linux-stable.git/drivers, branch v5.4.167

hwmon: (dell-smm) Fix warning on /proc/i8k creation error

2021-12-17T09:12:24+00:00

commit dbd3e6eaf3d813939b28e8a66e29d81cdc836445 upstream.

The removal function is called regardless of whether
/proc/i8k was created successfully or not, the later
causing a WARN() on module removal.
Fix that by only registering the removal function
if /proc/i8k was created successfully.

Tested on a Inspiron 3505.

Fixes: 039ae58503f3 ("hwmon: Allow to compile dell-smm-hwmon driver without /proc/i8k")
Signed-off-by: Armin Wolf 
Acked-by: Pali Rohár 
Link: https://lore.kernel.org/r/20211112171440.59006-1-W_Armin@gmx.de
Signed-off-by: Guenter Roeck 
Signed-off-by: Greg Kroah-Hartman

drm/amd/display: add connector type check for CRC source set

2021-12-17T09:12:24+00:00

[ Upstream commit 2da34b7bb59e1caa9a336e0e20a76b8b6a4abea2 ]

[Why]
IGT bypass test will set crc source as DPRX,and display DM didn`t check
connection type, it run the test on the HDMI connector ,then the kernel
will be crashed because aux->transfer is set null for HDMI connection.
This patch will skip the invalid connection test and fix kernel crash issue.

[How]
Check the connector type while setting the pipe crc source as DPRX or
auto,if the type is not DP or eDP, the crtc crc source will not be set
and report error code to IGT test,IGT will show the this subtest as no
valid crtc/connector combinations found.

116.779714] [IGT] amd_bypass: starting subtest 8bpc-bypass-mode
[ 117.730996] BUG: kernel NULL pointer dereference, address: 0000000000000000
[ 117.731001] #PF: supervisor instruction fetch in kernel mode
[ 117.731003] #PF: error_code(0x0010) - not-present page
[ 117.731004] PGD 0 P4D 0
[ 117.731006] Oops: 0010 [#1] SMP NOPTI
[ 117.731009] CPU: 11 PID: 2428 Comm: amd_bypass Tainted: G OE 5.11.0-34-generic #36~20.04.1-Ubuntu
[ 117.731011] Hardware name: AMD CZN/, BIOS AB.FD 09/07/2021
[ 117.731012] RIP: 0010:0x0
[ 117.731015] Code: Unable to access opcode bytes at RIP 0xffffffffffffffd6.
[ 117.731016] RSP: 0018:ffffa8d64225bab8 EFLAGS: 00010246
[ 117.731017] RAX: 0000000000000000 RBX: 0000000000000020 RCX: ffffa8d64225bb5e
[ 117.731018] RDX: ffff93151d921880 RSI: ffffa8d64225bac8 RDI: ffff931511a1a9d8
[ 117.731022] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[ 117.731023] CR2: ffffffffffffffd6 CR3: 000000010d5a4000 CR4: 0000000000750ee0
[ 117.731023] PKRU: 55555554
[ 117.731024] Call Trace:
[ 117.731027] drm_dp_dpcd_access+0x72/0x110 [drm_kms_helper]
[ 117.731036] drm_dp_dpcd_read+0xb7/0xf0 [drm_kms_helper]
[ 117.731040] drm_dp_start_crc+0x38/0xb0 [drm_kms_helper]
[ 117.731047] amdgpu_dm_crtc_set_crc_source+0x1ae/0x3e0 [amdgpu]
[ 117.731149] crtc_crc_open+0x174/0x220 [drm]
[ 117.731162] full_proxy_open+0x168/0x1f0
[ 117.731165] ? open_proxy_open+0x100/0x100

BugLink: https://gitlab.freedesktop.org/drm/amd/-/issues/1546
Reviewed-by: Harry Wentland 
Reviewed-by: Rodrigo Siqueira 
Signed-off-by: Perry Yuan 
Signed-off-by: Alex Deucher 
Signed-off-by: Sasha Levin

drm/amd/display: Fix for the no Audio bug with Tiled Displays

2021-12-17T09:12:24+00:00

[ Upstream commit 5ceaebcda9061c04f439c93961f0819878365c0f ]

[WHY]
It seems like after a series of plug/unplugs we end up in a situation
where tiled display doesnt support Audio.

[HOW]
The issue seems to be related to when we check streams changed after an
HPD, we should be checking the audio_struct as well to see if any of its
values changed.

Reviewed-by: Jun Lei 
Acked-by: Bhawanpreet Lakha 
Signed-off-by: Mustapha Ghaddar 
Tested-by: Daniel Wheeler 
Signed-off-by: Alex Deucher 
Signed-off-by: Sasha Levin

i2c: rk3x: Handle a spurious start completion interrupt flag

2021-12-17T09:12:23+00:00

[ Upstream commit 02fe0fbd8a21e183687925c3a266ae27dda9840f ]

In a typical read transfer, start completion flag is being set after
read finishes (notice ipd bit 4 being set):

trasnfer poll=0
i2c start
rk3x-i2c fdd40000.i2c: IRQ: state 1, ipd: 10
i2c read
rk3x-i2c fdd40000.i2c: IRQ: state 2, ipd: 1b
i2c stop
rk3x-i2c fdd40000.i2c: IRQ: state 4, ipd: 33

This causes I2C transfer being aborted in polled mode from a stop completion
handler:

trasnfer poll=1
i2c start
rk3x-i2c fdd40000.i2c: IRQ: state 1, ipd: 10
i2c read
rk3x-i2c fdd40000.i2c: IRQ: state 2, ipd: 0
rk3x-i2c fdd40000.i2c: IRQ: state 2, ipd: 1b
i2c stop
rk3x-i2c fdd40000.i2c: IRQ: state 4, ipd: 13
i2c stop
rk3x-i2c fdd40000.i2c: unexpected irq in STOP: 0x10

Clearing the START flag after read fixes the issue without any obvious
side effects.

This issue was dicovered on RK3566 when adding support for powering
off the RK817 PMIC.

Signed-off-by: Ondrej Jirman 
Reviewed-by: John Keeping 
Signed-off-by: Wolfram Sang 
Signed-off-by: Sasha Levin

parisc/agp: Annotate parisc agp init functions with __init

2021-12-17T09:12:23+00:00

[ Upstream commit 8d88382b7436551a9ebb78475c546b670790cbf6 ]

Signed-off-by: Helge Deller 
Reported-by: kernel test robot 
Signed-off-by: Sasha Levin

net/mlx4_en: Update reported link modes for 1/10G

2021-12-17T09:12:23+00:00

[ Upstream commit 2191b1dfef7d45f44b5008d2148676d9f2c82874 ]

When link modes were initially added in commit 2c762679435dc
("net/mlx4_en: Use PTYS register to query ethtool settings") and
later updated for the new ethtool API in commit 3d8f7cc78d0eb
("net: mlx4: use new ETHTOOL_G/SSETTINGS API") the only 1/10G non-baseT
link modes configured were 1000baseKX, 10000baseKX4 and 10000baseKR.
It looks like these got picked to represent other modes since nothing
better was available.

Switch to using more specific link modes added in commit 5711a98221443
("net: ethtool: add support for 1000BaseX and missing 10G link modes").

Tested with MCX311A-XCAT connected via DAC.
Before:

% sudo ethtool enp3s0
Settings for enp3s0:
	Supported ports: [ FIBRE ]
	Supported link modes:   1000baseKX/Full
	                        10000baseKR/Full
	Supported pause frame use: Symmetric Receive-only
	Supports auto-negotiation: No
	Supported FEC modes: Not reported
	Advertised link modes:  1000baseKX/Full
	                        10000baseKR/Full
	Advertised pause frame use: Symmetric
	Advertised auto-negotiation: No
	Advertised FEC modes: Not reported
	Speed: 10000Mb/s
	Duplex: Full
	Auto-negotiation: off
	Port: Direct Attach Copper
	PHYAD: 0
	Transceiver: internal
	Supports Wake-on: d
	Wake-on: d
        Current message level: 0x00000014 (20)
                               link ifdown
	Link detected: yes

With this change:

% sudo ethtool enp3s0
	Settings for enp3s0:
	Supported ports: [ FIBRE ]
	Supported link modes:   1000baseX/Full
	                        10000baseCR/Full
 	                        10000baseSR/Full
	Supported pause frame use: Symmetric Receive-only
	Supports auto-negotiation: No
	Supported FEC modes: Not reported
	Advertised link modes:  1000baseX/Full
 	                        10000baseCR/Full
 	                        10000baseSR/Full
	Advertised pause frame use: Symmetric
	Advertised auto-negotiation: No
	Advertised FEC modes: Not reported
	Speed: 10000Mb/s
	Duplex: Full
	Auto-negotiation: off
	Port: Direct Attach Copper
	PHYAD: 0
	Transceiver: internal
	Supports Wake-on: d
	Wake-on: d
        Current message level: 0x00000014 (20)
                               link ifdown
	Link detected: yes

Tested-by: Michael Stapelberg 
Signed-off-by: Erik Ekman 
Reviewed-by: Tariq Toukan 
Signed-off-by: David S. Miller 
Signed-off-by: Sasha Levin

drm/msm/dsi: set default num_data_lanes

2021-12-17T09:12:23+00:00

[ Upstream commit cd92cc187c053ab010a1570e2d61d68394a5c725 ]

If "data_lanes" property of the dsi output endpoint is missing in
the DT, num_data_lanes would be 0 by default, which could cause
dsi_host_attach() to fail if dsi->lanes is set to a non-zero value
by the bridge driver.

According to the binding document of msm dsi controller, the
input/output endpoint of the controller is expected to have 4 lanes.
So let's set num_data_lanes to 4 by default.

Signed-off-by: Philip Chen 
Reviewed-by: Douglas Anderson 
Reviewed-by: Stephen Boyd 
Link: https://lore.kernel.org/r/20211030100812.1.I6cd9af36b723fed277d34539d3b2ba4ca233ad2d@changeid
Signed-off-by: Rob Clark 
Signed-off-by: Sasha Levin

misc: fastrpc: fix improper packet size calculation

2021-12-14T13:49:06+00:00

commit 3a1bf591e9a410f220b7405a142a47407394a1d5 upstream.

The buffer list is sorted and this is not being considered while
calculating packet size. This would lead to improper copy length
calculation for non-dmaheap buffers which would eventually cause
sending improper buffers to DSP.

Fixes: c68cfb718c8f ("misc: fastrpc: Add support for context Invoke method")
Reviewed-by: Srinivas Kandagatla 
Signed-off-by: Jeya R 
Link: https://lore.kernel.org/r/1637771481-4299-1-git-send-email-jeyr@codeaurora.org
Signed-off-by: Greg Kroah-Hartman

irqchip: nvic: Fix offset for Interrupt Priority Offsets

2021-12-14T13:49:06+00:00

commit c5e0cbe2858d278a27d5b3fe31890aea5be064c4 upstream.

According to ARM(v7M) ARM Interrupt Priority Offsets located at
0xE000E400-0xE000E5EC, while 0xE000E300-0xE000E33C covers read-only
Interrupt Active Bit Registers

Fixes: 292ec080491d ("irqchip: Add support for ARMv7-M NVIC")
Signed-off-by: Vladimir Murzin 
Signed-off-by: Marc Zyngier 
Link: https://lore.kernel.org/r/20211201110259.84857-1-vladimir.murzin@arm.com
Signed-off-by: Greg Kroah-Hartman

irqchip/irq-gic-v3-its.c: Force synchronisation when issuing INVALL

2021-12-14T13:49:06+00:00

commit b383a42ca523ce54bcbd63f7c8f3cf974abc9b9a upstream.

INVALL CMD specifies that the ITS must ensure any caching associated with
the interrupt collection defined by ICID is consistent with the LPI
configuration tables held in memory for all Redistributors. SYNC is
required to ensure that INVALL is executed.

Currently, LPI configuration data may be inconsistent with that in the
memory within a short period of time after the INVALL command is executed.

Signed-off-by: Wudi Wang 
Signed-off-by: Shaokun Zhang 
Signed-off-by: Marc Zyngier 
Fixes: cc2d3216f53c ("irqchip: GICv3: ITS command queue")
Link: https://lore.kernel.org/r/20211208015429.5007-1-zhangshaokun@hisilicon.com
Signed-off-by: Greg Kroah-Hartman