Read the entire size of the buffer, including the trailing new line
character.
Discovered while reading the sched domain names of CPU0:

before:

cat /sys/kernel/debug/sched/domains/cpu0/domain*/name
SMTMCDIE

after:

cat /sys/kernel/debug/sched/domains/cpu0/domain*/name
SMT
MC
DIE

Fixes: 9af0440ec86eb ("debugfs: Implement debugfs_create_str()")
Reviewed-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Signed-off-by: Dietmar Eggemann <dietmar.eggemann@arm.com>
Link: https://lore.kernel.org/r/20210527091105.258457-1-dietmar.eggemann@arm.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Pull scheduler updates from Ingo Molnar:

 - Clean up SCHED_DEBUG: move the decades old mess of sysctl, procfs and
   debugfs interfaces to a unified debugfs interface.

 - Signals: Allow caching one sigqueue object per task, to improve
   performance & latencies.

 - Improve newidle_balance() irq-off latencies on systems with a large
   number of CPU cgroups.

 - Improve energy-aware scheduling

 - Improve the PELT metrics for certain workloads

 - Reintroduce select_idle_smt() to improve load-balancing locality -
   but without the previous regressions

 - Add 'scheduler latency debugging': warn after long periods of pending
   need_resched. This is an opt-in feature that requires the enabling of
   the LATENCY_WARN scheduler feature, or the use of the
   resched_latency_warn_ms=xx boot parameter.

 - CPU hotplug fixes for HP-rollback, and for the 'fail' interface. Fix
   remaining balance_push() vs. hotplug holes/races

 - PSI fixes, plus allow /proc/pressure/ files to be written by
   CAP_SYS_RESOURCE tasks as well

 - Fix/improve various load-balancing corner cases vs. capacity margins

 - Fix sched topology on systems with NUMA diameter of 3 or above

 - Fix PF_KTHREAD vs to_kthread() race

 - Minor rseq optimizations

 - Misc cleanups, optimizations, fixes and smaller updates

* tag 'sched-core-2021-04-28' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (61 commits)
  cpumask/hotplug: Fix cpu_dying() state tracking
  kthread: Fix PF_KTHREAD vs to_kthread() race
  sched/debug: Fix cgroup_path[] serialization
  sched,psi: Handle potential task count underflow bugs more gracefully
  sched: Warn on long periods of pending need_resched
  sched/fair: Move update_nohz_stats() to the CONFIG_NO_HZ_COMMON block to simplify the code & fix an unused function warning
  sched/debug: Rename the sched_debug parameter to sched_verbose
  sched,fair: Alternative sched_slice()
  sched: Move /proc/sched_debug to debugfs
  sched,debug: Convert sysctl sched_domains to debugfs
  debugfs: Implement debugfs_create_str()
  sched,preempt: Move preempt_dynamic to debug.c
  sched: Move SCHED_DEBUG sysctl to debugfs
  sched: Don't make LATENCYTOP select SCHED_DEBUG
  sched: Remove sched_schedstats sysctl out from under SCHED_DEBUG
  sched/numa: Allow runtime enabling/disabling of NUMA balance without SCHED_DEBUG
  sched: Use cpu_dying() to fix balance_push vs hotplug-rollback
  cpumask: Introduce DYING mask
  cpumask: Make cpu_{online,possible,present,active}() inline
  rseq: Optimise rseq_get_rseq_cs() and clear_rseq_cs()
  ...

Implement debugfs_create_str() to easily display names and such in
debugfs.

Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Tested-by: Valentin Schneider <valentin.schneider@arm.com>
Link: https://lkml.kernel.org/r/20210412102001.415407080@infradead.org

simple_read_from_buffer() doesn't care about any bytes in the buffer
beyond "available". Making the buffer nul-terminated is therefore
completely pointless.

Signed-off-by: Rasmus Villemoes <linux@rasmusvillemoes.dk>
Link: https://lore.kernel.org/r/20210326151411.732220-1-linux@rasmusvillemoes.dk
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

No one checks the return value of debugfs_create_devm_seqfile(), as it's
not needed, so make the return value void, so that no one tries to do so
in the future.

Link: https://lore.kernel.org/r/20201023131037.2500765-1-gregkh@linuxfoundation.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

The '#ifdef MODULE' check in the original commit does not work as intended.
The code under the check is not built at all if CONFIG_DEBUG_FS=y. Fix this
by using a correct check.

Fixes: 275678e7a9be ("debugfs: Check module state before warning in {full/open}_proxy_open()")
Signed-off-by: Vladis Dronov <vdronov@redhat.com>
Cc: stable <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/20200811150129.53343-1-vdronov@redhat.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Pull networking updates from David Miller:

 1) Support 6Ghz band in ath11k driver, from Rajkumar Manoharan.

 2) Support UDP segmentation in code TSO code, from Eric Dumazet.

 3) Allow flashing different flash images in cxgb4 driver, from Vishal
    Kulkarni.

 4) Add drop frames counter and flow status to tc flower offloading,
    from Po Liu.

 5) Support n-tuple filters in cxgb4, from Vishal Kulkarni.

 6) Various new indirect call avoidance, from Eric Dumazet and Brian
    Vazquez.

 7) Fix BPF verifier failures on 32-bit pointer arithmetic, from
    Yonghong Song.

 8) Support querying and setting hardware address of a port function via
    devlink, use this in mlx5, from Parav Pandit.

 9) Support hw ipsec offload on bonding slaves, from Jarod Wilson.

10) Switch qca8k driver over to phylink, from Jonathan McDowell.

11) In bpftool, show list of processes holding BPF FD references to
    maps, programs, links, and btf objects. From Andrii Nakryiko.

12) Several conversions over to generic power management, from Vaibhav
    Gupta.

13) Add support for SO_KEEPALIVE et al. to bpf_setsockopt(), from Dmitry
    Yakunin.

14) Various https url conversions, from Alexander A. Klimov.

15) Timestamping and PHC support for mscc PHY driver, from Antoine
    Tenart.

16) Support bpf iterating over tcp and udp sockets, from Yonghong Song.

17) Support 5GBASE-T i40e NICs, from Aleksandr Loktionov.

18) Add kTLS RX HW offload support to mlx5e, from Tariq Toukan.

19) Fix the ->ndo_start_xmit() return type to be netdev_tx_t in several
    drivers. From Luc Van Oostenryck.

20) XDP support for xen-netfront, from Denis Kirjanov.

21) Support receive buffer autotuning in MPTCP, from Florian Westphal.

22) Support EF100 chip in sfc driver, from Edward Cree.

23) Add XDP support to mvpp2 driver, from Matteo Croce.

24) Support MPTCP in sock_diag, from Paolo Abeni.

25) Commonize UDP tunnel offloading code by creating udp_tunnel_nic
    infrastructure, from Jakub Kicinski.

26) Several pci_ --> dma_ API conversions, from Christophe JAILLET.

27) Add FLOW_ACTION_POLICE support to mlxsw, from Ido Schimmel.

28) Add SK_LOOKUP bpf program type, from Jakub Sitnicki.

29) Refactor a lot of networking socket option handling code in order to
    avoid set_fs() calls, from Christoph Hellwig.

30) Add rfc4884 support to icmp code, from Willem de Bruijn.

31) Support TBF offload in dpaa2-eth driver, from Ioana Ciornei.

32) Support XDP_REDIRECT in qede driver, from Alexander Lobakin.

33) Support PCI relaxed ordering in mlx5 driver, from Aya Levin.

34) Support TCP syncookies in MPTCP, from Flowian Westphal.

35) Fix several tricky cases of PMTU handling wrt. briding, from Stefano
    Brivio.

* git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (2056 commits)
  net: thunderx: initialize VF's mailbox mutex before first usage
  usb: hso: remove bogus check for EINPROGRESS
  usb: hso: no complaint about kmalloc failure
  hso: fix bailout in error case of probe
  ip_tunnel_core: Fix build for archs without _HAVE_ARCH_IPV6_CSUM
  selftests/net: relax cpu affinity requirement in msg_zerocopy test
  mptcp: be careful on subflow creation
  selftests: rtnetlink: make kci_test_encap() return sub-test result
  selftests: rtnetlink: correct the final return value for the test
  net: dsa: sja1105: use detected device id instead of DT one on mismatch
  tipc: set ub->ifindex for local ipv6 address
  ipv6: add ipv6_dev_find()
  net: openvswitch: silence suspicious RCU usage warning
  Revert "vxlan: fix tos value before xmit"
  ptp: only allow phase values lower than 1 period
  farsync: switch from 'pci_' to 'dma_' API
  wan: wanxl: switch from 'pci_' to 'dma_' API
  hv_netvsc: do not use VF device if link is down
  dpaa2-eth: Fix passing zero to 'PTR_ERR' warning
  net: macb: Properly handle phylink on at91sam9x
  ...

debugfs_create_u32_array() allocates a small structure to wrap
the data and size information about the array. If users ever
try to remove the file this leads to a leak since nothing ever
frees this wrapper.

That said there are no upstream users of debugfs_create_u32_array()
that'd remove a u32 array file (we only have one u32 array user in
CMA), so there is no real bug here.

Make callers pass a wrapper they allocated. This way the lifetime
management of the wrapper is on the caller, and we can avoid the
potential leak in debugfs.

CC: Chucheng Luo <luochucheng@vivo.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: David S. Miller <davem@davemloft.net>

Remove unnecassary casts in the argument to kfree.

Signed-off-by: Xu Wang <vulab@iscas.ac.cn>
Link: https://lore.kernel.org/r/20200709054033.30148-1-vulab@iscas.ac.cn
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

No one checks the return value of debugfs_create_u32(), as it's not
needed, so make the return value void, so that no one tries to do so in
the future.

Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Link: https://lore.kernel.org/r/20200416145448.GA1380878@kroah.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>