse_inode_eq+0x20/0x20
[ ]  fuse_iget+0x96/0x1b0

Fixes: 5d069dbe8aaf ("fuse: fix bad inode")
Cc: stable@vger.kernel.org # 5.10+
Signed-off-by: Amir Goldstein 
Signed-off-by: Miklos Szeredi

mm/filemap: remove unused parameter and change to void type for replace_page_cache_page()

2021-02-24T21:38:27+00:00

Since commit 74d609585d8b ("page cache: Add and replace pages using the
XArray") was merged, the replace_page_cache_page() can not fail and always
return 0, we can remove the redundant return value and void it.  Moreover
remove the unused gfp_mask.

Link: https://lkml.kernel.org/r/609c30e5274ba15d8b90c872fd0d8ac437a9b2bb.1610071401.git.baolin.wang@linux.alibaba.com
Signed-off-by: Baolin Wang 
Cc: Matthew Wilcox 
Cc: Miklos Szeredi 
Signed-off-by: Andrew Morton 
Signed-off-by: Linus Torvalds

fs: make helpers idmap mount aware

2021-01-24T13:27:20+00:00

Extend some inode methods with an additional user namespace argument. A
filesystem that is aware of idmapped mounts will receive the user
namespace the mount has been marked with. This can be used for
additional permission checking and also to enable filesystems to
translate between uids and gids if they need to. We have implemented all
relevant helpers in earlier patches.

As requested we simply extend the exisiting inode method instead of
introducing new ones. This is a little more code churn but it's mostly
mechanical and doesnt't leave us with additional inode methods.

Link: https://lore.kernel.org/r/20210121131959.646623-25-christian.brauner@ubuntu.com
Cc: Christoph Hellwig 
Cc: David Howells 
Cc: Al Viro 
Cc: linux-fsdevel@vger.kernel.org
Reviewed-by: Christoph Hellwig 
Signed-off-by: Christian Brauner

stat: handle idmapped mounts

2021-01-24T13:27:17+00:00

The generic_fillattr() helper fills in the basic attributes associated
with an inode. Enable it to handle idmapped mounts. If the inode is
accessed through an idmapped mount map it into the mount's user
namespace before we store the uid and gid. If the initial user namespace
is passed nothing changes so non-idmapped mounts will see identical
behavior as before.

Link: https://lore.kernel.org/r/20210121131959.646623-12-christian.brauner@ubuntu.com
Cc: Christoph Hellwig 
Cc: David Howells 
Cc: Al Viro 
Cc: linux-fsdevel@vger.kernel.org
Reviewed-by: Christoph Hellwig 
Reviewed-by: James Morris 
Signed-off-by: Christian Brauner

acl: handle idmapped mounts

2021-01-24T13:27:17+00:00

The posix acl permission checking helpers determine whether a caller is
privileged over an inode according to the acls associated with the
inode. Add helpers that make it possible to handle acls on idmapped
mounts.

The vfs and the filesystems targeted by this first iteration make use of
posix_acl_fix_xattr_from_user() and posix_acl_fix_xattr_to_user() to
translate basic posix access and default permissions such as the
ACL_USER and ACL_GROUP type according to the initial user namespace (or
the superblock's user namespace) to and from the caller's current user
namespace. Adapt these two helpers to handle idmapped mounts whereby we
either map from or into the mount's user namespace depending on in which
direction we're translating.
Similarly, cap_convert_nscap() is used by the vfs to translate user
namespace and non-user namespace aware filesystem capabilities from the
superblock's user namespace to the caller's user namespace. Enable it to
handle idmapped mounts by accounting for the mount's user namespace.

In addition the fileystems targeted in the first iteration of this patch
series make use of the posix_acl_chmod() and, posix_acl_update_mode()
helpers. Both helpers perform permission checks on the target inode. Let
them handle idmapped mounts. These two helpers are called when posix
acls are set by the respective filesystems to handle this case we extend
the ->set() method to take an additional user namespace argument to pass
the mount's user namespace down.

Link: https://lore.kernel.org/r/20210121131959.646623-9-christian.brauner@ubuntu.com
Cc: Christoph Hellwig 
Cc: David Howells 
Cc: Al Viro 
Cc: linux-fsdevel@vger.kernel.org
Reviewed-by: Christoph Hellwig 
Signed-off-by: Christian Brauner

attr: handle idmapped mounts

2021-01-24T13:27:16+00:00

When file attributes are changed most filesystems rely on the
setattr_prepare(), setattr_copy(), and notify_change() helpers for
initialization and permission checking. Let them handle idmapped mounts.
If the inode is accessed through an idmapped mount map it into the
mount's user namespace. Afterwards the checks are identical to
non-idmapped mounts. If the initial user namespace is passed nothing
changes so non-idmapped mounts will see identical behavior as before.

Helpers that perform checks on the ia_uid and ia_gid fields in struct
iattr assume that ia_uid and ia_gid are intended values and have already
been mapped correctly at the userspace-kernelspace boundary as we
already do today. If the initial user namespace is passed nothing
changes so non-idmapped mounts will see identical behavior as before.

Link: https://lore.kernel.org/r/20210121131959.646623-8-christian.brauner@ubuntu.com
Cc: Christoph Hellwig 
Cc: David Howells 
Cc: Al Viro 
Cc: linux-fsdevel@vger.kernel.org
Reviewed-by: Christoph Hellwig 
Signed-off-by: Christian Brauner

namei: make permission helpers idmapped mount aware

2021-01-24T13:27:16+00:00

The two helpers inode_permission() and generic_permission() are used by
the vfs to perform basic permission checking by verifying that the
caller is privileged over an inode. In order to handle idmapped mounts
we extend the two helpers with an additional user namespace argument.
On idmapped mounts the two helpers will make sure to map the inode
according to the mount's user namespace and then peform identical
permission checks to inode_permission() and generic_permission(). If the
initial user namespace is passed nothing changes so non-idmapped mounts
will see identical behavior as before.

Link: https://lore.kernel.org/r/20210121131959.646623-6-christian.brauner@ubuntu.com
Cc: Christoph Hellwig 
Cc: David Howells 
Cc: Al Viro 
Cc: linux-fsdevel@vger.kernel.org
Reviewed-by: Christoph Hellwig 
Reviewed-by: James Morris 
Acked-by: Serge Hallyn 
Signed-off-by: Christian Brauner

fuse: fix bad inode

2020-12-10T14:33:14+00:00

Jan Kara's analysis of the syzbot report (edited):

  The reproducer opens a directory on FUSE filesystem, it then attaches
  dnotify mark to the open directory.  After that a fuse_do_getattr() call
  finds that attributes returned by the server are inconsistent, and calls
  make_bad_inode() which, among other things does:

          inode->i_mode = S_IFREG;

  This then confuses dnotify which doesn't tear down its structures
  properly and eventually crashes.

Avoid calling make_bad_inode() on a live inode: switch to a private flag on
the fuse inode.  Also add the test to ops which the bad_inode_ops would
have caught.

This bug goes back to the initial merge of fuse in 2.6.14...

Reported-by: syzbot+f427adf9324b92652ccc@syzkaller.appspotmail.com
Signed-off-by: Miklos Szeredi 
Tested-by: Jan Kara 
Cc: