linux-stable.git/fs/ext4, branch v5.4.178

ext4: fix error handling in ext4_restore_inline_data()

2022-02-08T17:24:34+00:00

commit 897026aaa73eb2517dfea8d147f20ddb0b813044 upstream.

While running "./check -I 200 generic/475" it sometimes gives below
kernel BUG(). Ideally we should not call ext4_write_inline_data() if
ext4_create_inline_data() has failed.


[73131.453234] kernel BUG at fs/ext4/inline.c:223!


 212 static void ext4_write_inline_data(struct inode *inode, struct ext4_iloc *iloc,
 213                                    void *buffer, loff_t pos, unsigned int len)
 214 {
<...>
 223         BUG_ON(!EXT4_I(inode)->i_inline_off);
 224         BUG_ON(pos + len > EXT4_I(inode)->i_inline_size);

This patch handles the error and prints out a emergency msg saying potential
data loss for the given inode (since we couldn't restore the original
inline_data due to some previous error).

[ 9571.070313] EXT4-fs (dm-0): error restoring inline_data for inode -- potential data loss! (inode 1703982, error -30)

Reported-by: Eric Whitney 
Signed-off-by: Ritesh Harjani 
Reviewed-by: Jan Kara 
Link: https://lore.kernel.org/r/9f4cd7dfd54fa58ff27270881823d94ddf78dd07.1642416995.git.riteshh@linux.ibm.com
Signed-off-by: Theodore Ts'o 
Cc: stable@kernel.org
Signed-off-by: Greg Kroah-Hartman



ext4: don't use the orphan list when migrating an inode
2022-01-27T08:19:51+00:00

commit 6eeaf88fd586f05aaf1d48cb3a139d2a5c6eb055 upstream.

We probably want to remove the indirect block to extents migration
feature after a deprecation window, but until then, let's fix a
potential data loss problem caused by the fact that we put the
tmp_inode on the orphan list.  In the unlikely case where we crash and
do a journal recovery, the data blocks belonging to the inode being
migrated are also represented in the tmp_inode on the orphan list ---
and so its data blocks will get marked unallocated, and available for
reuse.

Instead, stop putting the tmp_inode on the oprhan list.  So in the
case where we crash while migrating the inode, we'll leak an inode,
which is not a disaster.  It will be easily fixed the next time we run
fsck, and it's better than potentially having blocks getting claimed
by two different files, and losing data as a result.

Signed-off-by: Theodore Ts'o 
Reviewed-by: Lukas Czerner 
Cc: stable@kernel.org
Signed-off-by: Greg Kroah-Hartman 




ext4: Fix BUG_ON in ext4_bread when write quota data
2022-01-27T08:19:51+00:00

commit 380a0091cab482489e9b19e07f2a166ad2b76d5c upstream.

We got issue as follows when run syzkaller:
[  167.936972] EXT4-fs error (device loop0): __ext4_remount:6314: comm rep: Abort forced by user
[  167.938306] EXT4-fs (loop0): Remounting filesystem read-only
[  167.981637] Assertion failure in ext4_getblk() at fs/ext4/inode.c:847: '(EXT4_SB(inode->i_sb)->s_mount_state & EXT4_FC_REPLAY) || handle != NULL || create == 0'
[  167.983601] ------------[ cut here ]------------
[  167.984245] kernel BUG at fs/ext4/inode.c:847!
[  167.984882] invalid opcode: 0000 [#1] PREEMPT SMP KASAN PTI
[  167.985624] CPU: 7 PID: 2290 Comm: rep Tainted: G    B             5.16.0-rc5-next-20211217+ #123
[  167.986823] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS ?-20190727_073836-buildvm-ppc64le-16.ppc.fedoraproject.org-3.fc31 04/01/2014
[  167.988590] RIP: 0010:ext4_getblk+0x17e/0x504
[  167.989189] Code: c6 01 74 28 49 c7 c0 a0 a3 5c 9b b9 4f 03 00 00 48 c7 c2 80 9c 5c 9b 48 c7 c6 40 b6 5c 9b 48 c7 c7 20 a4 5c 9b e8 77 e3 fd ff <0f> 0b 8b 04 244
[  167.991679] RSP: 0018:ffff8881736f7398 EFLAGS: 00010282
[  167.992385] RAX: 0000000000000094 RBX: 1ffff1102e6dee75 RCX: 0000000000000000
[  167.993337] RDX: 0000000000000001 RSI: ffffffff9b6e29e0 RDI: ffffed102e6dee66
[  167.994292] RBP: ffff88816a076210 R08: 0000000000000094 R09: ffffed107363fa09
[  167.995252] R10: ffff88839b1fd047 R11: ffffed107363fa08 R12: ffff88816a0761e8
[  167.996205] R13: 0000000000000000 R14: 0000000000000021 R15: 0000000000000001
[  167.997158] FS:  00007f6a1428c740(0000) GS:ffff88839b000000(0000) knlGS:0000000000000000
[  167.998238] CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[  167.999025] CR2: 00007f6a140716c8 CR3: 0000000133216000 CR4: 00000000000006e0
[  167.999987] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
[  168.000944] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400
[  168.001899] Call Trace:
[  168.002235]  
[  168.007167]  ext4_bread+0xd/0x53
[  168.007612]  ext4_quota_write+0x20c/0x5c0
[  168.010457]  write_blk+0x100/0x220
[  168.010944]  remove_free_dqentry+0x1c6/0x440
[  168.011525]  free_dqentry.isra.0+0x565/0x830
[  168.012133]  remove_tree+0x318/0x6d0
[  168.014744]  remove_tree+0x1eb/0x6d0
[  168.017346]  remove_tree+0x1eb/0x6d0
[  168.019969]  remove_tree+0x1eb/0x6d0
[  168.022128]  qtree_release_dquot+0x291/0x340
[  168.023297]  v2_release_dquot+0xce/0x120
[  168.023847]  dquot_release+0x197/0x3e0
[  168.024358]  ext4_release_dquot+0x22a/0x2d0
[  168.024932]  dqput.part.0+0x1c9/0x900
[  168.025430]  __dquot_drop+0x120/0x190
[  168.025942]  ext4_clear_inode+0x86/0x220
[  168.026472]  ext4_evict_inode+0x9e8/0xa22
[  168.028200]  evict+0x29e/0x4f0
[  168.028625]  dispose_list+0x102/0x1f0
[  168.029148]  evict_inodes+0x2c1/0x3e0
[  168.030188]  generic_shutdown_super+0xa4/0x3b0
[  168.030817]  kill_block_super+0x95/0xd0
[  168.031360]  deactivate_locked_super+0x85/0xd0
[  168.031977]  cleanup_mnt+0x2bc/0x480
[  168.033062]  task_work_run+0xd1/0x170
[  168.033565]  do_exit+0xa4f/0x2b50
[  168.037155]  do_group_exit+0xef/0x2d0
[  168.037666]  __x64_sys_exit_group+0x3a/0x50
[  168.038237]  do_syscall_64+0x3b/0x90
[  168.038751]  entry_SYSCALL_64_after_hwframe+0x44/0xae

In order to reproduce this problem, the following conditions need to be met:
1. Ext4 filesystem with no journal;
2. Filesystem image with incorrect quota data;
3. Abort filesystem forced by user;
4. umount filesystem;

As in ext4_quota_write:
...
         if (EXT4_SB(sb)->s_journal && !handle) {
                 ext4_msg(sb, KERN_WARNING, "Quota write (off=%llu, len=%llu)"
                         " cancelled because transaction is not started",
                         (unsigned long long)off, (unsigned long long)len);
                 return -EIO;
         }
...
We only check handle if NULL when filesystem has journal. There is need
check handle if NULL even when filesystem has no journal.

Signed-off-by: Ye Bin 
Reviewed-by: Jan Kara 
Link: https://lore.kernel.org/r/20211223015506.297766-1-yebin10@huawei.com
Signed-off-by: Theodore Ts'o 
Cc: stable@kernel.org
Signed-off-by: Greg Kroah-Hartman 




ext4: set csum seed in tmp inode while migrating to extents
2022-01-27T08:19:51+00:00

commit e81c9302a6c3c008f5c30beb73b38adb0170ff2d upstream.

When migrating to extents, the temporary inode will have it's own checksum
seed.  This means that, when swapping the inodes data, the inode checksums
will be incorrect.

This can be fixed by recalculating the extents checksums again.  Or simply
by copying the seed into the temporary inode.

Link: https://bugzilla.kernel.org/show_bug.cgi?id=213357
Reported-by: Jeroen van Wolffelaar 
Signed-off-by: Luís Henriques 
Link: https://lore.kernel.org/r/20211214175058.19511-1-lhenriques@suse.de
Signed-off-by: Theodore Ts'o 
Cc: stable@kernel.org
Signed-off-by: Greg Kroah-Hartman 




ext4: make sure quota gets properly shutdown on error
2022-01-27T08:19:51+00:00

commit 15fc69bbbbbc8c72e5f6cc4e1be0f51283c5448e upstream.

When we hit an error when enabling quotas and setting inode flags, we do
not properly shutdown quota subsystem despite returning error from
Q_QUOTAON quotactl. This can lead to some odd situations like kernel
using quota file while it is still writeable for userspace. Make sure we
properly cleanup the quota subsystem in case of error.

Signed-off-by: Jan Kara 
Cc: stable@kernel.org
Link: https://lore.kernel.org/r/20211007155336.12493-2-jack@suse.cz
Signed-off-by: Theodore Ts'o 
Signed-off-by: Greg Kroah-Hartman 




ext4: make sure to reset inode lockdep class when quota enabling fails
2022-01-27T08:19:51+00:00

commit 4013d47a5307fdb5c13370b5392498b00fedd274 upstream.

When we succeed in enabling some quota type but fail to enable another
one with quota feature, we correctly disable all enabled quota types.
However we forget to reset i_data_sem lockdep class. When the inode gets
freed and reused, it will inherit this lockdep class (i_data_sem is
initialized only when a slab is created) and thus eventually lockdep
barfs about possible deadlocks.

Reported-and-tested-by: syzbot+3b6f9218b1301ddda3e2@syzkaller.appspotmail.com
Signed-off-by: Jan Kara 
Cc: stable@kernel.org
Link: https://lore.kernel.org/r/20211007155336.12493-3-jack@suse.cz
Signed-off-by: Theodore Ts'o 
Signed-off-by: Greg Kroah-Hartman 




ext4: avoid trim error on fs with small groups
2022-01-27T08:19:37+00:00

[ Upstream commit 173b6e383d2a204c9921ffc1eca3b87aa2106c33 ]

A user reported FITRIM ioctl failing for him on ext4 on some devices
without apparent reason.  After some debugging we've found out that
these devices (being LVM volumes) report rather large discard
granularity of 42MB and the filesystem had 1k blocksize and thus group
size of 8MB. Because ext4 FITRIM implementation puts discard
granularity into minlen, ext4_trim_fs() declared the trim request as
invalid. However just silently doing nothing seems to be a more
appropriate reaction to such combination of parameters since user did
not specify anything wrong.

CC: Lukas Czerner 
Fixes: 5c2ed62fd447 ("ext4: Adjust minlen with discard_granularity in the FITRIM ioctl")
Signed-off-by: Jan Kara 
Link: https://lore.kernel.org/r/20211112152202.26614-1-jack@suse.cz
Signed-off-by: Theodore Ts'o 
Signed-off-by: Sasha Levin 




ext4: fix lazy initialization next schedule time computation in more granular unit
2021-11-21T12:38:50+00:00

commit 39fec6889d15a658c3a3ebb06fd69d3584ddffd3 upstream.

Ext4 file system has default lazy inode table initialization setup once
it is mounted. However, it has issue on computing the next schedule time
that makes the timeout same amount in jiffies but different real time in
secs if with various HZ values. Therefore, fix by measuring the current
time in a more granular unit nanoseconds and make the next schedule time
independent of the HZ value.

Fixes: bfff68738f1c ("ext4: add support for lazy inode table initialization")
Signed-off-by: Shaoying Xu 
Cc: stable@vger.kernel.org
Signed-off-by: Theodore Ts'o 
Link: https://lore.kernel.org/r/20210902164412.9994-2-shaoyi@amazon.com
Signed-off-by: Theodore Ts'o 
Signed-off-by: Greg Kroah-Hartman 





ext4: correct the error path of ext4_write_inline_data_end()
2021-10-17T08:42:33+00:00

[ Upstream commit 55ce2f649b9e88111270333a8127e23f4f8f42d7 ]

Current error path of ext4_write_inline_data_end() is not correct.

Firstly, it should pass out the error value if ext4_get_inode_loc()
return fail, or else it could trigger infinite loop if we inject error
here. And then it's better to add inode to orphan list if it return fail
in ext4_journal_stop(), otherwise we could not restore inline xattr
entry after power failure. Finally, we need to reset the 'ret' value if
ext4_write_inline_data_end() return success in ext4_write_end() and
ext4_journalled_write_end(), otherwise we could not get the error return
value of ext4_journal_stop().

Signed-off-by: Zhang Yi 
Reviewed-by: Jan Kara 
Signed-off-by: Theodore Ts'o 
Link: https://lore.kernel.org/r/20210716122024.1105856-3-yi.zhang@huawei.com
Signed-off-by: Sasha Levin 




ext4: fix potential infinite loop in ext4_dx_readdir()
2021-10-06T13:42:37+00:00

commit 42cb447410d024e9d54139ae9c21ea132a8c384c upstream.

When ext4_htree_fill_tree() fails, ext4_dx_readdir() can run into an
infinite loop since if info->last_pos != ctx->pos this will reset the
directory scan and reread the failing entry.  For example:

1. a dx_dir which has 3 block, block 0 as dx_root block, block 1/2 as
   leaf block which own the ext4_dir_entry_2
2. block 1 read ok and call_filldir which will fill the dirent and update
   the ctx->pos
3. block 2 read fail, but we has already fill some dirent, so we will
   return back to userspace will a positive return val(see ksys_getdents64)
4. the second ext4_dx_readdir will reset the world since info->last_pos
   != ctx->pos, and will also init the curr_hash which pos to block 1
5. So we will read block1 too, and once block2 still read fail, we can
   only fill one dirent because the hash of the entry in block1(besides
   the last one) won't greater than curr_hash
6. this time, we forget update last_pos too since the read for block2
   will fail, and since we has got the one entry, ksys_getdents64 can
   return success
7. Latter we will trapped in a loop with step 4~6

Cc: stable@kernel.org
Signed-off-by: yangerkun 
Reviewed-by: Jan Kara 
Signed-off-by: Theodore Ts'o 
Link: https://lore.kernel.org/r/20210914111415.3921954-1-yangerkun@huawei.com
Signed-off-by: Greg Kroah-Hartman