linux-stable.git/drivers, branch v5.10.91

Input: zinitix - make sure the IRQ is allocated before it gets enabled

2022-01-11T14:25:02+00:00

commit cf73ed894ee939d6706d65e0cd186e4a64e3af6d upstream.

Since irq request is the last thing in the driver probe, it happens
later than the input device registration. This means that there is a
small time window where if the open method is called the driver will
attempt to enable not yet available irq.

Fix that by moving the irq request before the input device registration.

Reviewed-by: Linus Walleij 
Fixes: 26822652c85e ("Input: add zinitix touchscreen driver")
Signed-off-by: Nikita Travkin 
Link: https://lore.kernel.org/r/20220106072840.36851-2-nikita@trvn.ru
Signed-off-by: Dmitry Torokhov 
Signed-off-by: Greg Kroah-Hartman

drm/amd/display: Added power down for DCN10

2022-01-11T14:25:02+00:00

[ Upstream commit d97e631af2db84c8c9d63abf68d487d0bb559e4c ]

[Why]
The change of setting a timer callback on boot for 10 seconds is still
working, just lacked power down for DCN10.

[How]
Added power down for DCN10.

Tested-by: Daniel Wheeler 
Reviewed-by: Anthony Koo 
Acked-by: Rodrigo Siqueira 
Signed-off-by: Derek Lai 
Signed-off-by: Alex Deucher 
Signed-off-by: Sasha Levin

mISDN: change function names to avoid conflicts

2022-01-11T14:25:02+00:00

[ Upstream commit 8b5fdfc57cc2471179d1c51081424ded833c16c8 ]

As we build for mips, we meet following error. l1_init error with
multiple definition. Some architecture devices usually marked with
l1, l2, lxx as the start-up phase. so we change the mISDN function
names, align with Isdnl2_xxx.

mips-linux-gnu-ld: drivers/isdn/mISDN/layer1.o: in function `l1_init':
(.text+0x890): multiple definition of `l1_init'; \
arch/mips/kernel/bmips_5xxx_init.o:(.text+0xf0): first defined here
make[1]: *** [home/mips/kernel-build/linux/Makefile:1161: vmlinux] Error 1

Signed-off-by: wolfgang huang 
Reported-by: k2ci 
Signed-off-by: David S. Miller 
Signed-off-by: Sasha Levin

atlantic: Fix buff_ring OOB in aq_ring_rx_clean

2022-01-11T14:25:02+00:00

[ Upstream commit 5f50153288452e10b6edd69ec9112c49442b054a ]

The function obtain the next buffer without boundary check.
We should return with I/O error code.

The bug is found by fuzzing and the crash report is attached.
It is an OOB bug although reported as use-after-free.

[    4.804724] BUG: KASAN: use-after-free in aq_ring_rx_clean+0x1e88/0x2730 [atlantic]
[    4.805661] Read of size 4 at addr ffff888034fe93a8 by task ksoftirqd/0/9
[    4.806505]
[    4.806703] CPU: 0 PID: 9 Comm: ksoftirqd/0 Tainted: G        W         5.6.0 #34
[    4.809030] Call Trace:
[    4.809343]  dump_stack+0x76/0xa0
[    4.809755]  print_address_description.constprop.0+0x16/0x200
[    4.810455]  ? aq_ring_rx_clean+0x1e88/0x2730 [atlantic]
[    4.811234]  ? aq_ring_rx_clean+0x1e88/0x2730 [atlantic]
[    4.813183]  __kasan_report.cold+0x37/0x7c
[    4.813715]  ? aq_ring_rx_clean+0x1e88/0x2730 [atlantic]
[    4.814393]  kasan_report+0xe/0x20
[    4.814837]  aq_ring_rx_clean+0x1e88/0x2730 [atlantic]
[    4.815499]  ? hw_atl_b0_hw_ring_rx_receive+0x9a5/0xb90 [atlantic]
[    4.816290]  aq_vec_poll+0x179/0x5d0 [atlantic]
[    4.816870]  ? _GLOBAL__sub_I_65535_1_aq_pci_func_init+0x20/0x20 [atlantic]
[    4.817746]  ? __next_timer_interrupt+0xba/0xf0
[    4.818322]  net_rx_action+0x363/0xbd0
[    4.818803]  ? call_timer_fn+0x240/0x240
[    4.819302]  ? __switch_to_asm+0x40/0x70
[    4.819809]  ? napi_busy_loop+0x520/0x520
[    4.820324]  __do_softirq+0x18c/0x634
[    4.820797]  ? takeover_tasklets+0x5f0/0x5f0
[    4.821343]  run_ksoftirqd+0x15/0x20
[    4.821804]  smpboot_thread_fn+0x2f1/0x6b0
[    4.822331]  ? smpboot_unregister_percpu_thread+0x160/0x160
[    4.823041]  ? __kthread_parkme+0x80/0x100
[    4.823571]  ? smpboot_unregister_percpu_thread+0x160/0x160
[    4.824301]  kthread+0x2b5/0x3b0
[    4.824723]  ? kthread_create_on_node+0xd0/0xd0
[    4.825304]  ret_from_fork+0x35/0x40

Signed-off-by: Zekun Shen 
Signed-off-by: David S. Miller 
Signed-off-by: Sasha Levin

scsi: libiscsi: Fix UAF in iscsi_conn_get_param()/iscsi_conn_teardown()

2022-01-11T14:25:02+00:00

[ Upstream commit 1b8d0300a3e9f216ae4901bab886db7299899ec6 ]

|- iscsi_if_destroy_conn            |-dev_attr_show
 |-iscsi_conn_teardown
  |-spin_lock_bh                     |-iscsi_sw_tcp_conn_get_param

  |-kfree(conn->persistent_address)   |-iscsi_conn_get_param
  |-kfree(conn->local_ipaddr)
                                       ==>|-read persistent_address
                                       ==>|-read local_ipaddr
  |-spin_unlock_bh

When iscsi_conn_teardown() and iscsi_conn_get_param() happen in parallel, a
UAF may be triggered.

Link: https://lore.kernel.org/r/046ec8a0-ce95-d3fc-3235-666a7c65b224@huawei.com
Reported-by: Lu Tixiong 
Reviewed-by: Mike Christie 
Reviewed-by: Lee Duncan 
Signed-off-by: Lixiaokeng 
Signed-off-by: Linfeilong 
Signed-off-by: Martin K. Petersen 
Signed-off-by: Sasha Levin

usb: mtu3: fix interval value for intr and isoc

2022-01-11T14:25:02+00:00

[ Upstream commit e3d4621c22f90c33321ae6a6baab60cdb8e5a77c ]

Use the Interval value from isoc/intr endpoint descriptor, no need
minus one. The original code doesn't cause transfer error for
normal cases, but it may have side effect with respond time of ERDY
or tPingTimeout.

Signed-off-by: Chunfeng Yun 
Link: https://lore.kernel.org/r/20211218095749.6250-1-chunfeng.yun@mediatek.com
Signed-off-by: Greg Kroah-Hartman 
Signed-off-by: Sasha Levin

power: bq25890: Enable continuous conversion for ADC at charging

2022-01-11T14:25:01+00:00

commit 80211be1b9dec04cc2805d3d81e2091ecac289a1 upstream.

Instead of one shot run of ADC at beginning of charging, run continuous
conversion to ensure that all charging-related values are monitored
properly (input voltage, input current, themperature etc.).

Signed-off-by: Yauhen Kharuzhy 
Reviewed-by: Hans de Goede 
Signed-off-by: Sebastian Reichel 
Signed-off-by: Greg Kroah-Hartman

rndis_host: support Hytera digital radios

2022-01-11T14:25:01+00:00

commit 29262e1f773b4b6a43711120be564c57fca07cfb upstream.

Hytera makes a range of digital (DMR) radios. These radios can be
programmed to a allow a computer to control them over Ethernet over USB,
either using NCM or RNDIS.

This commit adds support for RNDIS for Hytera radios. I tested with a
Hytera PD785 and a Hytera MD785G. When these radios are programmed to
set up a Radio to PC Network using RNDIS, an USB interface will be added
with class 2 (Communications), subclass 2 (Abstract Modem Control) and
an interface protocol of 255 ("vendor specific" - lsusb even hints "MSFT
RNDIS?").

This patch is similar to the solution of this StackOverflow user, but
that only works for the Hytera MD785:
https://stackoverflow.com/a/53550858

To use the "Radio to PC Network" functionality of Hytera DMR radios, the
radios need to be programmed correctly in CPS (Hytera's Customer
Programming Software). "Forward to PC" should be checked in "Network"
(under "General Setting" in "Conventional") and the "USB Network
Communication Protocol" should be set to RNDIS.

Signed-off-by: Thomas Toye 
Signed-off-by: David S. Miller 
Signed-off-by: Greg Kroah-Hartman

power: reset: ltc2952: Fix use of floating point literals

2022-01-11T14:25:01+00:00

commit 644106cdb89844be2496b21175b7c0c2e0fab381 upstream.

A new commit in LLVM causes an error on the use of 'long double' when
'-mno-x87' is used, which the kernel does through an alias,
'-mno-80387' (see the LLVM commit below for more details around why it
does this).

drivers/power/reset/ltc2952-poweroff.c:162:28: error: expression requires  'long double' type support, but target 'x86_64-unknown-linux-gnu' does not support it
        data->wde_interval = 300L * 1E6L;
                                  ^
drivers/power/reset/ltc2952-poweroff.c:162:21: error: expression requires  'long double' type support, but target 'x86_64-unknown-linux-gnu' does not support it
        data->wde_interval = 300L * 1E6L;
                           ^
drivers/power/reset/ltc2952-poweroff.c:163:41: error: expression requires  'long double' type support, but target 'x86_64-unknown-linux-gnu' does not support it
        data->trigger_delay = ktime_set(2, 500L*1E6L);
                                               ^
3 errors generated.

This happens due to the use of a 'long double' literal. The 'E6' part of
'1E6L' causes the literal to be a 'double' then the 'L' suffix promotes
it to 'long double'.

There is no visible reason for floating point values in this driver, as
the values are only assigned to integer types. Use NSEC_PER_MSEC, which
is the same integer value as '1E6L', to avoid changing functionality but
fix the error.

Fixes: 6647156c00cc ("power: reset: add LTC2952 poweroff driver")
Link: https://github.com/ClangBuiltLinux/linux/issues/1497
Link: https://github.com/llvm/llvm-project/commit/a8083d42b1c346e21623a1d36d1f0cadd7801d83
Signed-off-by: Nathan Chancellor 
Reviewed-by: Nick Desaulniers 
Signed-off-by: Sebastian Reichel 
Signed-off-by: Greg Kroah-Hartman

power: supply: core: Break capacity loop

2022-01-11T14:25:01+00:00

commit 51c7b6a0398f54b9120795796a4cff4fc9634f7d upstream.

We should not go on looking for more capacity tables after
we realize we have looked at the last one in
power_supply_find_ocv2cap_table().

Fixes: 3afb50d7125b ("power: supply: core: Add some helpers to use the battery OCV capacity table")
Cc: Chunyan Zhang 
Cc: Baolin Wang 
Signed-off-by: Linus Walleij 
Reviewed-by: Baolin Wang 
Signed-off-by: Sebastian Reichel 
Signed-off-by: Greg Kroah-Hartman