linux-stable.git/drivers, branch v5.4.145

PCI: Call Max Payload Size-related fixup quirks early

2021-09-12T06:56:42+00:00

commit b8da302e2955fe4d41eb9d48199242674d77dbe0 upstream.

pci_device_add() calls HEADER fixups after pci_configure_device(), which
configures Max Payload Size.

Convert MPS-related fixups to EARLY fixups so pci_configure_mps() takes
them into account.

Fixes: 27d868b5e6cfa ("PCI: Set MPS to match upstream bridge")
Link: https://lore.kernel.org/r/20210624171418.27194-1-kabel@kernel.org
Signed-off-by: Marek Behún 
Signed-off-by: Bjorn Helgaas 
Cc: stable@vger.kernel.org
Signed-off-by: Greg Kroah-Hartman

xhci: fix unsafe memory usage in xhci tracing

2021-09-12T06:56:41+00:00

commit cbf286e8ef8337308c259ff5b9ce2e74d403be5a upstream.

Removes static char buffer usage in the following decode functions:
	xhci_decode_trb()
	xhci_decode_ptortsc()

Caller must provide a buffer to use.
In tracing use __get_str() as recommended to pass buffer.

Minor chanes are needed in xhci debugfs code as these functions are also
used there. Changes include moving XHCI_MSG_MAX definititon from
xhci-trace.h to xhci.h

Cc: 
Signed-off-by: Mathias Nyman 
Link: https://lore.kernel.org/r/20210820123503.2605901-2-mathias.nyman@linux.intel.com
Signed-off-by: Greg Kroah-Hartman

usb: mtu3: fix the wrong HS mult value

2021-09-12T06:56:41+00:00

commit 44e4439d8f9f8d0e9da767d1f31e7c211081feca upstream.

usb_endpoint_maxp() returns actual max packet size, @mult will
always be zero, fix it by using usb_endpoint_maxp_mult() instead
to get mult.

Fixes: 4d79e042ed8b ("usb: mtu3: add support for usb3.1 IP")
Cc: stable@vger.kernel.org
Signed-off-by: Chunfeng Yun 
Link: https://lore.kernel.org/r/1628836253-7432-3-git-send-email-chunfeng.yun@mediatek.com
Signed-off-by: Greg Kroah-Hartman

usb: mtu3: use @mult for HS isoc or intr

2021-09-12T06:56:41+00:00

commit fd7cb394ec7efccc3985feb0978cee4d352e1817 upstream.

For HS isoc or intr, should use @mult but not @burst
to save mult value.

Fixes: 4d79e042ed8b ("usb: mtu3: add support for usb3.1 IP")
Cc: stable@vger.kernel.org
Signed-off-by: Chunfeng Yun 
Link: https://lore.kernel.org/r/1628836253-7432-2-git-send-email-chunfeng.yun@mediatek.com
Signed-off-by: Greg Kroah-Hartman

usb: host: xhci-rcar: Don't reload firmware after the completion

2021-09-12T06:56:41+00:00

commit 57f3ffdc11143f56f1314972fe86fe17a0dcde85 upstream.

According to the datasheet, "Upon the completion of FW Download,
there is no need to write or reload FW.". Otherwise, it's possible
to cause unexpected behaviors. So, adds such a condition.

Fixes: 4ac8918f3a73 ("usb: host: xhci-plat: add support for the R-Car H2 and M2 xHCI controllers")
Cc: stable@vger.kernel.org # v3.17+
Signed-off-by: Yoshihiro Shimoda 
Link: https://lore.kernel.org/r/20210827063227.81990-1-yoshihiro.shimoda.uh@renesas.com
Signed-off-by: Greg Kroah-Hartman

Revert "r8169: avoid link-up interrupt issue on RTL8106e if user enables ASPM"

2021-09-12T06:56:41+00:00

commit 2115d3d482656ea702f7cf308c0ded3500282903 upstream.

This reverts commit 1ee8856de82faec9bc8bd0f2308a7f27e30ba207.

This is used to re-enable ASPM on RTL8106e, if it is possible.

Signed-off-by: Hayes Wang 
Signed-off-by: David S. Miller 
Signed-off-by: Greg Kroah-Hartman

net: ll_temac: Remove left-over debug message

2021-09-12T06:56:41+00:00

commit ce03b94ba682a67e8233c9ee3066071656ded58f upstream.

Fixes: f63963411942 ("net: ll_temac: Avoid ndo_start_xmit returning NETDEV_TX_BUSY")
Signed-off-by: Esben Haabendal 
Signed-off-by: David S. Miller 
Signed-off-by: Greg Kroah-Hartman

USB: serial: mos7720: improve OOM-handling in read_mos_reg()

2021-09-12T06:56:40+00:00

commit 161a582bd1d8681095f158d11bc679a58f1d026b upstream.

clang static analysis reports this problem

mos7720.c:352:2: warning: Undefined or garbage value returned to caller
        return d;
        ^~~~~~~~

In the parport_mos7715_read_data()'s call to read_mos_reg(), 'd' is
only set after the alloc block.

	buf = kmalloc(1, GFP_KERNEL);
	if (!buf)
		return -ENOMEM;

Although the problem is reported in parport_most7715_read_data(),
none of the callee's of read_mos_reg() check the return status.

Make sure to clear the return-value buffer also on allocation failures.

Fixes: 0d130367abf5 ("USB: serial: mos7720: fix control-message error handling")
Signed-off-by: Tom Rix 
Link: https://lore.kernel.org/r/20210111220904.1035957-1-trix@redhat.com
[ johan: only clear the buffer on errors, amend commit message ]
Signed-off-by: Johan Hovold 
Signed-off-by: Greg Kroah-Hartman

media: stkwebcam: fix memory leak in stk_camera_probe

2021-09-12T06:56:40+00:00

commit 514e97674400462cc09c459a1ddfb9bf39017223 upstream.

My local syzbot instance hit memory leak in usb_set_configuration().
The problem was in unputted usb interface. In case of errors after
usb_get_intf() the reference should be putted to correclty free memory
allocated for this interface.

Fixes: ec16dae5453e ("V4L/DVB (7019): V4L: add support for Syntek DC1125 webcams")
Cc: stable@vger.kernel.org
Signed-off-by: Pavel Skripkin 
Signed-off-by: Hans Verkuil 
Signed-off-by: Mauro Carvalho Chehab 
Signed-off-by: Greg Kroah-Hartman

cryptoloop: add a deprecation warning

2021-09-12T06:56:40+00:00

[ Upstream commit 222013f9ac30b9cec44301daa8dbd0aae38abffb ]

Support for cryptoloop has been officially marked broken and deprecated
in favor of dm-crypt (which supports the same broken algorithms if
needed) in Linux 2.6.4 (released in March 2004), and support for it has
been entirely removed from losetup in util-linux 2.23 (released in April
2013).  Add a warning and a deprecation schedule.

Signed-off-by: Christoph Hellwig 
Link: https://lore.kernel.org/r/20210827163250.255325-1-hch@lst.de
Signed-off-by: Jens Axboe 
Signed-off-by: Sasha Levin