linux-stable.git/drivers, branch v5.8.8

net: usb: Fix uninit-was-stored issue in asix_read_phy_addr()

2020-09-09T17:14:34+00:00

commit a092b7233f0e000cc6f2c71a49e2ecc6f917a5fc upstream.

The buffer size is 2 Bytes and we expect to receive the same amount of
data. But sometimes we receive less data and run into uninit-was-stored
issue upon read. Hence modify the error check on the return value to match
with the buffer size as a prevention.

Reported-and-tested by: syzbot+a7e220df5a81d1ab400e@syzkaller.appspotmail.com
Signed-off-by: Himadri Pandya 
Signed-off-by: David S. Miller 
Signed-off-by: Greg Kroah-Hartman

sdhci: tegra: Add missing TMCLK for data timeout

2020-09-09T17:14:33+00:00

commit 8048822bac01936fda2c7b924a52131da81e6198 upstream.

commit b5a84ecf025a ("mmc: tegra: Add Tegra210 support")

Tegra210 and later has a separate sdmmc_legacy_tm (TMCLK) used by Tegra
SDMMC hawdware for data timeout to achive better timeout than using
SDCLK and using TMCLK is recommended.

USE_TMCLK_FOR_DATA_TIMEOUT bit in Tegra SDMMC register
SDHCI_TEGRA_VENDOR_SYS_SW_CTRL can be used to choose either TMCLK or
SDCLK for data timeout.

Default USE_TMCLK_FOR_DATA_TIMEOUT bit is set to 1 and TMCLK is used
for data timeout by Tegra SDMMC hardware and having TMCLK not enabled
is not recommended.

So, this patch adds quirk NVQUIRK_HAS_TMCLK for SoC having separate
timeout clock and keeps TMCLK enabled all the time.

Fixes: b5a84ecf025a ("mmc: tegra: Add Tegra210 support")
Cc: stable  # 5.4
Tested-by: Jon Hunter 
Reviewed-by: Jon Hunter 
Acked-by: Adrian Hunter 
Signed-off-by: Sowjanya Komatineni 
Link: https://lore.kernel.org/r/1598548861-32373-8-git-send-email-skomatineni@nvidia.com
Signed-off-by: Ulf Hansson 
Signed-off-by: Greg Kroah-Hartman

dm thin metadata: Fix use-after-free in dm_bm_set_read_only

2020-09-09T17:14:32+00:00

commit 3a653b205f29b3f9827a01a0c88bfbcb0d169494 upstream.

The following error ocurred when testing disk online/offline:

[  301.798344] device-mapper: thin: 253:5: aborting current metadata transaction
[  301.848441] device-mapper: thin: 253:5: failed to abort metadata transaction
[  301.849206] Aborting journal on device dm-26-8.
[  301.850489] EXT4-fs error (device dm-26) in __ext4_new_inode:943: Journal has aborted
[  301.851095] EXT4-fs (dm-26): Delayed block allocation failed for inode 398742 at logical offset 181 with max blocks 19 with error 30
[  301.854476] BUG: KASAN: use-after-free in dm_bm_set_read_only+0x3a/0x40 [dm_persistent_data]

Reason is:

 metadata_operation_failed
    abort_transaction
        dm_pool_abort_metadata
	    __create_persistent_data_objects
	        r = __open_or_format_metadata
	        if (r) --> If failed will free pmd->bm but pmd->bm not set NULL
		    dm_block_manager_destroy(pmd->bm);
    set_pool_mode
	dm_pool_metadata_read_only(pool->pmd);
	dm_bm_set_read_only(pmd->bm);  --> use-after-free

Add checks to see if pmd->bm is NULL in dm_bm_set_read_only and
dm_bm_set_read_write functions.  If bm is NULL it means creating the
bm failed and so dm_bm_is_read_only must return true.

Signed-off-by: Ye Bin 
Cc: stable@vger.kernel.org
Signed-off-by: Mike Snitzer 
Signed-off-by: Greg Kroah-Hartman

dm thin metadata: Avoid returning cmd->bm wild pointer on error

2020-09-09T17:14:32+00:00

commit 219403d7e56f9b716ad80ab87db85d29547ee73e upstream.

Maybe __create_persistent_data_objects() caller will use PTR_ERR as a
pointer, it will lead to some strange things.

Signed-off-by: Ye Bin 
Cc: stable@vger.kernel.org
Signed-off-by: Mike Snitzer 
Signed-off-by: Greg Kroah-Hartman

dm cache metadata: Avoid returning cmd->bm wild pointer on error

2020-09-09T17:14:32+00:00

commit d16ff19e69ab57e08bf908faaacbceaf660249de upstream.

Maybe __create_persistent_data_objects() caller will use PTR_ERR as a
pointer, it will lead to some strange things.

Signed-off-by: Ye Bin 
Cc: stable@vger.kernel.org
Signed-off-by: Mike Snitzer 
Signed-off-by: Greg Kroah-Hartman

dm crypt: Initialize crypto wait structures

2020-09-09T17:14:31+00:00

commit 7785a9e4c228db6d01086a52d5685cd7336a08b7 upstream.

Use the DECLARE_CRYPTO_WAIT() macro to properly initialize the crypto
wait structures declared on stack before their use with
crypto_wait_req().

Fixes: 39d13a1ac41d ("dm crypt: reuse eboiv skcipher for IV generation")
Fixes: bbb1658461ac ("dm crypt: Implement Elephant diffuser for Bitlocker compatibility")
Cc: stable@vger.kernel.org
Signed-off-by: Damien Le Moal 
Signed-off-by: Mike Snitzer 
Signed-off-by: Greg Kroah-Hartman

dm integrity: fix error reporting in bitmap mode after creation

2020-09-09T17:14:31+00:00

commit e27fec66f0a94e35a35548bd0b29ae616e62ec62 upstream.

The dm-integrity target did not report errors in bitmap mode just after
creation. The reason is that the function integrity_recalc didn't clean up
ic->recalc_bitmap as it proceeded with recalculation.

Fix this by updating the bitmap accordingly -- the double shift serves
to rounddown.

Signed-off-by: Mikulas Patocka 
Fixes: 468dfca38b1a ("dm integrity: add a bitmap mode")
Cc: stable@vger.kernel.org # v5.2+
Signed-off-by: Mike Snitzer 
Signed-off-by: Greg Kroah-Hartman

dm mpath: fix racey management of PG initialization

2020-09-09T17:14:31+00:00

commit c322ee9320eaa4013ca3620b1130992916b19b31 upstream.

Commit 935fcc56abc3 ("dm mpath: only flush workqueue when needed")
changed flush_multipath_work() to avoid needless workqueue
flushing (of a multipath global workqueue). But that change didn't
realize the surrounding flush_multipath_work() code should also only
run if 'pg_init_in_progress' is set.

Fix this by only doing all of flush_multipath_work()'s PG init related
work if 'pg_init_in_progress' is set.

Otherwise multipath_wait_for_pg_init_completion() will run
unconditionally but the preceeding flush_workqueue(kmpath_handlerd)
may not. This could lead to deadlock (though only if kmpath_handlerd
never runs a corresponding work to decrement 'pg_init_in_progress').

It could also be, though highly unlikely, that the kmpath_handlerd
work that does PG init completes before 'pg_init_in_progress' is set,
and then an intervening DM table reload's multipath_postsuspend()
triggers flush_multipath_work().

Fixes: 935fcc56abc3 ("dm mpath: only flush workqueue when needed")
Cc: stable@vger.kernel.org
Reported-by: Ben Marzinski 
Signed-off-by: Mike Snitzer 
Signed-off-by: Greg Kroah-Hartman

dm writecache: handle DAX to partitions on persistent memory correctly

2020-09-09T17:14:31+00:00

commit f9e040efcc28309e5c592f7e79085a9a52e31f58 upstream.

The function dax_direct_access doesn't take partitions into account,
it always maps pages from the beginning of the device. Therefore,
persistent_memory_claim() must get the partition offset using
get_start_sect() and add it to the page offsets passed to
dax_direct_access().

Signed-off-by: Mikulas Patocka 
Fixes: 48debafe4f2f ("dm: add writecache target")
Cc: stable@vger.kernel.org # 4.18+
Signed-off-by: Mike Snitzer 
Signed-off-by: Greg Kroah-Hartman

drm/amdgpu: Specify get_argument function for ci_smu_funcs

2020-09-09T17:14:31+00:00

commit f7b2e34b4afb8d712913dc199d3292ea9e078637 upstream.

Starting in Linux 5.8, the graphics and memory clock frequency were not being
reported for CIK cards. This is a regression, since they were reported correctly
in Linux 5.7.

After investigation, I discovered that the smum_send_msg_to_smc() function,
attempts to call the corresponding get_argument() function of ci_smu_funcs.
However, the get_argument() function is not defined in ci_smu_funcs.

This patch fixes the bug by specifying the correct get_argument() function.

Fixes: a0ec225633d9f6 ("drm/amd/powerplay: unified interfaces for message issuing and response checking")
Signed-off-by: Sandeep Raghuraman 
Signed-off-by: Alex Deucher 
Cc: stable@vger.kernel.org
Signed-off-by: Greg Kroah-Hartman