linux-stable.git/fs/ext2/inode.c, branch v6.2

Merge tag 'fixes_for_v6.2-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/jack/linux-fs

2022-12-13T04:32:50+00:00

Pull udf and ext2 fixes from Jan Kara:

 - a couple of smaller cleanups and fixes for ext2

 - fixes of a data corruption issues in udf when handling holes and
   preallocation extents

 - fixes and cleanups of several smaller issues in udf

 - add maintainer entry for isofs

* tag 'fixes_for_v6.2-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/jack/linux-fs:
  udf: Fix extending file within last block
  udf: Discard preallocation before extending file with a hole
  udf: Do not bother looking for prealloc extents if i_lenExtents matches i_size
  udf: Fix preallocation discarding at indirect extent boundary
  udf: Increase UDF_MAX_READ_VERSION to 0x0260
  fs/ext2: Fix code indentation
  ext2: unbugger ext2_empty_dir()
  udf: remove ->writepage
  ext2: remove ->writepage
  ext2: Don't flush page immediately for DIRSYNC directories
  ext2: Fix some kernel-doc warnings
  maintainers: Add ISOFS entry
  udf: Avoid double brelse() in udf_rename()
  fs: udf: Optimize udf_free_in_core_inode and udf_find_fileset function

ext2: remove ->writepage

2022-11-21T10:05:01+00:00

->writepage is a very inefficient method to write back data, and only
used through write_cache_pages or as a fallback when no ->migrate_folio
method is present.

Signed-off-by: Christoph Hellwig 
Signed-off-by: Jan Kara

fs: pass dentry to set acl method

2022-10-19T10:55:42+00:00

The current way of setting and getting posix acls through the generic
xattr interface is error prone and type unsafe. The vfs needs to
interpret and fixup posix acls before storing or reporting it to
userspace. Various hacks exist to make this work. The code is hard to
understand and difficult to maintain in it's current form. Instead of
making this work by hacking posix acls through xattr handlers we are
building a dedicated posix acl api around the get and set inode
operations. This removes a lot of hackiness and makes the codepaths
easier to maintain. A lot of background can be found in [1].

Since some filesystem rely on the dentry being available to them when
setting posix acls (e.g., 9p and cifs) they cannot rely on set acl inode
operation. But since ->set_acl() is required in order to use the generic
posix acl xattr handlers filesystems that do not implement this inode
operation cannot use the handler and need to implement their own
dedicated posix acl handlers.

Update the ->set_acl() inode method to take a dentry argument. This
allows all filesystems to rely on ->set_acl().

As far as I can tell all codepaths can be switched to rely on the dentry
instead of just the inode. Note that the original motivation for passing
the dentry separate from the inode instead of just the dentry in the
xattr handlers was because of security modules that call
security_d_instantiate(). This hook is called during
d_instantiate_new(), d_add(), __d_instantiate_anon(), and
d_splice_alias() to initialize the inode's security context and possibly
to set security.* xattrs. Since this only affects security.* xattrs this
is completely irrelevant for posix acls.

Link: https://lore.kernel.org/all/20220801145520.1532837-1-brauner@kernel.org [1]
Reviewed-by: Christoph Hellwig 
Signed-off-by: Christian Brauner (Microsoft)

Merge tag 'folio-6.0' of git://git.infradead.org/users/willy/pagecache

2022-08-03T17:35:43+00:00

Pull folio updates from Matthew Wilcox:

 - Fix an accounting bug that made NR_FILE_DIRTY grow without limit
   when running xfstests

 - Convert more of mpage to use folios

 - Remove add_to_page_cache() and add_to_page_cache_locked()

 - Convert find_get_pages_range() to filemap_get_folios()

 - Improvements to the read_cache_page() family of functions

 - Remove a few unnecessary checks of PageError

 - Some straightforward filesystem conversions to use folios

 - Split PageMovable users out from address_space_operations into
   their own movable_operations

 - Convert aops->migratepage to aops->migrate_folio

 - Remove nobh support (Christoph Hellwig)

* tag 'folio-6.0' of git://git.infradead.org/users/willy/pagecache: (78 commits)
  fs: remove the NULL get_block case in mpage_writepages
  fs: don't call ->writepage from __mpage_writepage
  fs: remove the nobh helpers
  jfs: stop using the nobh helper
  ext2: remove nobh support
  ntfs3: refactor ntfs_writepages
  mm/folio-compat: Remove migration compatibility functions
  fs: Remove aops->migratepage()
  secretmem: Convert to migrate_folio
  hugetlb: Convert to migrate_folio
  aio: Convert to migrate_folio
  f2fs: Convert to filemap_migrate_folio()
  ubifs: Convert to filemap_migrate_folio()
  btrfs: Convert btrfs_migratepage to migrate_folio
  mm/migrate: Add filemap_migrate_folio()
  mm/migrate: Convert migrate_page() to migrate_folio()
  nfs: Convert to migrate_folio
  btrfs: Convert btree_migratepage to migrate_folio
  mm/migrate: Convert expected_page_refs() to folio_expected_refs()
  mm/migrate: Convert buffer_migrate_page() to buffer_migrate_folio()
  ...

ext2: remove nobh support

2022-08-02T16:34:04+00:00

The nobh mode is an obscure feature to save lowlevel for large memory
32-bit configurations while trading for much slower performance and
has been long obsolete.  Remove it.

Signed-off-by: Christoph Hellwig 
Reviewed-by: Jan Kara 
Signed-off-by: Matthew Wilcox (Oracle)

mm/migrate: Convert buffer_migrate_page() to buffer_migrate_folio()

2022-08-02T16:34:03+00:00

Use a folio throughout __buffer_migrate_folio(), add kernel-doc for
buffer_migrate_folio() and buffer_migrate_folio_norefs(), move their
declarations to buffer.h and switch all filesystems that have wired
them up.

Signed-off-by: Matthew Wilcox (Oracle) 
Reviewed-by: Christoph Hellwig

attr: port attribute changes to new types

2022-06-26T16:18:56+00:00

Now that we introduced new infrastructure to increase the type safety
for filesystems supporting idmapped mounts port the first part of the
vfs over to them.

This ports the attribute changes codepaths to rely on the new better
helpers using a dedicated type.

Before this change we used to take a shortcut and place the actual
values that would be written to inode->i_{g,u}id into struct iattr. This
had the advantage that we moved idmappings mostly out of the picture
early on but it made reasoning about changes more difficult than it
should be.

The filesystem was never explicitly told that it dealt with an idmapped
mount. The transition to the value that needed to be stored in
inode->i_{g,u}id appeared way too early and increased the probability of
bugs in various codepaths.

We know place the same value in struct iattr no matter if this is an
idmapped mount or not. The vfs will only deal with type safe
vfs{g,u}id_t. This makes it massively safer to perform permission checks
as the type will tell us what checks we need to perform and what helpers
we need to use.

Fileystems raising FS_ALLOW_IDMAP can't simply write ia_vfs{g,u}id to
inode->i_{g,u}id since they are different types. Instead they need to
use the dedicated vfs{g,u}id_to_k{g,u}id() helpers that map the
vfs{g,u}id into the filesystem.

The other nice effect is that filesystems like overlayfs don't need to
care about idmappings explicitly anymore and can simply set up struct
iattr accordingly directly.

Link: https://lore.kernel.org/lkml/CAHk-=win6+ahs1EwLkcq8apqLi_1wXFWbrPf340zYEhObpz4jA@mail.gmail.com [1]
Link: https://lore.kernel.org/r/20220621141454.2914719-9-brauner@kernel.org
Cc: Seth Forshee 
Cc: Christoph Hellwig 
Cc: Aleksa Sarai 
Cc: Linus Torvalds 
Cc: Al Viro 
CC: linux-fsdevel@vger.kernel.org
Reviewed-by: Seth Forshee 
Signed-off-by: Christian Brauner (Microsoft)

quota: port quota helpers mount ids

2022-06-26T16:18:55+00:00

Port the is_quota_modification() and dqout_transfer() helper to type
safe vfs{g,u}id_t. Since these helpers are only called by a few
filesystems don't introduce a new helper but simply extend the existing
helpers to pass down the mount's idmapping.

Note, that this is a non-functional change, i.e. nothing will have
happened here or at the end of this series to how quota are done! This
a change necessary because we will at the end of this series make
ownership changes easier to reason about by keeping the original value
in struct iattr for both non-idmapped and idmapped mounts.

For now we always pass the initial idmapping which makes the idmapping
functions these helpers call nops.

This is done because we currently always pass the actual value to be
written to i_{g,u}id via struct iattr. While this allowed us to treat
the {g,u}id values in struct iattr as values that can be directly
written to inode->i_{g,u}id it also increases the potential for
confusion for filesystems.

Now that we are have dedicated types to prevent this confusion we will
ultimately only map the value from the idmapped mount into a filesystem
value that can be written to inode->i_{g,u}id when the filesystem
actually updates the inode. So pass down the initial idmapping until we
finished that conversion at which point we pass down the mount's
idmapping.

Since struct iattr uses an anonymous union with overlapping types as
supported by the C standard, filesystems that haven't converted to
ia_vfs{g,u}id won't see any difference and things will continue to work
as before. In other words, no functional changes intended with this
change.

Link: https://lore.kernel.org/r/20220621141454.2914719-7-brauner@kernel.org
Cc: Seth Forshee 
Cc: Christoph Hellwig 
Cc: Jan Kara 
Cc: Aleksa Sarai 
Cc: Linus Torvalds 
Cc: Al Viro 
CC: linux-fsdevel@vger.kernel.org
Reviewed-by: Jan Kara 
Reviewed-by: Seth Forshee 
Signed-off-by: Christian Brauner (Microsoft)

fs: port to iattr ownership update helpers

2022-06-26T16:18:55+00:00

Earlier we introduced new helpers to abstract ownership update and
remove code duplication. This converts all filesystems supporting
idmapped mounts to make use of these new helpers.

For now we always pass the initial idmapping which makes the idmapping
functions these helpers call nops.

This is done because we currently always pass the actual value to be
written to i_{g,u}id via struct iattr. While this allowed us to treat
the {g,u}id values in struct iattr as values that can be directly
written to inode->i_{g,u}id it also increases the potential for
confusion for filesystems.

Now that we are have dedicated types to prevent this confusion we will
ultimately only map the value from the idmapped mount into a filesystem
value that can be written to inode->i_{g,u}id when the filesystem
actually updates the inode. So pass down the initial idmapping until we
finished that conversion at which point we pass down the mount's
idmapping.

No functional changes intended.

Link: https://lore.kernel.org/r/20220621141454.2914719-6-brauner@kernel.org
Cc: Seth Forshee 
Cc: Christoph Hellwig 
Cc: Aleksa Sarai 
Cc: Linus Torvalds 
Cc: Al Viro 
CC: linux-fsdevel@vger.kernel.org
Reviewed-by: Seth Forshee 
Signed-off-by: Christian Brauner (Microsoft)

fs: Fix syntax errors in comments

2022-06-06T07:53:03+00:00

Delete the redundant word 'not'.

Link: https://lore.kernel.org/r/20220605125509.14837-1-wangxiang@cdjrlc.com
Signed-off-by: Xiang wangx 
Signed-off-by: Jan Kara