linux-stable.git/fs/ext2, branch v7.0.5 Linux kernel stable tree ext2: reject inodes with zero i_nlink and valid mode in ext2_iget() 2026-05-07T04:13:48+00:00 Vasiliy Kovalev kovalev@altlinux.org 2026-04-04T15:20:11+00:00 470264bbec499e276a89a6431144ae58f411ea4d commit 25947cc5b2374cd5bf627fe3141496444260d04f upstream. ext2_iget() already rejects inodes with i_nlink == 0 when i_mode is zero or i_dtime is set, treating them as deleted. However, the case of i_nlink == 0 with a non-zero mode and zero dtime slips through. Since ext2 has no orphan list, such a combination can only result from filesystem corruption - a legitimate inode deletion always sets either i_dtime or clears i_mode before freeing the inode. A crafted image can exploit this gap to present such an inode to the VFS, which then triggers WARN_ON inside drop_nlink() (fs/inode.c) via ext2_unlink(), ext2_rename() and ext2_rmdir(): WARNING: CPU: 3 PID: 609 at fs/inode.c:336 drop_nlink+0xad/0xd0 fs/inode.c:336 CPU: 3 UID: 0 PID: 609 Comm: syz-executor Not tainted 6.12.77+ #1 Call Trace: <TASK> inode_dec_link_count include/linux/fs.h:2518 [inline] ext2_unlink+0x26c/0x300 fs/ext2/namei.c:295 vfs_unlink+0x2fc/0x9b0 fs/namei.c:4477 do_unlinkat+0x53e/0x730 fs/namei.c:4541 __x64_sys_unlink+0xc6/0x110 fs/namei.c:4587 do_syscall_64+0xf5/0x220 arch/x86/entry/common.c:78 entry_SYSCALL_64_after_hwframe+0x77/0x7f </TASK> WARNING: CPU: 0 PID: 646 at fs/inode.c:336 drop_nlink+0xad/0xd0 fs/inode.c:336 CPU: 0 UID: 0 PID: 646 Comm: syz.0.17 Not tainted 6.12.77+ #1 Call Trace: <TASK> inode_dec_link_count include/linux/fs.h:2518 [inline] ext2_rename+0x35e/0x850 fs/ext2/namei.c:374 vfs_rename+0xf2f/0x2060 fs/namei.c:5021 do_renameat2+0xbe2/0xd50 fs/namei.c:5178 __x64_sys_rename+0x7e/0xa0 fs/namei.c:5223 do_syscall_64+0xf5/0x220 arch/x86/entry/common.c:78 entry_SYSCALL_64_after_hwframe+0x77/0x7f </TASK> WARNING: CPU: 0 PID: 634 at fs/inode.c:336 drop_nlink+0xad/0xd0 fs/inode.c:336 CPU: 0 UID: 0 PID: 634 Comm: syz-executor Not tainted 6.12.77+ #1 Call Trace: <TASK> inode_dec_link_count include/linux/fs.h:2518 [inline] ext2_rmdir+0xca/0x110 fs/ext2/namei.c:311 vfs_rmdir+0x204/0x690 fs/namei.c:4348 do_rmdir+0x372/0x3e0 fs/namei.c:4407 __x64_sys_unlinkat+0xf0/0x130 fs/namei.c:4577 do_syscall_64+0xf5/0x220 arch/x86/entry/common.c:78 entry_SYSCALL_64_after_hwframe+0x77/0x7f </TASK> Extend the existing i_nlink == 0 check to also catch this case, reporting the corruption via ext2_error() and returning -EFSCORRUPTED. This rejects the inode at load time and prevents it from reaching any of the namei.c paths. Found by Linux Verification Center (linuxtesting.org) with Syzkaller. Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2") Cc: stable@vger.kernel.org Signed-off-by: Vasiliy Kovalev <kovalev@altlinux.org> Link: https://patch.msgid.link/20260404152011.2590197-1-kovalev@altlinux.org Signed-off-by: Jan Kara <jack@suse.cz> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> 
commit 25947cc5b2374cd5bf627fe3141496444260d04f upstream.

ext2_iget() already rejects inodes with i_nlink == 0 when i_mode is
zero or i_dtime is set, treating them as deleted. However, the case of
i_nlink == 0 with a non-zero mode and zero dtime slips through. Since
ext2 has no orphan list, such a combination can only result from
filesystem corruption - a legitimate inode deletion always sets either
i_dtime or clears i_mode before freeing the inode.

A crafted image can exploit this gap to present such an inode to the
VFS, which then triggers WARN_ON inside drop_nlink() (fs/inode.c) via
ext2_unlink(), ext2_rename() and ext2_rmdir():

WARNING: CPU: 3 PID: 609 at fs/inode.c:336 drop_nlink+0xad/0xd0 fs/inode.c:336
CPU: 3 UID: 0 PID: 609 Comm: syz-executor Not tainted 6.12.77+ #1
Call Trace:
 <TASK>
 inode_dec_link_count include/linux/fs.h:2518 [inline]
 ext2_unlink+0x26c/0x300 fs/ext2/namei.c:295
 vfs_unlink+0x2fc/0x9b0 fs/namei.c:4477
 do_unlinkat+0x53e/0x730 fs/namei.c:4541
 __x64_sys_unlink+0xc6/0x110 fs/namei.c:4587
 do_syscall_64+0xf5/0x220 arch/x86/entry/common.c:78
 entry_SYSCALL_64_after_hwframe+0x77/0x7f
 </TASK>

WARNING: CPU: 0 PID: 646 at fs/inode.c:336 drop_nlink+0xad/0xd0 fs/inode.c:336
CPU: 0 UID: 0 PID: 646 Comm: syz.0.17 Not tainted 6.12.77+ #1
Call Trace:
 <TASK>
 inode_dec_link_count include/linux/fs.h:2518 [inline]
 ext2_rename+0x35e/0x850 fs/ext2/namei.c:374
 vfs_rename+0xf2f/0x2060 fs/namei.c:5021
 do_renameat2+0xbe2/0xd50 fs/namei.c:5178
 __x64_sys_rename+0x7e/0xa0 fs/namei.c:5223
 do_syscall_64+0xf5/0x220 arch/x86/entry/common.c:78
 entry_SYSCALL_64_after_hwframe+0x77/0x7f
 </TASK>

WARNING: CPU: 0 PID: 634 at fs/inode.c:336 drop_nlink+0xad/0xd0 fs/inode.c:336
CPU: 0 UID: 0 PID: 634 Comm: syz-executor Not tainted 6.12.77+ #1
Call Trace:
 <TASK>
 inode_dec_link_count include/linux/fs.h:2518 [inline]
 ext2_rmdir+0xca/0x110 fs/ext2/namei.c:311
 vfs_rmdir+0x204/0x690 fs/namei.c:4348
 do_rmdir+0x372/0x3e0 fs/namei.c:4407
 __x64_sys_unlinkat+0xf0/0x130 fs/namei.c:4577
 do_syscall_64+0xf5/0x220 arch/x86/entry/common.c:78
 entry_SYSCALL_64_after_hwframe+0x77/0x7f
 </TASK>

Extend the existing i_nlink == 0 check to also catch this case,
reporting the corruption via ext2_error() and returning -EFSCORRUPTED.
This rejects the inode at load time and prevents it from reaching any
of the namei.c paths.

Found by Linux Verification Center (linuxtesting.org) with Syzkaller.

Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2")
Cc: stable@vger.kernel.org
Signed-off-by: Vasiliy Kovalev <kovalev@altlinux.org>
Link: https://patch.msgid.link/20260404152011.2590197-1-kovalev@altlinux.org
Signed-off-by: Jan Kara <jack@suse.cz>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Convert more 'alloc_obj' cases to default GFP_KERNEL arguments 2026-02-22T04:03:00+00:00 Linus Torvalds torvalds@linux-foundation.org 2026-02-22T04:03:00+00:00 32a92f8c89326985e05dce8b22d3f0aa07a3e1bd This converts some of the visually simpler cases that have been split over multiple lines. I only did the ones that are easy to verify the resulting diff by having just that final GFP_KERNEL argument on the next line. Somebody should probably do a proper coccinelle script for this, but for me the trivial script actually resulted in an assertion failure in the middle of the script. I probably had made it a bit _too_ trivial. So after fighting that far a while I decided to just do some of the syntactically simpler cases with variations of the previous 'sed' scripts. The more syntactically complex multi-line cases would mostly really want whitespace cleanup anyway. Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> 
This converts some of the visually simpler cases that have been split
over multiple lines.  I only did the ones that are easy to verify the
resulting diff by having just that final GFP_KERNEL argument on the next
line.

Somebody should probably do a proper coccinelle script for this, but for
me the trivial script actually resulted in an assertion failure in the
middle of the script.  I probably had made it a bit _too_ trivial.

So after fighting that far a while I decided to just do some of the
syntactically simpler cases with variations of the previous 'sed'
scripts.

The more syntactically complex multi-line cases would mostly really want
whitespace cleanup anyway.

Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Convert 'alloc_obj' family to use the new default GFP_KERNEL argument 2026-02-22T01:09:51+00:00 Linus Torvalds torvalds@linux-foundation.org 2026-02-22T00:37:42+00:00 bf4afc53b77aeaa48b5409da5c8da6bb4eff7f43 This was done entirely with mindless brute force, using git grep -l '\<k[vmz]*alloc_objs*(.*, GFP_KERNEL)' | xargs sed -i 's/\(alloc_objs*(.*\), GFP_KERNEL)/\1)/' to convert the new alloc_obj() users that had a simple GFP_KERNEL argument to just drop that argument. Note that due to the extreme simplicity of the scripting, any slightly more complex cases spread over multiple lines would not be triggered: they definitely exist, but this covers the vast bulk of the cases, and the resulting diff is also then easier to check automatically. For the same reason the 'flex' versions will be done as a separate conversion. Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> 
This was done entirely with mindless brute force, using

    git grep -l '\<k[vmz]*alloc_objs*(.*, GFP_KERNEL)' |
        xargs sed -i 's/\(alloc_objs*(.*\), GFP_KERNEL)/\1)/'

to convert the new alloc_obj() users that had a simple GFP_KERNEL
argument to just drop that argument.

Note that due to the extreme simplicity of the scripting, any slightly
more complex cases spread over multiple lines would not be triggered:
they definitely exist, but this covers the vast bulk of the cases, and
the resulting diff is also then easier to check automatically.

For the same reason the 'flex' versions will be done as a separate
conversion.

Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
treewide: Replace kmalloc with kmalloc_obj for non-scalar types 2026-02-21T09:02:28+00:00 Kees Cook kees@kernel.org 2026-02-21T07:49:23+00:00 69050f8d6d075dc01af7a5f2f550a8067510366f This is the result of running the Coccinelle script from scripts/coccinelle/api/kmalloc_objs.cocci. The script is designed to avoid scalar types (which need careful case-by-case checking), and instead replace kmalloc-family calls that allocate struct or union object instances: Single allocations: kmalloc(sizeof(TYPE), ...) are replaced with: kmalloc_obj(TYPE, ...) Array allocations: kmalloc_array(COUNT, sizeof(TYPE), ...) are replaced with: kmalloc_objs(TYPE, COUNT, ...) Flex array allocations: kmalloc(struct_size(PTR, FAM, COUNT), ...) are replaced with: kmalloc_flex(*PTR, FAM, COUNT, ...) (where TYPE may also be *VAR) The resulting allocations no longer return "void *", instead returning "TYPE *". Signed-off-by: Kees Cook <kees@kernel.org> 
This is the result of running the Coccinelle script from
scripts/coccinelle/api/kmalloc_objs.cocci. The script is designed to
avoid scalar types (which need careful case-by-case checking), and
instead replace kmalloc-family calls that allocate struct or union
object instances:

Single allocations:	kmalloc(sizeof(TYPE), ...)
are replaced with:	kmalloc_obj(TYPE, ...)

Array allocations:	kmalloc_array(COUNT, sizeof(TYPE), ...)
are replaced with:	kmalloc_objs(TYPE, COUNT, ...)

Flex array allocations:	kmalloc(struct_size(PTR, FAM, COUNT), ...)
are replaced with:	kmalloc_flex(*PTR, FAM, COUNT, ...)

(where TYPE may also be *VAR)

The resulting allocations no longer return "void *", instead returning
"TYPE *".

Signed-off-by: Kees Cook <kees@kernel.org>
Merge tag 'vfs-7.0-rc1.fserror' of git://git.kernel.org/pub/scm/linux/kernel/git/vfs/vfs 2026-02-09T20:21:37+00:00 Linus Torvalds torvalds@linux-foundation.org 2026-02-09T20:21:37+00:00 dd466ea0029961ee0ee6e8e468faa1506275c8a9 Pull vfs error reporting updates from Christian Brauner: "This contains the changes to support generic I/O error reporting. Filesystems currently have no standard mechanism for reporting metadata corruption and file I/O errors to userspace via fsnotify. Each filesystem (xfs, ext4, erofs, f2fs, etc.) privately defines EFSCORRUPTED, and error reporting to fanotify is inconsistent or absent entirely. This introduces a generic fserror infrastructure built around struct super_block that gives filesystems a standard way to queue metadata and file I/O error reports for delivery to fsnotify. Errors are queued via mempools and queue_work to avoid holding filesystem locks in the notification path; unmount waits for pending events to drain. A new super_operations::report_error callback lets filesystem drivers respond to file I/O errors themselves (to be used by an upcoming XFS self-healing patchset). On the uapi side, EFSCORRUPTED and EUCLEAN are promoted from private per-filesystem definitions to canonical errno.h values across all architectures" * tag 'vfs-7.0-rc1.fserror' of git://git.kernel.org/pub/scm/linux/kernel/git/vfs/vfs: ext4: convert to new fserror helpers xfs: translate fsdax media errors into file "data lost" errors when convenient xfs: report fs metadata errors via fsnotify iomap: report file I/O errors to the VFS fs: report filesystem and file I/O errors to fsnotify uapi: promote EFSCORRUPTED and EUCLEAN to errno.h 
Pull vfs error reporting updates from Christian Brauner:
 "This contains the changes to support generic I/O error reporting.

  Filesystems currently have no standard mechanism for reporting
  metadata corruption and file I/O errors to userspace via fsnotify.
  Each filesystem (xfs, ext4, erofs, f2fs, etc.) privately defines
  EFSCORRUPTED, and error reporting to fanotify is inconsistent or
  absent entirely.

  This introduces a generic fserror infrastructure built around struct
  super_block that gives filesystems a standard way to queue metadata
  and file I/O error reports for delivery to fsnotify.

  Errors are queued via mempools and queue_work to avoid holding
  filesystem locks in the notification path; unmount waits for pending
  events to drain. A new super_operations::report_error callback lets
  filesystem drivers respond to file I/O errors themselves (to be used
  by an upcoming XFS self-healing patchset).

  On the uapi side, EFSCORRUPTED and EUCLEAN are promoted from private
  per-filesystem definitions to canonical errno.h values across all
  architectures"

* tag 'vfs-7.0-rc1.fserror' of git://git.kernel.org/pub/scm/linux/kernel/git/vfs/vfs:
  ext4: convert to new fserror helpers
  xfs: translate fsdax media errors into file "data lost" errors when convenient
  xfs: report fs metadata errors via fsnotify
  iomap: report file I/O errors to the VFS
  fs: report filesystem and file I/O errors to fsnotify
  uapi: promote EFSCORRUPTED and EUCLEAN to errno.h
uapi: promote EFSCORRUPTED and EUCLEAN to errno.h 2026-01-13T08:58:01+00:00 Darrick J. Wong djwong@kernel.org 2026-01-13T00:31:09+00:00 602544773763da411ffa67567fa1d146f3a40231 Stop definining these privately and instead move them to the uapi errno.h so that they become canonical instead of copy pasta. Cc: linux-api@vger.kernel.org Signed-off-by: Darrick J. Wong <djwong@kernel.org> Link: https://patch.msgid.link/176826402587.3490369.17659117524205214600.stgit@frogsfrogsfrogs Reviewed-by: Gao Xiang <hsiangkao@linux.alibaba.com> Reviewed-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Jan Kara <jack@suse.cz> Signed-off-by: Christian Brauner <brauner@kernel.org> 
Stop definining these privately and instead move them to the uapi
errno.h so that they become canonical instead of copy pasta.

Cc: linux-api@vger.kernel.org
Signed-off-by: Darrick J. Wong <djwong@kernel.org>
Link: https://patch.msgid.link/176826402587.3490369.17659117524205214600.stgit@frogsfrogsfrogs
Reviewed-by: Gao Xiang <hsiangkao@linux.alibaba.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Jan Kara <jack@suse.cz>
Signed-off-by: Christian Brauner <brauner@kernel.org>
ext2: add setlease file operation 2026-01-12T09:55:45+00:00 Jeff Layton jlayton@kernel.org 2026-01-08T17:13:00+00:00 ccdc2e0569f5ff83cd1c6a5c7bb214e33e21bdec Add the setlease file_operation to ext2_file_operations and ext2_dir_operations, pointing to generic_setlease. A future patch will change the default behavior to reject lease attempts with -EINVAL when there is no setlease file operation defined. Add generic_setlease to retain the ability to set leases on this filesystem. Signed-off-by: Jeff Layton <jlayton@kernel.org> Link: https://patch.msgid.link/20260108-setlease-6-20-v1-5-ea4dec9b67fa@kernel.org Acked-by: Al Viro <viro@zeniv.linux.org.uk> Acked-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Jan Kara <jack@suse.cz> Signed-off-by: Christian Brauner <brauner@kernel.org> 
Add the setlease file_operation to ext2_file_operations and
ext2_dir_operations, pointing to generic_setlease.  A future patch will
change the default behavior to reject lease attempts with -EINVAL when
there is no setlease file operation defined. Add generic_setlease to
retain the ability to set leases on this filesystem.

Signed-off-by: Jeff Layton <jlayton@kernel.org>
Link: https://patch.msgid.link/20260108-setlease-6-20-v1-5-ea4dec9b67fa@kernel.org
Acked-by: Al Viro <viro@zeniv.linux.org.uk>
Acked-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Jan Kara <jack@suse.cz>
Signed-off-by: Christian Brauner <brauner@kernel.org>
Coccinelle-based conversion to use ->i_state accessors 2025-10-20T18:22:26+00:00 Mateusz Guzik mjguzik@gmail.com 2025-10-09T07:59:18+00:00 b4dbfd8653b34b0ab6c024ceda32af488c9b5602 All places were patched by coccinelle with the default expecting that ->i_lock is held, afterwards entries got fixed up by hand to use unlocked variants as needed. The script: @@ expression inode, flags; @@ - inode->i_state & flags + inode_state_read(inode) & flags @@ expression inode, flags; @@ - inode->i_state &= ~flags + inode_state_clear(inode, flags) @@ expression inode, flag1, flag2; @@ - inode->i_state &= ~flag1 & ~flag2 + inode_state_clear(inode, flag1 | flag2) @@ expression inode, flags; @@ - inode->i_state |= flags + inode_state_set(inode, flags) @@ expression inode, flags; @@ - inode->i_state = flags + inode_state_assign(inode, flags) @@ expression inode, flags; @@ - flags = inode->i_state + flags = inode_state_read(inode) @@ expression inode, flags; @@ - READ_ONCE(inode->i_state) & flags + inode_state_read(inode) & flags Signed-off-by: Mateusz Guzik <mjguzik@gmail.com> Signed-off-by: Christian Brauner <brauner@kernel.org> 
All places were patched by coccinelle with the default expecting that
->i_lock is held, afterwards entries got fixed up by hand to use
unlocked variants as needed.

The script:
@@
expression inode, flags;
@@

- inode->i_state & flags
+ inode_state_read(inode) & flags

@@
expression inode, flags;
@@

- inode->i_state &= ~flags
+ inode_state_clear(inode, flags)

@@
expression inode, flag1, flag2;
@@

- inode->i_state &= ~flag1 & ~flag2
+ inode_state_clear(inode, flag1 | flag2)

@@
expression inode, flags;
@@

- inode->i_state |= flags
+ inode_state_set(inode, flags)

@@
expression inode, flags;
@@

- inode->i_state = flags
+ inode_state_assign(inode, flags)

@@
expression inode, flags;
@@

- flags = inode->i_state
+ flags = inode_state_read(inode)

@@
expression inode, flags;
@@

- READ_ONCE(inode->i_state) & flags
+ inode_state_read(inode) & flags

Signed-off-by: Mateusz Guzik <mjguzik@gmail.com>
Signed-off-by: Christian Brauner <brauner@kernel.org>
Merge tag 'fs_for_v6.17-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/jack/linux-fs 2025-07-28T23:16:09+00:00 Linus Torvalds torvalds@linux-foundation.org 2025-07-28T23:16:09+00:00 c7bfaff47a17ec01d9d8b648a7266103cb7a305b Pull udf and ext2 updates from Jan Kara: "A few udf and ext2 fixes and cleanups" * tag 'fs_for_v6.17-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/jack/linux-fs: udf: Verify partition map count udf: stop using write_cache_pages ext2: Handle fiemap on empty files to prevent EINVAL 
Pull udf and ext2 updates from Jan Kara:
 "A few udf and ext2 fixes and cleanups"

* tag 'fs_for_v6.17-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/jack/linux-fs:
  udf: Verify partition map count
  udf: stop using write_cache_pages
  ext2: Handle fiemap on empty files to prevent EINVAL
Merge tag 'vfs-6.17-rc1.fileattr' of git://git.kernel.org/pub/scm/linux/kernel/git/vfs/vfs 2025-07-28T22:24:14+00:00 Linus Torvalds torvalds@linux-foundation.org 2025-07-28T22:24:14+00:00 57fcb7d930d8f00f383e995aeebdcd2b416a187a Pull fileattr updates from Christian Brauner: "This introduces the new file_getattr() and file_setattr() system calls after lengthy discussions. Both system calls serve as successors and extensible companions to the FS_IOC_FSGETXATTR and FS_IOC_FSSETXATTR system calls which have started to show their age in addition to being named in a way that makes it easy to conflate them with extended attribute related operations. These syscalls allow userspace to set filesystem inode attributes on special files. One of the usage examples is the XFS quota projects. XFS has project quotas which could be attached to a directory. All new inodes in these directories inherit project ID set on parent directory. The project is created from userspace by opening and calling FS_IOC_FSSETXATTR on each inode. This is not possible for special files such as FIFO, SOCK, BLK etc. Therefore, some inodes are left with empty project ID. Those inodes then are not shown in the quota accounting but still exist in the directory. This is not critical but in the case when special files are created in the directory with already existing project quota, these new inodes inherit extended attributes. This creates a mix of special files with and without attributes. Moreover, special files with attributes don't have a possibility to become clear or change the attributes. This, in turn, prevents userspace from re-creating quota project on these existing files. In addition, these new system calls allow the implementation of additional attributes that we couldn't or didn't want to fit into the legacy ioctls anymore" * tag 'vfs-6.17-rc1.fileattr' of git://git.kernel.org/pub/scm/linux/kernel/git/vfs/vfs: fs: tighten a sanity check in file_attr_to_fileattr() tree-wide: s/struct fileattr/struct file_kattr/g fs: introduce file_getattr and file_setattr syscalls fs: prepare for extending file_get/setattr() fs: make vfs_fileattr_[get|set] return -EOPNOTSUPP selinux: implement inode_file_[g|s]etattr hooks lsm: introduce new hooks for setting/getting inode fsxattr fs: split fileattr related helpers into separate file 
Pull fileattr updates from Christian Brauner:
 "This introduces the new file_getattr() and file_setattr() system calls
  after lengthy discussions.

  Both system calls serve as successors and extensible companions to
  the FS_IOC_FSGETXATTR and FS_IOC_FSSETXATTR system calls which have
  started to show their age in addition to being named in a way that
  makes it easy to conflate them with extended attribute related
  operations.

  These syscalls allow userspace to set filesystem inode attributes on
  special files. One of the usage examples is the XFS quota projects.

  XFS has project quotas which could be attached to a directory. All new
  inodes in these directories inherit project ID set on parent
  directory.

  The project is created from userspace by opening and calling
  FS_IOC_FSSETXATTR on each inode. This is not possible for special
  files such as FIFO, SOCK, BLK etc. Therefore, some inodes are left
  with empty project ID. Those inodes then are not shown in the quota
  accounting but still exist in the directory. This is not critical but
  in the case when special files are created in the directory with
  already existing project quota, these new inodes inherit extended
  attributes. This creates a mix of special files with and without
  attributes. Moreover, special files with attributes don't have a
  possibility to become clear or change the attributes. This, in turn,
  prevents userspace from re-creating quota project on these existing
  files.

  In addition, these new system calls allow the implementation of
  additional attributes that we couldn't or didn't want to fit into the
  legacy ioctls anymore"

* tag 'vfs-6.17-rc1.fileattr' of git://git.kernel.org/pub/scm/linux/kernel/git/vfs/vfs:
  fs: tighten a sanity check in file_attr_to_fileattr()
  tree-wide: s/struct fileattr/struct file_kattr/g
  fs: introduce file_getattr and file_setattr syscalls
  fs: prepare for extending file_get/setattr()
  fs: make vfs_fileattr_[get|set] return -EOPNOTSUPP
  selinux: implement inode_file_[g|s]etattr hooks
  lsm: introduce new hooks for setting/getting inode fsxattr
  fs: split fileattr related helpers into separate file