linux-stable.git/drivers, branch v5.15.151 Linux kernel stable tree Revert "interconnect: Teach lockdep about icc_bw_lock order" 2024-03-06T14:38:50+00:00 Greg Kroah-Hartman gregkh@linuxfoundation.org 2024-03-04T13:12:15+00:00 20f5aafe521cd5e6aa8b509153b2a445393b6cdd This reverts commit e3a29b80e9e6df217dd61c670ac42864fa4a0e67 which is commit 13619170303878e1dae86d9a58b039475c957fcf upstream. It is reported to cause boot crashes in Android systems, so revert it from the stable trees for now. Cc: Rob Clark <robdclark@chromium.org> Cc: Georgi Djakov <djakov@kernel.org> Cc: Guenter Roeck <linux@roeck-us.net> Cc: Jon Hunter <jonathanh@nvidia.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> 
This reverts commit e3a29b80e9e6df217dd61c670ac42864fa4a0e67 which is
commit 13619170303878e1dae86d9a58b039475c957fcf upstream.

It is reported to cause boot crashes in Android systems, so revert it
from the stable trees for now.

Cc: Rob Clark <robdclark@chromium.org>
Cc: Georgi Djakov <djakov@kernel.org>
Cc: Guenter Roeck <linux@roeck-us.net>
Cc: Jon Hunter <jonathanh@nvidia.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Revert "interconnect: Fix locking for runpm vs reclaim" 2024-03-06T14:38:50+00:00 Greg Kroah-Hartman gregkh@linuxfoundation.org 2024-03-04T13:10:12+00:00 fe549d8e976300d0dd75bd904eb216bed8b145e0 This reverts commit 9be2957f014d91088db1eb5dd09d9a03d7184dce which is commit af42269c3523492d71ebbe11fefae2653e9cdc78 upstream. It is reported to cause boot crashes in Android systems, so revert it from the stable trees for now. Cc: Rob Clark <robdclark@chromium.org> Cc: Georgi Djakov <djakov@kernel.org> Cc: Sasha Levin <sashal@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> 
This reverts commit 9be2957f014d91088db1eb5dd09d9a03d7184dce which is
commit af42269c3523492d71ebbe11fefae2653e9cdc78 upstream.

It is reported to cause boot crashes in Android systems, so revert it
from the stable trees for now.

Cc: Rob Clark <robdclark@chromium.org>
Cc: Georgi Djakov <djakov@kernel.org>
Cc: Sasha Levin <sashal@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
gpio: fix resource unwinding order in error path 2024-03-06T14:38:50+00:00 Bartosz Golaszewski bartosz.golaszewski@linaro.org 2024-02-29T17:25:49+00:00 ead68522455b8923c7787a431bbe015a97735c9b [ Upstream commit ec5c54a9d3c4f9c15e647b049fea401ee5258696 ] Hogs are added *after* ACPI so should be removed *before* in error path. Fixes: a411e81e61df ("gpiolib: add hogs support for machine code") Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org> Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Signed-off-by: Sasha Levin <sashal@kernel.org> 
[ Upstream commit ec5c54a9d3c4f9c15e647b049fea401ee5258696 ]

Hogs are added *after* ACPI so should be removed *before* in error path.

Fixes: a411e81e61df ("gpiolib: add hogs support for machine code")
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
gpiolib: Fix the error path order in gpiochip_add_data_with_key() 2024-03-06T14:38:50+00:00 Andy Shevchenko andriy.shevchenko@linux.intel.com 2024-02-21T19:28:46+00:00 ea514ac5f1bec0b24ca72f13e361d67e1dbce7c9 [ Upstream commit e4aec4daa8c009057b5e063db1b7322252c92dc8 ] After shuffling the code, error path wasn't updated correctly. Fix it here. Fixes: 2f4133bb5f14 ("gpiolib: No need to call gpiochip_remove_pin_ranges() twice") Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org> Signed-off-by: Sasha Levin <sashal@kernel.org> 
[ Upstream commit e4aec4daa8c009057b5e063db1b7322252c92dc8 ]

After shuffling the code, error path wasn't updated correctly.
Fix it here.

Fixes: 2f4133bb5f14 ("gpiolib: No need to call gpiochip_remove_pin_ranges() twice")
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
gpio: 74x164: Enable output pins after registers are reset 2024-03-06T14:38:50+00:00 Arturas Moskvinas arturas.moskvinas@gmail.com 2024-03-01T07:12:04+00:00 c21b5ad4e79dffbe6fefd2066f35c6e04bc79737 [ Upstream commit 530b1dbd97846b110ea8a94c7cc903eca21786e5 ] Chip outputs are enabled[1] before actual reset is performed[2] which might cause pin output value to flip flop if previous pin value was set to 1. Fix that behavior by making sure chip is fully reset before all outputs are enabled. Flip-flop can be noticed when module is removed and inserted again and one of the pins was changed to 1 before removal. 100 microsecond flipping is noticeable on oscilloscope (100khz SPI bus). For a properly reset chip - output is enabled around 100 microseconds (on 100khz SPI bus) later during probing process hence should be irrelevant behavioral change. Fixes: 7ebc194d0fd4 (gpio: 74x164: Introduce 'enable-gpios' property) Link: https://elixir.bootlin.com/linux/v6.7.4/source/drivers/gpio/gpio-74x164.c#L130 [1] Link: https://elixir.bootlin.com/linux/v6.7.4/source/drivers/gpio/gpio-74x164.c#L150 [2] Signed-off-by: Arturas Moskvinas <arturas.moskvinas@gmail.com> Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org> Signed-off-by: Sasha Levin <sashal@kernel.org> 
[ Upstream commit 530b1dbd97846b110ea8a94c7cc903eca21786e5 ]

Chip outputs are enabled[1] before actual reset is performed[2] which might
cause pin output value to flip flop if previous pin value was set to 1.
Fix that behavior by making sure chip is fully reset before all outputs are
enabled.

Flip-flop can be noticed when module is removed and inserted again and one of
the pins was changed to 1 before removal. 100 microsecond flipping is
noticeable on oscilloscope (100khz SPI bus).

For a properly reset chip - output is enabled around 100 microseconds (on 100khz
SPI bus) later during probing process hence should be irrelevant behavioral
change.

Fixes: 7ebc194d0fd4 (gpio: 74x164: Introduce 'enable-gpios' property)
Link: https://elixir.bootlin.com/linux/v6.7.4/source/drivers/gpio/gpio-74x164.c#L130 [1]
Link: https://elixir.bootlin.com/linux/v6.7.4/source/drivers/gpio/gpio-74x164.c#L150 [2]
Signed-off-by: Arturas Moskvinas <arturas.moskvinas@gmail.com>
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Revert "drm/bridge: lt8912b: Register and attach our DSI device at probe" 2024-03-06T14:38:50+00:00 Max Krummenacher max.krummenacher@toradex.com 2024-02-28T14:59:45+00:00 2f3ae0905a7e287e736ae4e10646a305bc021fa9 This reverts commit ef4a40953c8076626875ff91c41e210fcee7a6fd which is commit d89078c37b10f05fa4f4791b71db2572db361b68 upstream. The commit was applied to make further commits apply cleanly, but the commit depends on other commits in the same patchset. I.e. the controlling DSI host would need a change too. Thus one would need to backport the full patchset changing the DSI hosts and all downstream DSI device drivers. Revert the commit and fix up the conflicts with the backported fixes to the lt8912b driver. Signed-off-by: Max Krummenacher <max.krummenacher@toradex.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> 
This reverts commit ef4a40953c8076626875ff91c41e210fcee7a6fd which is
commit d89078c37b10f05fa4f4791b71db2572db361b68 upstream.

The commit was applied to make further commits apply cleanly, but the
commit depends on other commits in the same patchset. I.e. the
controlling DSI host would need a change too. Thus one would need to
backport the full patchset changing the DSI hosts and all downstream
DSI device drivers.

Revert the commit and fix up the conflicts with the backported fixes
to the lt8912b driver.

Signed-off-by: Max Krummenacher <max.krummenacher@toradex.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
pmdomain: qcom: rpmhpd: Fix enabled_corner aggregation 2024-03-06T14:38:49+00:00 Bjorn Andersson quic_bjorande@quicinc.com 2024-02-27T01:49:57+00:00 07795215763659ba2037e357210ca912abb30e6b commit 2a93c6cbd5a703d44c414a3c3945a87ce11430ba upstream. Commit 'e3e56c050ab6 ("soc: qcom: rpmhpd: Make power_on actually enable the domain")' aimed to make sure that a power-domain that is being enabled without any particular performance-state requested will at least turn the rail on, to avoid filling DeviceTree with otherwise unnecessary required-opps properties. But in the event that aggregation happens on a disabled power-domain, with an enabled peer without performance-state, both the local and peer corner are 0. The peer's enabled_corner is not considered, with the result that the underlying (shared) resource is disabled. One case where this can be observed is when the display stack keeps mmcx enabled (but without a particular performance-state vote) in order to access registers and sync_state happens in the rpmhpd driver. As mmcx_ao is flushed the state of the peer (mmcx) is not considered and mmcx_ao ends up turning off "mmcx.lvl" underneath mmcx. This has been observed several times, but has been painted over in DeviceTree by adding an explicit vote for the lowest non-disabled performance-state. Fixes: e3e56c050ab6 ("soc: qcom: rpmhpd: Make power_on actually enable the domain") Reported-by: Johan Hovold <johan@kernel.org> Closes: https://lore.kernel.org/linux-arm-msm/ZdMwZa98L23mu3u6@hovoldconsulting.com/ Cc: <stable@vger.kernel.org> Signed-off-by: Bjorn Andersson <quic_bjorande@quicinc.com> Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org> Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Tested-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Reviewed-by: Abhinav Kumar <quic_abhinavk@quicinc.com> Reviewed-by: Stephen Boyd <swboyd@chromium.org> Tested-by: Johan Hovold <johan+linaro@kernel.org> Link: https://lore.kernel.org/r/20240226-rpmhpd-enable-corner-fix-v1-1-68c004cec48c@quicinc.com Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> 
commit 2a93c6cbd5a703d44c414a3c3945a87ce11430ba upstream.

Commit 'e3e56c050ab6 ("soc: qcom: rpmhpd: Make power_on actually enable
the domain")' aimed to make sure that a power-domain that is being
enabled without any particular performance-state requested will at least
turn the rail on, to avoid filling DeviceTree with otherwise unnecessary
required-opps properties.

But in the event that aggregation happens on a disabled power-domain, with
an enabled peer without performance-state, both the local and peer
corner are 0. The peer's enabled_corner is not considered, with the
result that the underlying (shared) resource is disabled.

One case where this can be observed is when the display stack keeps mmcx
enabled (but without a particular performance-state vote) in order to
access registers and sync_state happens in the rpmhpd driver. As mmcx_ao
is flushed the state of the peer (mmcx) is not considered and mmcx_ao
ends up turning off "mmcx.lvl" underneath mmcx. This has been observed
several times, but has been painted over in DeviceTree by adding an
explicit vote for the lowest non-disabled performance-state.

Fixes: e3e56c050ab6 ("soc: qcom: rpmhpd: Make power_on actually enable the domain")
Reported-by: Johan Hovold <johan@kernel.org>
Closes: https://lore.kernel.org/linux-arm-msm/ZdMwZa98L23mu3u6@hovoldconsulting.com/
Cc:  <stable@vger.kernel.org>
Signed-off-by: Bjorn Andersson <quic_bjorande@quicinc.com>
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Tested-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Reviewed-by: Abhinav Kumar <quic_abhinavk@quicinc.com>
Reviewed-by: Stephen Boyd <swboyd@chromium.org>
Tested-by: Johan Hovold <johan+linaro@kernel.org>
Link: https://lore.kernel.org/r/20240226-rpmhpd-enable-corner-fix-v1-1-68c004cec48c@quicinc.com
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
mmc: sdhci-xenon: fix PHY init clock stability 2024-03-06T14:38:49+00:00 Elad Nachman enachman@marvell.com 2024-02-22T20:09:30+00:00 5f6e8930ca963921f6b9be636b51a579a02af892 commit 8e9f25a290ae0016353c9ea13314c95fb3207812 upstream. Each time SD/mmc phy is initialized, at times, in some of the attempts, phy fails to completes its initialization which results into timeout error. Per the HW spec, it is a pre-requisite to ensure a stable SD clock before a phy initialization is attempted. Fixes: 06c8b667ff5b ("mmc: sdhci-xenon: Add support to PHYs of Marvell Xenon SDHC") Acked-by: Adrian Hunter <adrian.hunter@intel.com> Cc: stable@vger.kernel.org Signed-off-by: Elad Nachman <enachman@marvell.com> Link: https://lore.kernel.org/r/20240222200930.1277665-1-enachman@marvell.com Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> 
commit 8e9f25a290ae0016353c9ea13314c95fb3207812 upstream.

Each time SD/mmc phy is initialized, at times, in some of
the attempts, phy fails to completes its initialization
which results into timeout error. Per the HW spec, it is
a pre-requisite to ensure a stable SD clock before a phy
initialization is attempted.

Fixes: 06c8b667ff5b ("mmc: sdhci-xenon: Add support to PHYs of Marvell Xenon SDHC")
Acked-by: Adrian Hunter <adrian.hunter@intel.com>
Cc: stable@vger.kernel.org
Signed-off-by: Elad Nachman <enachman@marvell.com>
Link: https://lore.kernel.org/r/20240222200930.1277665-1-enachman@marvell.com
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
mmc: sdhci-xenon: add timeout for PHY init complete 2024-03-06T14:38:49+00:00 Elad Nachman enachman@marvell.com 2024-02-22T19:17:14+00:00 f4fae0a76ee208e91424e03bf72e1b7c1ad11a7b commit 09e23823ae9a3e2d5d20f2e1efe0d6e48cef9129 upstream. AC5X spec says PHY init complete bit must be polled until zero. We see cases in which timeout can take longer than the standard calculation on AC5X, which is expected following the spec comment above. According to the spec, we must wait as long as it takes for that bit to toggle on AC5X. Cap that with 100 delay loops so we won't get stuck forever. Fixes: 06c8b667ff5b ("mmc: sdhci-xenon: Add support to PHYs of Marvell Xenon SDHC") Acked-by: Adrian Hunter <adrian.hunter@intel.com> Cc: stable@vger.kernel.org Signed-off-by: Elad Nachman <enachman@marvell.com> Link: https://lore.kernel.org/r/20240222191714.1216470-3-enachman@marvell.com Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> 
commit 09e23823ae9a3e2d5d20f2e1efe0d6e48cef9129 upstream.

AC5X spec says PHY init complete bit must be polled until zero.
We see cases in which timeout can take longer than the standard
calculation on AC5X, which is expected following the spec comment above.
According to the spec, we must wait as long as it takes for that bit to
toggle on AC5X.
Cap that with 100 delay loops so we won't get stuck forever.

Fixes: 06c8b667ff5b ("mmc: sdhci-xenon: Add support to PHYs of Marvell Xenon SDHC")
Acked-by: Adrian Hunter <adrian.hunter@intel.com>
Cc: stable@vger.kernel.org
Signed-off-by: Elad Nachman <enachman@marvell.com>
Link: https://lore.kernel.org/r/20240222191714.1216470-3-enachman@marvell.com
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
mmc: core: Fix eMMC initialization with 1-bit bus connection 2024-03-06T14:38:49+00:00 Ivan Semenov ivan@semenov.dev 2024-02-06T17:28:45+00:00 52af4f26c02fe8453b88099369ed4a2e9e234e88 commit ff3206d2186d84e4f77e1378ba1d225633f17b9b upstream. Initializing an eMMC that's connected via a 1-bit bus is current failing, if the HW (DT) informs that 4-bit bus is supported. In fact this is a regression, as we were earlier capable of falling back to 1-bit mode, when switching to 4/8-bit bus failed. Therefore, let's restore the behaviour. Log for Samsung eMMC 5.1 chip connected via 1bit bus (only D0 pin) Before patch: [134509.044225] mmc0: switch to bus width 4 failed [134509.044509] mmc0: new high speed MMC card at address 0001 [134509.054594] mmcblk0: mmc0:0001 BGUF4R 29.1 GiB [134509.281602] mmc0: switch to bus width 4 failed [134509.282638] I/O error, dev mmcblk0, sector 0 op 0x0:(READ) flags 0x0 phys_seg 1 prio class 2 [134509.282657] Buffer I/O error on dev mmcblk0, logical block 0, async page read [134509.284598] I/O error, dev mmcblk0, sector 0 op 0x0:(READ) flags 0x0 phys_seg 1 prio class 2 [134509.284602] Buffer I/O error on dev mmcblk0, logical block 0, async page read [134509.284609] ldm_validate_partition_table(): Disk read failed. [134509.286495] I/O error, dev mmcblk0, sector 0 op 0x0:(READ) flags 0x0 phys_seg 1 prio class 2 [134509.286500] Buffer I/O error on dev mmcblk0, logical block 0, async page read [134509.288303] I/O error, dev mmcblk0, sector 0 op 0x0:(READ) flags 0x0 phys_seg 1 prio class 2 [134509.288308] Buffer I/O error on dev mmcblk0, logical block 0, async page read [134509.289540] I/O error, dev mmcblk0, sector 0 op 0x0:(READ) flags 0x0 phys_seg 1 prio class 2 [134509.289544] Buffer I/O error on dev mmcblk0, logical block 0, async page read [134509.289553] mmcblk0: unable to read partition table [134509.289728] mmcblk0boot0: mmc0:0001 BGUF4R 31.9 MiB [134509.290283] mmcblk0boot1: mmc0:0001 BGUF4R 31.9 MiB [134509.294577] I/O error, dev mmcblk0, sector 0 op 0x0:(READ) flags 0x80700 phys_seg 1 prio class 2 [134509.295835] I/O error, dev mmcblk0, sector 0 op 0x0:(READ) flags 0x0 phys_seg 1 prio class 2 [134509.295841] Buffer I/O error on dev mmcblk0, logical block 0, async page read After patch: [134551.089613] mmc0: switch to bus width 4 failed [134551.090377] mmc0: new high speed MMC card at address 0001 [134551.102271] mmcblk0: mmc0:0001 BGUF4R 29.1 GiB [134551.113365] mmcblk0: p1 p2 p3 p4 p5 p6 p7 p8 p9 p10 p11 p12 p13 p14 p15 p16 p17 p18 p19 p20 p21 [134551.114262] mmcblk0boot0: mmc0:0001 BGUF4R 31.9 MiB [134551.114925] mmcblk0boot1: mmc0:0001 BGUF4R 31.9 MiB Fixes: 577fb13199b1 ("mmc: rework selection of bus speed mode") Cc: stable@vger.kernel.org Signed-off-by: Ivan Semenov <ivan@semenov.dev> Link: https://lore.kernel.org/r/20240206172845.34316-1-ivan@semenov.dev Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> 
commit ff3206d2186d84e4f77e1378ba1d225633f17b9b upstream.

Initializing an eMMC that's connected via a 1-bit bus is current failing,
if the HW (DT) informs that 4-bit bus is supported. In fact this is a
regression, as we were earlier capable of falling back to 1-bit mode, when
switching to 4/8-bit bus failed. Therefore, let's restore the behaviour.

Log for Samsung eMMC 5.1 chip connected via 1bit bus (only D0 pin)
Before patch:
[134509.044225] mmc0: switch to bus width 4 failed
[134509.044509] mmc0: new high speed MMC card at address 0001
[134509.054594] mmcblk0: mmc0:0001 BGUF4R 29.1 GiB
[134509.281602] mmc0: switch to bus width 4 failed
[134509.282638] I/O error, dev mmcblk0, sector 0 op 0x0:(READ) flags 0x0 phys_seg 1 prio class 2
[134509.282657] Buffer I/O error on dev mmcblk0, logical block 0, async page read
[134509.284598] I/O error, dev mmcblk0, sector 0 op 0x0:(READ) flags 0x0 phys_seg 1 prio class 2
[134509.284602] Buffer I/O error on dev mmcblk0, logical block 0, async page read
[134509.284609] ldm_validate_partition_table(): Disk read failed.
[134509.286495] I/O error, dev mmcblk0, sector 0 op 0x0:(READ) flags 0x0 phys_seg 1 prio class 2
[134509.286500] Buffer I/O error on dev mmcblk0, logical block 0, async page read
[134509.288303] I/O error, dev mmcblk0, sector 0 op 0x0:(READ) flags 0x0 phys_seg 1 prio class 2
[134509.288308] Buffer I/O error on dev mmcblk0, logical block 0, async page read
[134509.289540] I/O error, dev mmcblk0, sector 0 op 0x0:(READ) flags 0x0 phys_seg 1 prio class 2
[134509.289544] Buffer I/O error on dev mmcblk0, logical block 0, async page read
[134509.289553]  mmcblk0: unable to read partition table
[134509.289728] mmcblk0boot0: mmc0:0001 BGUF4R 31.9 MiB
[134509.290283] mmcblk0boot1: mmc0:0001 BGUF4R 31.9 MiB
[134509.294577] I/O error, dev mmcblk0, sector 0 op 0x0:(READ) flags 0x80700 phys_seg 1 prio class 2
[134509.295835] I/O error, dev mmcblk0, sector 0 op 0x0:(READ) flags 0x0 phys_seg 1 prio class 2
[134509.295841] Buffer I/O error on dev mmcblk0, logical block 0, async page read

After patch:

[134551.089613] mmc0: switch to bus width 4 failed
[134551.090377] mmc0: new high speed MMC card at address 0001
[134551.102271] mmcblk0: mmc0:0001 BGUF4R 29.1 GiB
[134551.113365]  mmcblk0: p1 p2 p3 p4 p5 p6 p7 p8 p9 p10 p11 p12 p13 p14 p15 p16 p17 p18 p19 p20 p21
[134551.114262] mmcblk0boot0: mmc0:0001 BGUF4R 31.9 MiB
[134551.114925] mmcblk0boot1: mmc0:0001 BGUF4R 31.9 MiB

Fixes: 577fb13199b1 ("mmc: rework selection of bus speed mode")
Cc: stable@vger.kernel.org
Signed-off-by: Ivan Semenov <ivan@semenov.dev>
Link: https://lore.kernel.org/r/20240206172845.34316-1-ivan@semenov.dev
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>