linux-stable.git/fs/fat, branch v5.18

Merge branch 'akpm' (patches from Andrew)

2022-03-24T21:14:07+00:00

Merge more updates from Andrew Morton:
 "Various misc subsystems, before getting into the post-linux-next
  material.

  41 patches.

  Subsystems affected by this patch series: procfs, misc, core-kernel,
  lib, checkpatch, init, pipe, minix, fat, cgroups, kexec, kdump,
  taskstats, panic, kcov, resource, and ubsan"

* emailed patches from Andrew Morton : (41 commits)
  Revert "ubsan, kcsan: Don't combine sanitizer with kcov on clang"
  kernel/resource: fix kfree() of bootmem memory again
  kcov: properly handle subsequent mmap calls
  kcov: split ioctl handling into locked and unlocked parts
  panic: move panic_print before kmsg dumpers
  panic: add option to dump all CPUs backtraces in panic_print
  docs: sysctl/kernel: add missing bit to panic_print
  taskstats: remove unneeded dead assignment
  kasan: no need to unset panic_on_warn in end_report()
  ubsan: no need to unset panic_on_warn in ubsan_epilogue()
  panic: unset panic_on_warn inside panic()
  docs: kdump: add scp example to write out the dump file
  docs: kdump: update description about sysfs file system support
  arm64: mm: use IS_ENABLED(CONFIG_KEXEC_CORE) instead of #ifdef
  x86/setup: use IS_ENABLED(CONFIG_KEXEC_CORE) instead of #ifdef
  riscv: mm: init: use IS_ENABLED(CONFIG_KEXEC_CORE) instead of #ifdef
  kexec: make crashk_res, crashk_low_res and crash_notes symbols always visible
  cgroup: use irqsave in cgroup_rstat_flush_locked().
  fat: use pointer to simple type in put_user()
  minix: fix bug when opening a file with O_DIRECT
  ...

fat: use pointer to simple type in put_user()

2022-03-24T02:00:34+00:00

The put_user(val,ptr) macro wants a pointer to a simple type, but in
fat_ioctl_filldir() the d_name field references an "array of chars".  Be
more accurate and explicitly give the pointer to the first character of
the d_name[] array.

I noticed that issue while trying to optimize the parisc put_user()
macro and used an intermediate variable to store the pointer.  In that
case I got this error:

  In file included from include/linux/uaccess.h:11,
                   from include/linux/compat.h:17,
                   from fs/fat/dir.c:18:
  fs/fat/dir.c: In function `fat_ioctl_filldir':
  fs/fat/dir.c:725:33: error: invalid initializer
    725 |                 if (put_user(0, d2->d_name)                     ||         \
        |                                 ^~
  include/asm/uaccess.h:152:33: note: in definition of macro `__put_user'
    152 |         __typeof__(ptr) __ptr = ptr;                            \
        |                                 ^~~
  fs/fat/dir.c:759:1: note: in expansion of macro `FAT_IOCTL_FILLDIR_FUNC'
    759 | FAT_IOCTL_FILLDIR_FUNC(fat_ioctl_filldir, __fat_dirent)

Andreas Schwab  suggested to use

   __typeof__(&*(ptr)) __ptr = ptr;

instead.  This works, but nevertheless it's probably reasonable to fix
the original caller too.

Link: https://lkml.kernel.org/r/Ygo+A9MREmC1H3kr@p100
Signed-off-by: Helge Deller 
Acked-by: OGAWA Hirofumi 
Cc: David Laight 
Cc: Andreas Schwab 
Signed-off-by: Andrew Morton 
Signed-off-by: Linus Torvalds

Merge tag 'folio-5.18b' of git://git.infradead.org/users/willy/pagecache

2022-03-23T01:26:56+00:00

Pull filesystem folio updates from Matthew Wilcox:
 "Primarily this series converts some of the address_space operations to
  take a folio instead of a page.

  Notably:

   - a_ops->is_partially_uptodate() takes a folio instead of a page and
     changes the type of the 'from' and 'count' arguments to make it
     obvious they're bytes.

   - a_ops->invalidatepage() becomes ->invalidate_folio() and has a
     similar type change.

   - a_ops->launder_page() becomes ->launder_folio()

   - a_ops->set_page_dirty() becomes ->dirty_folio() and adds the
     address_space as an argument.

  There are a couple of other misc changes up front that weren't worth
  separating into their own pull request"

* tag 'folio-5.18b' of git://git.infradead.org/users/willy/pagecache: (53 commits)
  fs: Remove aops ->set_page_dirty
  fb_defio: Use noop_dirty_folio()
  fs: Convert __set_page_dirty_no_writeback to noop_dirty_folio
  fs: Convert __set_page_dirty_buffers to block_dirty_folio
  nilfs: Convert nilfs_set_page_dirty() to nilfs_dirty_folio()
  mm: Convert swap_set_page_dirty() to swap_dirty_folio()
  ubifs: Convert ubifs_set_page_dirty to ubifs_dirty_folio
  f2fs: Convert f2fs_set_node_page_dirty to f2fs_dirty_node_folio
  f2fs: Convert f2fs_set_data_page_dirty to f2fs_dirty_data_folio
  f2fs: Convert f2fs_set_meta_page_dirty to f2fs_dirty_meta_folio
  afs: Convert afs_dir_set_page_dirty() to afs_dir_dirty_folio()
  btrfs: Convert extent_range_redirty_for_io() to use folios
  fs: Convert trivial uses of __set_page_dirty_nobuffers to filemap_dirty_folio
  btrfs: Convert from set_page_dirty to dirty_folio
  fscache: Convert fscache_set_page_dirty() to fscache_dirty_folio()
  fs: Add aops->dirty_folio
  fs: Remove aops->launder_page
  orangefs: Convert launder_page to launder_folio
  nfs: Convert from launder_page to launder_folio
  fuse: Convert from launder_page to launder_folio
  ...

fs: allocate inode by using alloc_inode_sb()

2022-03-22T22:57:03+00:00

The inode allocation is supposed to use alloc_inode_sb(), so convert
kmem_cache_alloc() of all filesystems to alloc_inode_sb().

Link: https://lkml.kernel.org/r/20220228122126.37293-5-songmuchun@bytedance.com
Signed-off-by: Muchun Song 
Acked-by: Theodore Ts'o 		[ext4]
Acked-by: Roman Gushchin 
Cc: Alex Shi 
Cc: Anna Schumaker 
Cc: Chao Yu 
Cc: Dave Chinner 
Cc: Fam Zheng 
Cc: Jaegeuk Kim 
Cc: Johannes Weiner 
Cc: Kari Argillander 
Cc: Matthew Wilcox (Oracle) 
Cc: Michal Hocko 
Cc: Qi Zheng 
Cc: Shakeel Butt 
Cc: Trond Myklebust 
Cc: Vladimir Davydov 
Cc: Vlastimil Babka 
Cc: Wei Yang 
Cc: Xiongchun Duan 
Cc: Yang Shi 
Signed-off-by: Andrew Morton 
Signed-off-by: Linus Torvalds

fs: Convert __set_page_dirty_buffers to block_dirty_folio

2022-03-16T17:37:04+00:00

Convert all callers; mostly this is just changing the aops to point
at it, but a few implementations need a little more work.

Signed-off-by: Matthew Wilcox (Oracle) 
Tested-by: Damien Le Moal 
Acked-by: Damien Le Moal 
Tested-by: Mike Marshall  # orangefs
Tested-by: David Howells  # afs

fs: Turn block_invalidatepage into block_invalidate_folio

2022-03-15T12:23:29+00:00

Remove special-casing of a NULL invalidatepage, since there is no
more block_invalidatepage.

Signed-off-by: Matthew Wilcox (Oracle) 
Tested-by: Damien Le Moal 
Acked-by: Damien Le Moal 
Tested-by: Mike Marshall  # orangefs
Tested-by: David Howells  # afs

FAT: use io_schedule_timeout() instead of congestion_wait()

2022-01-20T06:52:54+00:00

congestion_wait() in this context is just a sleep - block devices do not
support congestion signalling any more.

The goal for this wait, which was introduced in commit ae78bf9c4f5f
("[PATCH] add -o flush for fat") is to wait for any recently written
data to get to storage.  We currently have no direct mechanism to do
this, so a simple wait that behaves identically to the current
congestion_wait() is the best we can do.

This is a step towards removing congestion_wait()

Link: https://lkml.kernel.org/r/163936544519.22433.13400436295732112065@noble.neil.brown.name
Signed-off-by: NeilBrown 
Acked-by: OGAWA Hirofumi 
Signed-off-by: Andrew Morton 
Signed-off-by: Linus Torvalds

Merge tag 'for-5.16/inode-sync-2021-10-29' of git://git.kernel.dk/linux-block

2021-11-01T17:25:27+00:00

Pull block inode sync updates from Jens Axboe:
 "This contains improvements to how bdev inode syncing is handled,
  unifying the API"

* tag 'for-5.16/inode-sync-2021-10-29' of git://git.kernel.dk/linux-block:
  block: simplify the block device syncing code
  ntfs3: use sync_blockdev_nowait
  fat: use sync_blockdev_nowait
  btrfs: use sync_blockdev
  xen-blkback: use sync_blockdev
  block: remove __sync_blockdev
  fs: remove __sync_filesystem

fat: use sync_blockdev_nowait

2021-10-22T14:36:55+00:00

Use sync_blockdev_nowait instead of opencoding it.

Signed-off-by: Christoph Hellwig 
Reviewed-by: Chaitanya Kulkarni 
Link: https://lore.kernel.org/r/20211019062530.2174626-6-hch@lst.de
Signed-off-by: Jens Axboe

fat: use bdev_nr_sectors instead of open coding it

2021-10-18T20:43:22+00:00

Use the proper helper to read the block device size.

Signed-off-by: Christoph Hellwig 
Reviewed-by: Kees Cook 
Link: https://lore.kernel.org/r/20211018101130.1838532-15-hch@lst.de
Signed-off-by: Jens Axboe