linux-stable.git/fs/attr.c, branch v6.2

attr: use consistent sgid stripping checks

2022-10-18T08:09:47+00:00

Currently setgid stripping in file_remove_privs()'s should_remove_suid()
helper is inconsistent with other parts of the vfs. Specifically, it only
raises ATTR_KILL_SGID if the inode is S_ISGID and S_IXGRP but not if the
inode isn't in the caller's groups and the caller isn't privileged over the
inode although we require this already in setattr_prepare() and
setattr_copy() and so all filesystem implement this requirement implicitly
because they have to use setattr_{prepare,copy}() anyway.

But the inconsistency shows up in setgid stripping bugs for overlayfs in
xfstests (e.g., generic/673, generic/683, generic/685, generic/686,
generic/687). For example, we test whether suid and setgid stripping works
correctly when performing various write-like operations as an unprivileged
user (fallocate, reflink, write, etc.):

echo "Test 1 - qa_user, non-exec file $verb"
setup_testfile
chmod a+rws $junk_file
commit_and_check "$qa_user" "$verb" 64k 64k

The test basically creates a file with 6666 permissions. While the file has
the S_ISUID and S_ISGID bits set it does not have the S_IXGRP set. On a
regular filesystem like xfs what will happen is:

sys_fallocate()
-> vfs_fallocate()
   -> xfs_file_fallocate()
      -> file_modified()
         -> __file_remove_privs()
            -> dentry_needs_remove_privs()
               -> should_remove_suid()
            -> __remove_privs()
               newattrs.ia_valid = ATTR_FORCE | kill;
               -> notify_change()
                  -> setattr_copy()

In should_remove_suid() we can see that ATTR_KILL_SUID is raised
unconditionally because the file in the test has S_ISUID set.

But we also see that ATTR_KILL_SGID won't be set because while the file
is S_ISGID it is not S_IXGRP (see above) which is a condition for
ATTR_KILL_SGID being raised.

So by the time we call notify_change() we have attr->ia_valid set to
ATTR_KILL_SUID | ATTR_FORCE. Now notify_change() sees that
ATTR_KILL_SUID is set and does:

ia_valid = attr->ia_valid |= ATTR_MODE
attr->ia_mode = (inode->i_mode & ~S_ISUID);

which means that when we call setattr_copy() later we will definitely
update inode->i_mode. Note that attr->ia_mode still contains S_ISGID.

Now we call into the filesystem's ->setattr() inode operation which will
end up calling setattr_copy(). Since ATTR_MODE is set we will hit:

if (ia_valid & ATTR_MODE) {
        umode_t mode = attr->ia_mode;
        vfsgid_t vfsgid = i_gid_into_vfsgid(mnt_userns, inode);
        if (!vfsgid_in_group_p(vfsgid) &&
            !capable_wrt_inode_uidgid(mnt_userns, inode, CAP_FSETID))
                mode &= ~S_ISGID;
        inode->i_mode = mode;
}

and since the caller in the test is neither capable nor in the group of the
inode the S_ISGID bit is stripped.

But assume the file isn't suid then ATTR_KILL_SUID won't be raised which
has the consequence that neither the setgid nor the suid bits are stripped
even though it should be stripped because the inode isn't in the caller's
groups and the caller isn't privileged over the inode.

If overlayfs is in the mix things become a bit more complicated and the bug
shows up more clearly. When e.g., ovl_setattr() is hit from
ovl_fallocate()'s call to file_remove_privs() then ATTR_KILL_SUID and
ATTR_KILL_SGID might be raised but because the check in notify_change() is
questioning the ATTR_KILL_SGID flag again by requiring S_IXGRP for it to be
stripped the S_ISGID bit isn't removed even though it should be stripped:

sys_fallocate()
-> vfs_fallocate()
   -> ovl_fallocate()
      -> file_remove_privs()
         -> dentry_needs_remove_privs()
            -> should_remove_suid()
         -> __remove_privs()
            newattrs.ia_valid = ATTR_FORCE | kill;
            -> notify_change()
               -> ovl_setattr()
                  // TAKE ON MOUNTER'S CREDS
                  -> ovl_do_notify_change()
                     -> notify_change()
                  // GIVE UP MOUNTER'S CREDS
     // TAKE ON MOUNTER'S CREDS
     -> vfs_fallocate()
        -> xfs_file_fallocate()
           -> file_modified()
              -> __file_remove_privs()
                 -> dentry_needs_remove_privs()
                    -> should_remove_suid()
                 -> __remove_privs()
                    newattrs.ia_valid = attr_force | kill;
                    -> notify_change()

The fix for all of this is to make file_remove_privs()'s
should_remove_suid() helper to perform the same checks as we already
require in setattr_prepare() and setattr_copy() and have notify_change()
not pointlessly requiring S_IXGRP again. It doesn't make any sense in the
first place because the caller must calculate the flags via
should_remove_suid() anyway which would raise ATTR_KILL_SGID.

While we're at it we move should_remove_suid() from inode.c to attr.c
where it belongs with the rest of the iattr helpers. Especially since it
returns ATTR_KILL_S{G,U}ID flags. We also rename it to
setattr_should_drop_suidgid() to better reflect that it indicates both
setuid and setgid bit removal and also that it returns attr flags.

Running xfstests with this doesn't report any regressions. We should really
try and use consistent checks.

Reviewed-by: Amir Goldstein 
Signed-off-by: Christian Brauner (Microsoft)

attr: add setattr_should_drop_sgid()

2022-10-18T08:09:47+00:00

The current setgid stripping logic during write and ownership change
operations is inconsistent and strewn over multiple places. In order to
consolidate it and make more consistent we'll add a new helper
setattr_should_drop_sgid(). The function retains the old behavior where
we remove the S_ISGID bit unconditionally when S_IXGRP is set but also
when it isn't set and the caller is neither in the group of the inode
nor privileged over the inode.

We will use this helper both in write operation permission removal such
as file_remove_privs() as well as in ownership change operations.

Reviewed-by: Amir Goldstein 
Signed-off-by: Christian Brauner (Microsoft)

fs: move should_remove_suid()

2022-10-18T08:09:46+00:00

Move the helper from inode.c to attr.c. This keeps the the core of the
set{g,u}id stripping logic in one place when we add follow-up changes.
It is the better place anyway, since should_remove_suid() returns
ATTR_KILL_S{G,U}ID flags.

Reviewed-by: Amir Goldstein 
Signed-off-by: Christian Brauner (Microsoft)

attr: add in_group_or_capable()

2022-10-18T08:09:43+00:00

In setattr_{copy,prepare}() we need to perform the same permission
checks to determine whether we need to drop the setgid bit or not.
Instead of open-coding it twice add a simple helper the encapsulates the
logic. We will reuse this helpers to make dropping the setgid bit during
write operations more consistent in a follow up patch.

Reviewed-by: Amir Goldstein 
Signed-off-by: Christian Brauner (Microsoft)

vfs: Check the truncate maximum size in inode_newsize_ok()

2022-08-08T17:39:29+00:00

If something manages to set the maximum file size to MAX_OFFSET+1, this
can cause the xfs and ext4 filesystems at least to become corrupt.

Ordinarily, the kernel protects against userspace trying this by
checking the value early in the truncate() and ftruncate() system calls
calls - but there are at least two places that this check is bypassed:

 (1) Cachefiles will round up the EOF of the backing file to DIO block
     size so as to allow DIO on the final block - but this might push
     the offset negative. It then calls notify_change(), but this
     inadvertently bypasses the checking. This can be triggered if
     someone puts an 8EiB-1 file on a server for someone else to try and
     access by, say, nfs.

 (2) ksmbd doesn't check the value it is given in set_end_of_file_info()
     and then calls vfs_truncate() directly - which also bypasses the
     check.

In both cases, it is potentially possible for a network filesystem to
cause a disk filesystem to be corrupted: cachefiles in the client's
cache filesystem; ksmbd in the server's filesystem.

nfsd is okay as it checks the value, but we can then remove this check
too.

Fix this by adding a check to inode_newsize_ok(), as called from
setattr_prepare(), thereby catching the issue as filesystems set up to
perform the truncate with minimal opportunity for bypassing the new
check.

Fixes: 1f08c925e7a3 ("cachefiles: Implement backing file wrangling")
Fixes: f44158485826 ("cifsd: add file operations")
Signed-off-by: David Howells 
Reported-by: Jeff Layton 
Tested-by: Jeff Layton 
Reviewed-by: Namjae Jeon 
Cc: stable@kernel.org
Acked-by: Alexander Viro 
cc: Steve French 
cc: Hyunchul Lee 
cc: Chuck Lever 
cc: Dave Wysochanski 
Signed-off-by: Linus Torvalds

attr: fix kernel doc

2022-06-27T14:08:31+00:00

When building kernel documentation new warnings were generated because
the name in the parameter documentation didn't match the parameter name.

Signed-off-by: Christian Brauner (Microsoft)

attr: port attribute changes to new types

2022-06-26T16:18:56+00:00

Now that we introduced new infrastructure to increase the type safety
for filesystems supporting idmapped mounts port the first part of the
vfs over to them.

This ports the attribute changes codepaths to rely on the new better
helpers using a dedicated type.

Before this change we used to take a shortcut and place the actual
values that would be written to inode->i_{g,u}id into struct iattr. This
had the advantage that we moved idmappings mostly out of the picture
early on but it made reasoning about changes more difficult than it
should be.

The filesystem was never explicitly told that it dealt with an idmapped
mount. The transition to the value that needed to be stored in
inode->i_{g,u}id appeared way too early and increased the probability of
bugs in various codepaths.

We know place the same value in struct iattr no matter if this is an
idmapped mount or not. The vfs will only deal with type safe
vfs{g,u}id_t. This makes it massively safer to perform permission checks
as the type will tell us what checks we need to perform and what helpers
we need to use.

Fileystems raising FS_ALLOW_IDMAP can't simply write ia_vfs{g,u}id to
inode->i_{g,u}id since they are different types. Instead they need to
use the dedicated vfs{g,u}id_to_k{g,u}id() helpers that map the
vfs{g,u}id into the filesystem.

The other nice effect is that filesystems like overlayfs don't need to
care about idmappings explicitly anymore and can simply set up struct
iattr accordingly directly.

Link: https://lore.kernel.org/lkml/CAHk-=win6+ahs1EwLkcq8apqLi_1wXFWbrPf340zYEhObpz4jA@mail.gmail.com [1]
Link: https://lore.kernel.org/r/20220621141454.2914719-9-brauner@kernel.org
Cc: Seth Forshee 
Cc: Christoph Hellwig 
Cc: Aleksa Sarai 
Cc: Linus Torvalds 
Cc: Al Viro 
CC: linux-fsdevel@vger.kernel.org
Reviewed-by: Seth Forshee 
Signed-off-by: Christian Brauner (Microsoft)

security: pass down mount idmapping to setattr hook

2022-06-26T16:18:56+00:00

Before this change we used to take a shortcut and place the actual
values that would be written to inode->i_{g,u}id into struct iattr. This
had the advantage that we moved idmappings mostly out of the picture
early on but it made reasoning about changes more difficult than it
should be.

The filesystem was never explicitly told that it dealt with an idmapped
mount. The transition to the value that needed to be stored in
inode->i_{g,u}id appeared way too early and increased the probability of
bugs in various codepaths.

We know place the same value in struct iattr no matter if this is an
idmapped mount or not. The vfs will only deal with type safe
vfs{g,u}id_t. This makes it massively safer to perform permission checks
as the type will tell us what checks we need to perform and what helpers
we need to use.

Adapt the security_inode_setattr() helper to pass down the mount's
idmapping to account for that change.

Link: https://lore.kernel.org/r/20220621141454.2914719-8-brauner@kernel.org
Cc: Seth Forshee 
Cc: Christoph Hellwig 
Cc: Aleksa Sarai 
Cc: Linus Torvalds 
Cc: Al Viro 
CC: linux-fsdevel@vger.kernel.org
Reviewed-by: Seth Forshee 
Signed-off-by: Christian Brauner (Microsoft)

fs: port to iattr ownership update helpers

2022-06-26T16:18:55+00:00

Earlier we introduced new helpers to abstract ownership update and
remove code duplication. This converts all filesystems supporting
idmapped mounts to make use of these new helpers.

For now we always pass the initial idmapping which makes the idmapping
functions these helpers call nops.

This is done because we currently always pass the actual value to be
written to i_{g,u}id via struct iattr. While this allowed us to treat
the {g,u}id values in struct iattr as values that can be directly
written to inode->i_{g,u}id it also increases the potential for
confusion for filesystems.

Now that we are have dedicated types to prevent this confusion we will
ultimately only map the value from the idmapped mount into a filesystem
value that can be written to inode->i_{g,u}id when the filesystem
actually updates the inode. So pass down the initial idmapping until we
finished that conversion at which point we pass down the mount's
idmapping.

No functional changes intended.

Link: https://lore.kernel.org/r/20220621141454.2914719-6-brauner@kernel.org
Cc: Seth Forshee 
Cc: Christoph Hellwig 
Cc: Aleksa Sarai 
Cc: Linus Torvalds 
Cc: Al Viro 
CC: linux-fsdevel@vger.kernel.org
Reviewed-by: Seth Forshee 
Signed-off-by: Christian Brauner (Microsoft)

fs: account for group membership

2022-06-14T10:18:47+00:00

When calling setattr_prepare() to determine the validity of the
attributes the ia_{g,u}id fields contain the value that will be written
to inode->i_{g,u}id. This is exactly the same for idmapped and
non-idmapped mounts and allows callers to pass in the values they want
to see written to inode->i_{g,u}id.

When group ownership is changed a caller whose fsuid owns the inode can
change the group of the inode to any group they are a member of. When
searching through the caller's groups we need to use the gid mapped
according to the idmapped mount otherwise we will fail to change
ownership for unprivileged users.

Consider a caller running with fsuid and fsgid 1000 using an idmapped
mount that maps id 65534 to 1000 and 65535 to 1001. Consequently, a file
owned by 65534:65535 in the filesystem will be owned by 1000:1001 in the
idmapped mount.

The caller now requests the gid of the file to be changed to 1000 going
through the idmapped mount. In the vfs we will immediately map the
requested gid to the value that will need to be written to inode->i_gid
and place it in attr->ia_gid. Since this idmapped mount maps 65534 to
1000 we place 65534 in attr->ia_gid.

When we check whether the caller is allowed to change group ownership we
first validate that their fsuid matches the inode's uid. The
inode->i_uid is 65534 which is mapped to uid 1000 in the idmapped mount.
Since the caller's fsuid is 1000 we pass the check.

We now check whether the caller is allowed to change inode->i_gid to the
requested gid by calling in_group_p(). This will compare the passed in
gid to the caller's fsgid and search the caller's additional groups.

Since we're dealing with an idmapped mount we need to pass in the gid
mapped according to the idmapped mount. This is akin to checking whether
a caller is privileged over the future group the inode is owned by. And
that needs to take the idmapped mount into account. Note, all helpers
are nops without idmapped mounts.

New regression test sent to xfstests.

Link: https://github.com/lxc/lxd/issues/10537
Link: https://lore.kernel.org/r/20220613111517.2186646-1-brauner@kernel.org
Fixes: 2f221d6f7b88 ("attr: handle idmapped mounts")
Cc: Seth Forshee 
Cc: Christoph Hellwig 
Cc: Aleksa Sarai 
Cc: Al Viro 
Cc: stable@vger.kernel.org # 5.15+
CC: linux-fsdevel@vger.kernel.org
Reviewed-by: Seth Forshee 
Signed-off-by: Christian Brauner (Microsoft)