linux-stable.git/drivers, branch v5.4.97

usb: host: xhci: mvebu: make USB 3.0 PHY optional for Armada 3720

2021-02-10T08:25:33+00:00

commit 3241929b67d28c83945d3191c6816a3271fd6b85 upstream.

Older ATF does not provide SMC call for USB 3.0 phy power on functionality
and therefore initialization of xhci-hcd is failing when older version of
ATF is used. In this case phy_power_on() function returns -EOPNOTSUPP.

[    3.108467] mvebu-a3700-comphy d0018300.phy: unsupported SMC call, try updating your firmware
[    3.117250] phy phy-d0018300.phy.0: phy poweron failed --> -95
[    3.123465] xhci-hcd: probe of d0058000.usb failed with error -95

This patch introduces a new plat_setup callback for xhci platform drivers
which is called prior calling usb_add_hcd() function. This function at its
beginning skips PHY init if hcd->skip_phy_initialization is set.

Current init_quirk callback for xhci platform drivers is called from
xhci_plat_setup() function which is called after chip reset completes.
It happens in the middle of the usb_add_hcd() function and therefore this
callback cannot be used for setting if PHY init should be skipped or not.

For Armada 3720 this patch introduce a new xhci_mvebu_a3700_plat_setup()
function configured as a xhci platform plat_setup callback. This new
function calls phy_power_on() and in case it returns -EOPNOTSUPP then
XHCI_SKIP_PHY_INIT quirk is set to instruct xhci-plat to skip PHY
initialization.

This patch fixes above failure by ignoring 'not supported' error in
xhci-hcd driver. In this case it is expected that phy is already power on.

It fixes initialization of xhci-hcd on Espressobin boards where is older
Marvell's Arm Trusted Firmware without SMC call for USB 3.0 phy power.

This is regression introduced in commit bd3d25b07342 ("arm64: dts: marvell:
armada-37xx: link USB hosts with their PHYs") where USB 3.0 phy was defined
and therefore xhci-hcd on Espressobin with older ATF started failing.

Fixes: bd3d25b07342 ("arm64: dts: marvell: armada-37xx: link USB hosts with their PHYs")
Cc:  # 5.1+: ea17a0f153af: phy: marvell: comphy: Convert internal SMCC firmware return codes to errno
Cc:  # 5.1+: f768e718911e: usb: host: xhci-plat: add priv quirk for skip PHY initialization
Tested-by: Tomasz Maciej Nowak 
Tested-by: Yoshihiro Shimoda  # On R-Car
Reviewed-by: Yoshihiro Shimoda  # xhci-plat
Acked-by: Mathias Nyman 
Signed-off-by: Pali Rohár 
Link: https://lore.kernel.org/r/20210201150803.7305-1-pali@kernel.org
[pali: Backported to 5.4 by replacing of_phy_put() with phy_put()]
Signed-off-by: Pali Rohár 
Signed-off-by: Greg Kroah-Hartman

net: dsa: mv88e6xxx: override existent unicast portvec in port_fdb_add

2021-02-10T08:25:33+00:00

commit f72f2fb8fb6be095b98af5d740ac50cffd0b0cae upstream.

Having multiple destination ports for a unicast address does not make
sense.
Make port_db_load_purge override existent unicast portvec instead of
adding a new port bit.

Fixes: 884729399260 ("net: dsa: mv88e6xxx: handle multiple ports in ATU")
Signed-off-by: DENG Qingfang 
Reviewed-by: Vladimir Oltean 
Link: https://lore.kernel.org/r/20210130134334.10243-1-dqfext@gmail.com
Signed-off-by: Jakub Kicinski 
Signed-off-by: Greg Kroah-Hartman

igc: Report speed and duplex as unknown when device is runtime suspended

2021-02-10T08:25:32+00:00

commit 2e99dedc73f004f650b197c9b269c15c7e01ad15 upstream.

Similar to commit 165ae7a8feb5 ("igb: Report speed and duplex as unknown
when device is runtime suspended"), if we try to read speed and duplex
sysfs while the device is runtime suspended, igc will complain and
stops working:

[  123.449883] igc 0000:03:00.0 enp3s0: PCIe link lost, device now detached
[  123.450052] BUG: kernel NULL pointer dereference, address: 0000000000000008
[  123.450056] #PF: supervisor read access in kernel mode
[  123.450058] #PF: error_code(0x0000) - not-present page
[  123.450059] PGD 0 P4D 0
[  123.450064] Oops: 0000 [#1] SMP NOPTI
[  123.450068] CPU: 0 PID: 2525 Comm: udevadm Tainted: G     U  W  OE     5.10.0-1002-oem #2+rkl2-Ubuntu
[  123.450078] RIP: 0010:igc_rd32+0x1c/0x90 [igc]
[  123.450080] Code: c0 5d c3 b8 fd ff ff ff c3 0f 1f 44 00 00 0f 1f 44 00 00 55 89 f0 48 89 e5 41 56 41 55 41 54 49 89 c4 53 48 8b 57 08 48 01 d0 <44> 8b 28 41 83 fd ff 74 0c 5b 44 89 e8 41 5c 41 5d 4

[  123.450083] RSP: 0018:ffffb0d100d6fcc0 EFLAGS: 00010202
[  123.450085] RAX: 0000000000000008 RBX: ffffb0d100d6fd30 RCX: 0000000000000000
[  123.450087] RDX: 0000000000000000 RSI: 0000000000000008 RDI: ffff945a12716c10
[  123.450089] RBP: ffffb0d100d6fce0 R08: ffff945a12716550 R09: ffff945a09874000
[  123.450090] R10: 0000000000000000 R11: 0000000000000000 R12: 0000000000000008
[  123.450092] R13: ffff945a12716000 R14: ffff945a037da280 R15: ffff945a037da290
[  123.450094] FS:  00007f3b34c868c0(0000) GS:ffff945b89200000(0000) knlGS:0000000000000000
[  123.450096] CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[  123.450098] CR2: 0000000000000008 CR3: 00000001144de006 CR4: 0000000000770ef0
[  123.450100] PKRU: 55555554
[  123.450101] Call Trace:
[  123.450111]  igc_ethtool_get_link_ksettings+0xd6/0x1b0 [igc]
[  123.450118]  __ethtool_get_link_ksettings+0x71/0xb0
[  123.450123]  duplex_show+0x74/0xc0
[  123.450129]  dev_attr_show+0x1d/0x40
[  123.450134]  sysfs_kf_seq_show+0xa1/0x100
[  123.450137]  kernfs_seq_show+0x27/0x30
[  123.450142]  seq_read+0xb7/0x400
[  123.450148]  ? common_file_perm+0x72/0x170
[  123.450151]  kernfs_fop_read+0x35/0x1b0
[  123.450155]  vfs_read+0xb5/0x1b0
[  123.450157]  ksys_read+0x67/0xe0
[  123.450160]  __x64_sys_read+0x1a/0x20
[  123.450164]  do_syscall_64+0x38/0x90
[  123.450168]  entry_SYSCALL_64_after_hwframe+0x44/0xa9
[  123.450170] RIP: 0033:0x7f3b351fe142
[  123.450173] Code: c0 e9 c2 fe ff ff 50 48 8d 3d 3a ca 0a 00 e8 f5 19 02 00 0f 1f 44 00 00 f3 0f 1e fa 64 8b 04 25 18 00 00 00 85 c0 75 10 0f 05 <48> 3d 00 f0 ff ff 77 56 c3 0f 1f 44 00 00 48 83 ec 28 48 89 54 24
[  123.450174] RSP: 002b:00007fffef2ec138 EFLAGS: 00000246 ORIG_RAX: 0000000000000000
[  123.450177] RAX: ffffffffffffffda RBX: 0000000000000000 RCX: 00007f3b351fe142
[  123.450179] RDX: 0000000000001001 RSI: 00005644c047f070 RDI: 0000000000000003
[  123.450180] RBP: 00007fffef2ec340 R08: 00005644c047f070 R09: 00007f3b352d9320
[  123.450182] R10: 00005644c047c010 R11: 0000000000000246 R12: 00005644c047cbf0
[  123.450184] R13: 00005644c047e6d0 R14: 0000000000000003 R15: 00007fffef2ec140
[  123.450189] Modules linked in: rfcomm ccm cmac algif_hash algif_skcipher af_alg bnep toshiba_acpi industrialio toshiba_haps hp_accel lis3lv02d btusb btrtl btbcm btintel bluetooth ecdh_generic ecc joydev input_leds nls_iso8859_1 snd_sof_pci snd_sof_intel_byt snd_sof_intel_ipc snd_sof_intel_hda_common snd_soc_hdac_hda snd_hda_codec_hdmi snd_sof_xtensa_dsp snd_sof_intel_hda snd_sof snd_hda_ext_core snd_soc_acpi_intel_match snd_soc_acpi snd_hda_codec_realtek snd_hda_codec_generic ledtrig_audio snd_hda_intel snd_intel_dspcfg soundwire_intel soundwire_generic_allocation soundwire_cadence snd_hda_codec snd_hda_core ath10k_pci snd_hwdep intel_rapl_msr intel_rapl_common ath10k_core soundwire_bus snd_soc_core x86_pkg_temp_thermal ath intel_powerclamp snd_compress ac97_bus snd_pcm_dmaengine mac80211 snd_pcm coretemp snd_seq_midi snd_seq_midi_event snd_rawmidi kvm_intel cfg80211 snd_seq snd_seq_device snd_timer mei_hdcp kvm libarc4 snd crct10dif_pclmul ghash_clmulni_intel aesni_intel
 mei_me dell_wmi
[  123.450266]  dell_smbios soundcore sparse_keymap dcdbas crypto_simd cryptd mei dell_uart_backlight glue_helper ee1004 wmi_bmof intel_wmi_thunderbolt dell_wmi_descriptor mac_hid efi_pstore acpi_pad acpi_tad intel_cstate sch_fq_codel parport_pc ppdev lp parport ip_tables x_tables autofs4 btrfs blake2b_generic raid10 raid456 async_raid6_recov async_memcpy async_pq async_xor async_tx xor raid6_pq libcrc32c raid1 raid0 multipath linear dm_mirror dm_region_hash dm_log hid_generic usbhid hid i915 i2c_algo_bit drm_kms_helper syscopyarea sysfillrect sysimgblt fb_sys_fops cec crc32_pclmul rc_core drm intel_lpss_pci i2c_i801 ahci igc intel_lpss i2c_smbus idma64 xhci_pci libahci virt_dma xhci_pci_renesas wmi video pinctrl_tigerlake
[  123.450335] CR2: 0000000000000008
[  123.450338] ---[ end trace 9f731e38b53c35cc ]---

The more generic approach will be wrap get_link_ksettings() with begin()
and complete() callbacks, and calls runtime resume and runtime suspend
routine respectively. However, igc is like igb, runtime resume routine
uses rtnl_lock() which upper ethtool layer also uses.

So to prevent a deadlock on rtnl, take a different approach, use
pm_runtime_suspended() to avoid reading register while device is runtime
suspended.

Fixes: 8c5ad0dae93c ("igc: Add ethtool support")
Signed-off-by: Kai-Heng Feng 
Acked-by: Sasha Neftin 
Signed-off-by: Tony Nguyen 
Signed-off-by: Greg Kroah-Hartman

md: Set prev_flush_start and flush_bio in an atomic way

2021-02-10T08:25:32+00:00

commit dc5d17a3c39b06aef866afca19245a9cfb533a79 upstream.

One customer reports a crash problem which causes by flush request. It
triggers a warning before crash.

        /* new request after previous flush is completed */
        if (ktime_after(req_start, mddev->prev_flush_start)) {
                WARN_ON(mddev->flush_bio);
                mddev->flush_bio = bio;
                bio = NULL;
        }

The WARN_ON is triggered. We use spin lock to protect prev_flush_start and
flush_bio in md_flush_request. But there is no lock protection in
md_submit_flush_data. It can set flush_bio to NULL first because of
compiler reordering write instructions.

For example, flush bio1 sets flush bio to NULL first in
md_submit_flush_data. An interrupt or vmware causing an extended stall
happen between updating flush_bio and prev_flush_start. Because flush_bio
is NULL, flush bio2 can get the lock and submit to underlayer disks. Then
flush bio1 updates prev_flush_start after the interrupt or extended stall.

Then flush bio3 enters in md_flush_request. The start time req_start is
behind prev_flush_start. The flush_bio is not NULL(flush bio2 hasn't
finished). So it can trigger the WARN_ON now. Then it calls INIT_WORK
again. INIT_WORK() will re-initialize the list pointers in the
work_struct, which then can result in a corrupted work list and the
work_struct queued a second time. With the work list corrupted, it can
lead in invalid work items being used and cause a crash in
process_one_work.

We need to make sure only one flush bio can be handled at one same time.
So add spin lock in md_submit_flush_data to protect prev_flush_start and
flush_bio in an atomic way.

Reviewed-by: David Jeffery 
Signed-off-by: Xiao Ni 
Signed-off-by: Song Liu 
Signed-off-by: Jack Wang 
Signed-off-by: Greg Kroah-Hartman

iommu/vt-d: Do not use flush-queue when caching-mode is on

2021-02-10T08:25:32+00:00

commit 29b32839725f8c89a41cb6ee054c85f3116ea8b5 upstream.

When an Intel IOMMU is virtualized, and a physical device is
passed-through to the VM, changes of the virtual IOMMU need to be
propagated to the physical IOMMU. The hypervisor therefore needs to
monitor PTE mappings in the IOMMU page-tables. Intel specifications
provide "caching-mode" capability that a virtual IOMMU uses to report
that the IOMMU is virtualized and a TLB flush is needed after mapping to
allow the hypervisor to propagate virtual IOMMU mappings to the physical
IOMMU. To the best of my knowledge no real physical IOMMU reports
"caching-mode" as turned on.

Synchronizing the virtual and the physical IOMMU tables is expensive if
the hypervisor is unaware which PTEs have changed, as the hypervisor is
required to walk all the virtualized tables and look for changes.
Consequently, domain flushes are much more expensive than page-specific
flushes on virtualized IOMMUs with passthrough devices. The kernel
therefore exploited the "caching-mode" indication to avoid domain
flushing and use page-specific flushing in virtualized environments. See
commit 78d5f0f500e6 ("intel-iommu: Avoid global flushes with caching
mode.")

This behavior changed after commit 13cf01744608 ("iommu/vt-d: Make use
of iova deferred flushing"). Now, when batched TLB flushing is used (the
default), full TLB domain flushes are performed frequently, requiring
the hypervisor to perform expensive synchronization between the virtual
TLB and the physical one.

Getting batched TLB flushes to use page-specific invalidations again in
such circumstances is not easy, since the TLB invalidation scheme
assumes that "full" domain TLB flushes are performed for scalability.

Disable batched TLB flushes when caching-mode is on, as the performance
benefit from using batched TLB invalidations is likely to be much
smaller than the overhead of the virtual-to-physical IOMMU page-tables
synchronization.

Fixes: 13cf01744608 ("iommu/vt-d: Make use of iova deferred flushing")
Signed-off-by: Nadav Amit 
Cc: David Woodhouse 
Cc: Lu Baolu 
Cc: Joerg Roedel 
Cc: Will Deacon 
Cc: stable@vger.kernel.org
Acked-by: Lu Baolu 
Link: https://lore.kernel.org/r/20210127175317.1600473-1-namit@vmware.com
Signed-off-by: Joerg Roedel 
Signed-off-by: Nadav Amit 
Signed-off-by: Greg Kroah-Hartman

Input: xpad - sync supported devices with fork on GitHub

2021-02-10T08:25:32+00:00

commit 9bbd77d5bbc9aff8cb74d805c31751f5f0691ba8 upstream.

There is a fork of this driver on GitHub [0] that has been updated
with new device IDs.

Merge those into the mainline driver, so the out-of-tree fork is not
needed for users of those devices anymore.

[0] https://github.com/paroj/xpad

Signed-off-by: Benjamin Valentin 
Link: https://lore.kernel.org/r/20210121142523.1b6b050f@rechenknecht2k11
Signed-off-by: Dmitry Torokhov 
Signed-off-by: Greg Kroah-Hartman

iwlwifi: mvm: don't send RFH_QUEUE_CONFIG_CMD with no queues

2021-02-10T08:25:32+00:00

commit 64f55156f7adedb1ac5bb9cdbcbc9ac05ff5a724 upstream.

If we have only a single RX queue, such as when MSI-X is not
available, we should not send the RFH_QUEUEU_CONFIG_CMD, because our
only queue is the same as the command queue and will be configured as
part of the context info.  Our code was actually trying to send the
command with 0 queues, which caused UMAC assert 0x1D04.

Fix that by not sending the command when we have a single queue.

Signed-off-by: Luca Coelho 
Signed-off-by: Kalle Valo 
Link: https://lore.kernel.org/r/iwlwifi.20201008180656.c35eeb3299f8.I08f79a6ebe150a7d180b7005b24504bfdba6d8b5@changeid
Signed-off-by: Greg Kroah-Hartman

nvme-pci: avoid the deepest sleep state on Kingston A2000 SSDs

2021-02-10T08:25:30+00:00

commit 538e4a8c571efdf131834431e0c14808bcfb1004 upstream.

Some Kingston A2000 NVMe SSDs sooner or later get confused and stop
working when they use the deepest APST sleep while running Linux. The
system then crashes and one has to cold boot it to get the SSD working
again.

Kingston seems to known about this since at least mid-September 2020:
https://bbs.archlinux.org/viewtopic.php?pid=1926994#p1926994

Someone working for a German company representing Kingston to the German
press confirmed to me Kingston engineering is aware of the issue and
investigating; the person stated that to their current knowledge only
the deepest APST sleep state causes trouble. Therefore, make Linux avoid
it for now by applying the NVME_QUIRK_NO_DEEPEST_PS to this SSD.

I have two such SSDs, but it seems the problem doesn't occur with them.
I hence couldn't verify if this patch really fixes the problem, but all
the data in front of me suggests it should.

This patch can easily be reverted or improved upon if a better solution
surfaces.

FWIW, there are many reports about the issue scattered around the web;
most of the users disabled APST completely to make things work, some
just made Linux avoid the deepest sleep state:

https://bugzilla.kernel.org/show_bug.cgi?id=195039#c65
https://bugzilla.kernel.org/show_bug.cgi?id=195039#c73
https://bugzilla.kernel.org/show_bug.cgi?id=195039#c74
https://bugzilla.kernel.org/show_bug.cgi?id=195039#c78
https://bugzilla.kernel.org/show_bug.cgi?id=195039#c79
https://bugzilla.kernel.org/show_bug.cgi?id=195039#c80
https://askubuntu.com/questions/1222049/nvmekingston-a2000-sometimes-stops-giving-response-in-ubuntu-18-04dell-inspir
https://community.acer.com/en/discussion/604326/m-2-nvme-ssd-aspire-517-51g-issue-compatibility-kingston-a2000-linux-ubuntu

For the record, some data from 'nvme id-ctrl /dev/nvme0'

NVME Identify Controller:
vid       : 0x2646
ssvid     : 0x2646
mn        : KINGSTON SA2000M81000G
fr        : S5Z42105
[...]
ps    0 : mp:9.00W operational enlat:0 exlat:0 rrt:0 rrl:0
          rwt:0 rwl:0 idle_power:- active_power:-
ps    1 : mp:4.60W operational enlat:0 exlat:0 rrt:1 rrl:1
          rwt:1 rwl:1 idle_power:- active_power:-
ps    2 : mp:3.80W operational enlat:0 exlat:0 rrt:2 rrl:2
          rwt:2 rwl:2 idle_power:- active_power:-
ps    3 : mp:0.0450W non-operational enlat:2000 exlat:2000 rrt:3 rrl:3
          rwt:3 rwl:3 idle_power:- active_power:-
ps    4 : mp:0.0040W non-operational enlat:15000 exlat:15000 rrt:4 rrl:4
          rwt:4 rwl:4 idle_power:- active_power:-

Cc: stable@vger.kernel.org # 4.14+
Signed-off-by: Thorsten Leemhuis 
Signed-off-by: Christoph Hellwig 
Signed-off-by: Greg Kroah-Hartman

drm/amd/display: Revert "Fix EDID parsing after resume from suspend"

2021-02-10T08:25:30+00:00

commit 1a10e5244778169a5a53a527d7830cf0438132a1 upstream.

This reverts commit b24bdc37d03a0478189e20a50286092840f414fa.
It caused memory leak after S3 on 4K HDMI displays.

Signed-off-by: Stylon Wang 
Reviewed-by: Rodrigo Siqueira 
Acked-by: Anson Jacob 
Tested-by: Daniel Wheeler 
Signed-off-by: Alex Deucher 
Cc: stable@vger.kernel.org
Signed-off-by: Greg Kroah-Hartman

mmc: core: Limit retries when analyse of SDIO tuples fails

2021-02-10T08:25:30+00:00

commit f92e04f764b86e55e522988e6f4b6082d19a2721 upstream.

When analysing tuples fails we may loop indefinitely to retry. Let's avoid
this by using a 10s timeout and bail if not completed earlier.

Signed-off-by: Fengnan Chang 
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/r/20210123033230.36442-1-fengnanchang@gmail.com
Signed-off-by: Ulf Hansson 
Signed-off-by: Greg Kroah-Hartman