linux-stable.git/drivers, branch v6.7.5

net: stmmac: xgmac: fix a typo of register name in DPP safety handling

2024-02-16T18:14:32+00:00

commit 1ce2654d87e2fb91fea83b288bd9b2641045e42a upstream.

DDPP is copied from Synopsys Data book:

DDPP: Disable Data path Parity Protection.
    When it is 0x0, Data path Parity Protection is enabled.
    When it is 0x1, Data path Parity Protection is disabled.

The macro name should be XGMAC_DPP_DISABLE.

Fixes: 46eba193d04f ("net: stmmac: xgmac: fix handling of DPP safety error for DMA channels")
Signed-off-by: Furong Xu <0x1207@gmail.com>
Reviewed-by: Serge Semin 
Link: https://lore.kernel.org/r/20240203053133.1129236-1-0x1207@gmail.com
Signed-off-by: Paolo Abeni 
Signed-off-by: Greg Kroah-Hartman

net: stmmac: xgmac: use #define for string constants

2024-02-16T18:14:32+00:00

commit 1692b9775e745f84b69dc8ad0075b0855a43db4e upstream.

The cited commit introduces and uses the string constants dpp_tx_err and
dpp_rx_err. These are assigned to constant fields of the array
dwxgmac3_error_desc.

It has been reported that on GCC 6 and 7.5.0 this results in warnings
such as:

  .../dwxgmac2_core.c:836:20: error: initialiser element is not constant
   { true, "TDPES0", dpp_tx_err },

I have been able to reproduce this using: GCC 7.5.0, 8.4.0, 9.4.0 and 10.5.0.
But not GCC 13.2.0.

So it seems this effects older compilers but not newer ones.
As Jon points out in his report, the minimum compiler supported by
the kernel is GCC 5.1, so it does seem that this ought to be fixed.

It is not clear to me what combination of 'const', if any, would address
this problem.  So this patch takes of using #defines for the string
constants

Compile tested only.

Fixes: 46eba193d04f ("net: stmmac: xgmac: fix handling of DPP safety error for DMA channels")
Reported-by: Jon Hunter 
Closes: https://lore.kernel.org/netdev/c25eb595-8d91-40ea-9f52-efa15ebafdbc@nvidia.com/
Reported-by: kernel test robot 
Closes: https://lore.kernel.org/oe-kbuild-all/202402081135.lAxxBXHk-lkp@intel.com/
Signed-off-by: Simon Horman 
Link: https://lore.kernel.org/r/20240208-xgmac-const-v1-1-e69a1eeabfc8@kernel.org
Signed-off-by: Jakub Kicinski 
Signed-off-by: Greg Kroah-Hartman

PCI/ASPM: Fix deadlock when enabling ASPM

2024-02-16T18:14:30+00:00

commit 1e560864159d002b453da42bd2c13a1805515a20 upstream.

A last minute revert in 6.7-final introduced a potential deadlock when
enabling ASPM during probe of Qualcomm PCIe controllers as reported by
lockdep:

  ============================================
  WARNING: possible recursive locking detected
  6.7.0 #40 Not tainted
  --------------------------------------------
  kworker/u16:5/90 is trying to acquire lock:
  ffffacfa78ced000 (pci_bus_sem){++++}-{3:3}, at: pcie_aspm_pm_state_change+0x58/0xdc

              but task is already holding lock:
  ffffacfa78ced000 (pci_bus_sem){++++}-{3:3}, at: pci_walk_bus+0x34/0xbc

              other info that might help us debug this:
   Possible unsafe locking scenario:

         CPU0
         ----
    lock(pci_bus_sem);
    lock(pci_bus_sem);

               *** DEADLOCK ***

  Call trace:
   print_deadlock_bug+0x25c/0x348
   __lock_acquire+0x10a4/0x2064
   lock_acquire+0x1e8/0x318
   down_read+0x60/0x184
   pcie_aspm_pm_state_change+0x58/0xdc
   pci_set_full_power_state+0xa8/0x114
   pci_set_power_state+0xc4/0x120
   qcom_pcie_enable_aspm+0x1c/0x3c [pcie_qcom]
   pci_walk_bus+0x64/0xbc
   qcom_pcie_host_post_init_2_7_0+0x28/0x34 [pcie_qcom]

The deadlock can easily be reproduced on machines like the Lenovo ThinkPad
X13s by adding a delay to increase the race window during asynchronous
probe where another thread can take a write lock.

Add a new pci_set_power_state_locked() and associated helper functions that
can be called with the PCI bus semaphore held to avoid taking the read lock
twice.

Link: https://lore.kernel.org/r/ZZu0qx2cmn7IwTyQ@hovoldconsulting.com
Link: https://lore.kernel.org/r/20240130100243.11011-1-johan+linaro@kernel.org
Fixes: f93e71aea6c6 ("Revert "PCI/ASPM: Remove pcie_aspm_pm_state_change()"")
Signed-off-by: Johan Hovold 
Signed-off-by: Bjorn Helgaas 
Cc: 	# 6.7
Signed-off-by: Greg Kroah-Hartman

wifi: iwlwifi: mvm: fix a battery life regression

2024-02-16T18:14:29+00:00

commit 1fa942f31665ea5dc5d4d95893dd13723eaa97cc upstream.

Fix the DBG_CONFIG_TOKEN to not enable debug components that would
prevent the device to save power.

Fixes: fc2fe0a5e856 ("wifi: iwlwifi: fw: disable firmware debug asserts")
Cc: stable@vger.kernel.org
Signed-off-by: Emmanuel Grumbach 
Reviewed-by: Eilon Rinat 
Reviewed-by: Gregory Greenman 
Signed-off-by: Miri Korenblit 
Link: https://msgid.link/20240128084842.90d2600edc27.Id657ea2f0ddb131f5f9d0ac39aeb8c88754fe54b@changeid
Signed-off-by: Johannes Berg 
Signed-off-by: Greg Kroah-Hartman

Input: atkbd - skip ATKBD_CMD_SETLEDS when skipping ATKBD_CMD_GETID

2024-02-16T18:14:29+00:00

commit 683cd8259a9b883a51973511f860976db2550a6e upstream.

After commit 936e4d49ecbc ("Input: atkbd - skip ATKBD_CMD_GETID in
translated mode") the keyboard on Dell XPS 13 9350 / 9360 / 9370 models
has stopped working after a suspend/resume.

The problem appears to be that atkbd_probe() fails when called
from atkbd_reconnect() on resume, which on systems where
ATKBD_CMD_GETID is skipped can only happen by ATKBD_CMD_SETLEDS
failing. ATKBD_CMD_SETLEDS failing because ATKBD_CMD_GETID was
skipped is weird, but apparently that is what is happening.

Fix this by also skipping ATKBD_CMD_SETLEDS when skipping
ATKBD_CMD_GETID.

Fixes: 936e4d49ecbc ("Input: atkbd - skip ATKBD_CMD_GETID in translated mode")
Reported-by: Paul Menzel 
Closes: https://lore.kernel.org/linux-input/0aa4a61f-c939-46fe-a572-08022e8931c7@molgen.mpg.de/
Closes: https://bbs.archlinux.org/viewtopic.php?pid=2146300
Closes: https://bugzilla.kernel.org/show_bug.cgi?id=218424
Closes: https://bugzilla.redhat.com/show_bug.cgi?id=2260517
Tested-by: Paul Menzel 
Cc: stable@vger.kernel.org
Signed-off-by: Hans de Goede 
Link: https://lore.kernel.org/r/20240126160724.13278-2-hdegoede@redhat.com
Signed-off-by: Dmitry Torokhov 
Signed-off-by: Greg Kroah-Hartman

Input: i8042 - fix strange behavior of touchpad on Clevo NS70PU

2024-02-16T18:14:29+00:00

commit a60e6c3918d20848906ffcdfcf72ca6a8cfbcf2e upstream.

When closing the laptop lid with an external screen connected, the mouse
pointer has a constant movement to the lower right corner. Opening the
lid again stops this movement, but after that the touchpad does no longer
register clicks.

The touchpad is connected both via i2c-hid and PS/2, the predecessor of
this device (NS70MU) has the same layout in this regard and also strange
behaviour caused by the psmouse and the i2c-hid driver fighting over
touchpad control. This fix is reusing the same workaround by just
disabling the PS/2 aux port, that is only used by the touchpad, to give the
i2c-hid driver the lone control over the touchpad.

v2: Rebased on current master

Signed-off-by: Werner Sembach 
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/r/20231205163602.16106-1-wse@tuxedocomputers.com
Signed-off-by: Dmitry Torokhov 
Signed-off-by: Greg Kroah-Hartman

usb: dwc3: pci: add support for the Intel Arrow Lake-H

2024-02-16T18:14:29+00:00

commit de4b5b28c87ccae4da268a53c5df135437f5cfde upstream.

This patch adds the necessary PCI ID for Intel Arrow Lake-H
devices.

Acked-by: Thinh Nguyen 
Signed-off-by: Heikki Krogerus 
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/r/20240115092820.1454492-1-heikki.krogerus@linux.intel.com
Signed-off-by: Greg Kroah-Hartman

xhci: handle isoc Babble and Buffer Overrun events properly

2024-02-16T18:14:28+00:00

commit 7c4650ded49e5b88929ecbbb631efb8b0838e811 upstream.

xHCI 4.9 explicitly forbids assuming that the xHC has released its
ownership of a multi-TRB TD when it reports an error on one of the
early TRBs. Yet the driver makes such assumption and releases the TD,
allowing the remaining TRBs to be freed or overwritten by new TDs.

The xHC should also report completion of the final TRB due to its IOC
flag being set by us, regardless of prior errors. This event cannot
be recognized if the TD has already been freed earlier, resulting in
"Transfer event TRB DMA ptr not part of current TD" error message.

Fix this by reusing the logic for processing isoc Transaction Errors.
This also handles hosts which fail to report the final completion.

Fix transfer length reporting on Babble errors. They may be caused by
device malfunction, no guarantee that the buffer has been filled.

Signed-off-by: Michal Pecio 
Cc: stable@vger.kernel.org
Signed-off-by: Mathias Nyman 
Link: https://lore.kernel.org/r/20240125152737.2983959-5-mathias.nyman@linux.intel.com
Signed-off-by: Greg Kroah-Hartman

xhci: process isoc TD properly when there was a transaction error mid TD.

2024-02-16T18:14:28+00:00

commit 5372c65e1311a16351ef03dd096ff576e6477674 upstream.

The last TRB of a isoc TD might not trigger an event if there was
an error event for a TRB mid TD. This is seen on a NEC Corporation
uPD720200 USB 3.0 Host

After an error mid a multi-TRB TD the xHC should according to xhci 4.9.1
generate events for passed TRBs with IOC flag set if it proceeds to the
next TD. This event is either a copy of the original error, or a
"success" transfer event.

If that event is missing then the driver and xHC host get out of sync as
the driver is still expecting a transfer event for that first TD, while
xHC host is already sending events for the next TD in the list.
This leads to
"Transfer event TRB DMA ptr not part of current TD" messages.

As a solution we tag the isoc TDs that get error events mid TD.
If an event doesn't match the first TD, then check if the tag is
set, and event points to the next TD.
In that case give back the fist TD and process the next TD normally

Make sure TD status and transferred length stay valid in both cases
with and without final TD completion event.

Reported-by: Michał Pecio 
Closes: https://lore.kernel.org/linux-usb/20240112235205.1259f60c@foxbook/
Tested-by: Michał Pecio 
Cc: stable@vger.kernel.org
Signed-off-by: Mathias Nyman 
Link: https://lore.kernel.org/r/20240125152737.2983959-4-mathias.nyman@linux.intel.com
Signed-off-by: Greg Kroah-Hartman

usb: host: xhci-plat: Add support for XHCI_SG_TRB_CACHE_SIZE_QUIRK

2024-02-16T18:14:28+00:00

commit 520b391e3e813c1dd142d1eebb3ccfa6d08c3995 upstream.

Upstream commit bac1ec551434 ("usb: xhci: Set quirk for
XHCI_SG_TRB_CACHE_SIZE_QUIRK") introduced a new quirk in XHCI
which fixes XHC timeout, which was seen on synopsys XHCs while
using SG buffers. Currently this quirk can only be set using
xhci private data. But there are some drivers like dwc3/host.c
which adds adds quirks using software node for xhci device.
Hence set this xhci quirk by iterating over device properties.

Cc: stable@vger.kernel.org # 5.11
Fixes: bac1ec551434 ("usb: xhci: Set quirk for XHCI_SG_TRB_CACHE_SIZE_QUIRK")
Signed-off-by: Prashanth K 
Link: https://lore.kernel.org/r/20240116055816.1169821-3-quic_prashk@quicinc.com
Signed-off-by: Greg Kroah-Hartman