Pull timer fixes from Borislav Petkov:

 - Detect a broken EL2 virtual timer in the bcm2712 SoC boards (RPi5)
   and fallback to the physical one instead

 - Fix a build error with ARM rpc_defconfig and function tracer enabled

* tag 'timers_urgent_for_v7.2' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  clocksource/drivers/arm_arch_timer: Workaround bcm2712 broken EL2 virtual timer
  tick: Include ktime.h and jiffies.h in linux/tick.h

Split mt7921_mcu_regd_update() into two functions to prevent recursive
mutex acquisition. Introduce __mt7921_mcu_regd_update() as the internal
implementation that assumes the mutex is already held by the caller,
while mt7921_mcu_regd_update() remains as the external interface that
handles mutex acquisition and release.

This fixes a deadlock issue when mt7921_regd_set_6ghz_power_type() is
called with the device mutex already held. Without this change, calling
mt7921_mcu_regd_update() would attempt to acquire the same mutex again,
causing a recursive lock deadlock.

The __mt7921_mcu_regd_update() function can be safely called when the
caller has already acquired the device mutex, avoiding the deadlock
while maintaining proper synchronization for regulatory domain updates.

Fixes: dc2608cf5224 ("wifi: mt76: mt7921: refactor regulatory notifier flow")
Signed-off-by: Charlie-cy Wu <Charlie-cy.Wu@mediatek.com>
Tested-by: Mikhail Gavrilov <mikhail.v.gavrilov@gmail.com>
Tested-by: Devin Wittmayer <lucid_duck@justthetip.ca>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

This reverts commit 0a4bb2abc3e56d7be6e69b050c88ba52c87e22bf.

This was reported to break the touchpad on at least some Thinkpads, and
while the revert has hit the i2c tree, it hasn't hit mine.  So I'm
reverting it directly just to have this resolved for the imminent 7.2
release.

Reported-by: Thorsten Leemhuis <linux@leemhuis.info>
Link: https://lore.kernel.org/all/b4a4eadb-282f-464c-843a-19d415a34d0c@leemhuis.info/
Cc: Mario Limonciello <mario.limonciello@amd.com>
CC: Hardik Prakash <hardikprakash.official@gmail.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Pull block fix from Jens Axboe:
 "A single fix for a regression in this cycle, where drbd would leak
  shared secrets over netlink. This restores the behavior to match
  what we had before"

* tag 'block-7.2-20260815' of git://git.kernel.org/pub/scm/linux/kernel/git/axboe/linux:
  drbd: don't leak the shared secret to unprivileged netlink dumps

The conversion to explicit netlink serialization dropped the
exclude_sensitive parameter from net_conf_to_skb(), so each caller has
to sanitize by hand. Two dump paths were missed:
drbd_nl_get_connections_dumpit() and the volume-less connection branch
of get_one_status(). Neither op carries GENL_ADMIN_PERM, so any
unprivileged local user could read the CRAM-HMAC secret.

Add a net_conf_to_skb_sanitized() wrapper and route all three callers
through it.

Fixes: 8098eeb693c4 ("drbd: replace genl_magic with explicit netlink serialization")
Reported-by: Vivek Parikh <vivek.parikh@breachx.ai>
Signed-off-by: Christoph Böhmwalder <christoph.boehmwalder@linbit.com>
Link: https://patch.msgid.link/20260814151617.73752-1-christoph.boehmwalder@linbit.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>

Pull SoC fixes from Arnd Bergmann:
 "These are three last-minute fixes for the 7.2 release, though nothing
  alarming:

   - one error handling fix for optee firmware

   - incorrect i2c data for the apple M3 that was added in 7.2

   - a boot time warning fix for nvidia tegra"

* tag 'soc-fixes-7.2-3' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc:
  arm64: tegra: Add EL2 virtual timer interrupt for Tegra194
  arm64: dts: apple: t8122: Fix I2C resources
  optee: ffa: Add NULL check in optee_ffa_lend_protmem

Pull input fixes from Dmitry Torokhov:

 - A couple of fixes to the sur40 touchscreen driver to correct
   registration and teardown ordering, and to fix error path
   unwinding when video device registration fails.

* tag 'input-for-v7.2-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input:
  Input: sur40 - fix V4L error path cleanup
  Input: sur40 - fix input device registration ordering

Pull drm fixes from Dave Airlie:
 "While this is large for rc8 time but also AI driven fixes is a lot of
  it, we had a more traditional screw up, and a regression was just
  found in the fair scheduling patches that went in back in rc1. This
  reverts the fair scheduler back to an option and sets the default back
  to what it should have been. We might have been a bit overly zealous
  in switching over, but at least it feels more normal than the AI
  driven fixes.

  Apart from the scheduler, it's mostly amdgpu and xe fixes, with some
  misc fixes to the log code and connector code.

  scheduler:
   - revert fair scheduler patches due to regression
   - mark fair as experimental

  connector:
   - fix OOB read in hdmi audio infoframe

  log:
   - fix divide by 0 if module param is set to 0
   - fix OOB read on empty message
   - fix infinite loop for too large scale

  xe:
   - Fix DPT Allocation paths
   - Fixes around UM queue BO
   - Order ring writes before ring tail updates
   - Add termination on resume for PXP
   - Document Sentinel and make CTX_TIMESTAMP read TOCTOU-safe
   - Fix sync entry leak on OA config emit failure
   - Check managed mutex initilization errors
   - Fix min frequency setting
   - Fix xe_device_probe error path

  amdgpu:
   - Bounds checking fix in CS IOCTL
   - Bounds checking fix in GEM IOCTL
   - Display fixes
   - GPUVM fix
   - ASPM fix
   - UVD bounds checking fixes
   - VCE 3 fix
   - BT.2020 fixes
   - NBIF 6.3.1 fix
   - IP discovery fix

  radeon:
   - Runtime pm fix

  amdxdna:
   - skip attempting to populate unmapped pages"

* tag 'drm-fixes-2026-08-15' of https://gitlab.freedesktop.org/drm/kernel: (51 commits)
  drm/log: Fix infinite loop when scale is too large for display
  drm/log: Fix out-of-bounds read on empty message length
  drm/log: Fix division by zero when scale module parameter is 0
  drm/xe: Fix xe_device_probe() failure
  drm/xe: Fix a bug in pc_adjust_freq_bounds()
  drm/xe/oa: Check managed mutex initialization errors
  drm/xe/oa: Fix sync entry leak on OA config emit failure
  drm/xe/lrc: document sentinel and make CTX_TIMESTAMP read TOCTOU-safe
  drm/xe/pxp: add termination on resume
  drm/xe: Order ring writes before ring tail updates
  drm/xe/guc_ads: use uncached mapping for UM queue BO
  drm/xe/guc_ads: allocate UM queues in VRAM on dGFX
  drm/xe/guc_ads: allocate UM queues in a separate BO
  drm/xe: Fix DPT allocation paths.
  accel/amdxdna: Skip unmapped range in aie2_populate_range()
  drm/amdgpu: Prefer default discovery offset
  drm/amdgpu: Reject UVD message with invalid number of h265 refs
  drm/amdgpu: fix nbif 6.3.1 l1 low power not functional
  drm/amd/display: fix BT.2020 YCbCr output CSC matrices for DCE
  drm/amd/display: fix BT.2020 YCbCr limited output CSC matrix
  ...

Pull clk fixes from Stephen Boyd:
 "Fixes for the Qualcomm, Rockchip, and SpacemiT clk drivers:

   - Keep audio working on Rockchip rk3588 by skipping disabling unused
     clks

   - Fix SpacemiT USB2 clk data so they actually work and keep the HDMA
     bus clk enabled to avoid system hangs

   - Avoid clk hangs on Qualcomm Eliza display hardware and revert a
     patch that breaks PCIe on some Qualcomm platforms"

* tag 'clk-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux:
  dt-bindings: clock: Replace bouncing emails
  Revert "clk: qcom: regmap-phy-mux: Rework the implementation"
  clk: spacemit: k3: set hdma clock as critical
  clk: spacemit: k3: fix USB2 bus clock
  clk: qcom: dispcc-eliza: Fix disp_cc_mdss_mdp_clk_src RCG stall on Eliza EVK
  clk: rockchip: rk3588: don't disable unused I2S MCLK output gates

Pull spi fixes from Mark Brown:
 "A couple of relatively minor (but as ever important if you're hitting
  them) and straightforward driver specific fixes, plus one new device
  ID documented in the DT bindings for the DesignWare controller"

* tag 'spi-fix-v7.2-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/spi:
  spi: virtio: mark device ready before registering the controller
  spi: dw: fix wrong RX_SAMPLE_DLY setting after resume
  spi: dt-bindings: snps,dw-apb-ssi: Document Axiado AX3005