linux-stable.git/fs/ext2/ext2.h, branch linux-6.4.y

ext2: Drop fragment support

2023-08-11T10:14:25+00:00

commit 404615d7f1dcd4cca200e9a7a9df3a1dcae1dd62 upstream.

Ext2 has fields in superblock reserved for subblock allocation support.
However that never landed. Drop the many years dead code.

Reported-by: syzbot+af5e10f73dbff48f70af@syzkaller.appspotmail.com
Signed-off-by: Jan Kara 
Signed-off-by: Greg Kroah-Hartman

ext2: Check block size validity during mount

2023-03-06T15:42:10+00:00

Check that log of block size stored in the superblock has sensible
value. Otherwise the shift computing the block size can overflow leading
to undefined behavior.

Reported-by: syzbot+4fec412f59eba8c01b77@syzkaller.appspotmail.com
Signed-off-by: Jan Kara

ext2: Correct maximum ext2 filesystem block size

2023-03-06T15:42:10+00:00

Ext2 has traditionally supported filesystem block sizes upto page size
or upto 65536. Macro EXT2_MAX_BLOCK_SIZE is set to 4096, however that is
never used in ext2 so practically we always allowed whatever
sb_set_blocksize() accepted. Fix value of EXT2_MAX_BLOCK_SIZE because it
will be used in the next patch.

Signed-off-by: Jan Kara

Merge tag 'fixes_for_v6.3-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/jack/linux-fs

2023-02-20T20:44:08+00:00

Pull UDF and ext2 fixes from Jan Kara:

 - Rewrite of udf directory iteration code to address multiple syzbot
   reports

 - Fixes to udf extent handling and block mapping code to address
   several syzbot reports and filesystem corruption issues uncovered by
   fsx & fsstress

 - Convert udf to kmap_local()

 - Add sanity checks when loading udf bitmaps

 - Drop old VARCONV support which I've never seen used and which was
   broken for quite some years without anybody noticing

 - Finish conversion of ext2 to kmap_local()

 - One fix to mpage_writepages() on which other udf fixes depend

* tag 'fixes_for_v6.3-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/jack/linux-fs: (78 commits)
  udf: Avoid directory type conversion failure due to ENOMEM
  udf: Use unsigned variables for size calculations
  udf: remove reporting loc in debug output
  udf: Check consistency of Space Bitmap Descriptor
  udf: Fix file counting in LVID
  udf: Limit file size to 4TB
  udf: Don't return bh from udf_expand_dir_adinicb()
  udf: Convert udf_expand_file_adinicb() to avoid kmap_atomic()
  udf: Convert udf_adinicb_writepage() to memcpy_to_page()
  udf: Switch udf_adinicb_readpage() to kmap_local_page()
  udf: Move udf_adinicb_readpage() to inode.c
  udf: Mark aops implementation static
  udf: Switch to single address_space_operations
  udf: Add handling of in-ICB files to udf_bmap()
  udf: Convert all file types to use udf_write_end()
  udf: Convert in-ICB files to use udf_write_begin()
  udf: Convert in-ICB files to use udf_direct_IO()
  udf: Convert in-ICB files to use udf_writepages()
  udf: Unify .read_folio for normal and in-ICB files
  udf: Fix off-by-one error when discarding preallocation
  ...

fs: port ->fileattr_set() to pass mnt_idmap

2023-01-19T08:24:27+00:00

Convert to struct mnt_idmap.

Last cycle we merged the necessary infrastructure in
256c8aed2b42 ("fs: introduce dedicated idmap type for mounts").
This is just the conversion to struct mnt_idmap.

Currently we still pass around the plain namespace that was attached to a
mount. This is in general pretty convenient but it makes it easy to
conflate namespaces that are relevant on the filesystem with namespaces
that are relevent on the mount level. Especially for non-vfs developers
without detailed knowledge in this area this can be a potential source for
bugs.

Once the conversion to struct mnt_idmap is done all helpers down to the
really low-level helpers will take a struct mnt_idmap argument instead of
two namespace arguments. This way it becomes impossible to conflate the two
eliminating the possibility of any bugs. All of the vfs and all filesystems
only operate on struct mnt_idmap.

Acked-by: Dave Chinner 
Reviewed-by: Christoph Hellwig 
Signed-off-by: Christian Brauner (Microsoft)

fs: port ->getattr() to pass mnt_idmap

2023-01-19T08:24:25+00:00

Convert to struct mnt_idmap.

Last cycle we merged the necessary infrastructure in
256c8aed2b42 ("fs: introduce dedicated idmap type for mounts").
This is just the conversion to struct mnt_idmap.

Currently we still pass around the plain namespace that was attached to a
mount. This is in general pretty convenient but it makes it easy to
conflate namespaces that are relevant on the filesystem with namespaces
that are relevent on the mount level. Especially for non-vfs developers
without detailed knowledge in this area this can be a potential source for
bugs.

Once the conversion to struct mnt_idmap is done all helpers down to the
really low-level helpers will take a struct mnt_idmap argument instead of
two namespace arguments. This way it becomes impossible to conflate the two
eliminating the possibility of any bugs. All of the vfs and all filesystems
only operate on struct mnt_idmap.

Acked-by: Dave Chinner 
Reviewed-by: Christoph Hellwig 
Signed-off-by: Christian Brauner (Microsoft)

fs: port ->setattr() to pass mnt_idmap

2023-01-19T08:24:02+00:00

Convert to struct mnt_idmap.

Last cycle we merged the necessary infrastructure in
256c8aed2b42 ("fs: introduce dedicated idmap type for mounts").
This is just the conversion to struct mnt_idmap.

Currently we still pass around the plain namespace that was attached to a
mount. This is in general pretty convenient but it makes it easy to
conflate namespaces that are relevant on the filesystem with namespaces
that are relevent on the mount level. Especially for non-vfs developers
without detailed knowledge in this area this can be a potential source for
bugs.

Once the conversion to struct mnt_idmap is done all helpers down to the
really low-level helpers will take a struct mnt_idmap argument instead of
two namespace arguments. This way it becomes impossible to conflate the two
eliminating the possibility of any bugs. All of the vfs and all filesystems
only operate on struct mnt_idmap.

Acked-by: Dave Chinner 
Reviewed-by: Christoph Hellwig 
Signed-off-by: Christian Brauner (Microsoft)

ext2: propagate errors from ext2_prepare_chunk

2023-01-16T11:19:25+00:00

Propagate errors from ext2_prepare_chunk to the callers and handle them
there.  While touching the prototype also turn update_times into a bool
from the current int used as bool.

[JK: fixed up error recovery path in ext2_rename()]

Signed-off-by: Christoph Hellwig 
Signed-off-by: Jan Kara 
Message-Id: <20230116085205.2342975-1-hch@lst.de>

ext2: remove nobh support

2022-08-02T16:34:04+00:00

The nobh mode is an obscure feature to save lowlevel for large memory
32-bit configurations while trading for much slower performance and
has been long obsolete.  Remove it.

Signed-off-by: Christoph Hellwig 
Reviewed-by: Jan Kara 
Signed-off-by: Matthew Wilcox (Oracle)

dax: return the partition offset from fs_dax_get_by_bdev

2021-12-04T16:58:54+00:00

Prepare for the removal of the block_device from the DAX I/O path by
returning the partition offset from fs_dax_get_by_bdev so that the file
systems have it at hand for use during I/O.

Signed-off-by: Christoph Hellwig 
Reviewed-by: Dan Williams 
Reviewed-by: Darrick J. Wong 
Link: https://lore.kernel.org/r/20211129102203.2243509-26-hch@lst.de
Signed-off-by: Dan Williams