linux-stable.git/fs/ext4/inline.c, branch v4.14.331 Linux kernel stable tree ext4: bail out of ext4_xattr_ibody_get() fails for any reason 2023-05-17T09:11:50+00:00 Theodore Ts'o tytso@mit.edu 2023-05-12T19:16:27+00:00 0fc1041a98be9b1f2eb040554e4d379951a29ad9 commit 2a534e1d0d1591e951f9ece2fb460b2ff92edabd upstream. In ext4_update_inline_data(), if ext4_xattr_ibody_get() fails for any reason, it's best if we just fail as opposed to stumbling on, especially if the failure is EFSCORRUPTED. Cc: stable@kernel.org Signed-off-by: Theodore Ts'o <tytso@mit.edu> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> 
commit 2a534e1d0d1591e951f9ece2fb460b2ff92edabd upstream.

In ext4_update_inline_data(), if ext4_xattr_ibody_get() fails for any
reason, it's best if we just fail as opposed to stumbling on,
especially if the failure is EFSCORRUPTED.

Cc: stable@kernel.org
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
ext4: add bounds checking in get_max_inline_xattr_value_size() 2023-05-17T09:11:50+00:00 Theodore Ts'o tytso@mit.edu 2023-05-12T19:11:02+00:00 5a229d21b98d132673096710e8281ef522dab1d1 commit 2220eaf90992c11d888fe771055d4de330385f01 upstream. Normally the extended attributes in the inode body would have been checked when the inode is first opened, but if someone is writing to the block device while the file system is mounted, it's possible for the inode table to get corrupted. Add bounds checking to avoid reading beyond the end of allocated memory if this happens. Reported-by: syzbot+1966db24521e5f6e23f7@syzkaller.appspotmail.com Link: https://syzkaller.appspot.com/bug?extid=1966db24521e5f6e23f7 Cc: stable@kernel.org Signed-off-by: Theodore Ts'o <tytso@mit.edu> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> 
commit 2220eaf90992c11d888fe771055d4de330385f01 upstream.

Normally the extended attributes in the inode body would have been
checked when the inode is first opened, but if someone is writing to
the block device while the file system is mounted, it's possible for
the inode table to get corrupted.  Add bounds checking to avoid
reading beyond the end of allocated memory if this happens.

Reported-by: syzbot+1966db24521e5f6e23f7@syzkaller.appspotmail.com
Link: https://syzkaller.appspot.com/bug?extid=1966db24521e5f6e23f7
Cc: stable@kernel.org
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
ext4: remove duplicate definition of ext4_xattr_ibody_inline_set() 2023-04-26T09:18:57+00:00 Ritesh Harjani riteshh@linux.ibm.com 2023-04-19T06:46:09+00:00 d729fbe6bf2445bd2a6f46a60ac9f40d4dd0d845 [ Upstream commit 310c097c2bdbea253d6ee4e064f3e65580ef93ac ] ext4_xattr_ibody_inline_set() & ext4_xattr_ibody_set() have the exact same definition. Hence remove ext4_xattr_ibody_inline_set() and all its call references. Convert the callers of it to call ext4_xattr_ibody_set() instead. [ Modified to preserve ext4_xattr_ibody_set() and remove ext4_xattr_ibody_inline_set() instead. -- TYT ] Signed-off-by: Ritesh Harjani <riteshh@linux.ibm.com> Link: https://lore.kernel.org/r/fd566b799bbbbe9b668eb5eecde5b5e319e3694f.1622685482.git.riteshh@linux.ibm.com Signed-off-by: Theodore Ts'o <tytso@mit.edu> Signed-off-by: Tudor Ambarus <tudor.ambarus@linaro.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> 
[ Upstream commit 310c097c2bdbea253d6ee4e064f3e65580ef93ac ]

ext4_xattr_ibody_inline_set() & ext4_xattr_ibody_set() have the exact
same definition.  Hence remove ext4_xattr_ibody_inline_set() and all
its call references. Convert the callers of it to call
ext4_xattr_ibody_set() instead.

[ Modified to preserve ext4_xattr_ibody_set() and remove
  ext4_xattr_ibody_inline_set() instead. -- TYT ]

Signed-off-by: Ritesh Harjani <riteshh@linux.ibm.com>
Link: https://lore.kernel.org/r/fd566b799bbbbe9b668eb5eecde5b5e319e3694f.1622685482.git.riteshh@linux.ibm.com
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Signed-off-by: Tudor Ambarus <tudor.ambarus@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
ext4: move where set the MAY_INLINE_DATA flag is set 2023-03-17T07:30:37+00:00 Ye Bin yebin10@huawei.com 2023-03-07T01:52:52+00:00 dbd0db0951fac728ce3e1b2f96d68e1a506bca70 commit 1dcdce5919115a471bf4921a57f20050c545a236 upstream. The only caller of ext4_find_inline_data_nolock() that needs setting of EXT4_STATE_MAY_INLINE_DATA flag is ext4_iget_extra_inode(). In ext4_write_inline_data_end() we just need to update inode->i_inline_off. Since we are going to add one more caller that does not need to set EXT4_STATE_MAY_INLINE_DATA, just move setting of EXT4_STATE_MAY_INLINE_DATA out to ext4_iget_extra_inode(). Signed-off-by: Ye Bin <yebin10@huawei.com> Cc: stable@kernel.org Reviewed-by: Jan Kara <jack@suse.cz> Link: https://lore.kernel.org/r/20230307015253.2232062-2-yebin@huaweicloud.com Signed-off-by: Theodore Ts'o <tytso@mit.edu> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> 
commit 1dcdce5919115a471bf4921a57f20050c545a236 upstream.

The only caller of ext4_find_inline_data_nolock() that needs setting of
EXT4_STATE_MAY_INLINE_DATA flag is ext4_iget_extra_inode().  In
ext4_write_inline_data_end() we just need to update inode->i_inline_off.
Since we are going to add one more caller that does not need to set
EXT4_STATE_MAY_INLINE_DATA, just move setting of EXT4_STATE_MAY_INLINE_DATA
out to ext4_iget_extra_inode().

Signed-off-by: Ye Bin <yebin10@huawei.com>
Cc: stable@kernel.org
Reviewed-by: Jan Kara <jack@suse.cz>
Link: https://lore.kernel.org/r/20230307015253.2232062-2-yebin@huaweicloud.com
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
ext4: correct max_inline_xattr_value_size computing 2022-08-25T09:11:28+00:00 Baokun Li libaokun1@huawei.com 2022-06-16T02:13:57+00:00 48b5a08e9fa285b1e8fb7ca154629904c37dcd95 commit c9fd167d57133c5b748d16913c4eabc55e531c73 upstream. If the ext4 inode does not have xattr space, 0 is returned in the get_max_inline_xattr_value_size function. Otherwise, the function returns a negative value when the inode does not contain EXT4_STATE_XATTR. Cc: stable@kernel.org Signed-off-by: Baokun Li <libaokun1@huawei.com> Reviewed-by: Ritesh Harjani (IBM) <ritesh.list@gmail.com> Reviewed-by: Jan Kara <jack@suse.cz> Link: https://lore.kernel.org/r/20220616021358.2504451-4-libaokun1@huawei.com Signed-off-by: Theodore Ts'o <tytso@mit.edu> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> 
commit c9fd167d57133c5b748d16913c4eabc55e531c73 upstream.

If the ext4 inode does not have xattr space, 0 is returned in the
get_max_inline_xattr_value_size function. Otherwise, the function returns
a negative value when the inode does not contain EXT4_STATE_XATTR.

Cc: stable@kernel.org
Signed-off-by: Baokun Li <libaokun1@huawei.com>
Reviewed-by: Ritesh Harjani (IBM) <ritesh.list@gmail.com>
Reviewed-by: Jan Kara <jack@suse.cz>
Link: https://lore.kernel.org/r/20220616021358.2504451-4-libaokun1@huawei.com
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
ext4: fix bug_on in ext4_writepages 2022-06-14T14:53:52+00:00 Ye Bin yebin10@huawei.com 2022-05-16T12:26:34+00:00 b2b78f5bf2d453dda3903955efee059260787a42 commit ef09ed5d37b84d18562b30cf7253e57062d0db05 upstream. we got issue as follows: EXT4-fs error (device loop0): ext4_mb_generate_buddy:1141: group 0, block bitmap and bg descriptor inconsistent: 25 vs 31513 free cls ------------[ cut here ]------------ kernel BUG at fs/ext4/inode.c:2708! invalid opcode: 0000 [#1] PREEMPT SMP KASAN PTI CPU: 2 PID: 2147 Comm: rep Not tainted 5.18.0-rc2-next-20220413+ #155 RIP: 0010:ext4_writepages+0x1977/0x1c10 RSP: 0018:ffff88811d3e7880 EFLAGS: 00010246 RAX: 0000000000000000 RBX: 0000000000000001 RCX: ffff88811c098000 RDX: 0000000000000000 RSI: ffff88811c098000 RDI: 0000000000000002 RBP: ffff888128140f50 R08: ffffffffb1ff6387 R09: 0000000000000000 R10: 0000000000000007 R11: ffffed10250281ea R12: 0000000000000001 R13: 00000000000000a4 R14: ffff88811d3e7bb8 R15: ffff888128141028 FS: 00007f443aed9740(0000) GS:ffff8883aef00000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 0000000020007200 CR3: 000000011c2a4000 CR4: 00000000000006e0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 Call Trace: <TASK> do_writepages+0x130/0x3a0 filemap_fdatawrite_wbc+0x83/0xa0 filemap_flush+0xab/0xe0 ext4_alloc_da_blocks+0x51/0x120 __ext4_ioctl+0x1534/0x3210 __x64_sys_ioctl+0x12c/0x170 do_syscall_64+0x3b/0x90 It may happen as follows: 1. write inline_data inode vfs_write new_sync_write ext4_file_write_iter ext4_buffered_write_iter generic_perform_write ext4_da_write_begin ext4_da_write_inline_data_begin -> If inline data size too small will allocate block to write, then mapping will has dirty page ext4_da_convert_inline_data_to_extent ->clear EXT4_STATE_MAY_INLINE_DATA 2. fallocate do_vfs_ioctl ioctl_preallocate vfs_fallocate ext4_fallocate ext4_convert_inline_data ext4_convert_inline_data_nolock ext4_map_blocks -> fail will goto restore data ext4_restore_inline_data ext4_create_inline_data ext4_write_inline_data ext4_set_inode_state -> set inode EXT4_STATE_MAY_INLINE_DATA 3. writepages __ext4_ioctl ext4_alloc_da_blocks filemap_flush filemap_fdatawrite_wbc do_writepages ext4_writepages if (ext4_has_inline_data(inode)) BUG_ON(ext4_test_inode_state(inode, EXT4_STATE_MAY_INLINE_DATA)) The root cause of this issue is we destory inline data until call ext4_writepages under delay allocation mode. But there maybe already convert from inline to extent. To solve this issue, we call filemap_flush first.. Cc: stable@kernel.org Signed-off-by: Ye Bin <yebin10@huawei.com> Reviewed-by: Jan Kara <jack@suse.cz> Link: https://lore.kernel.org/r/20220516122634.1690462-1-yebin10@huawei.com Signed-off-by: Theodore Ts'o <tytso@mit.edu> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> 
commit ef09ed5d37b84d18562b30cf7253e57062d0db05 upstream.

we got issue as follows:
EXT4-fs error (device loop0): ext4_mb_generate_buddy:1141: group 0, block bitmap and bg descriptor inconsistent: 25 vs 31513 free cls
------------[ cut here ]------------
kernel BUG at fs/ext4/inode.c:2708!
invalid opcode: 0000 [#1] PREEMPT SMP KASAN PTI
CPU: 2 PID: 2147 Comm: rep Not tainted 5.18.0-rc2-next-20220413+ #155
RIP: 0010:ext4_writepages+0x1977/0x1c10
RSP: 0018:ffff88811d3e7880 EFLAGS: 00010246
RAX: 0000000000000000 RBX: 0000000000000001 RCX: ffff88811c098000
RDX: 0000000000000000 RSI: ffff88811c098000 RDI: 0000000000000002
RBP: ffff888128140f50 R08: ffffffffb1ff6387 R09: 0000000000000000
R10: 0000000000000007 R11: ffffed10250281ea R12: 0000000000000001
R13: 00000000000000a4 R14: ffff88811d3e7bb8 R15: ffff888128141028
FS:  00007f443aed9740(0000) GS:ffff8883aef00000(0000) knlGS:0000000000000000
CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 0000000020007200 CR3: 000000011c2a4000 CR4: 00000000000006e0
DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400
Call Trace:
 <TASK>
 do_writepages+0x130/0x3a0
 filemap_fdatawrite_wbc+0x83/0xa0
 filemap_flush+0xab/0xe0
 ext4_alloc_da_blocks+0x51/0x120
 __ext4_ioctl+0x1534/0x3210
 __x64_sys_ioctl+0x12c/0x170
 do_syscall_64+0x3b/0x90

It may happen as follows:
1. write inline_data inode
vfs_write
  new_sync_write
    ext4_file_write_iter
      ext4_buffered_write_iter
        generic_perform_write
          ext4_da_write_begin
            ext4_da_write_inline_data_begin -> If inline data size too
            small will allocate block to write, then mapping will has
            dirty page
                ext4_da_convert_inline_data_to_extent ->clear EXT4_STATE_MAY_INLINE_DATA
2. fallocate
do_vfs_ioctl
  ioctl_preallocate
    vfs_fallocate
      ext4_fallocate
        ext4_convert_inline_data
          ext4_convert_inline_data_nolock
            ext4_map_blocks -> fail will goto restore data
            ext4_restore_inline_data
              ext4_create_inline_data
              ext4_write_inline_data
              ext4_set_inode_state -> set inode EXT4_STATE_MAY_INLINE_DATA
3. writepages
__ext4_ioctl
  ext4_alloc_da_blocks
    filemap_flush
      filemap_fdatawrite_wbc
        do_writepages
          ext4_writepages
            if (ext4_has_inline_data(inode))
              BUG_ON(ext4_test_inode_state(inode, EXT4_STATE_MAY_INLINE_DATA))

The root cause of this issue is we destory inline data until call
ext4_writepages under delay allocation mode.  But there maybe already
convert from inline to extent.  To solve this issue, we call
filemap_flush first..

Cc: stable@kernel.org
Signed-off-by: Ye Bin <yebin10@huawei.com>
Reviewed-by: Jan Kara <jack@suse.cz>
Link: https://lore.kernel.org/r/20220516122634.1690462-1-yebin10@huawei.com
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
ext4: fix error handling in ext4_restore_inline_data() 2022-02-08T17:16:30+00:00 Ritesh Harjani riteshh@linux.ibm.com 2022-01-17T12:11:47+00:00 19cfb877245a4b882cd71e1c56c0b7a527a06384 commit 897026aaa73eb2517dfea8d147f20ddb0b813044 upstream. While running "./check -I 200 generic/475" it sometimes gives below kernel BUG(). Ideally we should not call ext4_write_inline_data() if ext4_create_inline_data() has failed. <log snip> [73131.453234] kernel BUG at fs/ext4/inline.c:223! <code snip> 212 static void ext4_write_inline_data(struct inode *inode, struct ext4_iloc *iloc, 213 void *buffer, loff_t pos, unsigned int len) 214 { <...> 223 BUG_ON(!EXT4_I(inode)->i_inline_off); 224 BUG_ON(pos + len > EXT4_I(inode)->i_inline_size); This patch handles the error and prints out a emergency msg saying potential data loss for the given inode (since we couldn't restore the original inline_data due to some previous error). [ 9571.070313] EXT4-fs (dm-0): error restoring inline_data for inode -- potential data loss! (inode 1703982, error -30) Reported-by: Eric Whitney <enwlinux@gmail.com> Signed-off-by: Ritesh Harjani <riteshh@linux.ibm.com> Reviewed-by: Jan Kara <jack@suse.cz> Link: https://lore.kernel.org/r/9f4cd7dfd54fa58ff27270881823d94ddf78dd07.1642416995.git.riteshh@linux.ibm.com Signed-off-by: Theodore Ts'o <tytso@mit.edu> Cc: stable@kernel.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> 
commit 897026aaa73eb2517dfea8d147f20ddb0b813044 upstream.

While running "./check -I 200 generic/475" it sometimes gives below
kernel BUG(). Ideally we should not call ext4_write_inline_data() if
ext4_create_inline_data() has failed.

<log snip>
[73131.453234] kernel BUG at fs/ext4/inline.c:223!

<code snip>
 212 static void ext4_write_inline_data(struct inode *inode, struct ext4_iloc *iloc,
 213                                    void *buffer, loff_t pos, unsigned int len)
 214 {
<...>
 223         BUG_ON(!EXT4_I(inode)->i_inline_off);
 224         BUG_ON(pos + len > EXT4_I(inode)->i_inline_size);

This patch handles the error and prints out a emergency msg saying potential
data loss for the given inode (since we couldn't restore the original
inline_data due to some previous error).

[ 9571.070313] EXT4-fs (dm-0): error restoring inline_data for inode -- potential data loss! (inode 1703982, error -30)

Reported-by: Eric Whitney <enwlinux@gmail.com>
Signed-off-by: Ritesh Harjani <riteshh@linux.ibm.com>
Reviewed-by: Jan Kara <jack@suse.cz>
Link: https://lore.kernel.org/r/9f4cd7dfd54fa58ff27270881823d94ddf78dd07.1642416995.git.riteshh@linux.ibm.com
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Cc: stable@kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
ext4: fix race writing to an inline_data file while its xattrs are changing 2021-09-22T09:45:14+00:00 Theodore Ts'o tytso@mit.edu 2021-08-21T03:44:17+00:00 9569234645f102025aaf0fc83d3dcbf1b8cbf2dc commit a54c4613dac1500b40e4ab55199f7c51f028e848 upstream. The location of the system.data extended attribute can change whenever xattr_sem is not taken. So we need to recalculate the i_inline_off field since it mgiht have changed between ext4_write_begin() and ext4_write_end(). This means that caching i_inline_off is probably not helpful, so in the long run we should probably get rid of it and shrink the in-memory ext4 inode slightly, but let's fix the race the simple way for now. Cc: stable@kernel.org Fixes: f19d5870cbf72 ("ext4: add normal write support for inline data") Reported-by: syzbot+13146364637c7363a7de@syzkaller.appspotmail.com Signed-off-by: Theodore Ts'o <tytso@mit.edu> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> 
commit a54c4613dac1500b40e4ab55199f7c51f028e848 upstream.

The location of the system.data extended attribute can change whenever
xattr_sem is not taken.  So we need to recalculate the i_inline_off
field since it mgiht have changed between ext4_write_begin() and
ext4_write_end().

This means that caching i_inline_off is probably not helpful, so in
the long run we should probably get rid of it and shrink the in-memory
ext4 inode slightly, but let's fix the race the simple way for now.

Cc: stable@kernel.org
Fixes: f19d5870cbf72 ("ext4: add normal write support for inline data")
Reported-by: syzbot+13146364637c7363a7de@syzkaller.appspotmail.com
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
ext4: unlock xattr_sem properly in ext4_inline_data_truncate() 2020-11-18T17:27:57+00:00 Joseph Qi joseph.qi@linux.alibaba.com 2020-11-03T02:29:02+00:00 e088e703db45fe58d6755d7fba984265192c24b6 commit 7067b2619017d51e71686ca9756b454de0e5826a upstream. It takes xattr_sem to check inline data again but without unlock it in case not have. So unlock it before return. Fixes: aef1c8513c1f ("ext4: let ext4_truncate handle inline data correctly") Reported-by: Dan Carpenter <dan.carpenter@oracle.com> Cc: Tao Ma <boyu.mt@taobao.com> Signed-off-by: Joseph Qi <joseph.qi@linux.alibaba.com> Reviewed-by: Andreas Dilger <adilger@dilger.ca> Link: https://lore.kernel.org/r/1604370542-124630-1-git-send-email-joseph.qi@linux.alibaba.com Signed-off-by: Theodore Ts'o <tytso@mit.edu> Cc: stable@kernel.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> 
commit 7067b2619017d51e71686ca9756b454de0e5826a upstream.

It takes xattr_sem to check inline data again but without unlock it
in case not have. So unlock it before return.

Fixes: aef1c8513c1f ("ext4: let ext4_truncate handle inline data correctly")
Reported-by: Dan Carpenter <dan.carpenter@oracle.com>
Cc: Tao Ma <boyu.mt@taobao.com>
Signed-off-by: Joseph Qi <joseph.qi@linux.alibaba.com>
Reviewed-by: Andreas Dilger <adilger@dilger.ca>
Link: https://lore.kernel.org/r/1604370542-124630-1-git-send-email-joseph.qi@linux.alibaba.com
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Cc: stable@kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
ext4: set error return correctly when ext4_htree_store_dirent fails 2020-01-27T13:46:42+00:00 Colin Ian King colin.king@canonical.com 2019-08-12T18:29:38+00:00 25f9e3e502a92782b5f9f270ba15b25490f65a77 [ Upstream commit 7a14826ede1d714f0bb56de8167c0e519041eeda ] Currently when the call to ext4_htree_store_dirent fails the error return variable 'ret' is is not being set to the error code and variable count is instead, hence the error code is not being returned. Fix this by assigning ret to the error return code. Addresses-Coverity: ("Unused value") Fixes: 8af0f0822797 ("ext4: fix readdir error in the case of inline_data+dir_index") Signed-off-by: Colin Ian King <colin.king@canonical.com> Signed-off-by: Theodore Ts'o <tytso@mit.edu> Signed-off-by: Sasha Levin <sashal@kernel.org> 
[ Upstream commit 7a14826ede1d714f0bb56de8167c0e519041eeda ]

Currently when the call to ext4_htree_store_dirent fails the error return
variable 'ret' is is not being set to the error code and variable count is
instead, hence the error code is not being returned.  Fix this by assigning
ret to the error return code.

Addresses-Coverity: ("Unused value")
Fixes: 8af0f0822797 ("ext4: fix readdir error in the case of inline_data+dir_index")
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Signed-off-by: Sasha Levin <sashal@kernel.org>