<feed xmlns='http://www.w3.org/2005/Atom'>
<title>linux-stable.git/fs/ext4, branch v5.0.6</title>
<subtitle>Linux kernel stable tree</subtitle>
<link rel='alternate' type='text/html' href='https://git.tavy.me/linux-stable.git/'/>
<entry>
<title>ext4: brelse all indirect buffer in ext4_ind_remove_space()</title>
<updated>2019-03-27T05:17:56+00:00</updated>
<author>
<name>zhangyi (F)</name>
<email>yi.zhang@huawei.com</email>
</author>
<published>2019-03-23T15:43:05+00:00</published>
<link rel='alternate' type='text/html' href='https://git.tavy.me/linux-stable.git/commit/?id=c29313c07f2d956c4c6c34ce998beabeddc1f5ff'/>
<id>c29313c07f2d956c4c6c34ce998beabeddc1f5ff</id>
<content type='text'>
commit 674a2b27234d1b7afcb0a9162e81b2e53aeef217 upstream.

All indirect buffers get by ext4_find_shared() should be released no
mater the branch should be freed or not. But now, we forget to release
the lower depth indirect buffers when removing space from the same
higher depth indirect block. It will lead to buffer leak and futher
more, it may lead to quota information corruption when using old quota,
consider the following case.

 - Create and mount an empty ext4 filesystem without extent and quota
   features,
 - quotacheck and enable the user &amp; group quota,
 - Create some files and write some data to them, and then punch hole
   to some files of them, it may trigger the buffer leak problem
   mentioned above.
 - Disable quota and run quotacheck again, it will create two new
   aquota files and write the checked quota information to them, which
   probably may reuse the freed indirect block(the buffer and page
   cache was not freed) as data block.
 - Enable quota again, it will invoke
   vfs_load_quota_inode()-&gt;invalidate_bdev() to try to clean unused
   buffers and pagecache. Unfortunately, because of the buffer of quota
   data block is still referenced, quota code cannot read the up to date
   quota info from the device and lead to quota information corruption.

This problem can be reproduced by xfstests generic/231 on ext3 file
system or ext4 file system without extent and quota features.

This patch fix this problem by releasing the missing indirect buffers,
in ext4_ind_remove_space().

Reported-by: Hulk Robot &lt;hulkci@huawei.com&gt;
Signed-off-by: zhangyi (F) &lt;yi.zhang@huawei.com&gt;
Signed-off-by: Theodore Ts'o &lt;tytso@mit.edu&gt;
Reviewed-by: Jan Kara &lt;jack@suse.cz&gt;
Cc: stable@kernel.org
Signed-off-by: Greg Kroah-Hartman &lt;gregkh@linuxfoundation.org&gt;

</content>
<content type='xhtml'>
<div xmlns='http://www.w3.org/1999/xhtml'>
<pre>
commit 674a2b27234d1b7afcb0a9162e81b2e53aeef217 upstream.

All indirect buffers get by ext4_find_shared() should be released no
mater the branch should be freed or not. But now, we forget to release
the lower depth indirect buffers when removing space from the same
higher depth indirect block. It will lead to buffer leak and futher
more, it may lead to quota information corruption when using old quota,
consider the following case.

 - Create and mount an empty ext4 filesystem without extent and quota
   features,
 - quotacheck and enable the user &amp; group quota,
 - Create some files and write some data to them, and then punch hole
   to some files of them, it may trigger the buffer leak problem
   mentioned above.
 - Disable quota and run quotacheck again, it will create two new
   aquota files and write the checked quota information to them, which
   probably may reuse the freed indirect block(the buffer and page
   cache was not freed) as data block.
 - Enable quota again, it will invoke
   vfs_load_quota_inode()-&gt;invalidate_bdev() to try to clean unused
   buffers and pagecache. Unfortunately, because of the buffer of quota
   data block is still referenced, quota code cannot read the up to date
   quota info from the device and lead to quota information corruption.

This problem can be reproduced by xfstests generic/231 on ext3 file
system or ext4 file system without extent and quota features.

This patch fix this problem by releasing the missing indirect buffers,
in ext4_ind_remove_space().

Reported-by: Hulk Robot &lt;hulkci@huawei.com&gt;
Signed-off-by: zhangyi (F) &lt;yi.zhang@huawei.com&gt;
Signed-off-by: Theodore Ts'o &lt;tytso@mit.edu&gt;
Reviewed-by: Jan Kara &lt;jack@suse.cz&gt;
Cc: stable@kernel.org
Signed-off-by: Greg Kroah-Hartman &lt;gregkh@linuxfoundation.org&gt;

</pre>
</div>
</content>
</entry>
<entry>
<title>ext4: fix data corruption caused by unaligned direct AIO</title>
<updated>2019-03-27T05:17:56+00:00</updated>
<author>
<name>Lukas Czerner</name>
<email>lczerner@redhat.com</email>
</author>
<published>2019-03-15T03:20:25+00:00</published>
<link rel='alternate' type='text/html' href='https://git.tavy.me/linux-stable.git/commit/?id=f1902fd02d56a912b56a5eaa43d51221d8d3224b'/>
<id>f1902fd02d56a912b56a5eaa43d51221d8d3224b</id>
<content type='text'>
commit 372a03e01853f860560eade508794dd274e9b390 upstream.

Ext4 needs to serialize unaligned direct AIO because the zeroing of
partial blocks of two competing unaligned AIOs can result in data
corruption.

However it decides not to serialize if the potentially unaligned aio is
past i_size with the rationale that no pending writes are possible past
i_size. Unfortunately if the i_size is not block aligned and the second
unaligned write lands past i_size, but still into the same block, it has
the potential of corrupting the previous unaligned write to the same
block.

This is (very simplified) reproducer from Frank

    // 41472 = (10 * 4096) + 512
    // 37376 = 41472 - 4096

    ftruncate(fd, 41472);
    io_prep_pwrite(iocbs[0], fd, buf[0], 4096, 37376);
    io_prep_pwrite(iocbs[1], fd, buf[1], 4096, 41472);

    io_submit(io_ctx, 1, &amp;iocbs[1]);
    io_submit(io_ctx, 1, &amp;iocbs[2]);

    io_getevents(io_ctx, 2, 2, events, NULL);

Without this patch the 512B range from 40960 up to the start of the
second unaligned write (41472) is going to be zeroed overwriting the data
written by the first write. This is a data corruption.

00000000  00 00 00 00 00 00 00 00  00 00 00 00 00 00 00 00
*
00009200  30 30 30 30 30 30 30 30  30 30 30 30 30 30 30 30
*
0000a000  00 00 00 00 00 00 00 00  00 00 00 00 00 00 00 00
*
0000a200  31 31 31 31 31 31 31 31  31 31 31 31 31 31 31 31

With this patch the data corruption is avoided because we will recognize
the unaligned_aio and wait for the unwritten extent conversion.

00000000  00 00 00 00 00 00 00 00  00 00 00 00 00 00 00 00
*
00009200  30 30 30 30 30 30 30 30  30 30 30 30 30 30 30 30
*
0000a200  31 31 31 31 31 31 31 31  31 31 31 31 31 31 31 31
*
0000b200

Reported-by: Frank Sorenson &lt;fsorenso@redhat.com&gt;
Signed-off-by: Lukas Czerner &lt;lczerner@redhat.com&gt;
Signed-off-by: Theodore Ts'o &lt;tytso@mit.edu&gt;
Fixes: e9e3bcecf44c ("ext4: serialize unaligned asynchronous DIO")
Cc: stable@vger.kernel.org
Signed-off-by: Greg Kroah-Hartman &lt;gregkh@linuxfoundation.org&gt;

</content>
<content type='xhtml'>
<div xmlns='http://www.w3.org/1999/xhtml'>
<pre>
commit 372a03e01853f860560eade508794dd274e9b390 upstream.

Ext4 needs to serialize unaligned direct AIO because the zeroing of
partial blocks of two competing unaligned AIOs can result in data
corruption.

However it decides not to serialize if the potentially unaligned aio is
past i_size with the rationale that no pending writes are possible past
i_size. Unfortunately if the i_size is not block aligned and the second
unaligned write lands past i_size, but still into the same block, it has
the potential of corrupting the previous unaligned write to the same
block.

This is (very simplified) reproducer from Frank

    // 41472 = (10 * 4096) + 512
    // 37376 = 41472 - 4096

    ftruncate(fd, 41472);
    io_prep_pwrite(iocbs[0], fd, buf[0], 4096, 37376);
    io_prep_pwrite(iocbs[1], fd, buf[1], 4096, 41472);

    io_submit(io_ctx, 1, &amp;iocbs[1]);
    io_submit(io_ctx, 1, &amp;iocbs[2]);

    io_getevents(io_ctx, 2, 2, events, NULL);

Without this patch the 512B range from 40960 up to the start of the
second unaligned write (41472) is going to be zeroed overwriting the data
written by the first write. This is a data corruption.

00000000  00 00 00 00 00 00 00 00  00 00 00 00 00 00 00 00
*
00009200  30 30 30 30 30 30 30 30  30 30 30 30 30 30 30 30
*
0000a000  00 00 00 00 00 00 00 00  00 00 00 00 00 00 00 00
*
0000a200  31 31 31 31 31 31 31 31  31 31 31 31 31 31 31 31

With this patch the data corruption is avoided because we will recognize
the unaligned_aio and wait for the unwritten extent conversion.

00000000  00 00 00 00 00 00 00 00  00 00 00 00 00 00 00 00
*
00009200  30 30 30 30 30 30 30 30  30 30 30 30 30 30 30 30
*
0000a200  31 31 31 31 31 31 31 31  31 31 31 31 31 31 31 31
*
0000b200

Reported-by: Frank Sorenson &lt;fsorenso@redhat.com&gt;
Signed-off-by: Lukas Czerner &lt;lczerner@redhat.com&gt;
Signed-off-by: Theodore Ts'o &lt;tytso@mit.edu&gt;
Fixes: e9e3bcecf44c ("ext4: serialize unaligned asynchronous DIO")
Cc: stable@vger.kernel.org
Signed-off-by: Greg Kroah-Hartman &lt;gregkh@linuxfoundation.org&gt;

</pre>
</div>
</content>
</entry>
<entry>
<title>ext4: fix NULL pointer dereference while journal is aborted</title>
<updated>2019-03-27T05:17:56+00:00</updated>
<author>
<name>Jiufei Xue</name>
<email>jiufei.xue@linux.alibaba.com</email>
</author>
<published>2019-03-15T03:19:22+00:00</published>
<link rel='alternate' type='text/html' href='https://git.tavy.me/linux-stable.git/commit/?id=635218fee409e6f02f220d12a86b3ef79a9c9170'/>
<id>635218fee409e6f02f220d12a86b3ef79a9c9170</id>
<content type='text'>
commit fa30dde38aa8628c73a6dded7cb0bba38c27b576 upstream.

We see the following NULL pointer dereference while running xfstests
generic/475:
BUG: unable to handle kernel NULL pointer dereference at 0000000000000008
PGD 8000000c84bad067 P4D 8000000c84bad067 PUD c84e62067 PMD 0
Oops: 0000 [#1] SMP PTI
CPU: 7 PID: 9886 Comm: fsstress Kdump: loaded Not tainted 5.0.0-rc8 #10
RIP: 0010:ext4_do_update_inode+0x4ec/0x760
...
Call Trace:
? jbd2_journal_get_write_access+0x42/0x50
? __ext4_journal_get_write_access+0x2c/0x70
? ext4_truncate+0x186/0x3f0
ext4_mark_iloc_dirty+0x61/0x80
ext4_mark_inode_dirty+0x62/0x1b0
ext4_truncate+0x186/0x3f0
? unmap_mapping_pages+0x56/0x100
ext4_setattr+0x817/0x8b0
notify_change+0x1df/0x430
do_truncate+0x5e/0x90
? generic_permission+0x12b/0x1a0

This is triggered because the NULL pointer handle-&gt;h_transaction was
dereferenced in function ext4_update_inode_fsync_trans().
I found that the h_transaction was set to NULL in jbd2__journal_restart
but failed to attached to a new transaction while the journal is aborted.

Fix this by checking the handle before updating the inode.

Fixes: b436b9bef84d ("ext4: Wait for proper transaction commit on fsync")
Signed-off-by: Jiufei Xue &lt;jiufei.xue@linux.alibaba.com&gt;
Signed-off-by: Theodore Ts'o &lt;tytso@mit.edu&gt;
Reviewed-by: Joseph Qi &lt;joseph.qi@linux.alibaba.com&gt;
Cc: stable@kernel.org
Signed-off-by: Greg Kroah-Hartman &lt;gregkh@linuxfoundation.org&gt;

</content>
<content type='xhtml'>
<div xmlns='http://www.w3.org/1999/xhtml'>
<pre>
commit fa30dde38aa8628c73a6dded7cb0bba38c27b576 upstream.

We see the following NULL pointer dereference while running xfstests
generic/475:
BUG: unable to handle kernel NULL pointer dereference at 0000000000000008
PGD 8000000c84bad067 P4D 8000000c84bad067 PUD c84e62067 PMD 0
Oops: 0000 [#1] SMP PTI
CPU: 7 PID: 9886 Comm: fsstress Kdump: loaded Not tainted 5.0.0-rc8 #10
RIP: 0010:ext4_do_update_inode+0x4ec/0x760
...
Call Trace:
? jbd2_journal_get_write_access+0x42/0x50
? __ext4_journal_get_write_access+0x2c/0x70
? ext4_truncate+0x186/0x3f0
ext4_mark_iloc_dirty+0x61/0x80
ext4_mark_inode_dirty+0x62/0x1b0
ext4_truncate+0x186/0x3f0
? unmap_mapping_pages+0x56/0x100
ext4_setattr+0x817/0x8b0
notify_change+0x1df/0x430
do_truncate+0x5e/0x90
? generic_permission+0x12b/0x1a0

This is triggered because the NULL pointer handle-&gt;h_transaction was
dereferenced in function ext4_update_inode_fsync_trans().
I found that the h_transaction was set to NULL in jbd2__journal_restart
but failed to attached to a new transaction while the journal is aborted.

Fix this by checking the handle before updating the inode.

Fixes: b436b9bef84d ("ext4: Wait for proper transaction commit on fsync")
Signed-off-by: Jiufei Xue &lt;jiufei.xue@linux.alibaba.com&gt;
Signed-off-by: Theodore Ts'o &lt;tytso@mit.edu&gt;
Reviewed-by: Joseph Qi &lt;joseph.qi@linux.alibaba.com&gt;
Cc: stable@kernel.org
Signed-off-by: Greg Kroah-Hartman &lt;gregkh@linuxfoundation.org&gt;

</pre>
</div>
</content>
</entry>
<entry>
<title>ext4: fix crash during online resizing</title>
<updated>2019-03-23T19:11:26+00:00</updated>
<author>
<name>Jan Kara</name>
<email>jack@suse.cz</email>
</author>
<published>2019-02-11T18:30:32+00:00</published>
<link rel='alternate' type='text/html' href='https://git.tavy.me/linux-stable.git/commit/?id=db8913b46d74dc10fd4a9063b840e695f33e3eb9'/>
<id>db8913b46d74dc10fd4a9063b840e695f33e3eb9</id>
<content type='text'>
commit f96c3ac8dfc24b4e38fc4c2eba5fea2107b929d1 upstream.

When computing maximum size of filesystem possible with given number of
group descriptor blocks, we forget to include s_first_data_block into
the number of blocks. Thus for filesystems with non-zero
s_first_data_block it can happen that computed maximum filesystem size
is actually lower than current filesystem size which confuses the code
and eventually leads to a BUG_ON in ext4_alloc_group_tables() hitting on
flex_gd-&gt;count == 0. The problem can be reproduced like:

truncate -s 100g /tmp/image
mkfs.ext4 -b 1024 -E resize=262144 /tmp/image 32768
mount -t ext4 -o loop /tmp/image /mnt
resize2fs /dev/loop0 262145
resize2fs /dev/loop0 300000

Fix the problem by properly including s_first_data_block into the
computed number of filesystem blocks.

Fixes: 1c6bd7173d66 "ext4: convert file system to meta_bg if needed..."
Signed-off-by: Jan Kara &lt;jack@suse.cz&gt;
Signed-off-by: Theodore Ts'o &lt;tytso@mit.edu&gt;
Cc: stable@vger.kernel.org
Signed-off-by: Greg Kroah-Hartman &lt;gregkh@linuxfoundation.org&gt;

</content>
<content type='xhtml'>
<div xmlns='http://www.w3.org/1999/xhtml'>
<pre>
commit f96c3ac8dfc24b4e38fc4c2eba5fea2107b929d1 upstream.

When computing maximum size of filesystem possible with given number of
group descriptor blocks, we forget to include s_first_data_block into
the number of blocks. Thus for filesystems with non-zero
s_first_data_block it can happen that computed maximum filesystem size
is actually lower than current filesystem size which confuses the code
and eventually leads to a BUG_ON in ext4_alloc_group_tables() hitting on
flex_gd-&gt;count == 0. The problem can be reproduced like:

truncate -s 100g /tmp/image
mkfs.ext4 -b 1024 -E resize=262144 /tmp/image 32768
mount -t ext4 -o loop /tmp/image /mnt
resize2fs /dev/loop0 262145
resize2fs /dev/loop0 300000

Fix the problem by properly including s_first_data_block into the
computed number of filesystem blocks.

Fixes: 1c6bd7173d66 "ext4: convert file system to meta_bg if needed..."
Signed-off-by: Jan Kara &lt;jack@suse.cz&gt;
Signed-off-by: Theodore Ts'o &lt;tytso@mit.edu&gt;
Cc: stable@vger.kernel.org
Signed-off-by: Greg Kroah-Hartman &lt;gregkh@linuxfoundation.org&gt;

</pre>
</div>
</content>
</entry>
<entry>
<title>ext4: add mask of ext4 flags to swap</title>
<updated>2019-03-23T19:11:26+00:00</updated>
<author>
<name>yangerkun</name>
<email>yangerkun@huawei.com</email>
</author>
<published>2019-02-11T05:35:06+00:00</published>
<link rel='alternate' type='text/html' href='https://git.tavy.me/linux-stable.git/commit/?id=edc0bf6532ba167697ce6588d3311b6692bfb3d7'/>
<id>edc0bf6532ba167697ce6588d3311b6692bfb3d7</id>
<content type='text'>
commit abdc644e8cbac2e9b19763680e5a7cf9bab2bee7 upstream.

The reason is that while swapping two inode, we swap the flags too.
Some flags such as EXT4_JOURNAL_DATA_FL can really confuse the things
since we're not resetting the address operations structure.  The
simplest way to keep things sane is to restrict the flags that can be
swapped.

Signed-off-by: yangerkun &lt;yangerkun@huawei.com&gt;
Signed-off-by: Theodore Ts'o &lt;tytso@mit.edu&gt;
Cc: stable@vger.kernel.org
Signed-off-by: Greg Kroah-Hartman &lt;gregkh@linuxfoundation.org&gt;

</content>
<content type='xhtml'>
<div xmlns='http://www.w3.org/1999/xhtml'>
<pre>
commit abdc644e8cbac2e9b19763680e5a7cf9bab2bee7 upstream.

The reason is that while swapping two inode, we swap the flags too.
Some flags such as EXT4_JOURNAL_DATA_FL can really confuse the things
since we're not resetting the address operations structure.  The
simplest way to keep things sane is to restrict the flags that can be
swapped.

Signed-off-by: yangerkun &lt;yangerkun@huawei.com&gt;
Signed-off-by: Theodore Ts'o &lt;tytso@mit.edu&gt;
Cc: stable@vger.kernel.org
Signed-off-by: Greg Kroah-Hartman &lt;gregkh@linuxfoundation.org&gt;

</pre>
</div>
</content>
</entry>
<entry>
<title>ext4: update quota information while swapping boot loader inode</title>
<updated>2019-03-23T19:11:26+00:00</updated>
<author>
<name>yangerkun</name>
<email>yangerkun@huawei.com</email>
</author>
<published>2019-02-11T05:14:02+00:00</published>
<link rel='alternate' type='text/html' href='https://git.tavy.me/linux-stable.git/commit/?id=7c2cfdf99ae97e13bea5d0919a03a6b9bb2c02f2'/>
<id>7c2cfdf99ae97e13bea5d0919a03a6b9bb2c02f2</id>
<content type='text'>
commit aa507b5faf38784defe49f5e64605ac3c4425e26 upstream.

While do swap between two inode, they swap i_data without update
quota information. Also, swap_inode_boot_loader can do "revert"
somtimes, so update the quota while all operations has been finished.

Signed-off-by: yangerkun &lt;yangerkun@huawei.com&gt;
Signed-off-by: Theodore Ts'o &lt;tytso@mit.edu&gt;
Cc: stable@kernel.org
Signed-off-by: Greg Kroah-Hartman &lt;gregkh@linuxfoundation.org&gt;

</content>
<content type='xhtml'>
<div xmlns='http://www.w3.org/1999/xhtml'>
<pre>
commit aa507b5faf38784defe49f5e64605ac3c4425e26 upstream.

While do swap between two inode, they swap i_data without update
quota information. Also, swap_inode_boot_loader can do "revert"
somtimes, so update the quota while all operations has been finished.

Signed-off-by: yangerkun &lt;yangerkun@huawei.com&gt;
Signed-off-by: Theodore Ts'o &lt;tytso@mit.edu&gt;
Cc: stable@kernel.org
Signed-off-by: Greg Kroah-Hartman &lt;gregkh@linuxfoundation.org&gt;

</pre>
</div>
</content>
</entry>
<entry>
<title>ext4: cleanup pagecache before swap i_data</title>
<updated>2019-03-23T19:11:24+00:00</updated>
<author>
<name>yangerkun</name>
<email>yangerkun@huawei.com</email>
</author>
<published>2019-02-11T05:05:24+00:00</published>
<link rel='alternate' type='text/html' href='https://git.tavy.me/linux-stable.git/commit/?id=7a34997043f1c042ae91d780630445bbf23fa435'/>
<id>7a34997043f1c042ae91d780630445bbf23fa435</id>
<content type='text'>
commit a46c68a318b08f819047843abf349aeee5d10ac2 upstream.

While do swap, we should make sure there has no new dirty page since we
should swap i_data between two inode:
1.We should lock i_mmap_sem with write to avoid new pagecache from mmap
read/write;
2.Change filemap_flush to filemap_write_and_wait and move them to the
space protected by inode lock to avoid new pagecache from buffer read/write.

Signed-off-by: yangerkun &lt;yangerkun@huawei.com&gt;
Signed-off-by: Theodore Ts'o &lt;tytso@mit.edu&gt;
Cc: stable@kernel.org
Signed-off-by: Greg Kroah-Hartman &lt;gregkh@linuxfoundation.org&gt;

</content>
<content type='xhtml'>
<div xmlns='http://www.w3.org/1999/xhtml'>
<pre>
commit a46c68a318b08f819047843abf349aeee5d10ac2 upstream.

While do swap, we should make sure there has no new dirty page since we
should swap i_data between two inode:
1.We should lock i_mmap_sem with write to avoid new pagecache from mmap
read/write;
2.Change filemap_flush to filemap_write_and_wait and move them to the
space protected by inode lock to avoid new pagecache from buffer read/write.

Signed-off-by: yangerkun &lt;yangerkun@huawei.com&gt;
Signed-off-by: Theodore Ts'o &lt;tytso@mit.edu&gt;
Cc: stable@kernel.org
Signed-off-by: Greg Kroah-Hartman &lt;gregkh@linuxfoundation.org&gt;

</pre>
</div>
</content>
</entry>
<entry>
<title>ext4: fix check of inode in swap_inode_boot_loader</title>
<updated>2019-03-23T19:11:24+00:00</updated>
<author>
<name>yangerkun</name>
<email>yangerkun@huawei.com</email>
</author>
<published>2019-02-11T05:02:05+00:00</published>
<link rel='alternate' type='text/html' href='https://git.tavy.me/linux-stable.git/commit/?id=a0f6f657ac446194c190fab6aca9f6f71c8404f4'/>
<id>a0f6f657ac446194c190fab6aca9f6f71c8404f4</id>
<content type='text'>
commit 67a11611e1a5211f6569044fbf8150875764d1d0 upstream.

Before really do swap between inode and boot inode, something need to
check to avoid invalid or not permitted operation, like does this inode
has inline data. But the condition check should be protected by inode
lock to avoid change while swapping. Also some other condition will not
change between swapping, but there has no problem to do this under inode
lock.

Signed-off-by: yangerkun &lt;yangerkun@huawei.com&gt;
Signed-off-by: Theodore Ts'o &lt;tytso@mit.edu&gt;
Cc: stable@kernel.org
Signed-off-by: Greg Kroah-Hartman &lt;gregkh@linuxfoundation.org&gt;

</content>
<content type='xhtml'>
<div xmlns='http://www.w3.org/1999/xhtml'>
<pre>
commit 67a11611e1a5211f6569044fbf8150875764d1d0 upstream.

Before really do swap between inode and boot inode, something need to
check to avoid invalid or not permitted operation, like does this inode
has inline data. But the condition check should be protected by inode
lock to avoid change while swapping. Also some other condition will not
change between swapping, but there has no problem to do this under inode
lock.

Signed-off-by: yangerkun &lt;yangerkun@huawei.com&gt;
Signed-off-by: Theodore Ts'o &lt;tytso@mit.edu&gt;
Cc: stable@kernel.org
Signed-off-by: Greg Kroah-Hartman &lt;gregkh@linuxfoundation.org&gt;

</pre>
</div>
</content>
</entry>
<entry>
<title>Revert "ext4: use ext4_write_inode() when fsyncing w/o a journal"</title>
<updated>2019-02-01T04:41:11+00:00</updated>
<author>
<name>Theodore Ts'o</name>
<email>tytso@mit.edu</email>
</author>
<published>2019-02-01T04:41:11+00:00</published>
<link rel='alternate' type='text/html' href='https://git.tavy.me/linux-stable.git/commit/?id=8fdd60f2ae3682caf2a7258626abc21eb4711892'/>
<id>8fdd60f2ae3682caf2a7258626abc21eb4711892</id>
<content type='text'>
This reverts commit ad211f3e94b314a910d4af03178a0b52a7d1ee0a.

As Jan Kara pointed out, this change was unsafe since it means we lose
the call to sync_mapping_buffers() in the nojournal case.  The
original point of the commit was avoid taking the inode mutex (since
it causes a lockdep warning in generic/113); but we need the mutex in
order to call sync_mapping_buffers().

The real fix to this problem was discussed here:

https://lore.kernel.org/lkml/20181025150540.259281-4-bvanassche@acm.org

The proposed patch was to fix a syzbot complaint, but the problem can
also demonstrated via "kvm-xfstests -c nojournal generic/113".
Multiple solutions were discused in the e-mail thread, but none have
landed in the kernel as of this writing.  Anyway, commit
ad211f3e94b314 is absolutely the wrong way to suppress the lockdep, so
revert it.

Fixes: ad211f3e94b314a910d4af03178a0b52a7d1ee0a ("ext4: use ext4_write_inode() when fsyncing w/o a journal")
Signed-off-by: Theodore Ts'o &lt;tytso@mit.edu&gt;
Reported: Jan Kara &lt;jack@suse.cz&gt;
</content>
<content type='xhtml'>
<div xmlns='http://www.w3.org/1999/xhtml'>
<pre>
This reverts commit ad211f3e94b314a910d4af03178a0b52a7d1ee0a.

As Jan Kara pointed out, this change was unsafe since it means we lose
the call to sync_mapping_buffers() in the nojournal case.  The
original point of the commit was avoid taking the inode mutex (since
it causes a lockdep warning in generic/113); but we need the mutex in
order to call sync_mapping_buffers().

The real fix to this problem was discussed here:

https://lore.kernel.org/lkml/20181025150540.259281-4-bvanassche@acm.org

The proposed patch was to fix a syzbot complaint, but the problem can
also demonstrated via "kvm-xfstests -c nojournal generic/113".
Multiple solutions were discused in the e-mail thread, but none have
landed in the kernel as of this writing.  Anyway, commit
ad211f3e94b314 is absolutely the wrong way to suppress the lockdep, so
revert it.

Fixes: ad211f3e94b314a910d4af03178a0b52a7d1ee0a ("ext4: use ext4_write_inode() when fsyncing w/o a journal")
Signed-off-by: Theodore Ts'o &lt;tytso@mit.edu&gt;
Reported: Jan Kara &lt;jack@suse.cz&gt;
</pre>
</div>
</content>
</entry>
<entry>
<title>Merge tag 'ext4_for_linus_stable' of git://git.kernel.org/pub/scm/linux/kernel/git/tytso/ext4</title>
<updated>2019-01-06T20:19:23+00:00</updated>
<author>
<name>Linus Torvalds</name>
<email>torvalds@linux-foundation.org</email>
</author>
<published>2019-01-06T20:19:23+00:00</published>
<link rel='alternate' type='text/html' href='https://git.tavy.me/linux-stable.git/commit/?id=215240462a9672db771bb60adcc1c4fdf40e8ec4'/>
<id>215240462a9672db771bb60adcc1c4fdf40e8ec4</id>
<content type='text'>
Pull ext4 bug fixes from Ted Ts'o:
 "Fix a number of ext4 bugs"

* tag 'ext4_for_linus_stable' of git://git.kernel.org/pub/scm/linux/kernel/git/tytso/ext4:
  ext4: fix special inode number checks in __ext4_iget()
  ext4: track writeback errors using the generic tracking infrastructure
  ext4: use ext4_write_inode() when fsyncing w/o a journal
  ext4: avoid kernel warning when writing the superblock to a dead device
  ext4: fix a potential fiemap/page fault deadlock w/ inline_data
  ext4: make sure enough credits are reserved for dioread_nolock writes
</content>
<content type='xhtml'>
<div xmlns='http://www.w3.org/1999/xhtml'>
<pre>
Pull ext4 bug fixes from Ted Ts'o:
 "Fix a number of ext4 bugs"

* tag 'ext4_for_linus_stable' of git://git.kernel.org/pub/scm/linux/kernel/git/tytso/ext4:
  ext4: fix special inode number checks in __ext4_iget()
  ext4: track writeback errors using the generic tracking infrastructure
  ext4: use ext4_write_inode() when fsyncing w/o a journal
  ext4: avoid kernel warning when writing the superblock to a dead device
  ext4: fix a potential fiemap/page fault deadlock w/ inline_data
  ext4: make sure enough credits are reserved for dioread_nolock writes
</pre>
</div>
</content>
</entry>
</feed>
