linux-stable.git/drivers, branch v6.1.55

interconnect: Teach lockdep about icc_bw_lock order

2023-09-23T09:11:13+00:00

commit 13619170303878e1dae86d9a58b039475c957fcf upstream.

Teach lockdep that icc_bw_lock is needed in code paths that could
deadlock if they trigger reclaim.

Signed-off-by: Rob Clark 
Link: https://lore.kernel.org/r/20230807171148.210181-8-robdclark@gmail.com
Signed-off-by: Georgi Djakov 
Cc: Guenter Roeck 
Cc: Jon Hunter 
Signed-off-by: Greg Kroah-Hartman

drm/amdgpu: fix amdgpu_cs_p1_user_fence

2023-09-23T09:11:12+00:00

commit 35588314e963938dfdcdb792c9170108399377d6 upstream.

The offset is just 32bits here so this can potentially overflow if
somebody specifies a large value. Instead reduce the size to calculate
the last possible offset.

The error handling path incorrectly drops the reference to the user
fence BO resulting in potential reference count underflow.

Signed-off-by: Christian König 
Reviewed-by: Alex Deucher 
Signed-off-by: Alex Deucher 
Cc: stable@vger.kernel.org
Signed-off-by: Greg Kroah-Hartman

drm/amd/display: fix the white screen issue when >= 64GB DRAM

2023-09-23T09:11:12+00:00

commit ef064187a9709393a981a56cce1e31880fd97107 upstream.

Dropping bit 31:4 of page table base is wrong, it makes page table
base points to wrong address if phys addr is beyond 64GB; dropping
page_table_start/end bit 31:4 is unnecessary since dcn20_vmid_setup
will do that. Also, while we are at it, cleanup the assignments using
upper_32_bits()/lower_32_bits() and AMDGPU_GPU_PAGE_SHIFT.

Cc: stable@vger.kernel.org
Link: https://gitlab.freedesktop.org/drm/amd/-/issues/2354
Fixes: 81d0bcf99009 ("drm/amdgpu: make display pinning more flexible (v2)")
Acked-by: Harry Wentland 
Reviewed-by: Alex Deucher 
Signed-off-by: Yifan Zhang 
Co-developed-by: Hamza Mahfooz 
Signed-off-by: Hamza Mahfooz 
Signed-off-by: Alex Deucher 
Signed-off-by: Greg Kroah-Hartman

scsi: pm8001: Setup IRQs on resume

2023-09-23T09:11:12+00:00

commit c91774818b041ed290df29fb1dc0725be9b12e83 upstream.

The function pm8001_pci_resume() only calls pm8001_request_irq() without
calling pm8001_setup_irq(). This causes the IRQ allocation to fail, which
leads all drives being removed from the system.

Fix this issue by integrating the code for pm8001_setup_irq() directly
inside pm8001_request_irq() so that MSI-X setup is performed both during
normal initialization and resume operations.

Fixes: dbf9bfe61571 ("[SCSI] pm8001: add SAS/SATA HBA driver")
Cc: stable@vger.kernel.org
Signed-off-by: Damien Le Moal 
Link: https://lore.kernel.org/r/20230911232745.325149-2-dlemoal@kernel.org
Acked-by: Jack Wang 
Signed-off-by: Martin K. Petersen 
Signed-off-by: Greg Kroah-Hartman

scsi: megaraid_sas: Fix deadlock on firmware crashdump

2023-09-23T09:11:12+00:00

commit 0b0747d507bffb827e40fc0f9fb5883fffc23477 upstream.

The following processes run into a deadlock. CPU 41 was waiting for CPU 29
to handle a CSD request while holding spinlock "crashdump_lock", but CPU 29
was hung by that spinlock with IRQs disabled.

  PID: 17360    TASK: ffff95c1090c5c40  CPU: 41  COMMAND: "mrdiagd"
  !# 0 [ffffb80edbf37b58] __read_once_size at ffffffff9b871a40 include/linux/compiler.h:185:0
  !# 1 [ffffb80edbf37b58] atomic_read at ffffffff9b871a40 arch/x86/include/asm/atomic.h:27:0
  !# 2 [ffffb80edbf37b58] dump_stack at ffffffff9b871a40 lib/dump_stack.c:54:0
   # 3 [ffffb80edbf37b78] csd_lock_wait_toolong at ffffffff9b131ad5 kernel/smp.c:364:0
   # 4 [ffffb80edbf37b78] __csd_lock_wait at ffffffff9b131ad5 kernel/smp.c:384:0
   # 5 [ffffb80edbf37bf8] csd_lock_wait at ffffffff9b13267a kernel/smp.c:394:0
   # 6 [ffffb80edbf37bf8] smp_call_function_many at ffffffff9b13267a kernel/smp.c:843:0
   # 7 [ffffb80edbf37c50] smp_call_function at ffffffff9b13279d kernel/smp.c:867:0
   # 8 [ffffb80edbf37c50] on_each_cpu at ffffffff9b13279d kernel/smp.c:976:0
   # 9 [ffffb80edbf37c78] flush_tlb_kernel_range at ffffffff9b085c4b arch/x86/mm/tlb.c:742:0
   #10 [ffffb80edbf37cb8] __purge_vmap_area_lazy at ffffffff9b23a1e0 mm/vmalloc.c:701:0
   #11 [ffffb80edbf37ce0] try_purge_vmap_area_lazy at ffffffff9b23a2cc mm/vmalloc.c:722:0
   #12 [ffffb80edbf37ce0] free_vmap_area_noflush at ffffffff9b23a2cc mm/vmalloc.c:754:0
   #13 [ffffb80edbf37cf8] free_unmap_vmap_area at ffffffff9b23bb3b mm/vmalloc.c:764:0
   #14 [ffffb80edbf37cf8] remove_vm_area at ffffffff9b23bb3b mm/vmalloc.c:1509:0
   #15 [ffffb80edbf37d18] __vunmap at ffffffff9b23bb8a mm/vmalloc.c:1537:0
   #16 [ffffb80edbf37d40] vfree at ffffffff9b23bc85 mm/vmalloc.c:1612:0
   #17 [ffffb80edbf37d58] megasas_free_host_crash_buffer [megaraid_sas] at ffffffffc020b7f2 drivers/scsi/megaraid/megaraid_sas_fusion.c:3932:0
   #18 [ffffb80edbf37d80] fw_crash_state_store [megaraid_sas] at ffffffffc01f804d drivers/scsi/megaraid/megaraid_sas_base.c:3291:0
   #19 [ffffb80edbf37dc0] dev_attr_store at ffffffff9b56dd7b drivers/base/core.c:758:0
   #20 [ffffb80edbf37dd0] sysfs_kf_write at ffffffff9b326acf fs/sysfs/file.c:144:0
   #21 [ffffb80edbf37de0] kernfs_fop_write at ffffffff9b325fd4 fs/kernfs/file.c:316:0
   #22 [ffffb80edbf37e20] __vfs_write at ffffffff9b29418a fs/read_write.c:480:0
   #23 [ffffb80edbf37ea8] vfs_write at ffffffff9b294462 fs/read_write.c:544:0
   #24 [ffffb80edbf37ee8] SYSC_write at ffffffff9b2946ec fs/read_write.c:590:0
   #25 [ffffb80edbf37ee8] SyS_write at ffffffff9b2946ec fs/read_write.c:582:0
   #26 [ffffb80edbf37f30] do_syscall_64 at ffffffff9b003ca9 arch/x86/entry/common.c:298:0
   #27 [ffffb80edbf37f58] entry_SYSCALL_64 at ffffffff9ba001b1 arch/x86/entry/entry_64.S:238:0

  PID: 17355    TASK: ffff95c1090c3d80  CPU: 29  COMMAND: "mrdiagd"
  !# 0 [ffffb80f2d3c7d30] __read_once_size at ffffffff9b0f2ab0 include/linux/compiler.h:185:0
  !# 1 [ffffb80f2d3c7d30] native_queued_spin_lock_slowpath at ffffffff9b0f2ab0 kernel/locking/qspinlock.c:368:0
   # 2 [ffffb80f2d3c7d58] pv_queued_spin_lock_slowpath at ffffffff9b0f244b arch/x86/include/asm/paravirt.h:674:0
   # 3 [ffffb80f2d3c7d58] queued_spin_lock_slowpath at ffffffff9b0f244b arch/x86/include/asm/qspinlock.h:53:0
   # 4 [ffffb80f2d3c7d68] queued_spin_lock at ffffffff9b8961a6 include/asm-generic/qspinlock.h:90:0
   # 5 [ffffb80f2d3c7d68] do_raw_spin_lock_flags at ffffffff9b8961a6 include/linux/spinlock.h:173:0
   # 6 [ffffb80f2d3c7d68] __raw_spin_lock_irqsave at ffffffff9b8961a6 include/linux/spinlock_api_smp.h:122:0
   # 7 [ffffb80f2d3c7d68] _raw_spin_lock_irqsave at ffffffff9b8961a6 kernel/locking/spinlock.c:160:0
   # 8 [ffffb80f2d3c7d88] fw_crash_buffer_store [megaraid_sas] at ffffffffc01f8129 drivers/scsi/megaraid/megaraid_sas_base.c:3205:0
   # 9 [ffffb80f2d3c7dc0] dev_attr_store at ffffffff9b56dd7b drivers/base/core.c:758:0
   #10 [ffffb80f2d3c7dd0] sysfs_kf_write at ffffffff9b326acf fs/sysfs/file.c:144:0
   #11 [ffffb80f2d3c7de0] kernfs_fop_write at ffffffff9b325fd4 fs/kernfs/file.c:316:0
   #12 [ffffb80f2d3c7e20] __vfs_write at ffffffff9b29418a fs/read_write.c:480:0
   #13 [ffffb80f2d3c7ea8] vfs_write at ffffffff9b294462 fs/read_write.c:544:0
   #14 [ffffb80f2d3c7ee8] SYSC_write at ffffffff9b2946ec fs/read_write.c:590:0
   #15 [ffffb80f2d3c7ee8] SyS_write at ffffffff9b2946ec fs/read_write.c:582:0
   #16 [ffffb80f2d3c7f30] do_syscall_64 at ffffffff9b003ca9 arch/x86/entry/common.c:298:0
   #17 [ffffb80f2d3c7f58] entry_SYSCALL_64 at ffffffff9ba001b1 arch/x86/entry/entry_64.S:238:0

The lock is used to synchronize different sysfs operations, it doesn't
protect any resource that will be touched by an interrupt. Consequently
it's not required to disable IRQs. Replace the spinlock with a mutex to fix
the deadlock.

Signed-off-by: Junxiao Bi 
Link: https://lore.kernel.org/r/20230828221018.19471-1-junxiao.bi@oracle.com
Reviewed-by: Mike Christie 
Cc: stable@vger.kernel.org
Signed-off-by: Martin K. Petersen 
Signed-off-by: Greg Kroah-Hartman

ata: libahci: clear pending interrupt status

2023-09-23T09:11:12+00:00

commit 737dd811a3dbfd7edd4ad2ba5152e93d99074f83 upstream.

When a CRC error occurs, the HBA asserts an interrupt to indicate an
interface fatal error (PxIS.IFS). The ISR clears PxIE and PxIS, then
does error recovery. If the adapter receives another SDB FIS
with an error (PxIS.TFES) from the device before the start of the EH
recovery process, the interrupt signaling the new SDB cannot be
serviced as PxIE was cleared already. This in turn results in the HBA
inability to issue any command during the error recovery process after
setting PxCMD.ST to 1 because PxIS.TFES is still set.

According to AHCI 1.3.1 specifications section 6.2.2, fatal errors
notified by setting PxIS.HBFS, PxIS.HBDS, PxIS.IFS or PxIS.TFES will
cause the HBA to enter the ERR:Fatal state. In this state, the HBA
shall not issue any new commands.

To avoid this situation, introduce the function
ahci_port_clear_pending_irq() to clear pending interrupts before
executing a COMRESET. This follows the AHCI 1.3.1 - section 6.2.2.2
specification.

Signed-off-by: Szuying Chen 
Fixes: e0bfd149973d ("[PATCH] ahci: stop engine during hard reset")
Cc: stable@vger.kernel.org
Reviewed-by: Niklas Cassel 
Signed-off-by: Damien Le Moal 
Signed-off-by: Greg Kroah-Hartman

ata: libata: disallow dev-initiated LPM transitions to unsupported states

2023-09-23T09:11:12+00:00

commit 24e0e61db3cb86a66824531989f1df80e0939f26 upstream.

In AHCI 1.3.1, the register description for CAP.SSC:
"When cleared to ‘0’, software must not allow the HBA to initiate
transitions to the Slumber state via agressive link power management nor
the PxCMD.ICC field in each port, and the PxSCTL.IPM field in each port
must be programmed to disallow device initiated Slumber requests."

In AHCI 1.3.1, the register description for CAP.PSC:
"When cleared to ‘0’, software must not allow the HBA to initiate
transitions to the Partial state via agressive link power management nor
the PxCMD.ICC field in each port, and the PxSCTL.IPM field in each port
must be programmed to disallow device initiated Partial requests."

Ensure that we always set the corresponding bits in PxSCTL.IPM, such that
a device is not allowed to initiate transitions to power states which are
unsupported by the HBA.

DevSleep is always initiated by the HBA, however, for completeness, set the
corresponding bit in PxSCTL.IPM such that agressive link power management
cannot transition to DevSleep if DevSleep is not supported.

sata_link_scr_lpm() is used by libahci, ata_piix and libata-pmp.
However, only libahci has the ability to read the CAP/CAP2 register to see
if these features are supported. Therefore, in order to not introduce any
regressions on ata_piix or libata-pmp, create flags that indicate that the
respective feature is NOT supported. This way, the behavior for ata_piix
and libata-pmp should remain unchanged.

This change is based on a patch originally submitted by Runa Guo-oc.

Signed-off-by: Niklas Cassel 
Fixes: 1152b2617a6e ("libata: implement sata_link_scr_lpm() and make ata_dev_set_feature() global")
Cc: stable@vger.kernel.org
Signed-off-by: Damien Le Moal 
Signed-off-by: Greg Kroah-Hartman

i2c: aspeed: Reset the i2c controller when timeout occurs

2023-09-23T09:11:12+00:00

commit fee465150b458351b6d9b9f66084f3cc3022b88b upstream.

Reset the i2c controller when an i2c transfer timeout occurs.
The remaining interrupts and device should be reset to avoid
unpredictable controller behavior.

Fixes: 2e57b7cebb98 ("i2c: aspeed: Add multi-master use case support")
Cc:  # v5.1+
Signed-off-by: Tommy Huang 
Reviewed-by: Andi Shyti 
Signed-off-by: Wolfram Sang 
Signed-off-by: Greg Kroah-Hartman

dm: don't attempt to queue IO under RCU protection

2023-09-23T09:11:10+00:00

commit a9ce385344f916cd1c36a33905e564f5581beae9 upstream.

dm looks up the table for IO based on the request type, with an
assumption that if the request is marked REQ_NOWAIT, it's fine to
attempt to submit that IO while under RCU read lock protection. This
is not OK, as REQ_NOWAIT just means that we should not be sleeping
waiting on other IO, it does not mean that we can't potentially
schedule.

A simple test case demonstrates this quite nicely:

int main(int argc, char *argv[])
{
        struct iovec iov;
        int fd;

        fd = open("/dev/dm-0", O_RDONLY | O_DIRECT);
        posix_memalign(&iov.iov_base, 4096, 4096);
        iov.iov_len = 4096;
        preadv2(fd, &iov, 1, 0, RWF_NOWAIT);
        return 0;
}

which will instantly spew:

BUG: sleeping function called from invalid context at include/linux/sched/mm.h:306
in_atomic(): 0, irqs_disabled(): 0, non_block: 0, pid: 5580, name: dm-nowait
preempt_count: 0, expected: 0
RCU nest depth: 1, expected: 0
INFO: lockdep is turned off.
CPU: 7 PID: 5580 Comm: dm-nowait Not tainted 6.6.0-rc1-g39956d2dcd81 #132
Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.16.2-debian-1.16.2-1 04/01/2014
Call Trace:
 
 dump_stack_lvl+0x11d/0x1b0
 __might_resched+0x3c3/0x5e0
 ? preempt_count_sub+0x150/0x150
 mempool_alloc+0x1e2/0x390
 ? mempool_resize+0x7d0/0x7d0
 ? lock_sync+0x190/0x190
 ? lock_release+0x4b7/0x670
 ? internal_get_user_pages_fast+0x868/0x2d40
 bio_alloc_bioset+0x417/0x8c0
 ? bvec_alloc+0x200/0x200
 ? internal_get_user_pages_fast+0xb8c/0x2d40
 bio_alloc_clone+0x53/0x100
 dm_submit_bio+0x27f/0x1a20
 ? lock_release+0x4b7/0x670
 ? blk_try_enter_queue+0x1a0/0x4d0
 ? dm_dax_direct_access+0x260/0x260
 ? rcu_is_watching+0x12/0xb0
 ? blk_try_enter_queue+0x1cc/0x4d0
 __submit_bio+0x239/0x310
 ? __bio_queue_enter+0x700/0x700
 ? kvm_clock_get_cycles+0x40/0x60
 ? ktime_get+0x285/0x470
 submit_bio_noacct_nocheck+0x4d9/0xb80
 ? should_fail_request+0x80/0x80
 ? preempt_count_sub+0x150/0x150
 ? lock_release+0x4b7/0x670
 ? __bio_add_page+0x143/0x2d0
 ? iov_iter_revert+0x27/0x360
 submit_bio_noacct+0x53e/0x1b30
 submit_bio_wait+0x10a/0x230
 ? submit_bio_wait_endio+0x40/0x40
 __blkdev_direct_IO_simple+0x4f8/0x780
 ? blkdev_bio_end_io+0x4c0/0x4c0
 ? stack_trace_save+0x90/0xc0
 ? __bio_clone+0x3c0/0x3c0
 ? lock_release+0x4b7/0x670
 ? lock_sync+0x190/0x190
 ? atime_needs_update+0x3bf/0x7e0
 ? timestamp_truncate+0x21b/0x2d0
 ? inode_owner_or_capable+0x240/0x240
 blkdev_direct_IO.part.0+0x84a/0x1810
 ? rcu_is_watching+0x12/0xb0
 ? lock_release+0x4b7/0x670
 ? blkdev_read_iter+0x40d/0x530
 ? reacquire_held_locks+0x4e0/0x4e0
 ? __blkdev_direct_IO_simple+0x780/0x780
 ? rcu_is_watching+0x12/0xb0
 ? __mark_inode_dirty+0x297/0xd50
 ? preempt_count_add+0x72/0x140
 blkdev_read_iter+0x2a4/0x530
 do_iter_readv_writev+0x2f2/0x3c0
 ? generic_copy_file_range+0x1d0/0x1d0
 ? fsnotify_perm.part.0+0x25d/0x630
 ? security_file_permission+0xd8/0x100
 do_iter_read+0x31b/0x880
 ? import_iovec+0x10b/0x140
 vfs_readv+0x12d/0x1a0
 ? vfs_iter_read+0xb0/0xb0
 ? rcu_is_watching+0x12/0xb0
 ? rcu_is_watching+0x12/0xb0
 ? lock_release+0x4b7/0x670
 do_preadv+0x1b3/0x260
 ? do_readv+0x370/0x370
 __x64_sys_preadv2+0xef/0x150
 do_syscall_64+0x39/0xb0
 entry_SYSCALL_64_after_hwframe+0x63/0xcd
RIP: 0033:0x7f5af41ad806
Code: 41 54 41 89 fc 55 44 89 c5 53 48 89 cb 48 83 ec 18 80 3d e4 dd 0d 00 00 74 7a 45 89 c1 49 89 ca 45 31 c0 b8 47 01 00 00 0f 05 <48> 3d 00 f0 ff ff 0f 87 be 00 00 00 48 85 c0 79 4a 48 8b 0d da 55
RSP: 002b:00007ffd3145c7f0 EFLAGS: 00000246 ORIG_RAX: 0000000000000147
RAX: ffffffffffffffda RBX: 0000000000000000 RCX: 00007f5af41ad806
RDX: 0000000000000001 RSI: 00007ffd3145c850 RDI: 0000000000000003
RBP: 0000000000000008 R08: 0000000000000000 R09: 0000000000000008
R10: 0000000000000000 R11: 0000000000000246 R12: 0000000000000003
R13: 00007ffd3145c850 R14: 000055f5f0431dd8 R15: 0000000000000001
 

where in fact it is dm itself that attempts to allocate a bio clone with
GFP_NOIO under the rcu read lock, regardless of the request type.

Fix this by getting rid of the special casing for REQ_NOWAIT, and just
use the normal SRCU protected table lookup. Get rid of the bio based
table locking helpers at the same time, as they are now unused.

Cc: stable@vger.kernel.org
Fixes: 563a225c9fd2 ("dm: introduce dm_{get,put}_live_table_bio called from dm_submit_bio")
Signed-off-by: Jens Axboe 
Signed-off-by: Mike Snitzer 
Signed-off-by: Greg Kroah-Hartman

Revert "drm/amd: Disable S/G for APUs when 64GB or more host memory"

2023-09-23T09:11:10+00:00

commit 169ed4ece8373f02f10642eae5240e3d1ef5c038 upstream.

This reverts commit 70e64c4d522b732e31c6475a3be2349de337d321.

Since, we now have an actual fix for this issue, we can get rid of this
workaround as it can cause pin failures if enough VRAM isn't carved out
by the BIOS.

Cc: stable@vger.kernel.org # 6.1+
Acked-by: Harry Wentland 
Reviewed-by: Alex Deucher 
Signed-off-by: Hamza Mahfooz 
Signed-off-by: Alex Deucher 
Signed-off-by: Greg Kroah-Hartman