linux-stable.git/drivers, branch v6.6.9 Linux kernel stable tree spi: cadence: revert "Add SPI transfer delays" 2024-01-01T12:42:47+00:00 Nam Cao namcao@linutronix.de 2023-12-06T14:52:33+00:00 883b9f52b705278eca84357dd09ac3983c64535f commit 7a733e060bd20edb63b1f27f0b29cf9b184e0e8b upstream. The commit 855a40cd8ccc ("spi: cadence: Add SPI transfer delays") adds a delay after each transfer into the driver's transfer_one(). However, the delay is already done in SPI core. So this commit unnecessarily doubles the delay amount. Revert this commit. Signed-off-by: Nam Cao <namcao@linutronix.de> Link: https://lore.kernel.org/r/20231206145233.74982-1-namcao@linutronix.de Signed-off-by: Mark Brown <broonie@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> 
commit 7a733e060bd20edb63b1f27f0b29cf9b184e0e8b upstream.

The commit 855a40cd8ccc ("spi: cadence: Add SPI transfer delays") adds a
delay after each transfer into the driver's transfer_one(). However,
the delay is already done in SPI core. So this commit unnecessarily
doubles the delay amount. Revert this commit.

Signed-off-by: Nam Cao <namcao@linutronix.de>
Link: https://lore.kernel.org/r/20231206145233.74982-1-namcao@linutronix.de
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
thunderbolt: Fix memory leak in margining_port_remove() 2024-01-01T12:42:46+00:00 Yaxiong Tian tianyaxiong@kylinos.cn 2023-11-22T08:02:43+00:00 6fbaeffc3a92b4a32b8e320e486cf644ff30d240 commit ac43c9122e4287bbdbe91e980fc2528acb72cc1e upstream. The dentry returned by debugfs_lookup() needs to be released by calling dput() which is missing in margining_port_remove(). Fix this by calling debugfs_lookup_and_remove() that combines both and avoids the memory leak. Fixes: d0f1e0c2a699 ("thunderbolt: Add support for receiver lane margining") Cc: stable@vger.kernel.org Signed-off-by: Yaxiong Tian <tianyaxiong@kylinos.cn> Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> 
commit ac43c9122e4287bbdbe91e980fc2528acb72cc1e upstream.

The dentry returned by debugfs_lookup() needs to be released by calling
dput() which is missing in margining_port_remove(). Fix this by calling
debugfs_lookup_and_remove() that combines both and avoids the memory leak.

Fixes: d0f1e0c2a699 ("thunderbolt: Add support for receiver lane margining")
Cc: stable@vger.kernel.org
Signed-off-by: Yaxiong Tian <tianyaxiong@kylinos.cn>
Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
gpio: dwapb: mask/unmask IRQ when disable/enale it 2024-01-01T12:42:46+00:00 xiongxin xiongxin@kylinos.cn 2023-12-20T02:29:01+00:00 9a6ed4ea985ac4b7a566faddeb16271b8ea54d36 commit 1cc3542c76acb5f59001e3e562eba672f1983355 upstream. In the hardware implementation of the I2C HID driver based on DesignWare GPIO IRQ chip, when the user continues to use the I2C HID device in the suspend process, the I2C HID interrupt will be masked after the resume process is finished. This is because the disable_irq()/enable_irq() of the DesignWare GPIO driver does not synchronize the IRQ mask register state. In normal use of the I2C HID procedure, the GPIO IRQ irq_mask()/irq_unmask() functions are called in pairs. In case of an exception, i2c_hid_core_suspend() calls disable_irq() to disable the GPIO IRQ. With low probability, this causes irq_unmask() to not be called, which causes the GPIO IRQ to be masked and not unmasked in enable_irq(), raising an exception. Add synchronization to the masked register state in the dwapb_irq_enable()/dwapb_irq_disable() function. mask the GPIO IRQ before disabling it. After enabling the GPIO IRQ, unmask the IRQ. Fixes: 7779b3455697 ("gpio: add a driver for the Synopsys DesignWare APB GPIO block") Cc: stable@kernel.org Co-developed-by: Riwen Lu <luriwen@kylinos.cn> Signed-off-by: Riwen Lu <luriwen@kylinos.cn> Signed-off-by: xiongxin <xiongxin@kylinos.cn> Acked-by: Serge Semin <fancer.lancer@gmail.com> Reviewed-by: Andy Shevchenko <andy@kernel.org> Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> 
commit 1cc3542c76acb5f59001e3e562eba672f1983355 upstream.

In the hardware implementation of the I2C HID driver based on DesignWare
GPIO IRQ chip, when the user continues to use the I2C HID device in the
suspend process, the I2C HID interrupt will be masked after the resume
process is finished.

This is because the disable_irq()/enable_irq() of the DesignWare GPIO
driver does not synchronize the IRQ mask register state. In normal use
of the I2C HID procedure, the GPIO IRQ irq_mask()/irq_unmask() functions
are called in pairs. In case of an exception, i2c_hid_core_suspend()
calls disable_irq() to disable the GPIO IRQ. With low probability, this
causes irq_unmask() to not be called, which causes the GPIO IRQ to be
masked and not unmasked in enable_irq(), raising an exception.

Add synchronization to the masked register state in the
dwapb_irq_enable()/dwapb_irq_disable() function. mask the GPIO IRQ
before disabling it. After enabling the GPIO IRQ, unmask the IRQ.

Fixes: 7779b3455697 ("gpio: add a driver for the Synopsys DesignWare APB GPIO block")
Cc: stable@kernel.org
Co-developed-by: Riwen Lu <luriwen@kylinos.cn>
Signed-off-by: Riwen Lu <luriwen@kylinos.cn>
Signed-off-by: xiongxin <xiongxin@kylinos.cn>
Acked-by: Serge Semin <fancer.lancer@gmail.com>
Reviewed-by: Andy Shevchenko <andy@kernel.org>
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
bus: ti-sysc: Flush posted write only after srst_udelay 2024-01-01T12:42:46+00:00 Tony Lindgren tony@atomide.com 2023-11-24T08:50:56+00:00 add8973e3de6a3557ef5fd0ecc317b24fc6efe6e commit f71f6ff8c1f682a1cae4e8d7bdeed9d7f76b8f75 upstream. Commit 34539b442b3b ("bus: ti-sysc: Flush posted write on enable before reset") caused a regression reproducable on omap4 duovero where the ISS target module can produce interconnect errors on boot. Turns out the registers are not accessible until after a delay for devices needing a ti,sysc-delay-us value. Let's fix this by flushing the posted write only after the reset delay. We do flushing also for ti,sysc-delay-us using devices as that should trigger an interconnect error if the delay is not properly configured. Let's also add some comments while at it. Fixes: 34539b442b3b ("bus: ti-sysc: Flush posted write on enable before reset") Cc: stable@vger.kernel.org Signed-off-by: Tony Lindgren <tony@atomide.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> 
commit f71f6ff8c1f682a1cae4e8d7bdeed9d7f76b8f75 upstream.

Commit 34539b442b3b ("bus: ti-sysc: Flush posted write on enable before
reset") caused a regression reproducable on omap4 duovero where the ISS
target module can produce interconnect errors on boot. Turns out the
registers are not accessible until after a delay for devices needing
a ti,sysc-delay-us value.

Let's fix this by flushing the posted write only after the reset delay.
We do flushing also for ti,sysc-delay-us using devices as that should
trigger an interconnect error if the delay is not properly configured.

Let's also add some comments while at it.

Fixes: 34539b442b3b ("bus: ti-sysc: Flush posted write on enable before reset")
Cc: stable@vger.kernel.org
Signed-off-by: Tony Lindgren <tony@atomide.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
pinctrl: starfive: jh7100: ignore disabled device tree nodes 2024-01-01T12:42:45+00:00 Nam Cao namcao@linutronix.de 2023-12-01T09:23:29+00:00 6e827b18219e8437f3840cc0ca1c9b5d6b85b03f commit 5c584f175d32f9cc66c909f851cd905da58b39ea upstream. The driver always registers pin configurations in device tree. This can cause some inconvenience to users, as pin configurations in the base device tree cannot be disabled in the device tree overlay, even when the relevant devices are not used. Ignore disabled pin configuration nodes in device tree. Fixes: ec648f6b7686 ("pinctrl: starfive: Add pinctrl driver for StarFive SoCs") Cc: <stable@vger.kernel.org> Signed-off-by: Nam Cao <namcao@linutronix.de> Link: https://lore.kernel.org/r/fe4c15dcc3074412326b8dc296b0cbccf79c49bf.1701422582.git.namcao@linutronix.de Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> 
commit 5c584f175d32f9cc66c909f851cd905da58b39ea upstream.

The driver always registers pin configurations in device tree. This can
cause some inconvenience to users, as pin configurations in the base
device tree cannot be disabled in the device tree overlay, even when the
relevant devices are not used.

Ignore disabled pin configuration nodes in device tree.

Fixes: ec648f6b7686 ("pinctrl: starfive: Add pinctrl driver for StarFive SoCs")
Cc:  <stable@vger.kernel.org>
Signed-off-by: Nam Cao <namcao@linutronix.de>
Link: https://lore.kernel.org/r/fe4c15dcc3074412326b8dc296b0cbccf79c49bf.1701422582.git.namcao@linutronix.de
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
pinctrl: starfive: jh7110: ignore disabled device tree nodes 2024-01-01T12:42:45+00:00 Nam Cao namcao@linutronix.de 2023-12-01T09:23:28+00:00 dc958dd32ce850e97377482d4b6489bfbead9613 commit f6e3b40a2c89c1d832ed9cb031dc9825bbf43b7c upstream. The driver always registers pin configurations in device tree. This can cause some inconvenience to users, as pin configurations in the base device tree cannot be disabled in the device tree overlay, even when the relevant devices are not used. Ignore disabled pin configuration nodes in device tree. Fixes: 447976ab62c5 ("pinctrl: starfive: Add StarFive JH7110 sys controller driver") Cc: <stable@vger.kernel.org> Signed-off-by: Nam Cao <namcao@linutronix.de> Link: https://lore.kernel.org/r/fd8bf044799ae50a6291ae150ef87b4f1923cacb.1701422582.git.namcao@linutronix.de Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> 
commit f6e3b40a2c89c1d832ed9cb031dc9825bbf43b7c upstream.

The driver always registers pin configurations in device tree. This can
cause some inconvenience to users, as pin configurations in the base
device tree cannot be disabled in the device tree overlay, even when the
relevant devices are not used.

Ignore disabled pin configuration nodes in device tree.

Fixes: 447976ab62c5 ("pinctrl: starfive: Add StarFive JH7110 sys controller driver")
Cc:  <stable@vger.kernel.org>
Signed-off-by: Nam Cao <namcao@linutronix.de>
Link: https://lore.kernel.org/r/fd8bf044799ae50a6291ae150ef87b4f1923cacb.1701422582.git.namcao@linutronix.de
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
dm-integrity: don't modify bio's immutable bio_vec in integrity_metadata() 2024-01-01T12:42:45+00:00 Mikulas Patocka mpatocka@redhat.com 2023-12-05T15:39:16+00:00 3b664557b12fcf8acd3df595afbd184c82a97f8b commit b86f4b790c998afdbc88fe1aa55cfe89c4068726 upstream. __bio_for_each_segment assumes that the first struct bio_vec argument doesn't change - it calls "bio_advance_iter_single((bio), &(iter), (bvl).bv_len)" to advance the iterator. Unfortunately, the dm-integrity code changes the bio_vec with "bv.bv_len -= pos". When this code path is taken, the iterator would be out of sync and dm-integrity would report errors. This happens if the machine is out of memory and "kmalloc" fails. Fix this bug by making a copy of "bv" and changing the copy instead. Fixes: 7eada909bfd7 ("dm: add integrity target") Cc: stable@vger.kernel.org # v4.12+ Signed-off-by: Mikulas Patocka <mpatocka@redhat.com> Signed-off-by: Mike Snitzer <snitzer@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> 
commit b86f4b790c998afdbc88fe1aa55cfe89c4068726 upstream.

__bio_for_each_segment assumes that the first struct bio_vec argument
doesn't change - it calls "bio_advance_iter_single((bio), &(iter),
(bvl).bv_len)" to advance the iterator. Unfortunately, the dm-integrity
code changes the bio_vec with "bv.bv_len -= pos". When this code path
is taken, the iterator would be out of sync and dm-integrity would
report errors. This happens if the machine is out of memory and
"kmalloc" fails.

Fix this bug by making a copy of "bv" and changing the copy instead.

Fixes: 7eada909bfd7 ("dm: add integrity target")
Cc: stable@vger.kernel.org	# v4.12+
Signed-off-by: Mikulas Patocka <mpatocka@redhat.com>
Signed-off-by: Mike Snitzer <snitzer@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
scsi: core: Always send batch on reset or error handling command 2024-01-01T12:42:45+00:00 Alexander Atanasov alexander.atanasov@virtuozzo.com 2023-12-15T12:10:08+00:00 d7ef2eeec259eb28c0273132c1a73aa069cab13a commit 066c5b46b6eaf2f13f80c19500dbb3b84baabb33 upstream. In commit 8930a6c20791 ("scsi: core: add support for request batching") the block layer bd->last flag was mapped to SCMD_LAST and used as an indicator to send the batch for the drivers that implement this feature. However, the error handling code was not updated accordingly. scsi_send_eh_cmnd() is used to send error handling commands and request sense. The problem is that request sense comes as a single command that gets into the batch queue and times out. As a result the device goes offline after several failed resets. This was observed on virtio_scsi during a device resize operation. [ 496.316946] sd 0:0:4:0: [sdd] tag#117 scsi_eh_0: requesting sense [ 506.786356] sd 0:0:4:0: [sdd] tag#117 scsi_send_eh_cmnd timeleft: 0 [ 506.787981] sd 0:0:4:0: [sdd] tag#117 abort To fix this always set SCMD_LAST flag in scsi_send_eh_cmnd() and scsi_reset_ioctl(). Fixes: 8930a6c20791 ("scsi: core: add support for request batching") Cc: <stable@vger.kernel.org> Signed-off-by: Alexander Atanasov <alexander.atanasov@virtuozzo.com> Link: https://lore.kernel.org/r/20231215121008.2881653-1-alexander.atanasov@virtuozzo.com Reviewed-by: Ming Lei <ming.lei@redhat.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> 
commit 066c5b46b6eaf2f13f80c19500dbb3b84baabb33 upstream.

In commit 8930a6c20791 ("scsi: core: add support for request batching") the
block layer bd->last flag was mapped to SCMD_LAST and used as an indicator
to send the batch for the drivers that implement this feature. However, the
error handling code was not updated accordingly.

scsi_send_eh_cmnd() is used to send error handling commands and request
sense. The problem is that request sense comes as a single command that
gets into the batch queue and times out. As a result the device goes
offline after several failed resets. This was observed on virtio_scsi
during a device resize operation.

[  496.316946] sd 0:0:4:0: [sdd] tag#117 scsi_eh_0: requesting sense
[  506.786356] sd 0:0:4:0: [sdd] tag#117 scsi_send_eh_cmnd timeleft: 0
[  506.787981] sd 0:0:4:0: [sdd] tag#117 abort

To fix this always set SCMD_LAST flag in scsi_send_eh_cmnd() and
scsi_reset_ioctl().

Fixes: 8930a6c20791 ("scsi: core: add support for request batching")
Cc: <stable@vger.kernel.org>
Signed-off-by: Alexander Atanasov <alexander.atanasov@virtuozzo.com>
Link: https://lore.kernel.org/r/20231215121008.2881653-1-alexander.atanasov@virtuozzo.com
Reviewed-by: Ming Lei <ming.lei@redhat.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Revert "scsi: aacraid: Reply queue mapping to CPUs based on IRQ affinity" 2024-01-01T12:42:45+00:00 Martin K. Petersen martin.petersen@oracle.com 2023-12-08T17:09:38+00:00 71758d4d87ef0ba9f2295eaa9a478f1868064db1 commit c5becf57dd5659c687d41d623a69f42d63f59eb2 upstream. This reverts commit 9dc704dcc09eae7d21b5da0615eb2ed79278f63e. Several reports have been made indicating that this commit caused hangs. Numerous attempts at root causing and fixing the issue have been unsuccessful so let's revert for now. Link: https://bugzilla.kernel.org/show_bug.cgi?id=217599 Cc: <stable@vger.kernel.org> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> 
commit c5becf57dd5659c687d41d623a69f42d63f59eb2 upstream.

This reverts commit 9dc704dcc09eae7d21b5da0615eb2ed79278f63e.

Several reports have been made indicating that this commit caused
hangs. Numerous attempts at root causing and fixing the issue have
been unsuccessful so let's revert for now.

Link: https://bugzilla.kernel.org/show_bug.cgi?id=217599
Cc: <stable@vger.kernel.org>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
nvmem: brcm_nvram: store a copy of NVRAM content 2024-01-01T12:42:44+00:00 Rafał Miłecki rafal@milecki.pl 2023-12-15T11:13:58+00:00 09283d60bc332b19d6e76cd88bd1f2cadfa49e2b commit 1e37bf84afacd5ba17b7a13a18ca2bc78aff05c0 upstream. This driver uses MMIO access for reading NVRAM from a flash device. Underneath there is a flash controller that reads data and provides mapping window. Using MMIO interface affects controller configuration and may break real controller driver. It was reported by multiple users of devices with NVRAM stored on NAND. Modify driver to read & cache NVRAM content during init and use that copy to provide NVMEM data when requested. On NAND flashes due to their alignment NVRAM partitions can be quite big (1 MiB and more) while actual NVRAM content stays quite small (usually 16 to 32 KiB). To avoid allocating so much memory check for actual data length. Link: https://lore.kernel.org/linux-mtd/CACna6rwf3_9QVjYcM+847biTX=K0EoWXuXcSMkJO1Vy_5vmVqA@mail.gmail.com/ Fixes: 3fef9ed0627a ("nvmem: brcm_nvram: new driver exposing Broadcom's NVRAM") Cc: <Stable@vger.kernel.org> Cc: Arınç ÜNAL <arinc.unal@arinc9.com> Cc: Florian Fainelli <florian.fainelli@broadcom.com> Cc: Scott Branden <scott.branden@broadcom.com> Signed-off-by: Rafał Miłecki <rafal@milecki.pl> Acked-by: Arınç ÜNAL <arinc.unal@arinc9.com> Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org> Link: https://lore.kernel.org/r/20231215111358.316727-3-srinivas.kandagatla@linaro.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> 
commit 1e37bf84afacd5ba17b7a13a18ca2bc78aff05c0 upstream.

This driver uses MMIO access for reading NVRAM from a flash device.
Underneath there is a flash controller that reads data and provides
mapping window.

Using MMIO interface affects controller configuration and may break real
controller driver. It was reported by multiple users of devices with
NVRAM stored on NAND.

Modify driver to read & cache NVRAM content during init and use that
copy to provide NVMEM data when requested. On NAND flashes due to their
alignment NVRAM partitions can be quite big (1 MiB and more) while
actual NVRAM content stays quite small (usually 16 to 32 KiB). To avoid
allocating so much memory check for actual data length.

Link: https://lore.kernel.org/linux-mtd/CACna6rwf3_9QVjYcM+847biTX=K0EoWXuXcSMkJO1Vy_5vmVqA@mail.gmail.com/
Fixes: 3fef9ed0627a ("nvmem: brcm_nvram: new driver exposing Broadcom's NVRAM")
Cc:  <Stable@vger.kernel.org>
Cc: Arınç ÜNAL <arinc.unal@arinc9.com>
Cc: Florian Fainelli <florian.fainelli@broadcom.com>
Cc: Scott Branden <scott.branden@broadcom.com>
Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
Acked-by: Arınç ÜNAL <arinc.unal@arinc9.com>
Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Link: https://lore.kernel.org/r/20231215111358.316727-3-srinivas.kandagatla@linaro.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>