linux-stable.git/drivers, branch v7.1.9 Linux kernel stable tree thunderbolt: Fix bandwidth group reservation indexing 2026-08-19T16:20:32+00:00 Xu Rao raoxu@uniontech.com 2026-06-24T06:27:03+00:00 0a8c9ed4f166216642a8c084f0de415169c88088 commit d2ee4d47aacbd2ba456092eeec670dba35fde291 upstream. Valid bandwidth group IDs range from 1 through MAX_GROUPS, while Group ID 0 is reserved. tb_consumed_dp_bandwidth() uses the Group ID directly to index its local group_reserved[] array. The array currently has MAX_GROUPS entries, so its valid indices are 0 through MAX_GROUPS - 1. Group ID MAX_GROUPS therefore accesses one element past the end, and the final group's reserved bandwidth is not included when the array is summed. Give group_reserved[] MAX_GROUPS + 1 entries so direct Group ID indexing covers the reserved ID 0 and valid IDs 1 through MAX_GROUPS. Fixes: 52a4490e89d7 ("thunderbolt: Reserve released DisplayPort bandwidth for a group for 10 seconds") Cc: stable@vger.kernel.org Signed-off-by: Xu Rao <raoxu@uniontech.com> Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> 
commit d2ee4d47aacbd2ba456092eeec670dba35fde291 upstream.

Valid bandwidth group IDs range from 1 through MAX_GROUPS, while Group
ID 0 is reserved. tb_consumed_dp_bandwidth() uses the Group ID directly
to index its local group_reserved[] array.

The array currently has MAX_GROUPS entries, so its valid indices are 0
through MAX_GROUPS - 1. Group ID MAX_GROUPS therefore accesses one
element past the end, and the final group's reserved bandwidth is not
included when the array is summed.

Give group_reserved[] MAX_GROUPS + 1 entries so direct Group ID
indexing covers the reserved ID 0 and valid IDs 1 through MAX_GROUPS.

Fixes: 52a4490e89d7 ("thunderbolt: Reserve released DisplayPort bandwidth for a group for 10 seconds")
Cc: stable@vger.kernel.org
Signed-off-by: Xu Rao <raoxu@uniontech.com>
Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
thunderbolt: Bound the DROM dual link port number before indexing sw->ports 2026-08-19T16:20:32+00:00 Bryam Vargas hexlabsecurity@proton.me 2026-06-25T11:54:09+00:00 f32c3a9a77cfb50934a60b05d5407649af062535 commit d6764992f17b23d91ff93ce905ab53c2aa7191f0 upstream. tb_drom_parse_entry_port() validates the device-supplied header->index against sw->config.max_port_number before indexing sw->ports[], but the sibling field entry->dual_link_port_nr -- a 6-bit value also read from the DROM -- indexes the same array with no such check. A malicious or malformed Thunderbolt device can set dual_link_port_nr beyond the allocated sw->ports[] (max_port_number + 1 entries), producing an out-of-bounds tb_port pointer that is stored and later dereferenced. Reject a port entry whose dual_link_port_nr exceeds max_port_number, the same bound already applied to header->index. Fixes: cd22e73bdf5e ("thunderbolt: Read port configuration from eeprom.") Cc: stable@vger.kernel.org Signed-off-by: Bryam Vargas <hexlabsecurity@proton.me> Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> 
commit d6764992f17b23d91ff93ce905ab53c2aa7191f0 upstream.

tb_drom_parse_entry_port() validates the device-supplied header->index
against sw->config.max_port_number before indexing sw->ports[], but the
sibling field entry->dual_link_port_nr -- a 6-bit value also read from
the DROM -- indexes the same array with no such check. A malicious or
malformed Thunderbolt device can set dual_link_port_nr beyond the
allocated sw->ports[] (max_port_number + 1 entries), producing an
out-of-bounds tb_port pointer that is stored and later dereferenced.

Reject a port entry whose dual_link_port_nr exceeds max_port_number,
the same bound already applied to header->index.

Fixes: cd22e73bdf5e ("thunderbolt: Read port configuration from eeprom.")
Cc: stable@vger.kernel.org
Signed-off-by: Bryam Vargas <hexlabsecurity@proton.me>
Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
scsi: scsi_debug: Negate wrapped memcmp() result 2026-08-19T16:20:31+00:00 Xu Rao raoxu@uniontech.com 2026-08-03T09:53:28+00:00 65a740633570e3c69070301f02ed9c9c3a1972a1 commit c4f6916a99cf105c3ff340b6210fcbba3fa66b35 upstream. comp_write_worker() returns true when the compared data matches. memcmp() returns zero for equal data and non-zero for different data, so its result must be negated before it is stored in a bool. The first segment already uses !memcmp(), but the wrapped segment uses memcmp() directly, reversing the match result. Use !memcmp() there as well. Fixes: 38d5c8336e60 ("scsi_debug: add Report supported opcodes+tmfs; Compare and write") Cc: stable@vger.kernel.org Signed-off-by: Xu Rao <raoxu@uniontech.com> Reviewed-by: John Garry <john.g.garry@oracle.com> Link: https://patch.msgid.link/E5AD42E9C0E18633+20260803095328.3445311-1-raoxu@uniontech.com Signed-off-by: Martin K. Petersen (Oracle) <mkp@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> 
commit c4f6916a99cf105c3ff340b6210fcbba3fa66b35 upstream.

comp_write_worker() returns true when the compared data matches.
memcmp() returns zero for equal data and non-zero for different data, so
its result must be negated before it is stored in a bool.

The first segment already uses !memcmp(), but the wrapped segment uses
memcmp() directly, reversing the match result. Use !memcmp() there as
well.

Fixes: 38d5c8336e60 ("scsi_debug: add Report supported opcodes+tmfs; Compare and write")
Cc: stable@vger.kernel.org
Signed-off-by: Xu Rao <raoxu@uniontech.com>
Reviewed-by: John Garry <john.g.garry@oracle.com>
Link: https://patch.msgid.link/E5AD42E9C0E18633+20260803095328.3445311-1-raoxu@uniontech.com
Signed-off-by: Martin K. Petersen (Oracle) <mkp@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
ptp: ocp: Fix board ID over-read 2026-08-19T16:20:30+00:00 Ahmad Byagowi ahmadexp@gmail.com 2026-08-04T21:07:51+00:00 f8d7e5751267637190eff887c971d5b468106213 commit 6b69f2ef10cdb018c0b127a7cab88e590bbddba4 upstream. The EEPROM board ID is a fixed 13-byte field and is not guaranteed to contain a NUL terminator. Passing it directly to devlink_info_version_fixed_put() treats it as a C string and may read beyond the field. Format at most OCP_BOARD_ID_LEN bytes into the existing local buffer before reporting the ID. Use a precision limit because the snprintf() output size alone does not bound the source string scan. Fixes: 0cfcdd1ebcfe ("ptp: ocp: add nvmem interface for accessing eeprom") Cc: stable@vger.kernel.org Signed-off-by: Ahmad Byagowi <ahmadexp@gmail.com> Reviewed-by: Vadim Fedorenko <vadim.fedorenko@linux.dev> Link: https://patch.msgid.link/20260804210751.48248-1-ahmadexp@gmail.com Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> 
commit 6b69f2ef10cdb018c0b127a7cab88e590bbddba4 upstream.

The EEPROM board ID is a fixed 13-byte field and is not guaranteed to
contain a NUL terminator. Passing it directly to
devlink_info_version_fixed_put() treats it as a C string and may read
beyond the field.

Format at most OCP_BOARD_ID_LEN bytes into the existing local buffer
before reporting the ID. Use a precision limit because the snprintf()
output size alone does not bound the source string scan.

Fixes: 0cfcdd1ebcfe ("ptp: ocp: add nvmem interface for accessing eeprom")
Cc: stable@vger.kernel.org
Signed-off-by: Ahmad Byagowi <ahmadexp@gmail.com>
Reviewed-by: Vadim Fedorenko <vadim.fedorenko@linux.dev>
Link: https://patch.msgid.link/20260804210751.48248-1-ahmadexp@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Revert "thermal: hwmon: Register a hwmon device for each thermal zone" 2026-08-19T16:20:30+00:00 Rafael J. Wysocki rafael.j.wysocki@intel.com 2026-07-31T13:01:15+00:00 2004172036eca94b37ca3f666e22f4fa73869c74 commit f93d951ce0d02b5dca01c0c72add411fb17849bb upstream. Revert commit d6323469bcfb ("thermal: hwmon: Register a hwmon device for each thermal zone") that changed the names of hwmon class devices associated with thermal zones and their sysfs layout which made user space unhappy. Closes: https://lore.kernel.org/linux-pm/cafd8af9-c6e9-4bf2-b496-23e796fbc9a6@linux.dev/ Closes: https://lore.kernel.org/linux-hwmon/ab8b093b-46e6-4738-afcf-4b97c9ad5af9@googlemail.com/ Cc: stable@vger.kernel.org Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> Link: https://patch.msgid.link/2301040.irdbgypaU6@rafael.j.wysocki Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> 
commit f93d951ce0d02b5dca01c0c72add411fb17849bb upstream.

Revert commit d6323469bcfb ("thermal: hwmon: Register a hwmon device
for each thermal zone") that changed the names of hwmon class devices
associated with thermal zones and their sysfs layout which made user
space unhappy.

Closes: https://lore.kernel.org/linux-pm/cafd8af9-c6e9-4bf2-b496-23e796fbc9a6@linux.dev/
Closes: https://lore.kernel.org/linux-hwmon/ab8b093b-46e6-4738-afcf-4b97c9ad5af9@googlemail.com/
Cc: stable@vger.kernel.org
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Link: https://patch.msgid.link/2301040.irdbgypaU6@rafael.j.wysocki
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Revert "thermal/drivers/hwmon: Cleanup coding style a bit" 2026-08-19T16:20:30+00:00 Rafael J. Wysocki rafael.j.wysocki@intel.com 2026-08-04T20:09:10+00:00 6b446d335ba16e93a266dd77adf1ba51abc82df4 commit ff8da20b6f47c48d46e47f93f7a59e2d56ee9107 upstream. Revert commit 030a48b0f6ce ("thermal/drivers/hwmon: Cleanup coding style a bit") that introduced a use-after-free into the error path of thermal_add_hwmon_sysfs() by removing a valid check from it. Link: https://lore.kernel.org/linux-hwmon/20260803183915.4ED7D1F000E9@smtp.kernel.org/ Cc: All applicable <stable@vger.kernel.org> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> Reviewed-by: Lukasz Luba <lukasz.luba@arm.com> Link: https://patch.msgid.link/5123895.31r3eYUQgx@rafael.j.wysocki Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> 
commit ff8da20b6f47c48d46e47f93f7a59e2d56ee9107 upstream.

Revert commit 030a48b0f6ce ("thermal/drivers/hwmon: Cleanup coding style
a bit") that introduced a use-after-free into the error path of
thermal_add_hwmon_sysfs() by removing a valid check from it.

Link: https://lore.kernel.org/linux-hwmon/20260803183915.4ED7D1F000E9@smtp.kernel.org/
Cc: All applicable <stable@vger.kernel.org>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Reviewed-by: Lukasz Luba <lukasz.luba@arm.com>
Link: https://patch.msgid.link/5123895.31r3eYUQgx@rafael.j.wysocki
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
vhost: reset the vring metadata cache on vring reconfiguration 2026-08-19T16:20:29+00:00 Jun Yang junvyyang@tencent.com 2026-08-03T01:45:14+00:00 b70ebe0bba254e093dd5fd4c0c170941ce83eb85 commit de845981da67a6b049080c87e605130b0c30adc5 upstream. vq->meta_iotlb[] caches the vhost_iotlb_map that backs each vring metadata region, and iotlb_access_ok() returns early on a cache hit, taking the hit as proof that the region has already been validated: if (vhost_vq_meta_fetch(vq, addr, len, type)) return true; The cache is reset on VHOST_IOTLB_UPDATE and VHOST_IOTLB_INVALIDATE, on device IOTLB (re)initialisation and on vq reset, but not when VHOST_SET_VRING_ADDR replaces vq->desc, vq->avail and vq->used, nor when VHOST_SET_VRING_NUM changes the region sizes. With a device IOTLB attached both ioctls are accepted while the vq is live, and neither validates the addresses at ioctl time: vq_access_ok() and vq_log_used_access_ok() return true early because the addresses are GIOVAs, deferring validation to prefetch time. Once the cache has been populated that deferred validation no longer runs -- vq_meta_prefetch() hits the stale entry and returns true -- and vhost_vq_meta_fetch() keeps translating through the old mapping as map->addr + addr - map->start for an address the mapping no longer covers. vhost_copy_to_user() and vhost_copy_from_user() consume the result with __copy_to_user() and __copy_from_user(), which do not check it either, so a subsequent used ring update or descriptor fetch accesses memory outside the region the IOTLB actually maps. Reset the metadata cache whenever the vring is reconfigured, so the new addresses are pushed back through iotlb_access_ok()'s slow path. Fixes: f88949138058 ("vhost: introduce O(1) vq metadata cache") Cc: stable@vger.kernel.org Assisted-by: tencentos-corvus-ai:kimi-k3 Signed-off-by: Jun Yang <junvyyang@tencent.com> Message-ID: <20260803014823.68623-1-juny24602@gmail.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> 
commit de845981da67a6b049080c87e605130b0c30adc5 upstream.

vq->meta_iotlb[] caches the vhost_iotlb_map that backs each vring
metadata region, and iotlb_access_ok() returns early on a cache hit,
taking the hit as proof that the region has already been validated:

	if (vhost_vq_meta_fetch(vq, addr, len, type))
		return true;

The cache is reset on VHOST_IOTLB_UPDATE and VHOST_IOTLB_INVALIDATE, on
device IOTLB (re)initialisation and on vq reset, but not when
VHOST_SET_VRING_ADDR replaces vq->desc, vq->avail and vq->used, nor when
VHOST_SET_VRING_NUM changes the region sizes.

With a device IOTLB attached both ioctls are accepted while the vq is
live, and neither validates the addresses at ioctl time: vq_access_ok()
and vq_log_used_access_ok() return true early because the addresses are
GIOVAs, deferring validation to prefetch time.  Once the cache has been
populated that deferred validation no longer runs -- vq_meta_prefetch()
hits the stale entry and returns true -- and vhost_vq_meta_fetch() keeps
translating through the old mapping as

	map->addr + addr - map->start

for an address the mapping no longer covers.  vhost_copy_to_user() and
vhost_copy_from_user() consume the result with __copy_to_user() and
__copy_from_user(), which do not check it either, so a subsequent used
ring update or descriptor fetch accesses memory outside the region the
IOTLB actually maps.

Reset the metadata cache whenever the vring is reconfigured, so the new
addresses are pushed back through iotlb_access_ok()'s slow path.

Fixes: f88949138058 ("vhost: introduce O(1) vq metadata cache")
Cc: stable@vger.kernel.org
Assisted-by: tencentos-corvus-ai:kimi-k3
Signed-off-by: Jun Yang <junvyyang@tencent.com>
Message-ID: <20260803014823.68623-1-juny24602@gmail.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
veth: fix skb length accounting after XDP frag adjustment 2026-08-19T16:20:29+00:00 Sun Jian sun.jian.kdev@gmail.com 2026-08-04T05:40:39+00:00 3205b0652a37255dbb7ca8f3d942c8d8aa677c21 commit cb6379feaaff11c4e1e79c26c745ffa23182768a upstream. veth exposes non-linear skb fragments through an xdp_buff. If an XDP program adjusts the fragment area, veth_xdp_rcv_skb() copies xdp_frags_size back to skb->data_len but leaves skb->len containing the old fragment contribution. After a fragment shrink, this makes skb_headlen() larger than the actual linear area. In the reproduced UDP receive path, __skb_datagram_iter() copied 1024 bytes past the actual linear tail to userspace, starting at struct skb_shared_info. The copied bytes included the affected skb's nr_frags, xdp_frags_size, and a kernel pointer from skb_shinfo(skb)->frags[0]. Real packet data was displaced by the same amount and truncated at the end. Subtract the old data_len before replacing it and add the new data_len afterwards, keeping skb->len and skb->data_len synchronized. Additionally, bpf_xdp_pull_data() can advance data_end while leaving frags present. The skb is then still non-linear, so the old __skb_put(skb, off) triggers SKB_LINEAR_ASSERT(). Use skb_set_tail_pointer() and update skb->len explicitly instead, following bpf_prog_run_generic_xdp(). Unlike __skb_put(), skb_set_tail_pointer() does not require a linear skb. A 60000-byte UDP datagram on a veth pair with MTU 64000 was shortened by 1024 bytes from its fragment area. Before the fix, all 10 runs produced corrupted payloads. After the fix, all 10 runs matched the expected payload exactly. A forced-tailroom reproducer also exercises bpf_xdp_pull_data() with frags still present; the old code triggers SKB_LINEAR_ASSERT(), while this fix passes 10/10 runs. Fixes: 718a18a0c8a6 ("veth: Rework veth_xdp_rcv_skb in order to accept non-linear skb") Cc: stable@vger.kernel.org Reported-by: Mohsin Bashir <mohsin.bashr@gmail.com> Link: https://lore.kernel.org/bpf/80687d9c-9c27-494c-b3f2-efd0230b1895@gmail.com/ Suggested-by: Lorenzo Bianconi <lorenzo@kernel.org> Acked-by: Lorenzo Bianconi <lorenzo@kernel.org> Signed-off-by: Sun Jian <sun.jian.kdev@gmail.com> Link: https://patch.msgid.link/20260804054040.613675-3-sun.jian.kdev@gmail.com Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> 
commit cb6379feaaff11c4e1e79c26c745ffa23182768a upstream.

veth exposes non-linear skb fragments through an xdp_buff. If an XDP
program adjusts the fragment area, veth_xdp_rcv_skb() copies
xdp_frags_size back to skb->data_len but leaves skb->len containing the
old fragment contribution.

After a fragment shrink, this makes skb_headlen() larger than the actual
linear area. In the reproduced UDP receive path, __skb_datagram_iter()
copied 1024 bytes past the actual linear tail to userspace, starting at
struct skb_shared_info. The copied bytes included the affected skb's
nr_frags, xdp_frags_size, and a kernel pointer from
skb_shinfo(skb)->frags[0]. Real packet data was displaced by the same
amount and truncated at the end.

Subtract the old data_len before replacing it and add the new data_len
afterwards, keeping skb->len and skb->data_len synchronized.

Additionally, bpf_xdp_pull_data() can advance data_end while leaving
frags present. The skb is then still non-linear, so the old
__skb_put(skb, off) triggers SKB_LINEAR_ASSERT().

Use skb_set_tail_pointer() and update skb->len explicitly instead,
following bpf_prog_run_generic_xdp(). Unlike __skb_put(),
skb_set_tail_pointer() does not require a linear skb.

A 60000-byte UDP datagram on a veth pair with MTU 64000 was shortened by
1024 bytes from its fragment area. Before the fix, all 10 runs produced
corrupted payloads. After the fix, all 10 runs matched the expected
payload exactly. A forced-tailroom reproducer also exercises
bpf_xdp_pull_data() with frags still present; the old code triggers
SKB_LINEAR_ASSERT(), while this fix passes 10/10 runs.

Fixes: 718a18a0c8a6 ("veth: Rework veth_xdp_rcv_skb in order to accept non-linear skb")
Cc: stable@vger.kernel.org
Reported-by: Mohsin Bashir <mohsin.bashr@gmail.com>
Link: https://lore.kernel.org/bpf/80687d9c-9c27-494c-b3f2-efd0230b1895@gmail.com/
Suggested-by: Lorenzo Bianconi <lorenzo@kernel.org>
Acked-by: Lorenzo Bianconi <lorenzo@kernel.org>
Signed-off-by: Sun Jian <sun.jian.kdev@gmail.com>
Link: https://patch.msgid.link/20260804054040.613675-3-sun.jian.kdev@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
vxlan: do not arm the ageing timer on a device that is down 2026-08-19T16:20:29+00:00 Baul Lee baul.lee@xbow.com 2026-08-09T11:18:29+00:00 6b4119af544996a545cf84b16f1dbce829ba0de8 commit b37971686ec59fb027fa4910ba16805e68fddb97 upstream. vxlan_changelink() arms vxlan->age_timer whenever the requested ageing interval differs from the configured one: if (conf.age_interval != vxlan->cfg.age_interval) mod_timer(&vxlan->age_timer, jiffies); There is no netif_running() test, so the timer is armed even on a device that was never brought up. The only synchronous cancel in the driver is the timer_delete_sync() in vxlan_stop(), which is .ndo_stop. netif_close_many() drops devices without IFF_UP before __dev_close_many() runs, so that cancel is skipped for such a device. vxlan_setup() sets dev->needs_free_netdev = true and age_timer is a member of struct vxlan_dev, so free_netdev() releases the allocation the timer lives in while it is still queued on a timer_base. expire_timers() unlinks the entry before it loads timer->function, so the timer core writes through the freed object's list pointers: BUG: KASAN: slab-use-after-free in __run_timers+0x208/0x654 Write of size 8 at addr ffff00001adace68 by task true/192 __asan_store8+0x84/0xac __run_timers+0x208/0x654 run_timer_softirq+0x154/0x18c Allocated by task 189: alloc_netdev_mqs+0x64/0x720 rtnl_create_link+0x4ac/0x520 rtnl_newlink+0x758/0xd00 Freed by task 191: netdev_release+0x40/0x58 netdev_run_todo+0x4a4/0x8c0 rtnl_dellink+0x200/0x4e8 The rtnl operations involved are netns-scoped, so an unprivileged user can perform them in a new user and network namespace. Arming the timer on a down device never had an effect: vxlan_cleanup() returns early on !netif_running(), and vxlan_open() arms the timer for any non-zero interval once the device is brought up. Add the missing test. Discovered by XBOW, triaged by Baul Lee <baul.lee@xbow.com> Fixes: 40051c4dcad5 ("vxlan: Allow changing ageing time") Cc: stable@vger.kernel.org Signed-off-by: Baul Lee <baul.lee@xbow.com> Reviewed-by: Ido Schimmel <idosch@nvidia.com> Link: https://patch.msgid.link/20260809111829.78834-1-baul.lee@xbow.com Signed-off-by: Paolo Abeni <pabeni@redhat.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> 
commit b37971686ec59fb027fa4910ba16805e68fddb97 upstream.

vxlan_changelink() arms vxlan->age_timer whenever the requested ageing
interval differs from the configured one:

	if (conf.age_interval != vxlan->cfg.age_interval)
		mod_timer(&vxlan->age_timer, jiffies);

There is no netif_running() test, so the timer is armed even on a device
that was never brought up.  The only synchronous cancel in the driver is
the timer_delete_sync() in vxlan_stop(), which is .ndo_stop.
netif_close_many() drops devices without IFF_UP before
__dev_close_many() runs, so that cancel is skipped for such a device.

vxlan_setup() sets dev->needs_free_netdev = true and age_timer is a
member of struct vxlan_dev, so free_netdev() releases the allocation the
timer lives in while it is still queued on a timer_base.
expire_timers() unlinks the entry before it loads timer->function, so
the timer core writes through the freed object's list pointers:

  BUG: KASAN: slab-use-after-free in __run_timers+0x208/0x654
  Write of size 8 at addr ffff00001adace68 by task true/192
   __asan_store8+0x84/0xac
   __run_timers+0x208/0x654
   run_timer_softirq+0x154/0x18c
  Allocated by task 189:
   alloc_netdev_mqs+0x64/0x720
   rtnl_create_link+0x4ac/0x520
   rtnl_newlink+0x758/0xd00
  Freed by task 191:
   netdev_release+0x40/0x58
   netdev_run_todo+0x4a4/0x8c0
   rtnl_dellink+0x200/0x4e8

The rtnl operations involved are netns-scoped, so an unprivileged user
can perform them in a new user and network namespace.

Arming the timer on a down device never had an effect: vxlan_cleanup()
returns early on !netif_running(), and vxlan_open() arms the timer for
any non-zero interval once the device is brought up.  Add the missing
test.

Discovered by XBOW, triaged by Baul Lee <baul.lee@xbow.com>

Fixes: 40051c4dcad5 ("vxlan: Allow changing ageing time")
Cc: stable@vger.kernel.org
Signed-off-by: Baul Lee <baul.lee@xbow.com>
Reviewed-by: Ido Schimmel <idosch@nvidia.com>
Link: https://patch.msgid.link/20260809111829.78834-1-baul.lee@xbow.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
dibs: initialise dibs->lock in dibs_dev_alloc() 2026-08-19T16:20:29+00:00 Hidayath Khan hidayath@linux.ibm.com 2026-07-30T12:42:27+00:00 2926031acba100d0c18fcfaa7a2ed29609318848 commit c27e360545373b7aee9862a5beef3b9fb3df0c25 upstream. dibs->lock is initialised by dibs_dev_add(), but a dibs device can already take interrupts before that call: ism_probe() runs ism_dev_init(), and hence request_irq(), before it calls dibs_dev_add(). No client can have registered a dmb at that point, so no dmb interrupt can occur, but a GID event interrupt can, and ism_handle_irq() takes dibs->lock unconditionally on entry, before it inspects anything else. Initialise the lock in dibs_dev_alloc() instead, so that it is valid as soon as a driver can publish the device to its interrupt handler. Fixes: cc21191b584c ("dibs: Move data path to dibs layer") Cc: stable@vger.kernel.org Reviewed-by: Alexandra Winter <wintera@linux.ibm.com> Signed-off-by: Hidayath Khan <hidayath@linux.ibm.com> Link: https://patch.msgid.link/20260730124227.167829-1-hidayath@linux.ibm.com Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> 
commit c27e360545373b7aee9862a5beef3b9fb3df0c25 upstream.

dibs->lock is initialised by dibs_dev_add(), but a dibs device can
already take interrupts before that call: ism_probe() runs
ism_dev_init(), and hence request_irq(), before it calls
dibs_dev_add(). No client can have registered a dmb at that point, so
no dmb interrupt can occur, but a GID event interrupt can, and
ism_handle_irq() takes dibs->lock unconditionally on entry, before it
inspects anything else.

Initialise the lock in dibs_dev_alloc() instead, so that it is valid as
soon as a driver can publish the device to its interrupt handler.

Fixes: cc21191b584c ("dibs: Move data path to dibs layer")
Cc: stable@vger.kernel.org
Reviewed-by: Alexandra Winter <wintera@linux.ibm.com>
Signed-off-by: Hidayath Khan <hidayath@linux.ibm.com>
Link: https://patch.msgid.link/20260730124227.167829-1-hidayath@linux.ibm.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>