linux-stable.git/drivers, branch v5.18.3

pinctrl/rockchip: support setting input-enable param

2022-06-09T08:30:57+00:00

commit 42d90a1e5caf73138ddde42da5a9fe2b543f9a2c upstream.

Handle the PIN_CONFIG_INPUT_ENABLE param for configuring GPIOs as input.

Signed-off-by: Caleb Connolly 
Link: https://lore.kernel.org/r/20220328005005.72492-3-kc@postmarketos.org
Signed-off-by: Linus Walleij 
Signed-off-by: Greg Kroah-Hartman

tty: n_gsm: Fix packet data hex dump output

2022-06-09T08:30:57+00:00

commit 925ea0fa5277c1e6bb9e51955ef34eea9736c3d7 upstream.

The module param debug for n_gsm uses KERN_INFO level, but the hexdump
now uses KERN_DEBUG level. This started after commit 091cb0994edd
("lib/hexdump: make print_hex_dump_bytes() a nop on !DEBUG builds").
We now use dynamic_hex_dump() unless DEBUG is set.

This causes no packets to be seen with modprobe n_gsm debug=0x1f unlike
earlier. Let's fix this by adding gsm_hex_dump_bytes() that calls
print_hex_dump() with KERN_INFO to match what n_gsm is doing with the
other debug related output.

Fixes: 091cb0994edd ("lib/hexdump: make print_hex_dump_bytes() a nop on !DEBUG builds")
Cc: Stephen Boyd 
Signed-off-by: Tony Lindgren 
Link: https://lore.kernel.org/r/20220512131506.1216-1-tony@atomide.com
Signed-off-by: Greg Kroah-Hartman

macsec: fix UAF bug for real_dev

2022-06-09T08:30:57+00:00

commit 196a888ca6571deb344468e1d7138e3273206335 upstream.

Create a new macsec device but not get reference to real_dev. That can
not ensure that real_dev is freed after macsec. That will trigger the
UAF bug for real_dev as following:

==================================================================
BUG: KASAN: use-after-free in macsec_get_iflink+0x5f/0x70 drivers/net/macsec.c:3662
Call Trace:
 ...
 macsec_get_iflink+0x5f/0x70 drivers/net/macsec.c:3662
 dev_get_iflink+0x73/0xe0 net/core/dev.c:637
 default_operstate net/core/link_watch.c:42 [inline]
 rfc2863_policy+0x233/0x2d0 net/core/link_watch.c:54
 linkwatch_do_dev+0x2a/0x150 net/core/link_watch.c:161

Allocated by task 22209:
 ...
 alloc_netdev_mqs+0x98/0x1100 net/core/dev.c:10549
 rtnl_create_link+0x9d7/0xc00 net/core/rtnetlink.c:3235
 veth_newlink+0x20e/0xa90 drivers/net/veth.c:1748

Freed by task 8:
 ...
 kfree+0xd6/0x4d0 mm/slub.c:4552
 kvfree+0x42/0x50 mm/util.c:615
 device_release+0x9f/0x240 drivers/base/core.c:2229
 kobject_cleanup lib/kobject.c:673 [inline]
 kobject_release lib/kobject.c:704 [inline]
 kref_put include/linux/kref.h:65 [inline]
 kobject_put+0x1c8/0x540 lib/kobject.c:721
 netdev_run_todo+0x72e/0x10b0 net/core/dev.c:10327

After commit faab39f63c1f ("net: allow out-of-order netdev unregistration")
and commit e5f80fcf869a ("ipv6: give an IPv6 dev to blackhole_netdev"), we
can add dev_hold_track() in macsec_dev_init() and dev_put_track() in
macsec_free_netdev() to fix the problem.

Fixes: 2bce1ebed17d ("macsec: fix refcnt leak in module exit routine")
Reported-by: syzbot+d0e94b65ac259c29ce7a@syzkaller.appspotmail.com
Signed-off-by: Ziyang Xuan 
Link: https://lore.kernel.org/r/20220531074500.1272846-1-william.xuanziyang@huawei.com
Signed-off-by: Paolo Abeni 
Signed-off-by: Greg Kroah-Hartman

md: bcache: check the return value of kzalloc() in detached_dev_do_request()

2022-06-09T08:30:57+00:00

commit 40f567bbb3b0639d2ec7d1c6ad4b1b018f80cf19 upstream.

The function kzalloc() in detached_dev_do_request() can fail, so its
return value should be checked.

Fixes: bc082a55d25c ("bcache: fix inaccurate io state for detached bcache devices")
Reported-by: TOTE Robot 
Signed-off-by: Jia-Ju Bai 
Signed-off-by: Coly Li 
Link: https://lore.kernel.org/r/20220527152818.27545-4-colyli@suse.de
Signed-off-by: Jens Axboe 
Signed-off-by: Greg Kroah-Hartman

md: fix double free of io_acct_set bioset

2022-06-09T08:30:56+00:00

commit 42b805af102471f53e3c7867b8c2b502ea4eef7e upstream.

Now io_acct_set is alloc and free in personality. Remove the codes that
free io_acct_set in md_free and md_stop.

Fixes: 0c031fd37f69 (md: Move alloc/free acct bioset in to personality)
Signed-off-by: Xiao Ni 
Signed-off-by: Song Liu 
Signed-off-by: Greg Kroah-Hartman

md: Don't set mddev private to NULL in raid0 pers->free

2022-06-09T08:30:56+00:00

commit 0f2571ad7a30ff6b33cde142439f9378669f8b4f upstream.

In normal stop process, it does like this:
   do_md_stop
      |
   __md_stop (pers->free(); mddev->private=NULL)
      |
   md_free (free mddev)
__md_stop sets mddev->private to NULL after pers->free. The raid device
will be stopped and mddev memory is free. But in reshape, it doesn't
free the mddev and mddev will still be used in new raid.

In reshape, it first sets mddev->private to new_pers and then runs
old_pers->free(). Now raid0 sets mddev->private to NULL in raid0_free.
The new raid can't work anymore. It will panic when dereference
mddev->private because of NULL pointer dereference.

It can panic like this:
[63010.814972] kernel BUG at drivers/md/raid10.c:928!
[63010.819778] invalid opcode: 0000 [#1] PREEMPT SMP NOPTI
[63010.825011] CPU: 3 PID: 44437 Comm: md0_resync Kdump: loaded Not tainted 5.14.0-86.el9.x86_64 #1
[63010.833789] Hardware name: Dell Inc. PowerEdge R6415/07YXFK, BIOS 1.15.0 09/11/2020
[63010.841440] RIP: 0010:raise_barrier+0x161/0x170 [raid10]
[63010.865508] RSP: 0018:ffffc312408bbc10 EFLAGS: 00010246
[63010.870734] RAX: 0000000000000000 RBX: ffffa00bf7d39800 RCX: 0000000000000000
[63010.877866] RDX: 0000000000000000 RSI: 0000000000000001 RDI: ffffa00bf7d39800
[63010.884999] RBP: 0000000000000000 R08: fffffa4945e74400 R09: 0000000000000000
[63010.892132] R10: ffffa00eed02f798 R11: 0000000000000000 R12: ffffa00bbc435200
[63010.899266] R13: ffffa00bf7d39800 R14: 0000000000000400 R15: 0000000000000003
[63010.906399] FS:  0000000000000000(0000) GS:ffffa00eed000000(0000) knlGS:0000000000000000
[63010.914485] CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[63010.920229] CR2: 00007f5cfbe99828 CR3: 0000000105efe000 CR4: 00000000003506e0
[63010.927363] Call Trace:
[63010.929822]  ? bio_reset+0xe/0x40
[63010.933144]  ? raid10_alloc_init_r10buf+0x60/0xa0 [raid10]
[63010.938629]  raid10_sync_request+0x756/0x1610 [raid10]
[63010.943770]  md_do_sync.cold+0x3e4/0x94c
[63010.947698]  md_thread+0xab/0x160
[63010.951024]  ? md_write_inc+0x50/0x50
[63010.954688]  kthread+0x149/0x170
[63010.957923]  ? set_kthread_struct+0x40/0x40
[63010.962107]  ret_from_fork+0x22/0x30

Removing the code that sets mddev->private to NULL in raid0 can fix
problem.

Fixes: 0c031fd37f69 (md: Move alloc/free acct bioset in to personality)
Reported-by: Fine Fan 
Signed-off-by: Xiao Ni 
Signed-off-by: Song Liu 
Signed-off-by: Greg Kroah-Hartman

RDMA/rxe: Generate a completion for unsupported/invalid opcode

2022-06-09T08:30:56+00:00

commit 2f917af777011c88e977b9b9a5d00b280d3a59ce upstream.

Current rxe_requester() doesn't generate a completion when processing an
unsupported/invalid opcode. If rxe driver doesn't support a new opcode
(e.g. RDMA Atomic Write) and RDMA library supports it, an application
using the new opcode can reproduce this issue. Fix the issue by calling
"goto err;".

Fixes: 8700e3e7c485 ("Soft RoCE driver")
Link: https://lore.kernel.org/r/20220410113513.27537-1-yangx.jy@fujitsu.com
Signed-off-by: Xiao Yang 
Signed-off-by: Jason Gunthorpe 
Signed-off-by: Greg Kroah-Hartman

RDMA/hns: Remove the num_cqc_timer variable

2022-06-09T08:30:56+00:00

commit db5dfbf5b201df65c1f5332c4d9d5e7c2f42396b upstream.

The bt number of cqc_timer of HIP09 increases compared with that of HIP08.
Therefore, cqc_timer_bt_num and num_cqc_timer do not match. As a result,
the driver may fail to allocate cqc_timer. So the driver needs to uniquely
uses cqc_timer_bt_num to represent the bt number of cqc_timer.

Fixes: 0e40dc2f70cd ("RDMA/hns: Add timer allocation support for hip08")
Link: https://lore.kernel.org/r/20220429093545.58070-1-liangwenpeng@huawei.com
Signed-off-by: Yixing Liu 
Signed-off-by: Wenpeng Liang 
Signed-off-by: Jason Gunthorpe 
Signed-off-by: Greg Kroah-Hartman

staging: r8188eu: delete rtw_wx_read/write32()

2022-06-09T08:30:56+00:00

commit 4d0cc9e0e53e9946d7b8dc58279c62dfa7a2191b upstream.

These debugging tools let you call:

	status = usb_control_msg_recv/send(udev, 0, REALTEK_USB_VENQT_CMD_REQ,
				      REALTEK_USB_VENQT_READ/WRITE, value,
				      REALTEK_USB_VENQT_CMD_IDX, io_buf,
				      size, RTW_USB_CONTROL_MSG_TIMEOUT,
				      GFP_KERNEL);

with a user controlled "value" in the 0-0xffff range.  It's not a valid
API.

Fixes: 2b42bd58b321 ("staging: r8188eu: introduce new os_dep dir for RTL8188eu driver")
Signed-off-by: Dan Carpenter 
Link: https://lore.kernel.org/r/YoXS4OaD1oauPvmj@kili
Signed-off-by: Greg Kroah-Hartman

Revert "random: use static branch for crng_ready()"

2022-06-09T08:30:55+00:00

This reverts upstream commit f5bda35fba615ace70a656d4700423fa6c9bebee
from stable. It's not essential and will take some time during 5.19 to
work out properly.

Signed-off-by: Jason A. Donenfeld