linux-stable.git/fs/ceph/addr.c, branch linux-3.10.y

ceph: Avoid data inconsistency due to d-cache aliasing in readpage()

2014-01-09T20:24:22+00:00

commit 56f91aad69444d650237295f68c195b74d888d95 upstream.

If the length of data to be read in readpage() is exactly
PAGE_CACHE_SIZE, the original code does not flush d-cache
for data consistency after finishing reading. This patches fixes
this.

Signed-off-by: Li Wang 
Signed-off-by: Sage Weil 
Signed-off-by: Greg Kroah-Hartman

libceph: kill off osd data write_request parameters

2013-05-02T04:18:58+00:00

In the incremental move toward supporting distinct data items in an
osd request some of the functions had "write_request" parameters to
indicate, basically, whether the data belonged to in_data or the
out_data.  Now that we maintain the data fields in the op structure
there is no need to indicate the direction, so get rid of the
"write_request" parameters.

Signed-off-by: Alex Elder 
Reviewed-by: Josh Durgin

ceph: fix race between writepages and truncate

2013-05-02T04:18:55+00:00

ceph_writepages_start() reads inode->i_size in two places. It can get
different values between successive read, because truncate can change
inode->i_size at any time. The race can lead to mismatch between data
length of osd request and pages marked as writeback. When osd request
finishes, it clear writeback page according to its data length. So
some pages can be left in writeback state forever. The fix is only
read inode->i_size once, save its value to a local variable and use
the local variable when i_size is needed.

Signed-off-by: Yan, Zheng 
Reviewed-by: Alex Elder

libceph: combine initializing and setting osd data

2013-05-02T04:18:23+00:00

This ends up being a rather large patch but what it's doing is
somewhat straightforward.

Basically, this is replacing two calls with one.  The first of the
two calls is initializing a struct ceph_osd_data with data (either a
page array, a page list, or a bio list); the second is setting an
osd request op so it associates that data with one of the op's
parameters.  In place of those two will be a single function that
initializes the op directly.

That means we sort of fan out a set of the needed functions:
    - extent ops with pages data
    - extent ops with pagelist data
    - extent ops with bio list data
and
    - class ops with page data for receiving a response

We also have define another one, but it's only used internally:
    - class ops with pagelist data for request parameters

Note that we *still* haven't gotten rid of the osd request's
r_data_in and r_data_out fields.  All the osd ops refer to them for
their data.  For now, these data fields are pointers assigned to the
appropriate r_data_* field when these new functions are called.

Signed-off-by: Alex Elder 
Reviewed-by: Josh Durgin

libceph: specify osd op by index in request

2013-05-02T04:18:15+00:00

An osd request now holds all of its source op structures, and every
place that initializes one of these is in fact initializing one
of the entries in the the osd request's array.

So rather than supplying the address of the op to initialize, have
caller specify the osd request and an indication of which op it
would like to initialize.  This better hides the details the
op structure (and faciltates moving the data pointers they use).

Since osd_req_op_init() is a common routine, and it's not used
outside the osd client code, give it static scope.  Also make
it return the address of the specified op (so all the other
init routines don't have to repeat that code).

Signed-off-by: Alex Elder 
Reviewed-by: Josh Durgin

libceph: add data pointers in osd op structures

2013-05-02T04:18:14+00:00

An extent type osd operation currently implies that there will
be corresponding data supplied in the data portion of the request
(for write) or response (for read) message.  Similarly, an osd class
method operation implies a data item will be supplied to receive
the response data from the operation.

Add a ceph_osd_data pointer to each of those structures, and assign
it to point to eithre the incoming or the outgoing data structure in
the osd message.  The data is not always available when an op is
initially set up, so add two new functions to allow setting them
after the op has been initialized.

Begin to make use of the data item pointer available in the osd
operation rather than the request data in or out structure in
places where it's convenient.  Add some assertions to verify
pointers are always set the way they're expected to be.

This is a sort of stepping stone toward really moving the data
into the osd request ops, to allow for some validation before
making that jump.

This is the first in a series of patches that resolve:
    http://tracker.ceph.com/issues/4657

Signed-off-by: Alex Elder 
Reviewed-by: Josh Durgin

libceph: keep source rather than message osd op array

2013-05-02T04:18:12+00:00

An osd request keeps a pointer to the osd operations (ops) array
that it builds in its request message.

In order to allow each op in the array to have its own distinct
data, we will need to keep track of each op's data, and that
information does not go over the wire.

As long as we're tracking the data we might as well just track the
entire (source) op definition for each of the ops.  And if we're
doing that, we'll have no more need to keep a pointer to the
wire-encoded version.

This patch makes the array of source ops be kept with the osd
request structure, and uses that instead of the version encoded in
the message in places where that was previously used.  The array
will be embedded in the request structure, and the maximum number of
ops we ever actually use is currently 2.  So reduce CEPH_OSD_MAX_OP
to 2 to reduce the size of the structure.

The result of doing this sort of ripples back up, and as a result
various function parameters and local variables become unnecessary.

Make r_num_ops be unsigned, and move the definition of struct
ceph_osd_req_op earlier to ensure it's defined where needed.

It does not yet add per-op data, that's coming soon.

This resolves:
    http://tracker.ceph.com/issues/4656

Signed-off-by: Alex Elder 
Reviewed-by: Josh Durgin

libceph: a few more osd data cleanups

2013-05-02T04:18:10+00:00

These are very small changes that make use osd_data local pointers
as shorthands for structures being operated on.

Signed-off-by: Alex Elder 
Reviewed-by: Josh Durgin

libceph: define osd data initialization helpers

2013-05-02T04:18:06+00:00

Define and use functions that encapsulate the initializion of a
ceph_osd_data structure.

Signed-off-by: Alex Elder 
Reviewed-by: Josh Durgin

ceph: build osd request message later for writepages

2013-05-02T04:18:02+00:00

Hold off building the osd request message in ceph_writepages_start()
until just before it will be submitted to the osd client for
execution.

We'll still create the request and allocate the page pointer array
after we learn we have at least one page to write.  A local variable
will be used to keep track of the allocated array of pages.  Wait
until just before submitting the request for assigning that page
array pointer to the request message.

Create ands use a new function osd_req_op_extent_update() whose
purpose is to serve this one spot where the length value supplied
when an osd request's op was initially formatted might need to get
changed (reduced, never increased) before submitting the request.

Previously, ceph_writepages_start() assigned the message header's
data length because of this update.  That's no longer necessary,
because ceph_osdc_build_request() will recalculate the right
value to use based on the content of the ops in the request.

Signed-off-by: Alex Elder 
Reviewed-by: Josh Durgin